Networking :: TCP And UDP Socket On Same Port ?

Nov 20, 2009

Can we open TCP and UDP socket on same port number?

View 1 Replies


ADVERTISEMENT

Networking :: MULTICAST Address And Port - Socket Listen Only On Port?

Feb 12, 2009

I make an application on GNU/Linux which listening on a MULTICAST stream, so I open my unconnected socket, bind it on a MULTICAST address and a port, join the multicast group with the "setsockopt (IP_ADD_MEMBERSHIP)", then I receive datagram on my socket.

Now I've two different instances of the same application that run with their own MULTICAST address and port. And what I found strange is that, after a misconfiguration, I switch the ports, for example:

Emitting on 225.0.0.1/23451 and 225.0.0.2/23452
Receiving on 225.0.0.1/23452 and 225.0.0.2/23451

And my receiving part doesn't care about the MULTICAST address, it looks like the socket is listening on the port number only! I mean that the receiver [225.0.0.1/23452] take its datagrams from emitter [225.0.0.2/23452] and vice-versa!

View 2 Replies View Related

Networking :: Raw SCTP Socket Cannot Bind With Port?

Jul 26, 2010

If I open a raw SCTP socket, am I able to bind to a specific port? (I only want to see SCTP packets from a particular IP address AND port.) Or, any raw SCTP socket, regardless of port binding , will get all SCTP packets received by the OS from that IP address? The port doesn't matter and is ignored.

View 1 Replies View Related

Networking :: Socket Programming - Connect To Port Y On IP X With Telnet

Sep 16, 2010

I have a customer who is complaining that they can connect to prt y on IP x with telnet. They are seeing the following:

telnet x.x.x.x y
Trying x.x.x.x...
Connected to x.x.x.x.
Escape character is '^]'.

after some time the connection of course times out. Connection closed by foreign host. There is no telnet service running on this port so they cannot do anything, but they are complaining tht the fact that telnet "connects" is a security risk. I am having difficulty explaining why they are able to connect with telnet. I know it has to do with the socket layer API in Linux but I am having difficulty explaining this sufficiently. I also can't just say "this is the way linux works" to them. I am looking through "UNIX Network Programming" by W.

View 3 Replies View Related

Networking :: Fedora 11 Gnome Application Can't Connect To Socket Port 8005

Jul 3, 2009

I have an x application I am trying to run under gnome. It assumes a fixed ip address and exclusive use of the eth0. I have run it under gnome on RHEL 5.3. I set the ip address and ifconfig confirms the correct address. When I run it I get "SocketConnect() error:

Resource temporarily unavailabele, port 8005. (on the terminal that I started it)

This is indicative that it has failed to make a connection to the outside world. One difference I notice between the non-working and the working is that, the error message seems to stop coming out on the fedora gnome, almost immediately, whereas on the other installations it will come out indefinitely until it connects. is virb0 interferring. What is different in the networking on fedora 11 then RHEL?

View 2 Replies View Related

Networking :: Using A Perl Script To Test For A Socket Listening On A UDP Port On A Remote Host?

Mar 10, 2011

is it possible using a perl script to test for a socket listening on a UDP port on a remote host ?I work in an environment where netcat is not allowed and from time to time I need to see if a UDP port is open on a remote host.

View 6 Replies View Related

Networking :: Configuring Socket Timer To Release Socket Once The Connection Is Terminated?

Jun 4, 2010

I want to configure socket timer to release socket(port) once the connection is terminated. Do we have something in Linux OS to configure this delay to release socket?.

Any command, link or man-page anything will be helpful.

I browsed a lot but unable to find it.

View 1 Replies View Related

Networking :: /usr/sbin/in.telnetd: Getpeername: Socket Operation On Non-socket?

May 5, 2009

I had installed Fedora 10

Below is the output of uname -a

Linux 2.6.27.5-117.fc10.i686.PAE #1 SMP Tue Nov 18 12:08:10 EST 2008 i686 i686 i386 GNU/Linux

I need to enable telnet service on it, then found xinetd and telnet-server not installed,

Then I had installed below
First I had installed Xinetd: xinetd-2.3.14-21.fc10.i386.rpm
then I had installed telnet-server: xinetd-2.3.14-21.fc10.i386.rpm

After installation I executed below commands

Service xinetd start
Chkconfig xinetd on
Chkconfig telnet on
Service iptables stop
Chkconfig iptables off
Iptables �F

After I had tried telnet localhost ----IT FAILED

when I run telnet server manually by issuing the below command
/usr/sbin/in.telnetd, I get below error
[COLOR="Red"]/usr/sbin/in.telnetd: getpeername: Socket operation on non-socket[/COLOR]

I have other system running same OS, I had followed the same steps discussed above to enable telnet, It works fine on it.

View 1 Replies View Related

Programming :: Tcp Client Socket : Get Own Port Number?

Oct 1, 2010

I am working with simple tcp client to establish connection to sockaddr_in servAddress and send data segment:

...
connect(sockfd,&servAddr,sizeof(servAddr)) < 0)
send(sockfd, pkt, pktLen, 0);
close(sockfd);
...

Elementary... Here's the tricky part: next i have to handle user level ack the server is sending to "client"... To do that i have to open server socket on the same port number the system assigned to my client socket before. How can i get it ( in user level code)?

View 2 Replies View Related

Programming :: Raw UDP Socket And ICMP Destination (Port) Unreachable?

Oct 26, 2009

I'm using a single raw socket to read UDP packets from local test network with 1024 ports. Each UDP src and dest port is unique and I need access to IP and UDP header fields. I can stream and process data (in and out) at 100 mbps in linux-rt kernel with very low jitter < 250 usec, 10 usec nominal.

I'd like to prevent kernel from issuing ICMP port unreachable errors back to the sending host, however, I don't want to create 1024 vanilla UDP sockets and bind to each one because of resource constraints. Currently, I'm using iptables to drop the outbound port unreachable messages. Does anyone know of a way (programmatic using C code) to prevent the ICMP unreachable traffic? Perhaps an IOCTL or socket option? I also tried changing /proc/sys/net/ipv4/icmp_ratelimit but that seemed to have no effect. By default the ratemask is set for dest unreachables and a variety of ratelimit values did not change any behavior that I could see.

View 5 Replies View Related

Ubuntu :: Failed To Create UDP Socket (SIP) On Port 5060 Address

Mar 13, 2010

I can't seem to get on my Twinkle SIP Phone, it says: "Failed to create a UDP Socket (SIP) on port 5060 Address already in use" after that message it brings me back to the window were I'm supposed to run my profile, how do I fix this?

View 6 Replies View Related

Programming :: Bind A PF_PACKET Socket To A Specific Port Number?

Sep 26, 2010

I am trying to create a socket to listen for a bootp response so I am using a PF_PACKET socket so that I get the response based on my mac. My problem is that I don't want to hear all traffic (as I do now) so would like to use a specific port number and bind to it.

View 1 Replies View Related

Programming :: Bind The Listening Socket To A Paricular Ip Address And Port?

Jun 26, 2011

I am learning network prgramming in linux in c,and try to build a server and in this server I want to bind the listening socket to a paricular Ip address and port.Bind function is showing error,I did not want to use wild card. Here is the code.

#include<stdio.h>
#include<sys/socket.h>
#include<strings.h>
#include<netinet/in.h>
#include<arpa/inet.h>
#include<string.h>

[Code]...

View 2 Replies View Related

Networking :: Multiple FTP Upload Socket Error "Connection Reset By Peer: Socket Write"

Jan 31, 2010

I am pragmatically trying to upload a list of files from my client machine to a proFTPd server I have running on Ubuntu. Every time I get several (around fifty) files into the transfer, I get the following error: Quote: Connection reset by peer: socket write error

I am able to remotely upload 25,000 small files of ~ 1K in size, but when I go to upload hundreds of 2-4 Mb files, I get a socket write error. Am I using up all available sockets before they can be released? If so, how do I release the sockets? If not, what does this error mean and why am I getting it?

View 1 Replies View Related

Debian Configuration :: Cannot Open Java Socket - Port (9955) Closed

Feb 26, 2010

I have a java application that I wrote recently. It runs off port 9955. The application runs great on my mac server. When I installed it on my linux box i cant get to it from outside the box. A port scan shows the port as closed. I flushed my iptables, did not help. I can telnet into the app locally, from the server and it works great. I cannot telnet from outside the server. I have a reference to the application in /etc/services as a tcp port (which it is).

netstat shows it as listening
netstat --listen
tcp6 0 0 [::]: SimpleSocketTest [::]:* LISTEN
netstat -anp | grep 9955
tcp6 0 0 ::: 9955 :::* LISTEN 1484/java

View 4 Replies View Related

Fedora Networking :: Port Redirect, I.e. Whatever Comes Through Whatever Interface On Port AAAA Will Get Redirected To Port BBBB?

Feb 18, 2010

I want to do a simple port redirect, i.e. whatever comes trough whatever interface on port AAAA will get redirected to port BBBBI thought that iptables -t nat -I PREROUTING --source 0/0 --destination 0/0 -p tcp --dport AAAA -j REDIRECT --to-ports BBBBhowever it doesn't work, e.g. nc -v -w2 -z localhost AAAA gives:

nc: connect to localhost port AAAA (tcp) failed: Connection refused
while
nc -v -w2 -z localhost BBBB

[code]....

View 10 Replies View Related

Programming :: Socket Programming Using Php - Swap A Client Ip And Port?

Mar 28, 2011

Is it possible to swap a client ip and port ? This is what I am trying to do. Let say you have Comp1 and Comp2 And you have Server between them. My goal is to get Comp1 and Comp2 know each others IP So Comp1 connects to server And server stores comp1's IP In a text file or other place And Comp2 connect to server And server also stores his info And then both comp1 and comp2 dowload the tex file And use the info on it.

View 9 Replies View Related

Server :: Socket Connections / Socket And TCP Connection For Connecting To An External System?

Dec 7, 2010

Anyone knows the difference between a socket and TCP connection for connecting to an external system?

View 1 Replies View Related

General :: Socket Programming - Feed Some Words One By One To The Socket

Jul 6, 2010

i'm writing a simple program of client socket program. Here below is the code sample which i'm writing...

Code:
//tcp_client.c
#include <stdio.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <netdb.h>
#include<string.h>
#include<stdlib.h>
[Code].....

the above code works fine.if we copmile and run ./a.exe 192.xx.xx.xxx 1111 and press enter it works fine..everytime it asks "Please enter the message: " and if give that will be displayed in server. but my problem is i dont want to print everytime "Please enter the message: " i just want to feed some words one by one to the socket.

View 4 Replies View Related

Programming :: Setsockopt : Socket Operation On Non-socket Getting Error?

Mar 30, 2009

im getting that error in my code for some reason. I compiled my code, and when i try to run this server it throws me an error on my call to setsocketopt(). The only way it can reach that part of my loop is if it succeeds when it calls sock() so I dont understand why the error says its an operation on a non-socket. Im just trying to set up a server to pass messages from a client to it a viceversa. Here is the code:

Code:
int main()
{
int socket_fd, new_socket_fd, k;
struct addrinfo hints, *server_info, *p;
struct sockaddr_storage peer_address;
code....

View 7 Replies View Related

General :: Socket Error / Socket 31: 0x36?

Sep 15, 2009

We are seeing recv err on socket 31: 0x36. What could be meaning of the error?.

View 1 Replies View Related

Ubuntu Networking :: Error - Remote Port Forwarding Failed For Listen Port 5500

Aug 7, 2010

When I use the following command:

ssh user@ssh_server -L 5500:localhost:5500 -p 22

everything works fine. I can log in, and local port forwarding is done. Otherwise when I use the command:

ssh user@ssh_server -R 5500:localhost:5500 -p 22

I get an error "remote port forwarding failed for listen port 5500". However when I try remote port forwarding in WinXP by use of putty there is no problem...

View 2 Replies View Related

Networking :: Use Iptables In Order To Forward All The Incoming Packets For Port 5555 To Port 5556?

Apr 4, 2011

I'm trying to use iptables in order to forward all the incoming packets for port 5555 to port 5556 on the same server (192.168.2.101).

I wrote the following commands:

iptables -A PREROUTING -t nat -i any -p tcp --dport 5555 -j DNAT --to 192.168.2.101:5556
iptables -A FORWARD -p tcp -m state --state NEW -d 192.168.2.101 --dport 5556 -j ACCEPT

View 3 Replies View Related

Networking :: Iptables Can't Port Forward (PAT Port Address Translation)?

Feb 20, 2010

I'm using a Debian servers, as router/firwall.. I've two ethernet interfaces into the server, one for wan and one for lan. The i use SNAT so my LAN clients can access the internet throgh the debian router. That is working... Now i want to be able to access servers on the LAN site from the WAN site, and i wanna use port address translation (PAT). I have a FTP server running on a lan server, so i'm trying to portward port 21.

iptables -t nat -A PREROUTING -p tcp -i eth1 -d (WANIP) --dport 21 -j DNAT --to 192.168.1.2:21

When people try to access my FTP from the WAN site, they are redirected to the local FTP server, and they are promted for crendentials, but when the credentials are typed, and the local ftp server should answer the wan request, the connections dies.

The wan clients are being promted for credentials, so they are redirected to the local lan server, but after that the connections dies, so i think there is some kind of nat problem, when the local lan server is trying to respond to the wan request..

Here i my iptables script:

#flush table
iptables -F
#input regler

[code]....

View 6 Replies View Related

Ubuntu Networking :: Port Forwarding Through A Specific Port?

Jul 14, 2011

I want to set my ip as static and port forward it through a specific port can anyone help me with this im using ubuntu 10 with 64 bit OS

View 1 Replies View Related

Networking :: Directing Packet From One Port To Another Port Of Another Machine

Apr 25, 2009

How can i redirect data received on a port to another port located in a different machine? Can i do this using IPTABLES ?

View 4 Replies View Related

Networking :: Iptables - Port Forwarding To Blocked Port?

Mar 25, 2010

I have a mail server on which I would like to block port 25 on my eth0 for everyone except our external spam filter. the problem is that I want our users to be able to connect via port 10025 which is forwarded to port 25, which then is blocked...

View 2 Replies View Related

Networking :: Setup Port Forwarding Of Port 1000 To Ip 192.168.1.200?

Oct 24, 2010

I had to add them to my firewall script when I installed openvpn on my dd-wrt router:

iptables -I FORWARD -i br0 -o tun0 -j ACCEPT
iptables -I FORWARD -i tun0 -o br0 -j ACCEPT
iptables -I INPUT -i tun0 -j REJECT
iptables -t nat -A POSTROUTING -o tun0 -j MASQUERADE

what should I add/change to set up port forwarding of port 1000 to ip 192.168.1.200. also how to get the answer sent by 192.168.1.200 follow the same route used by the data received through port forwarding.

View 1 Replies View Related

Networking :: Ethernet Port Connection With An E1/T1 Port

Aug 30, 2010

i have an embbeded hardware that uses bootp for booting from a Network Managemnt Host (NMH)on the same ethernet. The embedded hardware has both kind of ports i.e ethernet as well as E1/T1. I would like ask, what do i require to establish a communication-link between the embedded hardware and the NMH throuh E1/T1 ports of embedded hardware, so as to make it boot through from E1/T1. Further, NMH possesses only ethernet port. Just to refine my questions i'd like to know what additions do i need to do on my NMH , like may be i have to put an E1/T1 port or is it possible that the E1/T1 port can be directly connected to an ethernet port on the other host.

pardon me if i am not making absolute sense here as my knowledge is limited on Layer 1 and layer 2.

View 3 Replies View Related

Networking :: Access A Port And Run Script On That Port?

Aug 23, 2010

how to access networking port and run scripts on that port so as to gain access of remote machine.is that possible through command prompt or through software.

i kno ip address of my frnd who is chattin with me .okay.i want to run an application on his computer .i came to kno tht we can run script o through port

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved