I recently installed F10 x86_64 on my Lenovo T61 laptop, and while I'm quite pleased with F10, I am having a difficult time with my wireless card. I spent most of yesterday searching for a solution, but none have presented themselves. Scenario: I am trying to connect to a HIDDEN SSID with NO ENCRYPTION (work Wifi, don't ask) using network-manager and its associated applet.
Symptoms: I left-click on NetworkManager, select "Connect to Hidden Wireless Network", enter my information, NetworkManager does a few things, and finally I'm told that NetworkManager cannot connect to my network.
wlan0 IEEE 802.11abg ESSIDff/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thrff Fragment thrff Power Managementff right iwlist wlan0 scan gives this... wlan0 Failed to read scan data : Network is down
I've tried removing and modprobing iwl3945 but no luck.
I clicked "Network Settings", and I found that the ip address was wrong, which is "192.168.1.10/24", and netmask field is empty, so I modifed the configuration file located in /etc/sysconfig/network, named ifcfg-wlan0, added one line(NETMASK= '255.255.255.0'), saved it and reboot the system. After rebooting the system, I still found the ip address is wrong and netmask field is empty, so I have to use ifup command to activate my card manually every time the system starts.
I have a problem with my Intel PRO/Wireless LAN 3945ABG, The laptop doesn't have a hardware "turn-on" button for Wireless device, normal "windows shortcut" aren't also working. I couldn't turn it on using Network Configuration, it keeps giving me this message:
Error for wireless request "Set Mode" (8B06) : SET failed on device wlan1 ; Invalid argument. RTNETLINK answers: No such device Determining IP information for wlan1... failed.
I have some serious trouble getting the Wireless connection working, using Fedora 13 on a Dell XPS M1710 laptop which has an Intel Pro Wireless 3945 ABG adapter. I have previously tried an earlier version of Fedora I think it was version 10, where it worked flawlessly out of the box, but all versions since then, simply wont work properly. I got the Fedora 12 64 bit working at some stage, after using hours and hours trying to get it working, and suddenly it did. Don't know what suddenly made it work, since I haven't made any new changes, just re-checked the old ones. But I needed to use Skype which is only in 32 bit, so I had to reinstall to a 32 bit version, and then couldn't get it working again.
I can get it to work with any Windows version, no problems. I have also tried with PCBSD version 7.x, 8.0 and today I tried the new 8.1 just to see if that worked to, an no problemos, it works perfectly out of the box, I could set it up in 5 minutes, even though I don't have any previous knowledge of PCBSD, other than a few short trial installs.
It has to be said that I am a newbee to any Unix/Linux, so I don't know how to troubleshoot properly, and have only tried a few things which I have picked up from other forums. But unfortunately nothing seems to work. The first thing I did after a clean install was I looked in the Fedora 13 documentation, that says I should check that the NetworkManager is controling the interface, I tried to start up NetworkManager but nothing happens, no reaction what so ever. I tried rebooting and then restarting NetworkManager, but no matter what I try, I won't work, not even if I am using the root account.
I noticed right after the install, that there was a choice of connecting to a hidden network in the lower right corner of the screen, but while I have been trying to get the NetworkManager to work, it has suddenly disappeared (I have disabled SSID broadcast on my Linksys router. I've tried to run lsmod and it seems like the right firmware is running, I think it was called IWL3945 or something like that. I think there were around 3 such modules running, plus a Dell module.
Another important note, before I even touched the the WIFI, I connected to the Internet via my normal fixed LAN connection, and installed all the updates that were available and rebooted the system. I am using an LinkSys WAG354G V2 ADSL router, where I have disabled SSID broadcast. Is there a kind soul out there, who has a good idea of what the problem is, or a good idea of how to troubleshoot it ? since a laptop without a WIFI connection is not of much use to me.
I have an IBM Thinkpad T60, running Ubuntu 10.04 (Lucid) with a dual boot of Windows XP. I am having trouble getting it to connect to my home wireless network, which uses WEP. It connected fine at my university when I first installed Lucid, but has not connected at home. I can see the network in the panel applet, with a good signal strength, but when I try to connect it repeatedly asks me for my key and never actually connects. I had this problem shortly before I installed Lucid, though it was working for a long time previously. I'm not sure what update caused it to stop working because I was at my university at the time, and it works fine there even now, so I didn't realize it right away.
I doubt this is a hardware issue because I can connect to the same network when I boot into Windows. I have seen posts about similar problems on the forums, but couldn't find any solutions that helped me.
Below is the information the wireless help guide said to post. Machine Brand and Model: IBM Thinkpad T60
I installed Maverick earlier today on a Dell XPS M1210, and everything works beautifully, except for one thing: the wireless card. It is an Intel 3945ABG wireless card, and I've tried searching around and have found nothing,
I've always wanted to learn this branch of computing, and I do think it's rather interesting. So, I was following in unison both this and this, which so far just tell me to download ipwraw-ng and extract it, but when I cd into the folder, and say make, I get this:
Code: ibo@ibo-laptop:~$ cd Desktop/ipwraw-ng/ ibo@ibo-laptop:~/Desktop/ipwraw-ng$ make WARNING: $SHELL not set to bash.
I've just installed F12 64bit on my notebook. Everything works great. Only problem I'm having at the mo is my WLAN is slow at DNS resolution. On wired it works fine. I know it's not my access point as it is part if my router and I've rebooted it a few times. My other wireless notebook (Windows 7, Intel 3945ABG) doesn't have the same issue, and this notebook didn't when on Windows 7. I'm using OpenDNS as my forwarders.When I open a URL in Firefox (3.5.5) it opens the site immediately on wired. On wireless it will sit for 3-4 seconds before opening the site saying looking up .................. Once on the site browsing behaves normally.Anyone else having similar issues?
I have my laptop dual booted between Ubuntu 9.10 and Windows 7. In Ubuntu I randomly lose connection to the wireless network. It always works fine when I first boot into Ubuntu but after a while my wireless connection will go down. The signal strength meter will go to zero bars and the black popup message will appear that my wireless connection has disconnected. At first, if I just wait a bit, the connection will come back. However, after about 4 or 5 times of doing this it will then ask me for my password, and inputting the password does not reconnect me to the AP. I am finally forced to reboot. Then it works OK for a while again and the cycle repeats.
It works fine in Windows7 all day, every day. I have the Release Candidate of Windows7 so it's going to expire soon. I would really prefer to make Ubuntu my everyday OS on this laptop rather than pay for a Windows7 license but I cannot tolerate a flaky wireless connection.
I had 8.1 on this laptop at one point and I never had any problems with the wireless then, that I can remember. I had no Ubuntu for a while but then I came back with the 9.1 and was loving it until the wireless problem reared it's ugly head.
Wireless found by lspci: 03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
I'm new to linux. I've just installed Ubuntu 11.04. It has all been going ok, but the wireless just stopped working all of a sudden. The indicator light turned off and when I tried to turn it back on (Fn+F2) nothing happens. Sometimes, when I restart the computer, the wireless might work; but if the signal is lost the LED on my laptop turns off and I cannot reconnect. Also, in these strange cases that the wireless works when I restart I can manually turn it off (Fn+F2), but nothing happens when I try to switch it back on.
In the menu on the upper right corner I see 'Enable Networking' is checked, but 'Enable Wireless' cannot be modified.
I have a Dell Inspiron 6400 and the wireless device is an Intel Pro/Wireless 3945ABG. I have tried to follow some of the threads on this forum on similar cases, but the ones that were comprehensible to me did not work (or I actually might not have understood them either). code...
What do you think? Wife just bought a new Compaq 610 series laptop. These are the wireless specs:
Code: 10:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02) 30:00.0 Ethernet controller: Marvell Technology Group Ltd. Unknown device 4357 (rev 10) Strange thing is when I ping the router, I get this, pings one time then dies: Code: anna@katie:~$ ping 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data.
I'm new to linux and I install ubuntu on my wifes laptop since it will hopefully slow down the amount of problems I have to resolve.I ran the live cd of ubuntu and wireless was working all ok, showed my wife around and she was like ok install it.I used the GUI and install ubuntu, and updated (apt-get update) after that the wireless is not working.I see the device, but have no idea whats wrong. Please could someone inform me as to which things to post in order to get it sorted. Since this seems to be the only issue.
I am unable to get my intel pro/wireless 3945abg connected to my router. The firmware has been installed and at first was even able to connect, but now the access point doesn't even show up in network manager. I am currently able to connect using a USB wireless adapter, but for certain reasons, would prefer to use the former. I've looked over this page with no results.
It's also because I've never had any big problem. The last openSUSE I used without problems was/is 11.2(I still use it as main desktop because of problems since 11.3).The problem is - the DL speed is repeatedly drops down to around 156KB/s albeit my top speed of router-NIC combination is at 21-22MB/s. When this happen and open network manager and click/reload my wifi or restart wireless or even computer, the speed is back at the top. But after few seconds, minutes it drops down again, and so on. I made some images(to see it on the network manager draphs):after that drop-off:and restart wireless:Best chance to see it is when downloading more files with FreeRapidDownloader or JDownloader. Upload speed is OK. The first time I've seen this problem in 11.3, which i've skipped in hope that 11.4 will be ok and now, as the EOL of 11.2 is coming I'd like to go on.It's also desktop and installation media independent(Gnome works similar, DVD, LiveCD).I've checked many other distributions and none of them had this problem. But openSUSE is my love, so i need and want to solve it
I am running Lucid Lynx and have only noticed this problem in the past couple weeks. Before Lucid I ran Jaunty & Karmic on this same box, although I installed Lucid as a clean install. My problem is that up to 5 or 6 times per minute my networking card drops its connection and then has its connection re-established. I have an integrated Intel 82566DC gigabit card on an Intel Motherboard DG35EC connected to a 10/100 network and am running the 64-bit version of Lucid. I've done some considerable searching on this problem and although I've seen many references to similar problems dating back several years, I have found none that seem to have any solutions that do anything for me. I never had this problem under any prior version of Linux on this box (all prior versions were also 64-bit).
In short, this block of messages repeats in my messages log:
May 18 20:18:50 mark-desktop kernel: [10121.062129] e1000e: eth0 NIC Link is Down May 18 20:18:52 mark-desktop kernel: [10122.730873] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX May 18 20:18:52 mark-desktop kernel: [10122.730876] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
Most of the time I don't even see that the connection has gone down. Sonetimes everything seems to be operating fine for a half-hour or more, although it could be dropping out and coming back really quickly all of the time. Sometimes it goes out for 10 seconds.Sometimes it goes out for many minutes and I can get networking back by killing disabling networking and then re-enabling it. It's quite annoying.
I'm sorry if I'm duplicating an existing issue on this forum, but I can't find this exact problem anywhere. Does anyone have any clever ideas about how to fix this?
I recently swapped out my old network switch (10/100) for a Netgear GS105 gigabit switch. With the exception of my Fedora 10 laptop all the rest successfully connect at gigabit speeds. But my laptop (with an Intel Corporation 82566MM Gigabit Network Connection (rev 03)) will only connect at 100Mbps. If I look in the logs for my network card here is what I get:
I have a Dell Vostro 200 with the above wireless card in it and I cant get it to work. I have been on Intel's website and downloaded e1000-8.0.18 and installed as the instructions. But it is still greyed out on the Network Manager. I have just installed Ubuntu Desktop the latest current version.
I have an old Toshiba Satellite A30 Notepad. I've installed Ubuntu 10.04 onto it and everything but WiFi works. I've installed wicd and several other network tools but just can't get Ubuntu to let me use the WiFi connection (the option is greyed out).I know the card works because the last OS (Windows XP) used it without any problems. The card is detected, the drivers are installed and the hardware (slider) switch is set to on.I think the issue is related to the Radio Frequency Kill Switch being on but I don't know how to turn it off.The output from various commands are:
I just upgraded to natty last night, and everything is working fine except for the network manager. I can enable and configure the wireless card via bash, but the network manager widget will not manage the wireless card.
When I first boot up, the "Enable wireless" check box is greyed out. After I enable the card via the terminal, the "Enable wireless" check box becomes ungreyed, but every time I click it, it instantly unchecks itself. I feel like Currly from the Three Stoogies. Check, uncheck, Check, uncheck.. "Slaps face repeatedly."
This is a fresh install of Ubuntu 10.04 on a Dell XPS M1530. I'm getting very frequent disconnects to my wireless network, despite good signal. I have wicd and nm-applet running side by side, wicd doesn't work by itself and nm-applet won't get a new IP after reassociating with the AP.
Wireless connection is steady in Windows 7, so I'm guessing it's a problem with the driver.
I have a new Thinkpad t510 laptop with an intel centrino wireless N card (no bluetooth). I installed ubuntu a couple weeks ago after I got another hard drive in the expansion bay. I have the drive partitioned into two sections, 250gb for file storage, and 250gb for the linux OS. Currently no other OS is installed on the other harddrive.
I have had everything perfect for the past couple weeks, but once i installed some updates today, my wireless fails to work now. Just some general info that you might ask me, lspci | grep Network, returns
00:19.0 Ethernet controller: Intel Corporation 82577LM Gigabit Network Connection (rev 06) 03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 Furthermore, on the top right of my screen, my wireless is grey'd out and says no network devices available on hover.
Im trying to connect to my college wireless network. I have looked a thinkwiki and no one has posted any bugs. Any ideas on getting it working again?
If I execute "iwlist wlan0 scanning", I see the cell I'm interested in:
I'm able to connect to this cell using Gnome "Wireless Networks" manager, but not with iwconfig. At first I tried to connect to this "bq" network while wlan0 was active("ifconfig wlan0 up") using the iwconfig but this didn't change any of the wlan0 parameters.
Then I tried to shutdown wlan0("ifconfig wlan0 down") and executed:
Now the changes applied and "iwconfig wlan0" gives following:
Everything seems to be correct, but I'm still "Not-Associated". I have tried with "iwconfig wlan0 essid bq", "iwconfig wlan0 ap 00:24:14:F9:0B:92", "iwconfig wlan0 essid "bq" mode Managed" etc, but whatever I try, it does not connect. I even did "/etc/init.d/gdm stop" in order to be sure, that Gnome "Wireless Networks" is not interfering with "iwconfig", but this gave no results as well. I can associate with this AP using the Gnome "Wireless Networks" just fine, but for some reason I can't connect using iwconfig.
I have installed Fedora 14 on Intel's DH67BL mother board, which has a on board LAN port, Fedora 14 does not detect on-board LAN. Unfortunately, intel does not provide any driver support for linux OS :-(. However, if I install an additional LAN card, Fedora 14 detects it and everything works fine.