Server details: OS: Linux RedHat DHCP: Static IP set to 192.168.1.101 sshd_config: Enabled for port 22 for ssh Connected through wire to the Linksys router
Router: Type: Linksys BEFW11S4 Port forwarding enabled for port 22 to IP 192.168.1.101
Client: Windows 7 Interface: PuTTy Host: 192.168.1.101 on port 22 through SSH
This always gives an error "connection timed out". SSH directly on the local Linux works fine.. Seems basic but had been struggling over this for past 3 hours to no avail so thought of posting it to the experts.
I have been using the B version for many years, just got the G version for a B-day gift. I run OpenSuSE 11.3 and XP on one computer but I have several (3) wireless laptops in my house plus a xbox wireless. I also have 2 other ethernet computers connected to the B version. Can someone provide me with some links/info on how-to. When I did a Google search all I came up with is firmware upgrade...which I've done for the B version. Is it as easy as taking out the old...configuring the new?
I set up my linksys router for PPPoE and username, however, if the compter goes idle after a while, I have to go back into the configuration page, save settings and everything is ok. I would like to keep the connection alive 24/7. There are two settings: time to live (max idle time) redial Max idle time is now set at 10 minutes. The redial is grayed out. Are these the settings I should be concerned about?
I am dual booting XP and Ubuntu 10.10 64bit on a Dell Latitude E6410 and I have a Linksys WRT120N router connected to my Modem.
So the weird thing is, under XP I can use the internet while connected to my router. Under Ubuntu I can't use the internet while connected to my router. But I can use the internet in Ubuntu if I connect to my neighbor's router called "linksys". So something happens when I connect to my router that makes Ubuntu not able to access the internet. But if I'm connected to my Neighbors router or if I use XP while connected to my router I can use the internet.
I have been using Ubuntu for about a year, so I'm getting better but still a noob. I've tried to figure out what's going on by looking at other forums and posts and trying to see if anyone has solved this. So far I've had no luck. This is also the first of many problem I have encountered that I have been unable to solve using online posts, and is the first problem that I have had to resorted to creating a post to try and fix.
I have been happily running the (always latest) version of PolarCloud's Tomato software on my LinkSys WRT54G for about 2 years now. I am looking for a way to setup a Proxy Server on my Tomato-based router to use from a remote machine somewhere in the web cloud.The reason for wanting to set this up follows. I normally run Squid on a Ubuntu 8.04 box, which I use while I am away from my LAN at home to browse the net (I like to keep things between me and my ISP, as much as possible . I rely on my proxy server on a daily basis. The way it works is I SSH into my Ubuntu box, and forward squid ports. I then point my browser to the proxy on my box. For various reason, however, I would like to set it up so that I can also do this via my router. So, I would like to be able to ssh to my router (I can already do this), forward the proxy ports, and surf the nets happily via my router at home. I am happy to use existing solutions (if possible), such as privoxy or squid, and am also open to setting up a custom-based solution, as may be necessary.
I am running Fedora 13 and I have a linksys WRT54G wireless router [1,2]. I'm having a strange problem. I'm using a computer connected to the router via a wired connection. At intermittent moments the connection seems to stop. I can't even ping the router (192.168.1.1). However, if I make NetworkManager reconnect to eth0 the connection immediately comes back and I can ping the router and navigate to websites. If I wait a random amount of time the connection also seems to comes back on its own (without reconnecting via NetworkManager). Any idea if this is a hardware (router) problem or a software problem? This didn't happen a month ago.
P.S: I have already updated to the latest firmware (Ver.8.00.8).[URL]..
Okay, a few days ago I got a small job setting up a router for a neighbour of mine. He wanted me to set up a wireless network for him. The router he bought is a Linksys Wireless N-Router E1000. I set it up the passwords and everything. Only to find out that I couldn't connect at all to it. The main computer with a direct ethernet connection to the router was the only one that had internet. Everytime I attempt to connect wirelessly with any device, it will take extremely long time to connect, to the point where I will just quit connecting.(Example: 15 minutes of waiting, when the laptop is right next to the router)
Any ideas about what I am doing wrong here? As far as I can think of it might just be a faulty router, because the router will not implement any changes(like setting a password) I set on it. Only wired connections seem to work. the router is called a linksys wirless N-router E1000.
I have an Acer Aspire 1 Netbook - this is running UBUNTU- When I try to connect to my Linksys Router in wireless mode it asks for password - but doesnt accept. I can see the Linksys in network manager plus several other networks in the vicinity. My other wireless devices all connect O.K. to the Linksys, and accept my password.. I can hard wire by ethernet to the netbook. Just wireless is the problem
i installed ubuntu 10.04 from internet.but i cant connect to my wireless router linksys wrh54g ver 1.0,but if i using Local area connection its working,however my wireless connection working in my other os win xp.
I have a Linksys WAG54G2 Router - this is set up and was working fine with Xp and my Apple I phone.I have just changed over from XP to Ubuntu, and am having difficulty in configuring wireless settings to accept UBUNTU.The hard wired Ethernet connection works fine.
I have a linksys router in my basement and physical access is pretty much blocked by a stuck trap-door. I could try to shut off the main power switch, but I like to see that as a last resort. The problem I have is that I have an open (no encryption) wifi connection between my pc and linksys router, yet I cannot connect to it. Until a couple of days ago I could connect to it with my android handheld device, my linux laptop, and my windows desktop. All these devices are now unable to connect. I attached the wicd log from my linux laptop. How to gain access to my router again?
After I installed a gigabit router, I could not access my nfs server anymore; I tried with the previous physical set-up and all was OK so clearly it is the new router that is the disturbing factor. After some (and then some) experimenting, it would appear that the following specific feature needs to be enabled: Filter Internet NAT Redirection This feature uses port forwarding to block access to local servers from local networked computers. Select this feature to filter Internet NAT redirection. It is not selected by default.
The reason I had simply looked over it is that I did not see how internet nat redirection could be related to the local network. As I read the details, it became clear that it really is but it also raised new questions. Have I now allowed just anyone on the internet to access to my nfs server? Because the description is not very clear either as it mentions both internet and local network. And what is that odd terminology? Filtering allows access, not filtering does not - that seems like the world upside down ...
I have an intranet server behind a NAT router. Very standard linksys router home setup. The server has a static IP. I used port forwarding in the router to use SSH and log into the server remotely - it works OK.
I want no one outside my home network to access any webpages on the server unless they're authenticated.. I know I could port forward like with ssh but with http port 80 and then see webpages , but again this would open it up to anyone with my cable modem's IP - wouldn't it?
I need a secure way like SSH that requires a password before anyone could access port 80 and http from the server from a remote network.
How do I do this? And on the local network people can get served pages normally as usual. Just remote would need authentication. Must be commonly done(?)
Well this one is driving me nuts. I've been searching through the forums for a while and it seems that a number of folks have similar issues but the solutions used don't look like they apply to me. so without further ado here are the outputs typically requested:lspci
Code: 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
I am thinking of moving the router behind a server and connecting the server directly to the internet via a modem. Are there any security issues related to doing this? or other things I should be aware of. Iptables are implemented on the server blocking access on unused ports.
I moved my server and network equipment, and now the wireless works but I cannot get my server online. I host a website, so this is kind of urgent.
I have a wireless router and can access the internet fine on my laptop. My server is wired & connected to the router. It sets up the networking properly.. ifconfig has an ip address, the default gateway is present. But I cannot ping google, or even the router. It says destination host unreachable.
So I go back to the laptop to check the router settings.. sometimes it likes to assign the server the wrong internal ip. But, I can't access the router settings either! The page (192.168.1.1) times out. Same with trying to ping the router. How can the laptop be online if it can't reach the router?
Oddly, ifconfig on my laptop reports an ip address starting with 99.233. It's always given me an internal address starting with 192.168. What's going on here? Is the router not allocating an internal ip? I use wicd to connect, if it's relevant.
We have a windows laptop that can only get a "local connection". Now it does sound like the router is forwarding directly to my laptop, instead of allocating internal ips.
On this Ubuntu 8.04.4 LTS server, I want to log the messages from a Linksys router. So I made this change to "/etc/init.d/sysklogd" SYSLOGD="-r" Then in "/etc/syslog.conf" I added the following to the top of the file: Code: if $fromhost isequal 'Linksys' then /var/log/Linksys.log & ~
Then I rebooted the server. But there is no "/var/log/Linksys.log" file.
I have just installed fedora 14 and would like to setup my linksys wag54g router in order for me to connect to the internet. I'm the newest newbie ti linux been spoiled rotten by the ease of installing stuff on win7. I need a step by step how to please as I am completely new to the command line as well. I have uploade the quick install guide for the router, but at this stage I dont know wether I should go ahead with what the install guide says or not as I dont know what works for linux.
i use slackware 13.1 i have apache, mysq, php - working i have a router netgear WPN824v2 - latest firmware port forwarding to my comp 192.168.1.105 port 22 i can access my ssh from my internel lan, but i cannot access it from the outside... i used [URL] to test the port and it says that is closed. i used PFportCheck Program on my other windows computer and it says that "port 22 is opened on another device!" - which is good because it's opened on this computer. also tried to changed the port on sshd_config to 6655 and 22 but it's still cannot connect...
Okey I have a good start i know there is something I'm missing. After Following this great help tutorial.[URL]..And kinda guestimating and messing around with my Linksys creating a new router assigning a static ip "Lan and wireless" address. configuration for the router looks like this.
I think I might be messing up the interface config file at the "NETWORK" section but i don't know.
I have an HP PSC2110 that is connected to a Linksys WPSM54G wireless print server. Printing works great, no issues what so ever. I am wondering if anyone has been able to configure the scanner to work that way as well. If I connect the PSC2210 to my laptop via USB, XSane sees the scanner and works perfectly. I am trying to figure out if there is a way for XSane to see the scanner through the Linksys PS?
Karmic 9.1 64 bit Toshiba Satellite L455 Linksys WPSM54G ver 1.1 HP PSC2110