Networking :: Print Wirelessly On MP800r Canon Printer?

Dec 2, 2010

I would like to know if it is possible to configure my laptop so that it can print wirelessly on my MP800r canon printer, and if so then how to configure them to make this operation possible. I'm using Ubuntu.

View 1 Replies


ADVERTISEMENT

Ubuntu Networking :: How To Get Printer To Print Wirelessly

May 19, 2011

I have an HP deskjet f4580 and I downloaded hplip and the printer prints when its plugged into the usb but not wirelessly. And I noticed an hp setup adhoc on my network connections but I couldnt get on it. I'm nearly certain its something I am missing just don't know what..? and I have Ubuntu 11.04

View 9 Replies View Related

Ubuntu Installation :: Get Canon Printer Working Wirelessly?

Apr 13, 2011

after looking around for hours, i finally gave up and decided to write this post. I need to know exactly what to do to get my canon mx860 printer connected to ubuntu wireless. ive tried nearly everything, but nothing really makes sense and it just doesn't work.

View 1 Replies View Related

Ubuntu :: Canon Mp470 Printer - 10.10 - Able To Print Black And White But Unable To Print Photos

Dec 26, 2010

My wife has a canon MP470 printer and running ubuntu 10.10. I am able to print black and white, but unable to print photos. I got it to work using another driver, but not the 'correct' one for this printer. I have searched a bit and don't see anything about ubuntu 10.10, just older versions. Or should I just network her to my printer....?

View 5 Replies View Related

Fedora Hardware :: Print To A Printer That Is Connected To A Router Wirelessly?

Jul 17, 2011

Linux and I have trying to get my Fedora 15 (x86 64bit) on my laptop to print to an Epson Stylus NX515 printer/scanner. I have the printer connected to a router through a wireless connection. I have other computers that are on the network that are Windows based and they of course are printing/Scanning just fine. The printer is located in a different room. I have been searching for a solution but non that explains how to install a printer driver for one that is connected to a router wirelessly.

View 1 Replies View Related

Debian Configuration :: Can't Print From A CANON LBP6020 Printer

Aug 4, 2015

I have the printer Canon i-SENSYS LBP6020. I followed the instructions from the site URL....There are no errors, but when I try to print, nothing comes out of the printer.My system is: Debian GNU/Linux 8 (jessie)Here is some debugging information:

Error log while printing from a CANON LBP6020: URL....
Troubleshooting information while printing from CANON LBP6020: URL....

View 3 Replies View Related

Fedora Hardware :: Canon S100 Printer Doesn't Print

Sep 6, 2010

F13 showing that Canon s100 printer is founded, installed drivers and everything seems to be OK. But when i try to print text, testpage of what ever, nothing happened. Installed system-config-printer 1.2.4-1.f13, same udev and libs. Cups 1:1.4.4.5.f13, libraries, php modules Here is the Error msg:

[code]...

View 14 Replies View Related

OpenSUSE Hardware :: Canon MF4150 Printer Does Not Print Anything After One Printing?

Oct 23, 2010

I have Canon MF4150 printer. I have downloaded Linux Printer Driver (UFR II) Ver.2.10E from canon asia site. Adding the printer and printing work fine, except that after one printing, the printer stops working. There is no error message./var/log/cups/access_log shows

Code:
localhost - - [23/Oct/2010:19:53:55 -0500] "POST /printers/Canon-MF4100-Series HTTP/1.1" 200 45240 Print-Job successful-ok

[code]...

View 1 Replies View Related

Ubuntu :: Canon Pixma Ip90v Bluetooth Printer Cant Print?

Mar 10, 2011

I am looking for a good new ALL IN ONE printer that will be compatible with Ubuntu right out of the box (scanner and everything).

I am also looking for a portable bluetooth printer that will be compatible. I currently have a Canon pixma ip90v bluetooth printer but I cant get it to print AT ALL and Ive tryed everything.

I am currently running 3 computers with Ubuntu 10.10 and one with 11.04 Alpha 3.

View 4 Replies View Related

Ubuntu Networking :: Wireless Router To Print Wirelessly?

Jun 13, 2010

If i have a printer with wifi support and laptop with wifi capabilities, do i still need a wireless router?

View 3 Replies View Related

Fedora :: Networking F11 With Windows XP (Canon Printer)

Aug 25, 2009

I am a new convert to Fedora with very little knowledge of Linux in general. I have managed to install Fedora 11 on my Advent 8315 laptop and I have wireless connection via my Belkin Wireless N modem router. I have always been able to setup Windows networking successfully but Fedora is much more complex, using terminology that I am not familiar with. What I need to do to achieve networking with my Windows computer? I especially want to network to my Canon printer which is connected to the Windows PC.

View 6 Replies View Related

OpenSUSE Hardware :: Unable To Connect To Printer Wirelessly - Error Idle "Connecting To Printer"

Jun 23, 2011

I am unable to connect to my printer wirelessly. I get this: Idle - "Connecting to printer..." The computer never connects. I can print a configuration report and get the ip address. If I type that in a webrowser, I get an error: unable to connect. Even if I plug the printer into the computer by a usb, I am unable to access the printer's ip address in the webrowser. I'm not sure how to proceed on getting the printer working wirelessly. It is a hp 6940 I use the HP Deskjet 6940 Series hpijs, 3.10.2rc1.9 driver. I have only recently been having printer problems. The printer has been hooked up on the same network for years. It still prints via usb.

View 5 Replies View Related

Ubuntu Networking :: Unable To Connect Wirelsess To Printer(Canon MP640)?

Jul 2, 2010

Wireless issue with printer.Can't connect wirelsess to printer(Canon MP640).Running Ubuntu 10.4 in 64 bit mode.I am able to connect with my small home network and INTERNET is running OK.When I try to add a printer,I just do not know enough.Also,cannot find suitable driver.

View 3 Replies View Related

Ubuntu Networking :: Install A Canon PIXMA MG5250 Wireless Wifi Printer?

Dec 30, 2010

I have a Canon PIXMA MG5250 stand alone wifi printer thats connected to all my windows computers and laptops. Now I want to install a computer with Ubuntu 10.10 and connect this printer also wireless by wifi.

View 9 Replies View Related

Networking :: Print To Printer From The Machine?

Jan 20, 2010

I have 2 computers, a linux and winXP , connected in a SAMBA network.

the winXP machine has a printer, and the drivers for that printer does not exist for linux.

so, how can i print to that printer from the linux machine??

samba allows me to do it in some GENERIC way? at leat in TEXT ONLY MODE??

View 3 Replies View Related

Networking :: Print With Use Of Different User On Network Printer

Mar 25, 2010

The company I work for decided to use printers on which one should log in with there MS Windows password. After logging in, one could print there documents. This is ok for the MS windows office PC's, but not for the Linux based systems.The Linux user accounts have a different name than the MS Windows accounts.Because of this, it is not possible to print with that Linux user account. I can create a Linux user account with the same username as the MS Windows account, so that all users can use that account if they want to print something on the network printers. They can use it like:$ ssh <username equal to Windows>@<hostname> "oowriter <path>/<file>"

Now they can print a file from oowriter to the network printer.So my question is, is it possible to use the account name that is equal to the MS windows account name by default?

example
MS Windows account name = milk
Linux account name = schuurs
Linux account "milk" is created for printing by all users.

user works with account "schuurs" and prints with user "milk" automatically without the use of the ssh string mentioned before.

View 2 Replies View Related

Networking :: Vista Printer Will Not Print From Network

Sep 8, 2009

I'm using Slackware64 13.0 on a laptop. I've set up the network printer which lives on a Windows Vista machine (not my choice) in the family room. I am able to send print jobs to the printer. That part works fine, but the printer does not print. It simply stacks up print jobs with "error - printing" in the status of the first print job.I think I understand what's happening. I'm sending the print jobs to the print server as "Guest" and I have no guest account activated on the vista machine. I'm sitting here racking my brain (ie googling my goddamn fingers into stumps) trying to figure out how to send the jobs to the print server as indubitableness.

For the goddamn life of me I can't figure out what I need to do to send these print jobs as a specific user. I've tried adding "valid users = indubitableness" to smb.conf and I've tried using the -U flag when running lpadmin to add the printer to my system in the first place.The configuration wizard for windows doesn't appear to have any options to enable guest access or to add a specific remote location and/or user to the allow list.I'm at a loss and I'm losing my goddamn mind.

View 3 Replies View Related

Ubuntu Networking :: Cannot Print From Other Computers To Local Printer

Dec 30, 2010

In Ubuntu 10.10, I have my printer, an Epson D120, shared. I can print from the computer itself, but other computers cannot print to it. Both Ubuntu and Windows machines have the printer successfully installed. They can access it, I can access CUPS from all these machines and the the job queue even reports the jobs sent from these computers. But the page count is unknown and nothing is printed, although it says the job is completed.

I'm quite desperate to get this to work. It would suck if I need to go back to Windows just because some minor thing goes wrong. I really don't understand why local prints are OK, but prints from the network are not working.

View 2 Replies View Related

Ubuntu Networking :: 11.04 Can't Print To Printer On WinXP Share?

May 28, 2011

xxxxxx:/etc/samba$ uname -aLinux xxxxxx 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 i686 i686 i386 GNU/LinuxI have a printer shared off of Windows XP. I have always been able to print to this from Ubuntu by adding a network printer through the "Windows Printer via Samba" gui.Now, in Natty, I can set up the printer no problem but all jobs fail. In the printer properties gui I can see this text briefly: "Processing - unable to connect to cifs host".The errors in /var/log/cups/error_log are:

E [28/May/2011:14:32:31 -0700] [Job 15] Tree connect failed (NT_STATUS_BAD_NETWORK_NAME)
E [28/May/2011:14:32:31 -0700] [Job 15] Tree connect failed (NT_STATUS_BAD_NETWORK_NAME)
E [28/May/2011:14:32:31 -0700] [Job 15] Tree connect failed (NT_STATUS_BAD_NETWORK_NAME)

[code]....

View 6 Replies View Related

Networking :: Can't Print From Clients To Printer On Samba Server

Jul 22, 2009

I am having FC11 with an HP prineter attached my firewall is disabled I trying to print from my laptops after I have setup samba and shared the printer , It was working fine when I was installing FC4 and FC5 I am not sure what is missing when I tried to print from the XP box I got "Test pge failed to print" error what I have really noticed in the xp and vista box is that when I go to the printer settings inside control panel , pressing the ports tab and checking to what port I am printing I see that the port "\samba-serverprinter" is not created there this is the log

[code]...

View 1 Replies View Related

Networking :: Can't Print From Windows 7 - Samba Printer Share

Aug 30, 2010

I'm giving up in ever hoping that I'll get printing working with windows 7 with the strange comments I've found on the net. Basically I have a samsung ML2240 printer shared on the network, everything can print to it fine except for my windows 7 laptop. It's shared via Samba.

Quote:

Once you have extracted the driver files, copy the 32-bit drivers to the /usr/share/cups/drivers directory and the 64-bit drivers to the /usr/share/cups/drivers/x64 directory exactly as named below:

[Windows 2000 and higher]
ps5ui.dll
pscript.hlp
pscript.ntf
pscript5.dll

However after checking this, I dont have the files named within int he correct folder on my windows system :

%WINDIR%SYSTEM32SPOOLDRIVERSX643 folder for 64-bit drivers.I've tried installing the printer via the windows installer, however this adds the driver then tells me its not working and fails to print. I really dont know where to turn with this one. I've tried installing the samsung supplied drivers from the website. However they still fail to connect.

View 4 Replies View Related

Fedora Networking :: Net Worked HP Printer Will Not Print-broken Pipe

Apr 10, 2009

my net worked HP printer will not print-broken pipe - this started after I had to switch off the printer at the mains in order to attend to a paper jam. Now it will not print apart from a test page. I am using Fedora 10 and the device info is "hp:/net/Officejet_Pro_L7500?ip=192.168.0.4"

View 5 Replies View Related

Ubuntu Networking :: Wireless Printer Installed But Wont Print?

Jun 20, 2010

I'm using Ubuntu 10.04 on a laptop in a wireless system at home. It's all working fine. I can browse the internet without any difficulties. The problem is that I cannot print to my HP Laserjet 1022nw. The IP for the printer is 192.168.2.2 and I can reach it (and print) from my windows machine. But, if I use the laptop it cannot reach the server at 192.168.2.2 and all print jobs freeze. It's odd because I used the Ubuntu network printer install AppSocket/HP JetDirect connection and it found the printer at socket://192.168.2.2:9100 and installed the correct Foomatic driver. But now the browser cannot get to 192.168.2.2 and it wont print. What am I missing?

View 5 Replies View Related

Ubuntu Networking :: Can't Send Print Jobs To Network Printer

Jul 18, 2011

I have a Brother MFC-295CN network printer. Been having a heck of a time trying to get this thing working since I installed Ubuntu 11.04 yesterday. I've been away from Linux for some time and am new at using it. Downloaded and installed using the Software Center:

mfc295cnlpr-1.1.2.i386-1.deb
mfc295cncupswrapper-1.1.2-2.i386.deb
brscan3-0.2.11-4.i386.deb
brscan-skey-0.2.1-3.i386.deb

Was able to send a test print and it came out fine. But when I tried to send a print job - nothing. And, the scanner won't work either.

My computer is a Gateway GT5464. It's dual booted with Windows 7.

View 1 Replies View Related

Ubuntu Networking :: Cups Client-error-not-possible When Attempting To Print Or Add Printer

Jun 17, 2010

I noticed that a bit after I had updated Ubuntu 10.04 through the Update Manager, I couldn't print at all! (I run ubuntu 10.04 on my laptop and have a networked HP Officejet 6110xi all-in-one printer connected to a comp running Windows XP home on the same LAN). Everything works when I boot up in windows vista, so the problem is definitely in Ubuntu.

First, I checked the printer jobs and it said that there was an error with a filter or something. Restarting the job didn't do squat, so I decided to try reinstalling my printer, but get the same CUPS error "error-client-not-possible" right after I click "Apply". I then Googled the issue but didn't find much of anything, so I thought I'd try reinstalling CUPS. No luck there either... Same error again and again.

View 3 Replies View Related

Debian :: Canon Printer - Lp0 - "Printer Not Connected -- Check Your Connection"

Jul 31, 2011

I have a canon printer which was working so far. After my latest upgrade its giving errors saying "Printer not connected -- Check your connection" Fortunately I had a backup of my root before the upgrade and one difference I see is that on the new system theres no /dev/usb/lp0 which there is on the old one. So how do I make it? Or should I use the /dev/lp0? Note they are different:

[Code].....

So (naturally) when I tried to make a softlink from /dev/usb/lp0 to /dev/lp0 it did not work.

View 10 Replies View Related

Ubuntu :: Can't Print With Canon MX860

Jun 6, 2010

I cannot print with my Canon MX860. I have downloaded the proper drivers from the Canon Europe website and forced the arch to x64 as described on many sites. When I try to print a test page I get the error that "Idle - /usr/lib/cups/filter/pstocanonij failed". I have checked in lib64 and pstocanonij was there as well. If I change the URI from USB to CNIJUSB then I get the error that "cnijusb has failed". It may be possible to get this working as in another forum someone claims to be successful. I am able to use the scanner with the sane-backends package, so that is not a problem.

View 6 Replies View Related

General :: Can't Print To Canon I550

Jan 24, 2010

OS: Kubuntu 9.10
Printer: Canon i550

I have tried selecting many of the drivers located on localhost:631 and none of them work. i550 is not in the list of drivers. When I select i560 it will print if it is only one line after that it seems to get confused and doesn't print. Sites that I have looked at [URL]...

View 14 Replies View Related

Ubuntu :: Cant Even Get Canon Ip6301D To Print

Aug 15, 2010

it is shown as my default printer, and even spits out a sheet when I try to print something. The 'Test Page' actually includes some ink and lines but does not look like the real thing.

View 5 Replies View Related

CentOS 5 :: Canon Mf 4018 Could Not Print In 5.5?

Jan 2, 2011

My canon mf 4018 could not print in Centos 5.5 What I did before: I chose Administration/printing and there I tried to add new printer. Unfortunately, I could not find my model of the printer in that list. I used also official canon site to find a driver for Centos 5.5.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved