Hardware :: Ubuntu 10.10 32 Bit Linksys WUSB600N V2 Can't Install?

Feb 3, 2011

i'm very new at this and tried to install Linksys WUSB600N v2what i would like to know how uninstall any drivers/ software i may have already put on the os. how can i verifry that the device is functional after installing drivers.

View 1 Replies


ADVERTISEMENT

OpenSUSE Wireless :: Install Linksys WUSB600n Dual-band USB Wireless-N Adapter Onto A Desktop System With 11.1 Installed

Apr 27, 2009

I'm trying to install a Linksys WUSB600n dual-band USB wireless-N adapter onto a desktop system with opensuse 11.1 installed; this system will be migrating to a back porch with no cabling access, hence the wireless solution. Everything works fine under Windows XP, but on Linux, not so much. Hardware info is as follows; there is no "Wireless LAN" entry, but there is a USB entry:

99: udi = '/org/freedesktop/Hal/devices/usb_device_1737_71_noserial'
info.subsystem = 'usb_device'
usb_device.vendor = 'Linksys'
usb_device.bus_number = 1 (0x1)
linux.subsystem = 'usb'
usb_device.product = 'Dual-Band Wireless-N USB Network Adapter'
info.product = 'Dual-Band Wireless-N USB Network Adapter'
[Code]........

View 9 Replies View Related

Ubuntu Networking :: Linksys WUSB600N Cannot Get Recognized

Sep 3, 2010

I think lightning may have killed it. It was working fine. Now I cant get it recognized no matter what I do. It also quit working in Win XP where I never had a problem with it because it had its own connection software.

dmesg yields this-
RTUSB disconnect successfully
[ 312.876034] usb 2-1: new full speed USB device using uhci_hcd and address 7
[ 312.996021] usb 2-1: device descriptor read/64, error -71
[ 313.220031] usb 2-1: device descriptor read/64, error -71
[ 313.436038] usb 2-1: new full speed USB device using uhci_hcd and address 8
[ 313.556025] usb 2-1: device descriptor read/64, error -71
[ 313.780031] usb 2-1: device descriptor read/64, error -71
[ 313.996032] usb 2-1: new full speed USB device using uhci_hcd and address 9
[ 314.404022] usb 2-1: device not accepting address 9, error -71
[ 314.516021] usb 2-1: new full speed USB device using uhci_hcd and address 10
[ 314.924029] usb 2-1: device not accepting address 10, error -71
[ 314.924046] hub 2-0:1.0: unable to enumerate USB device on port 1
[ 343.664017] pan0: no IPv6 routers present
[ 809.024049] usb 1-1: new high speed USB device using ehci_hcd and address 10
[ 809.182271] usb 1-1: configuration #1 chosen from 1 choice
[ 809.182837]
[ 809.182839]
[ 809.182840] === pAd = ffffc20020b41000, size = 598568 ===
[ 809.182841]
[ 809.182845] <-- RTMPAllocAdapterBlock, Status=0
guest3@guest3-desktop:~$

View 4 Replies View Related

Ubuntu Networking :: Can't Connect To Wireless Linksys Wusb600n

Jan 3, 2010

i cant connect to my wireless network... im using karmic. Ive searched and found quite a lot of threads but arent sure where to start. I have a Linksys wusb600n, and are trying to connect to my network. It detects the network fine but doesnt connect.

View 1 Replies View Related

Ubuntu Networking :: Cannot Connect To Network Using Linksys Wusb600n V2

Jul 16, 2011

My OS is Linux Xubuntu 11.04 (32 bits) and I'm trying to get Linksys Wusb600n network adapter to work. I followed this post and did all that was written in it... almost. When i came to blacklisting, I blacklisted all drivers that starts with rtx (where x is any digit). Here are lines that I pasted in blacklist.conf:

Code:
blacklist rt2860sta
blacklist rt2870sta
blacklist rt2x00usb
blacklist rt2500usb
blacklist rt73usb
blacklist rt2800usb
blacklist rt2x00lib
blacklist rt2x00pci
[Code].....

The problem: I do see all available networks. So I guess... it somehow works. Anyway, problem is that it does not connect successfully to my network. I click on it - it asks my password. I enter it and click 'Connect'. Nothing, except that network icon is started to like spin around (trying to connect, I guess), happens. After few minutes, it asks for password.... again. I enter it and all starts from the beginning. Its like a loop! Note: I don't have any other things installed except linux-firmware-nonfree_1.9_all.deb and, don't know how successfully, but RT3572USB 2.5.0.0.

View 1 Replies View Related

Ubuntu Networking :: Linksys WUSB600N Connects On Startup And Then Disconnects?

Jan 17, 2011

Im having another problem with my wireless in Maverick, Im at my wits end with this thing and dont know what to do next. I followed Dev0's from this thread.And now when ever I start my computer I get a notification that says "Linksys C" connected. Then only a few seconds later it says Disconnected and then from then on every few minutes the Password prompt pops up and then I enter my password and then it just keeps going in that cycle until I click cancel.

View 1 Replies View Related

Fedora Hardware :: Linksys WUSB600N Wireless Usb Device 15

May 27, 2011

I started a fedora 15 live cd last night, and at the top right corner, i noticed that wireless was not active. Right mouse button on the internet icon showed me that fedoar recognized the usb device as it is,, a Linksys WUSB600N wireless lan.

However, fedora warned me that the firmware was not available, therefore i was not able to configure the WUSB600N. To be specific,, it's the V2 version.

My question is,, does this device work with linux fedora? i assume that i need to install the required firmware in order to use the device.

View 6 Replies View Related

Fedora :: Compiling - Getting Linksys WUSB600N Working On FC13

Aug 8, 2010

FC13 i686. Trying to compile a driver for Linksys WUSB600N Ver. 2 from a Ralink driver.tar.gz. Below is a portion of the output of the compile, I can't put this whole output on this LinuxQuestions Website it is to large.

In file included from /lib/modules/2.6.33.6-147.2.4.fc13.i686/build/include/linux/usb.h:21, from /home/jim/Downloads/RT3572/2010_0709_RT3572_Linux_STA_v2.4.0.1/include/os/rt_linux.h:62, from /home/jim/Downloads/RT3572/2010_0709_RT3572_Linux_STA_v2.4.0.1/include/rtmp_os.h:42, from /home/jim/Downloads/RT3572/2010_0709_RT3572_Linux_STA_v2.4.0.1/include/rt_config.h:72, from /home/jim/Downloads/RT3572/2010_0709_RT3572_Linux_STA_v2.4.0.1/common/crypt_md5.c:28:
/lib/modules/2.6.33.6-147.2.4.fc13.i686/build/include/linux/sched.h: In function "get_mm_hiwater_rss": .....

View 5 Replies View Related

OpenSUSE Wireless :: Linksys WUSB600N V2 Module Doesn't Get Loaded

Jan 18, 2011

After much tiddling'n'fiddling I finally got my new Linksys WUSB600N v2 working. Contrary to many posts, mine did NOT work with either the standard rt2870sta module, nor the updated version from the driver:wireless repo. Also the rt2870 version from the ralink website didn' t work. After a days worth of Googling I came across this post. The bottom line?

1. Download rt3572 from the Ralink website.
2. Add {USB_DEVICE(0x1737,0x0079)}, /* WUSB600N v2 */ to common/rtusb_dev_id.c
3. Follow README_STA

I did not install firmware packages. And be sure the rt2800sta module doesn' t get loaded. (you could just remove it, I suppose.)

View 9 Replies View Related

OpenSUSE Hardware :: Linksys WUSB600N And 11.2 - Ifconfig Doesn't Show A New Network Interface

Jan 24, 2010

I have a laptop running 11.2 with an internal Broadcom-based Wi-Fi card that's working fine. I'm trying to get 802.11n going with the WUSB600N. The USB ID on this device is 1737:0079. I believe this means it's a "V2" with an RT3572 chip.

No driver loads for this device when it's plugged in. If I do a "modprobe rt2870sta", a driver loads, and syslog shows "rtusb init" and "usbcore: registered new interface driver rt2870". But ifconfig -a doesn't show a new network interface. I've also tried building the RT3572 driver from the manufacturer's web site. It builds fine, and modprobe will load it, but I get the same results as the rt2870sta driver.

View 1 Replies View Related

OpenSUSE Wireless :: Linksys WUSB600N (rt2870) - Insmod: Error Inserting 'rt2870sta.ko': -1 Invalid Module Format

May 24, 2009

I'm new to openSUSE and as a matter of fact, to linux too. I've got a Linksys WUSB600N wireless adapter which used to work fine with some live versions of linux that I was testing out before moving onto suse... Each time, upon booting using live CDs, I used to copy the driver I had downloaded from:

SpeedShare - Download rt2870-kernel-2.6.24-nemesis.tar.bz2

Then 'make' and get into the driver's os/linux directory to load the driver using 'insmod rt2870sta.ko' Now, upon doing a 'make' and 'make install', followed by the 'insmod rt2870sta.ko', I get the error saying:

insmod: error inserting 'rt2870sta.ko': -1 Invalid module format

I tried doing 'modprobe -rv rt2870sta' and didn't get any error messages. But while doing 'modprobe -v', this error shows up: insmod /lib/modules/2.6.27.7-9-default/kernel/drivers/net/wireless/rt2870sta.ko
FATAL: Error inserting rt2870sta (/lib/modules/2.6.27.7-9-default/kernel/drivers/net/wireless/rt2870sta.ko): Invalid module format

View 7 Replies View Related

Ubuntu Networking :: Linksys WUSB600N Rev 1 Should "just Work" With 11.04

May 4, 2011

I see a bunch of posts about WUSB600N, often telling folks to download and compile proprietary drivers from ralink's website. With Ubuntu 11.04, getting WUSB600N to work might be as simple as disabling rt2870sta (for rev1). If you have rev 2 card, driver to disable is I believe rt3572sta. Even if you need to recompile drivers by hand, the right thing to do is to first try nightly build of rt2x00 drivers from [URL], and fall back to ralink provided drivers only if things do not work out with rt2x00 drivers. I saw recent updates on rt2x00 mailing list for rt3572 chip, give it a try if you have rev 2 card.

WUSB600N rev 1 (rt2870 chip) should "just work" with rt2x00 driver included with 2.6.38 kernel in Ubuntu 11.04. At least it works for me. You may need to blacklist rt2870sta driver from staging directory so that it does not load and interfere with rt2x00 drivers. There's one small annoying issue with power save mode on rt2870 chip when rt2x00 is in use, which seems to have just been fixed upstream. Most users will never notice it, but if you do notice card re-connecting to AP every 10-20 minutes or so, simply disable power saving, and all will be smooth (iwconfig wlan0 power off). If you have an older Ubuntu release (kernel 2.6.35) and rev 1 card, you should be able to download nightly build of rt2x00 driver from [URL]. It worked for me just fine with previous Ubuntu releases.

View 1 Replies View Related

Hardware :: Install Linksys WUSB 100 On Ubuntu 8.04 ?

Jan 25, 2010

I have recently purchased a Linksys WUSB100 for my Linux OS(8.04) and need assistance in setting it up. I am new to linux and would appreciate a step-by-step instruction on getting in working and need any neccessary drivers i may need. I really like using linux but just would like my wireless usb adapter to work.

View 9 Replies View Related

Networking :: Setting Up - Install Linksys WUSB 100 On Ubuntu 8.04

Jan 25, 2010

I have recently purchased a Linksys WUSB100 for my Linux OS(8.04) and need assistance in setting it up. I am new to linux and would appreciate a step-by-step instruction on getting in working and need any neccessary drivers i may need. I appreciate any help i can receive as it will be a big plus. I really like using linux but just would like my wireless usb adapter to work.

View 1 Replies View Related

General :: Instructions To Install Linksys Wrt54g V8 To Ubuntu?

Jun 8, 2010

I need to install my wireless router to my ubuntu powered Compaq C552US notebook.

View 5 Replies View Related

General :: Install Linksys Wusb54gc Adapter?

Apr 9, 2010

I bought this adapter today but my computer running on Ubuntu 9.10 doesn't recognize the CD.

How do I get this work?

View 3 Replies View Related

Ubuntu Networking :: WUSB600N V1 Install On 10.04 - Iwconfig Shows Wlan0 With An ESSID:"" And Nickname: "RT2870STA"

Jan 6, 2011

I've been trying now for 2 days to get my WUSB600N v1 adapter installed on 10.04. I'm a bit of a noob but have been able to follow some posts on here on getting it set up. This is what I've done:

Installed the Ralink RT2870 drivers. Changed the config.mk to enable some parameters. Compiled and installed. Added some entries to blacklist.conf. Updated network/interfaces to include my wpa settings and passphrase. Restarted/rebooted/reinstalled about 100 times!

Here's what happens: iwconfig shows wlan0 with an ESSID:"" and Nickname: "RT2870STA" iwlist wlan0 scan shows my router fine (although does not show Cell 02 which should be the 5GHZ range). So basically it's not connecting to my router. Not sure if I missed any steps. Will gladly provide some extra output if needed. Pulling my hair out over this now ready to throw the adapter in the trash.

View 2 Replies View Related

OpenSUSE Network :: Install The Drivers For My Linksys Wusb100 Ver2 USB Wifi Stick?

Jan 10, 2011

how to install the drivers for my linksys wusb100 ver2 wifi card. What I have found so far is that the usb stick uses a ralink driver (rt2870) I have read that I may need to compile the driver on my system but I am not sure how.

View 9 Replies View Related

Ubuntu :: WUSB600N Dont Work On 10.10?

Mar 27, 2011

i have a big problem to get my linkysy WUSB600N Wireless N Adapter to work . I have try it with the packages but don't work .

View 1 Replies View Related

Ubuntu Networking :: WUSB600n V1 - Won't Work In 10.04 Lucid

May 11, 2010

I've read many threads about the Linksys WUSB600n (both versions), and tried the suggested solutions to no avail in 32-bit Ubuntu 10.04. Compiling my own drivers, adding items to the blacklist, and even a clumsy driver transplant from 32-bit 9.10 have all failed. So here's the sitch: I have a Linksys WUSB600n v1 that works perfectly in 9.10 with only the minor modification posted by chili555 in this thread
HTML Code: [URL] That solution was: "

Code:
sudo gedit /etc/modprobe.d/blacklist.conf
Add three lines:
Code:
blacklist rt2800usb
blacklist rt2x00usb
blacklist rt2x00lib
"

I've tried the same in a clean install of 10.04, but no connection is made and a prompt comes up every few minutes asking for the password. I've used the included rt2870 driver in 9.10 without problems. My wireless-N network uses WPA2 personal encryption, which has never given me issues. The usb id of my adapter, per lsusb, is ID 1737:0071

[Code]...

View 1 Replies View Related

General :: Rt2870/wusb600n V.2 Not Detected By Ubuntu 9.10?

Feb 22, 2010

I have a Linksys wusb600n v.2/rt2870 that Ubuntu isn't dececting ndiswrapper is installed and appears to have taken well to the XP drivers but the card itself is still not being detected. I looked at the Linux drivers for it but i have no idea how to install the tar.tar.something file(i cant even find the ralink site anymore).to rest of the process. I even managed to make my way up to the library to get a couple of books but the latest one was written in 2006. I installed root and tryed a few commands but nothing made sence.

View 1 Replies View Related

Ubuntu Networking :: 9.10 - WUSB600N Ver2 Working In Karmic

Mar 1, 2010

I have a WUSB600N v2 and it is working great for me. Here is all you have to do. Go here and download the RT3572USB driver [URL] The file you download is called 2009_1222_RT3572_LinuxSTA_V2[1].3.0.0.tar.bz2 expand it with the command "tar xjf 2009_1222_RT3572_LinuxSTA_V2[1].3.0.0.tar.bz2"

open the file os/linux/config.mk and edit the following lines: Change HAS_WPA_SUPPLICANT=n to HAS_WPA_SUPPLICANT=y and Change HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n to HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y
Next edit the file common/rtusb_dev_id.c and add the USB ID of the card to it. {USB_DEVICE(0x1737,0x0079)}, /* WUSB600Nv2 */

sudo make
sudo make install
reboot and your done.

If you have added the USB device to any other drivers following other threads you will want to either remove that line and recompile those drivers OR black list those drivers. After doing the above this NIC is working great for me in Ubuntu 9.10 and getting N speeds.

View 8 Replies View Related

Ubuntu Networking :: WUSB600N Ver1 - Won't Allow To Connect Via Wifi

May 1, 2010

I was wondering if anyone figured out the WUSB600N ver1 with Ubuntu 10.4 yet. It's the chipset rt2870sta which works perfectly on Ubuntu 9.10 after blacklisting the other RT2x modules but following the same steps as I would 9.10 on the new release of Ubuntu won't allow me to connect via wifi at all. I went back to 9.10 for now but was hoping this would be resolved soon.

View 2 Replies View Related

Ubuntu Networking :: WUSB600N Unable To Connect Despite Able To See Networks

Jan 3, 2011

I've managed to install my WUSB600N on 10.10 (which was NOT easy!!) and I can see all my local wireless networks, but I can't connect - it attempts to connect then disconnects after what I guess is timing out.I know that you can place these cards in broadcast mode (I think), where you can see networks but not connect. Considering that to get this card working I had to attempt about four different sets of instructions to get this far, could I have placed the card in a broadcast mode? I've been at this for about three days, and unless I go out an buy another network card (I'm currently connected using it through windows) then I'm going to have to give up on Linux, which I really don't want to

View 9 Replies View Related

Ubuntu Networking :: WUSB600N Dead After Kernel Upgrade

Feb 8, 2011

I hate kernel upgrades, at least on my laptop. Every time I upgrade, I have to recompile the driver for my Linksys WUSB600N adapter or it doesn't work. Usually, this is no problem, as I have the driver saved in a .tar file and all I have to do is 'make' and 'make install' and it works. BUT... This time, I tried that, and I get this:

Code:
doug@dh-laptop:~/LOCAL/Software/RT3572_Linux_STA_v2.4.0.2$ make
make -C tools
make[1]: Entering directory `/home/doug/LOCAL/Software/RT3572_Linux_STA_v2.4.0.2/tools'
gcc -g bin2h.c -o bin2h
make[1]: Leaving directory `/home/doug/LOCAL/Software/RT3572_Linux_STA_v2.4.0.2/tools'
/home/doug/LOCAL/Software/RT3572_Linux_STA_v2.4.0.2/tools/bin2h
[Code]....

View 3 Replies View Related

Ubuntu Networking :: WUSB600N And 9.10 32-bit - Can't Connect To The Internet (unless Use The Wired Connection)

Mar 3, 2010

I have just installed a fresh copy of 9.10 on an older Compaq nc6000 laptop. I need some help getting my Linksys WUSB600N wireless adapter to function properly.

I have "half-way" connectivity, meaning that I can see (and connect to) my home wireless network but I can't connect to the internet (unless I use the wired connection). I have installed NDIS wrapper - no change

View 9 Replies View Related

Ubuntu Networking :: Cisco WUSB600N Rev 1 - Does Not Detect 5GHz Networks At All

Sep 17, 2010

There was quite a bit of threads about this card, and getting it to work mostly boils down to downloading Ralink's propitiatory driver. The card uses RT2870 chipset, and Ubuntu comes with two drivers that are supposed to support it, neither of which seems to work with WUSB600N. One of the drivers included with Ubuntu detects networks operating on 2.4GHz but fails to connect to them, but does not detect 5GHz networks at all.

I was wondering if anybody knows what is so special with this card that it doesn't work with drivers that are shipped with Ubuntu? The card works nicely with Ralink's driver, but it's a bit annoying to have to recompile it on every kernel update (would be much nicer if it worked with stock drivers).

View 3 Replies View Related

Ubuntu Networking :: Compiled Driver For WUSB600N But It Won't Load On Start-up Or On Inserting

Jan 4, 2011

I managed to find an older version of the rt3572 driver to compile to get this dongle to work fine, and it did. After that I added "module rt3572sta" (or whatever it is, not on Ubuntu to check now) to the end of /etc/modules. However, when I boot up Ubuntu, most of the time the driver won't load. If I run 'modprobe rt3572sta' from the terminal, I get this message -

[Code]....

View 6 Replies View Related

Fedora Networking :: Rt2870/WUSB600N Not Running On Startup?

Oct 4, 2009

my wireless adapter(WUSB600N) doesn't run when I log in. The driver is loaded on start-up but the green light is not on the adapter. I have to physically disconnect the adapter and plug it back in to get it recognised and it works fine afterwards

View 2 Replies View Related

General :: Broke Rt3572 Driver For Wusb600n V2 While Trying To Make It Better

Feb 7, 2011

I have been using UBUNTU 9.10 on a toshiba satellite notebook for about 8 months. My first challenge was getting online and staying that way with mobility. I purchased a Cisco Systems Linksys WUSB600N version 2 from the store and brought it home to install on my machine. My first install was successful, to some degree. I followed the instructions that I found here on our forums and was soon on my way.

After a while, though, I started being disappointed with my device's performance. It would frequently drop my connection, and was always reliably slow- even under a good signal. I assume that it can work better, so I proceeded to go back online, and search for a new driver. Herein lies my problem. Instead of searching for ways of optimizing the device performance I opted to install a new driver (which turns out to be the same driver).

I have read threads on installing the driver: [URL] which were very helpful the first time, but in my current position leave me hanging. I have read many pages on many sites trying to avoid posting un-necessarily, but to no avail. I think my problems stem from n00b status, and so I will divulge my symptoms:

1) I did not uninstall the first driver -- don't know if it's a problem, but i'm listing it --

2) I can't fully decipher the README file particularly this part:" 3>In os/linux/config.mk define the GCC and LD of the target machine define the compiler flags CFLAGS modify to meet your need"

# --I have followed steps 1> and 2> successfully, I think.

3) the error I receive when running make in the driver's directory is as follows:

make [1]: Entering directory '/lib/modules/2.6.31-14-generic/build'
make [1]: *** No rule to make target 'modules'. Stop.
make [1]: Leaving directory '/lib/modules/2.6.31-14-generic/build'
make: *** [LINUX] Error 2

I feel like I'm missing something essential in either the 'Makefile' or the 'config.mk' files, but now turn to the help of the community.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved