Networking :: Intel 6050 Adapter - No Wireless Extensions

Jul 19, 2011

I have an Asus U52F laptop with the Intel 6050 network adapter.
Code:
# lspci | grep WiFi
02:00.0 Network controller: Intel Corporation WiMAX/WiFi Link 6050 Series (rev 5f)

I've downloaded the Intel firmware and dropped it into the correct location according to the README.
Code:
# ls -l /lib/firmware | grep iwl
-rw-r--r-- 1 root root 469780 Jul 10 13:18 iwlwifi-6050-5.ucode

I am using the current module from compat-wireless. When I modprobe iwlagn, I get no error message, and the module shows up in lsmod.
Code:
# lsmod | grep iwlagn
iwlagn 158054 0
mac80211 179615 1 iwlagn
cfg80211 139799 2 iwlagn, mac80211

However, no wireless devices show as being attached to my system!
Code:
# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.

I also see errors in dmesg.
Code:
# dmesg | tail
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
iwlagn: Copyright(c) 2003-2011 Intel Corporation
iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:02:00.0: setting latency timer to 64
pci_resource_len = 0x00002000
pci_resource_base = ffffc90016384000
HW Revision ID = 0x5F
pci_enable_msi failed
iwlagn 0000:02:00.0: PCI INT A disabled
iwlagn: probe of 0000:02:00.0 failed with error -1

Distro: CRUX (64-bit contrib)
Code:
# uname -r
2.6.38.2

View 3 Replies


ADVERTISEMENT

Ubuntu Networking :: Intel WiMAX/WiFi Link 6050 Wireless Card Not Working?

Dec 14, 2010

I'm dual booting windows 7 64 bit and Ubuntu 10.1 64 bit on my Dell Inspiron 11z with an embedded WiMAX/WiFi Link 6050 series wireless card made from Intel. I only use it for wifi, not 3g or wimax. I installed the latest driver from intellinuxwireless.org, iwlwifi-6050-ucode-41.28.5.1, but it still doesn't seem to work. I ran these terminal commands from another thread:

cd Desktop/wlwifi-6050-ucode-9.201.4.1
sudo cp iwlwifi-6050-4.ucode /lib/firmware
sudo chmod 644 /lib/firmware/iwlwifi*

[code]....

After running "sudo rmmod -f iwlagn sudo modprobe iwlagn", I get this read out for my wireless card.

*-network DISABLED
description: Wireless interface
product: WiMAX/WiFi Link 6050 Series
vendor: Intel Corporation

[code]....

In the ubuntu help section it tells me to flip a manual wifi switch to enable it, but pressing my windows wifi button, F2, doesn't appear to do anything while in ubuntu. The only experience I have working with linux is typing some terminal commands on my android phone to root it.

View 9 Replies View Related

Slackware :: Wireless Internet Not Working - Intel Corporation WiMAX/WiFi Link 6050 Series

Mar 26, 2011

I've reinstalled Slackware 4 times today because of things I've messed up along my way, after upgrading the linux kernel I've had issues with getting back to desktop, so I'm on a clean slate right now with the exception of installing wicd. I need help since wireless is not working.. My wireless worked fine out of the box with Ubuntu,I don't understand why it is not working now... Using Slackware 13.1, Kernel 2.6.33.4

Code:

bash-4.1# ifconfig wlan0 up
SIOCSIFFLAGS: No such file or directory

[code]....

View 13 Replies View Related

Ubuntu Networking :: Wireless - Lost It - 'wmaster0 No Wireless Extensions', But Then Refers To Wlan0 As The Wireless Connection

Mar 28, 2010

A friend who switched ISP's gave me his old Linksys WRT54-G wireless router. I went through the installation procedure and had a wireless connection up and running - smiley face. I had security set up for WPA, and decided to upgrade it to WPA2. Another smiley face. When I went to connect (had already done so successfully), I noticed it referred to my wireless as Linksys - I was expecting to see the SSID. So I started playing around in Network Manager and now I have things all effed up.

Don't know exactly what I did, but now I have no wireless. So I ran a few commands (lshw -C network, iwconfig, ifconfig, and iwlist scan), and looking at the results I see what appear to be inconsistencies in the output. I've posted them below, and make the following observations:

1. Under the lshw it refers to my wireless connection logical name as wmaster0, and has the correct MAC address, etc.

2. Under the iwconfig it says, 'wmaster0 no wireless extensions', but then refers to wlan0 as the wireless connection (although it does not seem to be running).

3. Under ifconfig I see both a wlan0 and a wlan0:avahi. The wlan0 has no IP, the wlan0:avahi does, but it is incorrect.

[Code]...

View 7 Replies View Related

General :: Slackware Internet Connection W/ Intel 6050 Link Wifi/wimax Card

Feb 20, 2011

I'm a Linux newbie. Used to use Ubuntu, but I switched to Slackware because I want to learn how Linux works better.

On my Samsung qx410 laptop, I can't connect to the internet. I went to the System Settings -> Network Settings and all the tabs there, but it wouldn't detect any connection, wireless nor wired.

I noticed that the kernel of Slackware 13.1 is out of date, so I tried compiling a newer one, but I couldn't get that to work.

I tried downloading this file: iwlwifi-6050-ucode-41.28.5.1.tgz but even after reading the readme, I had no clue how to go about installing it or even whether it was the right thing to install in the first place.

How can I get my internet working?

View 6 Replies View Related

Ubuntu Networking :: No Internet - LAN Or No Wireless Extensions

Mar 24, 2010

I have a fresh install of Karmic on a older compaq laptop. I initially had LAN access, but not wifi. I added a few Broadcom packages using synaptic, and then neither worked. Then I removed the same packages, but I still have no internet access, LAN or wifi. Here are some of my settings. vincentertainment@vincentertainment-laptop:~$ iwconfig

[Code]...

View 1 Replies View Related

Ubuntu Networking :: Intel Wireless Cards Compatible With Non-intel-based Laptops?

Feb 22, 2010

Are Intel wireless cards compatible with non-intel-based laptops? In my case I wish to upgrade the current Atheros-based mini pci express wifi card with the Intel 4965agn. It is an Asus 4520 with an AMD Athlon X2 processor and nvidia nForce chipset.

View 1 Replies View Related

Ubuntu Networking :: Wifi Configuration / Error No Wireless Extensions?

Jan 3, 2010

Hello, I have a problem with wireless internet on my laptop - Acer TravelMate 2413LMI with Broadcom BCM 4318 card.

Below are ifconfig, lspci and iwconfig outputs:

ifconfig:

eth0 Link encap:Ethernet HWaddr 00:0a:e4:e6:86:b5
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:20 Base address:0x3000
lo
Link encap:Local Loopback
code....

I forgot to mention that the problem occured after linux 9.10 installation

View 1 Replies View Related

Ubuntu Networking :: Error When Compiling Orinoco-0.15rc4.tar.gz - Wireless Extensions Are Not Enabled

Dec 26, 2010

currently running karmic on an old gateway laptop with kernel 2.6.31-22-generic and, as is par for how I handle challenges, I've jumped in with both feet - which is to say this is not a dual-boot situation. I've spent some time reading the forums (and other sources of information) and am grateful for all the knowledgeable people who are willing to share what they know.

My operating system seems to be functioning properly.I can get online via ethernet, but not via wireless. I have a lucent orinoco gold PC24E-H-FC (PCMCIA) card, which the computer isn't seeing. I am trying to follow the instructions here: [URL] to install the driver. Everything is going well until I get to the sudo make line. At that point I get the following display:

make -C /usr/src/linux-headers-2.6.31-22-generic M=/usr/src/orinoco-0.15rc4 KERNELRELEASE= modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.31-22-generic'
/usr/src/orinoco-0.15rc4/Kbuild:8: *** Wireless extensions are not enabled. Stop.

[code]....

how I can fix it so I can continue on with the instructions. (For the record - if I just continue on, I can change directory in the next line, but I cannot remove either hermes or orinoco as "no such file or directory" seems to exist.)

View 3 Replies View Related

Ubuntu Networking :: Iwconfig/iwlist - No Wireless Extensions And Interface Doesn't Support Scanning?

Mar 11, 2010

The adapter I purchased (Zonet ZEW2508 ) uses the Ralink 2070 chipset - a fact that originally excited me because Ralink seems to be fairly loving to the Linux community. However, despite my best efforts I can't get the thing to work. Initially I tried following directions to set up the driver you can download from the Ralink website. The directions I found were written February first, and Ralink updated the driver February eighth - so as far as I can tell the directions no longer work. After screwing around trying to figure that out for a while I decided to give ndiswrapper a go.

Initially this seemed promising. I just harvested the drivers from the CD and followed one of the many ndiswrapper directions available - most helpful seemed initially to be the Ndiswrapper Troubleshooting Guide found in this forum, however the solutions offered there didn't work either. When I throw an ndiswrapper -l into the terminal it looks promising at first, it tells me the driver is installed and the device is present, but it just doesn't work. When I try iwconfig, or iwlist scan it tells me "no wireless extensions," and "interface doesn't support scanning" respectively. The only devices even listed are lo, eth0, and pan0. There's no wlan0 or anything of the sort.

View 1 Replies View Related

Ubuntu Networking :: Get Wireless Network Adapter To Be Read By 'Windows Wireless Drivers'

Nov 24, 2010

I recently reformatted and dual partitioned to both Windows 7 as well as ubuntu 10.10. Loading works fine and Windows 7 is 100% operational. I cannot seem to get my wireless network adapter to be read by Ubuntus 'Windows Wireless Drivers' gui. Here are the steps that I have done THUS far, to make sure that we are all on the right path. Before I go any further, my wireless network adapter is an old school WUSB11 Linksys Wireless Network Adapter (running version 2.6).

1) Downloaded and installed "ndiswrapper" from ubuntu's main website. I downloaded the common, utils and ndisgtk files and installed them accordingly.
2) I extracted these three files to the desktop of Ubuntu and accessed the terminal page.
3) From terminal I typed "cd Desktop" to change the directory to the desktop.
4) Next, I typed in "Sudo dpkg -i ndiswrapper-common_1.54-2ubuntu1_all.deb
Sudo dpkg -i ndiswrapper-utils-1.9_1.54-2ubuntu1_i386.deb
Sudo dpkg -i ndisgtk_0.8.5-1_i386.deb"
5) This installed Windows Wireless Drivers gui successfully and I can access it.
6) I have downloaded the driver files for the adapter from the cisco website and searched them for the required files needed.
7) After extracting the .INF file from the "Drivers" directory named "NETUSB.SYS" (I wasn't sure if the other associated files within the same folder needed to be present together with NETUSB so I moved everything to the desktop) I typed in "sudo ndiswrapper -i NETUSB.inf". After accessing the Windows Wireless Drivers gui I have noticed that the 'netusb' driver is present yet under it, the system states "Hardware present: No". This leads me to believe that maybe I installed incorrectly or my "fireware?" is not present? I was reading through the installation guide posted on the ubuntu website that in addition to the .INF file we also need the BIN file(s)? and SYS file(s)?.. The folder with the drivers for my adapter contains a BIN file but it is not within the "Drivers" section of the folder.
9) Upon mousing over the network Icon naturally my hardware is still not present.
10) From what I gather after the system finds the hardware I am to write into the terminal

[Code]....

View 2 Replies View Related

Ubuntu Networking :: 'Wireless Is Disabled' Using RealTek RTL8187 Wireless USB Adapter

May 25, 2010

I have just completed installing Ubuntu 10.04 LTS. When I click on teh network manager it shows:

Wired Network
disconnected
Wireless Network (Intel PRO/Wireless 2200BG [Calexico2])
wireless is disabled
Wireless Network (Manufacturer RealTek RTL8187 RTL8187 Wireless)

[Code]....

I want to be able to connect through the RealTek wireless adapted.

View 3 Replies View Related

Ubuntu Networking :: Wireless Unstable In 10.04 - AR5001 Wireless Network Adapter

Aug 30, 2010

I am severe wireless problems with Ubuntu 10.04 on my laptop.(Spec below)

I have just performed the first clean install since new. Installed a new Hard Drive as well. The machine and wifi was fine under Ubuntu 9.04.

It is booting much faster now but the wifi keeps dropping off.

Spec:

Machine - Acer Aspire 4310
Wireless card - *-network
description: Wireless interface
product: AR5001 Wireless Network Adapter
vendor: Atheros Communications Inc.

[Code].....

View 2 Replies View Related

Ubuntu Networking :: Belkin Enhanced Wireless USB Network Adapter - Windows Wireless Drivers App Doesn't Work

Feb 3, 2010

I have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:

[code]...

View 1 Replies View Related

Ubuntu Networking :: No Wireless After Installing Ndiswrapper T61 With Intel 4965AGN Wireless Card

Dec 31, 2010

I have lenovo thinkpad, T61 with Intel 4965AGN wireless card. It is a N card, it works under N mode in windwos, but not in Ubuntu (10.10). I installed ndiswrapper and got the windows xp drivers for this card. the issue is that i got an error when installing the drivers and since then I cannot use wireless.

The error i got is: Code: Module could not be loaded. Error was: FATAL: Could not read '/lib/modules/2.6.35-24-generic/kernel/ubuntu/ndiswrapper/ndiswrapper.ko': No such file or director I unistalled the driver, but now under network connections no wireless connections appear, nothing. I cannot use wirless anymore.

View 9 Replies View Related

CentOS 5 Networking :: Cant Get Wireless Going On Wlan0 Intel Pro Wireless 4965 AG Or AGN?

Oct 8, 2010

trying to connect wireless on wlan0 intel pro wireless 4965 AG or AGN

View 1 Replies View Related

Networking :: Can't Get Wireless To Work With Intel Wireless 5300 AGN

Aug 21, 2010

I can't get my card Intel Wireless 5300 AGN to work. I'm running Slackware 13.1 and it's a full, fresh install.I get to show up with lspci -v:Network controller: Intel Corporation PRO/Wireless 5300 AGN [Shiloh] Network Connection...But it will not show up with 'ifconfig' which will only list the local loopback (yes we have have a eth problem as well but one thing at a time).

View 5 Replies View Related

Ubuntu Networking :: Drivers For Belkin Double N And Wireless Networking USB Adapter?

Aug 3, 2010

Ok, so I am needing some drivers and I've been googling like hell to find em, however, I can never seem to find any. My adapter model is F6D6050v1.

PS: when I try sudo ndisgtk it comes up with command not found.

View 1 Replies View Related

Fedora Networking :: Can't Use Wireless Usb Adapter

Dec 11, 2009

I just installed the driver for my D-link DWA160 adapter, And now I cant seem to get it working.

View 6 Replies View Related

Ubuntu Networking :: Usb Or Pci Wireless Adapter?

Aug 26, 2010

I have installed ubuntu lucid 10.04 release, and i want to install a wireless adapter usb or pci in my desktop. Can somebody recommend me a model that works fine?

View 3 Replies View Related

Ubuntu Networking :: What Wireless Adapter To Get?

Jan 26, 2011

I have tried a couple of wireless adapters (USB dongles) but none of them work all that good on Ubuntu. I keep loosing connexion when on Ubuntu while on Windows (dual boot) there never seems to be any problems, so signal strength is probably not the issue. I bet it's a drivers problem so what I want to know is which adapters work really really good/great/fantastic on Ubuntu? The first option, wext, was chosen when I installed Wicd (running side by side with GNOME Network manager).

View 9 Replies View Related

Ubuntu Networking :: Best USB Wireless Adapter To Use?

Jun 17, 2011

I've got a couple of old PC's running Ubuntu but I want to give them wireless capability and move them to a different room. What is the easiest wireles adapter to use? I'm thinking USB would be easier than opening the boxes to install cards, plus I could buy one adapter and try it with both PC's to make sure it works, then buy a second one once I know it works.

View 1 Replies View Related

Networking :: Turn On Wireless Adapter?

Mar 11, 2010

Iwlist wlan0 power:

wlan0 Current mode:off
iwconfig wlan0 power on: This does not work
ifconfig wlan0 up: does not work

[code]...

View 2 Replies View Related

Networking :: Can't Install Wireless Adapter

Jan 7, 2010

I have Problem with connection Wireless.I can't install wireless adapter.Now i'm installed Backtrack3.How i can Configure wireless adapter.

View 2 Replies View Related

Networking :: Wireless Adapter For Ubuntu .

Jan 13, 2009

As I am struggling to get my Netgear WNP111 to work with ubuntu 8.10 ,can someone recommend an adapter that will work out of the box with ubuntu 8.10 .

View 7 Replies View Related

Fedora Networking :: Wireless USB Adapter Not Connecting: F10

Nov 12, 2009

I have a wireless USB (TP-Link TL-WN620G) adapter on F10( 2.6.27.38-170.2.113.fc10.i686). I have installed the drivers and it is detecting my router. But it keeps asking for network password with repeating a dialogue box although I entered correct password. I have configured the wireless configuration using NetworkManager.

View 6 Replies View Related

Fedora Networking :: D-Link DWA-125 Wireless 150 USB Adapter?

May 29, 2010

I have "D-Link DWA-125 Wireless 150 USB Adapter". I can use this wireless adapter on my laptop, i can use it on my desktop as well but only when windows is running, im a newbie to fedora, today is my 2nd day and 3rd night, so pretty exited about it. i have installed fedora 13 on a different hard-disk on my desktop. when the computer is booting, there is an orange light on the adapter glowing, it turns off when the computer reaches the fedora loading screen. If i see fedora's Network Configuration window under the hardware's tab i see the "D-Link DWA-125 Wireless 150 USB Adapter" listed along with my lan card. Now if i go towards the clock on the top right to get the wireless connection working, it shows wireless network disconnected. I have tried creating wireless connection manually by inserting the SSID, macadress, BSSID, ,WPA passkey etc, but still doesnt works. when i try connecting using hidden wireless connection, i receive window for inserting keyring password again and again, stating that the login password does not match. but during all this time, i still havent seen the orange light glowing activity on the external usb adapter. If i restart the computer in windows the adapter/wireless connection works. also have checked the Network service, it seems that the service is up and running. i really require some assisstance on this,

i have noticed this, that if i go under network configuration. the first tab over there, inside devices i cant see my D-Link adapter, but if i switch onto the hardware tab it shows my lan card as well as my D-Link adapter. so does it means that the driver is missing? or any service which is disabled, however at this point of time i can get only using wired connection. please assist me. with this issue, im also downloading the 500 complete update as well for fedora, hoping that it may make it work.

View 14 Replies View Related

Ubuntu Networking :: Sitecom WL-345 Wireless USB Adapter

Jan 1, 2010

I am trying to get the above wireless adapter o work with Ubuntu. I have installed ndiswrapper but I am unsure what windows driver I need that will work with it.

When I type lsusb I get the following: Bus 001 Device 002: ID 0df6:0042 Sitecom Europe B.V.

I tried searching the ndiswraper site but all I could find was Sitecom WL-344 300N X2 Wireless USB Adapter that pointed me to Driver: rt2870.inf and rt2870.sys (on Windows XP).

I am not sure if this will work or where to download these files, so I was wondering if anyone else has this adapter that could shed some light onto how to get it working.

Edit: I just tried the rt2870 driver and it didnt work

View 1 Replies View Related

Ubuntu Networking :: Select Which Wireless Adapter To Use ?

Jan 17, 2010

My netbook have an internal wireless receiver, but from my room it doesn't work well, so I bought a TP Link TL-WN422G hoping it receives better. Ubuntu sees it but I don't know how to force using it.. I attach lsusb with peripheral in bold:

View 3 Replies View Related

Ubuntu Networking :: 10.04: Does Not Recognize Wireless Usb Adapter

Mar 29, 2010

Ubuntu 10.04 does not recognize my wireless usb adapter at all. Its a linksys WUSB100 ver.2.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved