Networking :: Wireless Network Is Recognized But Fail To Connect?
Sep 22, 2010
I'm using ubuntu 10.4The hardware is a usb adapter with ew-7718unThe network is recognized, but never succeeded to connect. all the network setting are equal to a laptop which connect using on-board card (same linux distribution). the adapter performed well on windows. The problem persist with two different computers both with ubuntu 10.4
I upgraded to 10.04 from 9.10. I had no problem connecting to my wireless network with 9.10, but can't with 10.04. The network shows up as available, but it won't connect when I enter the security informationBelow are the details and the information I've seen requested from others with a similar problem.I'm at my wits end.Dell Inspiron 8200 Laptop with TrueMobile 1150 wireless card.
I have an Atheros ar5007eg wireless card, and I haven't had problems with this card in GNOME. However, when I made the switch to KDE recently, I can't connect to any wireless networks. A wired connection works fine (that's how I'm writing this), but when I try to connect to any wireless network, it hangs at Acquiring IP Address, then asks me for my WEP key again, I enter it, and the process starts over. I tried using WICD, but I'm not sure if I set it up properly.
my wireless home network is not recognized by my network card (RealTek RTL8190 mini PCI). The post was as follows: "I am using a new computer with Windows 7 , Athlon quad core 2.60 64 bit, 8GB RAM. Internet conection works fine with ethernet but ubuntu does not see my wireless network. card (RealTek RTL 8190 ID: 10ec:8190). Have searched this forum but unable to come up with a fix. I was looking for windows XP drivers to use Ndiswrapper but could not find a list of .inf files. My network is OK and works perfectly in windows and with my 2 laptops. Can anyone point me in the right direction? Additional info: install was done within Windows using WUBI to a separate partition on my HDD. I am new to this and thouroughly confused as to the procedure for installing the drivers if they are in fact available."
I am very frustrated in that I would like to use Ubuntu 10.04 but it is useless without internet connectability. I am new to linux and do not understand where to get the appropriate drivers or how to install them. I wish someone would answer this post and either give me a clue what to do or just say "give up" and uninstall ubunutu.
The problem with my wireless network. I have Dell DV6 Pavilion 2115 eg laptop and i installed Ubuntu 11.4 and internet and wireless worked, until i reboted my system it has disapear. I cant no longer to connect to a wireless network. It dont shows me any wireless network. My wireless card is Atheros AR 9285 802.11b/g/n Wifi Adapter
I am having a little trouble connecting to my wireless network. Running Fedora 10 32 bit.I'm trying to connect to a hidden wireless network. I updated the firmware for my driver but apparantly the driver is still not working. Broadcom has a driver from their website for Linux 32 bit systems. Should I attempt to install it? I read a post where the driver is built into the system kernel. If so I would need to blacklist the one of the drivers. Correct?
[justin@justin ~]$ iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wmaster0 Interface doesn't support scanning. code....
I picked up a cheap PC the other day for �20 and it came with a Belkin N Wireless USB adapter. I know the adapter works because Windows XP was originally installed and I could connect with no problems. I wasn't able to connect when I installed Kubuntu so I thought I'd see if I could have any more luck with Fedora....so far, not so good! I realise that this is a fairly common problem, especially for this USB adapter, but I've tried dozens of threads here and elsewhere and still can't get Fedora online.I can see the wireless networks in the list, but if I try and connect then I just repeatedly get asked to enter the authentication details, which I know I'm providing correctly.
I have upgraded to Fedora 15 but cannot get wireless up and running. When i switch on wireless and choose the connection it tries for 15 seconds before prompting me for the password and continues like this. When i check the device in my network config it shows as being inactive. Ralink device 3060
On my laptop HP presario, I installed Ubuntu 9.10 (Wubi). My Windows Vista connection works fine, but the Ubuntu cannot find my wireless network. My network card is the Belkin Wireless N (F5D8233-4v3). Do I have to use the ndis. On my desktop here, (wired) Ubuntu found my card without me having to do anything. What should I do. (unistall ubuntu and make do with Vista?)
I have installed the driver for my usb network adapterIt sees my adapter fineI see my two routers .....i have both a dsl routher and a router conntected to my cable modem ...it says signal strength of 90I see my neighbors network as well but when i try to connect to either of my routhersit will not let mei use WEB ... 128 bit..it asks for the passpharseit says it is activating....and the after a few minutes the same window back up againi know my pass phrase is correctwhen i reboot in windows ...everything works fine ...no problembut in 10.04 i can not connect to any networkwhat am i doing wrongI re entered my pass phrase a 100 times
I upgraded from Ubuntu 9.10 to 10.04 this morning, and I can't connect to my wireless network. The Network Manager shows it's there, with the correct SSID and security key and everything, yet it still won't connect. I'm using a D-Link DI-524 Wireless Router that I've never had any problem with before.
I'm having a little issue here with my laptop. I've installed Ubuntu 10.10 Maverick/Meerckat on my Lenovo Thinkpad T61p about 3 hours ago and it can't seem to connect to the wireless network... I've had the same problem when I moved from Windows to Ubuntu on my desktop but I've been able to fix it completely. The thing is I can't remember how I fixed it :S So, I updated my system, downloaded the additional drivers. Also, I cna connect to the ethernet network. To fix my desktop, I used some command lines that someone posted in a thread about the wireless keeping disconnecting... I just can't find that post though :S What I remember about the post was that there was someone who had posted a thing with like a parabolic thing around he wireless adapter (LOL)
Earlier in the week, I installed 10.10, but had awful problems trying to get the wireless networking working. Upgraded to 11.04, and wireless is sort of working. However, I am unable to connect to my wireless network. It sees the network, but just keeps asking me for the password. I enter this (I have checked that it is correct), but it just prompts again, after a little while. Networking through network cable works fine.
Wireless network is set up to use WPA-PSK + WPA2-PSK. I have checked, and I do have wpa_supplicant loaded.
I upgraded to Ubuntu 11.04 from 10.10 a couple of days ago and now I cannot connect to my wireless network. I can see all the networks and I managed to connect to something called BTopenzone, just to see if I could connect to anything, and that worked. I also run windows 7 on the same computer and setup and it connects fine to my wireless network. Before I installed the Ubuntu upgrade I could connect without any problems. I've had a look at the settings for the connection in Ubuntu but I don't understand them.
My router is a dlink dir-655 My receiver is a edimax ew-7711uan wireless usb adapter
Hey I just installed linux on my computer and it will not connect to any wireless networks, it will detect them and say try to connect but for some reason wont. It does connect just fine to a wired network.
I have Dell DV6 Pavilion 2115 eg laptop and i installed Ubuntu 11.4 and internet and wireless worked, until i reboted my system it has disapear. I cant no longer to connect to a wireless network. It dont shows me any wireless network.My wireless card is Atheros AR 9285 802.11b/g/n Wifi Adapter.
I've just finished doing the basic install of Ubuntu 10.04. I have the SSID, password, etc.set up for my wireless network. The network icon will show the PC is connected to the network but I can't connect to the internet. I'm using a Zoom 4411 Wireless-N USB adapter which works fine under Windows. I DL'd the driver files (rt2780) from Ralink using the Windows partition but they need to be compiled(the topic for another query.)Since I can't connect, I can't get Buildessential or Checkinstall.
I have a Dell Inspiron 8600 laptop on which I recently installed Ubuntu 9.10. Most things work, but the wireless will not connect to my home wireless network (a Linksys WRT54G). (Cannot see any other WIFI antennas from here, so I don't know if it works on other networks). Ubuntu says I have an Intel PRO/Wireless 2200BG, Kernel Driver ipw2200.
When I try to look for a wireless network, Ubuntu doesn't see any. (Every other computer in the house does, Macs and PCs). I tried Connect to Hidden Wireless Network > New > and filled in the name and the WEP password that the Linksys gave me.When I select Connect to Hidden Wireless Network and select the network that I entered all the information for, the Connect button is always grayed out.
I cannot connect to my wireless network. i have a Dell mini 9 with ubuntu. i lost my internet service for a couple of days. it was back on today but when i went to connect to the internet the screen on my computer reads "OFFLINE MODE" Web Browser is in offline mode and cnnot connect to the internet. How do i fix?
I just installed Ubuntu 9.10 64 bit on my HP Touchsmart TX2 1020us which has a Broadcom 4322 chip. At first my computer didn't seem to see the card at all, but then I typed the command (sudo apt-get install bcmwl-kernel-source) and then restarted the computer and now I'm connected to the network, but cannot connect to the internet so how do I figure this out. Like I said I have very little experience with linux at all so please don't make your answers too complicated.
This is baffling me but I am easily baffled/baffeld? I carefully followed these instructions to install a a working driver http://ubuntuforums.org/showthread.php?t=760568. It all went fine, my wireless light came on and it detected my wireless network. I know my WPA2 code (I can connect on the same computer in windows 7) and my keyring code. but I still can't connect it whirs away for quite a while before giving up and saying not connected.[Code]....