Hardware :: Unable To Mount NTFS External Hard Drive
Jun 21, 2011
I'm having problems mounting my NTFS external hard drive .
1.padlock: VIA PadLock Hash Engine not detected.
2.PPP MPPE Compression module registered
3.PPP BSD Compression module registered
4.PPP Deflate Compression module registered
5.npviewer.bin: segfault at ff99cd48 ip ff99cd48 sp bfc8afac error 4
6.usb 4-2: new high speed USB device using ehci_hcd and address 5
my external HDD of 750GB bring me an error during mounting!it asks me to get to windows and reboot twice or cmd chkdsk/f of which when i do it only option comes is to format it, i do not wanna format it coz it's with a lot of ma useful data!am using debian just asking if its possible to retrieve ma data from it using commands persay and what are those
I am trying to mount an external USB hard drive. I'm using Debian Lenny 5. I tried to right-click on the hard drive and then select the mount command inside the gnome desktop environment but it gives me an error. Is there an easy way to mount and unmount this hard drive? The hard drive itself is formatted from the factory in NTFS. I'm going to leave it in this file format is a need to use it with Windows machines as well.
Just installed opensuse 11.3 Kdeversion on my laptop. Before installing it on live mode i had a problem of accessing my other drives (NTFS, FAT32 and EXT4) which said HAL system policy...etc mounting error. I could access all drives with root privilege. I thought problem will be solver once i install opensuse on my system. How ever i was really disappointed after seeing the same problem post install. Googled around for the solution and got this link
After this the problem got worse now i am not able to see any of the drives in the side panel. Gone through many forum and posts all discuss about external USB HDD.
I wanted to make a clone of my drive, so I tried the ole sudo dd if=/dev/sda1 of=/dev/sdg1 trick, but first I formatted the drive to the Ext4 format. I wish I would have understood that format a little more before I decided to format it that way. Now I can't access my drive at all. I read almost everything on the net about manually mounting it, but almost everything was in Fat, NTFS, or Ext3/2 format. I even read the Ubuntu documentation. I don't know if it's because my drive is in Ext4 format, or if I'm just not doing something right.
As you can see in the following picture, it recognizes the drive, yet I am unable to mount it. I am trying to access the 160 GB drive. I even tried to see if Windows would recognize it. No go. Today while lurking in the Ubuntu Forums I found a way to make a live .iso of my system (which I think is awesome). So now I want to reformat my drive and use it as storage once again. I think I will restore it to NTFS. I thought that the Ext4 format would work better in Linux (which I was wrong), but now I need Windows to recognize it as well, and it needs to be able to store files bigger than 4 GB (unless you have a suggestion on what to format it as).
I'm trying to get an external HD to mount on my Dell Laptop running OpenSuse 11.1. When I connect I get the following:
usb 1-5: new high speed USB device using ehci_hcd and address 4 usb 1-5: configuration #1 chosen from 1 choice scsi3 : SCSI emulation for USB Mass Storage devices usb 1-5: New USB device found, idVendor=0bc2, idProduct=0503 usb 1-5: New USB device strings: Mfr=54, Product=69, SerialNumber=95
But am left scratching my head. I don't think its showing up in the etc/mtab - which i think it is supposed to?
I purchased a Seagate Goflex 500GB external hard drive yesterday and tried to connect it with my Fedora machine. Unfortunately my machine could not mount the drive. I have never had such problems earlier with other USB drives.PLease, how to use this ext disk on the fedora machine.
I have WD external 1TB USB 3.0 drive that I want to attach to a RHEL 5 computer. I don't want to format it to a FAT32 as I'm copyong over about 530GB of data. What is the easy to get the RHEL OS to recognize this drive? NTFS is not loaded on this system as I already checked.
I've been searching for a way to do this with no luck. I've got a 1TB external hard drive I used to share over the network from my Windows desktop -- which is now a Ubuntu desktop.I've tried setting it up as a samba share, and the closest I've gotten is mount error(12): Cannot allocate memory. I've tried the suggestions (editing /etc/security/limits.conf), and that removed the warning I got from testparms but didn't fix the mounting on my mythtv box.
I have 500GB external HDD. I have to mount it my CenOS -4.8 Machine.(kernel-18.104.22.168EL 32-bit) . External HDD partitions are ntfs file system partition. I have tried to mount ntfs partition in linux . But it's not done.
I have two 1TB HDD's formatted in NTFS, one has windows and other stuff i use even on linux and the other is all media. i can mount them easy, but this is a minor annoyance because everytime i log in i must type in my password. is there no way to have them auto mounted on startup?
Does someone know how to reconfigure this? I have three hard drives.
1. Sata 1TB. It has Windows xp and ubuntu 10.10 on it 2. old 30G drive. It has ubuntu 10.04 on it 3. Old 120G with ubuntu 10.04
I installed the oses on each drive by disconnecting the others. So each drive has a boot record, and I can choose by pressing F11 at boot. All ubuntus can see and mount the NTFS partition except the one I installed last. It's on the 120G drive.
I am having problems mounting an iso on my external hard drive. I do not want to move it onto my linux partition because it is 3.6 GB. I have a directory made (/media/iso) that I would like to mount it in, but if that doesn't work then I don't care where it goes. After I mount it I want to be able to run it using Wine, but that will come later. For now I just need to get it mounted. And, of course, I am fairly new to linux/ubuntu.
I've been checking the Forums and I can't find anything similar to my problem yet. I have 2 external drives that my UBUNTU 9.10 doesn't recognize, although I can see them perfectly in Win XP.I was using them in Ubuntu until 2 weeks ago, when this problem started and I can't find a way to see/mount them again. GPARTED doesn't find any of them; and when aply fdisk -l, can't see them either (only my internal HD).
I run 10.04 lucid in a laptop with EXT4 as filesystem, and I tried to mount an external hard drive from a Windows that, obviously, uses FAT32. Its the first time I try to mount a hard drive (external) since the upgrade to 10.04. Do I have to download some packages via synaptic? If not, what do I have to do?
Plus, I have run Code: sudo fdisk -l and this is what I get
I recently wiped and re-installed Ubuntu on my system Lenovo Thinkpak T510, now running 11.04. Before formatting my hard drive, I backed up all my information to an external USB Seagate FreeAgent Drive, which I reformatted to ext4 before copying my data there using a rsync command. After reinalling the operating system, I'm no longer able to get the drive to mount. I'm not quite sure what's going on. Here are the results of a fdisk command:
Code: $ sudo fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
I'm not able to mount the drive from my mac either. Did I do something wrong when backing up my data and loose everything (fortunately, most of it is also backed up elsewhere, just not all in a single place), or is there something else I can try to get it back?
I've recently started using a 500gb external hard drive for music and backups. It is always plugged into the computer but doesn't always mount at boot-up and I have to dis-connect and re-connect the USB cable. The desktop icon then appears.The fact that it's mount point changes also means I can't share the Music folder on the external hard drive via Samba (WinXP machines say they can't access the folder) and also Songbird 'loses' the tracks.
How do I permanently mount the external hard drive? I assume it will mean some editing of the fstab file? Unfortunately, I've got no idea of what I should enter on there.The external hard drive volume is called 'Music and BackUps' - Gparted screengrab attached.
I have an eSata external hard drive connected to my desktop running Ubuntu 10.04 LTS. I searched around for some info on how to mount an eSata external hard drive and was not successful. Most of the posts were talking about stuff after the drive has been mounted.
I have some documents that I need to copy from my old disk that has Fedora 9 on it. I bought external usb case for 2'5" disk but when I connect it through usb cable I can only hear it running but there's not much of the auto-detection.
Been using a SeaGate FreeAgent external drive for past 6 months. Suddenly the ext2 partition (/dev/sdb2) won't mount, while the NTFS partition (/dev/sdb1) does.I've been allowing automount, no entry in /etc/ fstab.When the NTSF partition mounts there appears an entry
I;ve been using Ubuntu (10.xx) for a few months now and am really getting the hang of it.My NAS drive has now failed.It is a WD Mybook world edition 1tb with the blue rings.The drive spins fine and in windows I can see the partitions but I understand the file system is linux based.Can anyone help as to how I can mount the drive and recover the files using ubuntu / linux.I have a USB caddy to connect the SATA drive to my laptop.
I have been trying to share folders from my main PC which is running Ubuntu 10.04. I have been able to figure out Samba enough to get my a couple of folders shared, but I have been unable to share any folders which are on my external harddrive. After entering the path in my smb.conf file they appear on the network but I am unable to navigate to them. When trying to navigate to them through the network folder on the pc they are actually connected to I get an "Unable to mount location: Failed to mount windows share" dialog box. On the windows pc I am trying to share with I get, "Windows cannot acces \Josh-Desktop ame of folder"
My smb.conf file looks like this:
That folders I cannot access are Music and Videos.