Hardware :: DVD / CDs Won't Mount After Recent Upgrade To 9.04 DBus Error

Feb 11, 2010

Unable to mount (DVD name) DBus error org.gtk.Private.RemoteVolumeMonitor.Failed: An operation is already pending I recently upgraded to 9.04. Installed medibuntu, ect, but still have this problem. I did not have the problem when I was using Hardy. The DVD I used yesterday was named "TNGS3D1", and though it showed up under places, clicking on the icon (right or left clicks) gave me the message above. Restarting and manually ejecting the DVD did nothing for it. I was able to finally mount the DVD yesterday, and operate it properly, after having this probem for several hours. I don't know why it suddenly worked, or why it doesn't now.

After using the DVD, I unmounted the icon on the desktop, but it is still listed under places. Today, I went to use another DVD, called "TNGS3D2". Again, it is listed under places, but it does not show up on the desktop. clicking on the icon just gives me the message again. Actually, now that I've typed all this, it's shown up on the desktop and works properly. (after approx. 20 min since closing the DVD tray) Is it jut slow? What can I do to fix all this? Why is yesterday's DVD still listed under places?

View 10 Replies


ADVERTISEMENT

Ubuntu :: U9.10 - Unable To Mount Audio Disc DBus Error Org.freedesktop.DBus.Error.InvalidArgs: Mountpoint Already Registered

Jan 13, 2010

When I install a commercial audio into the CDROM drive I get th following: Unable to mount Audio Disc DBus error org.freedesktop.DBus.Error.InvalidArgs: Mountpoint Already registered

View 1 Replies View Related

Fedora :: 15 - Iphone Won't Mount - DBus Error Org.freedesktop.DBus.Error.NoReply: Message Did Not Receive A Reply

Jul 5, 2011

when I connect my iphone (3GS, 4.3.3) to Fedora 15 it gives me this error: Unable to mount iphone
DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus). The weird thing: after looking in var/log/messages it appears that it is trying to be used by NetworkManager. And when I lookin NM, i can see iPhone as an ethernet device (cable unplugged).

View 4 Replies View Related

Ubuntu :: Error Mounting DVD / DBus Error Org.freedesktop.DBus.Error.NoReply: Did Not Receive A Reply?

Mar 17, 2009

I'm not sure what when wrong since I have a few DVDs and they all play well in my normal DVD player, I later attempt to mount it in my Ubuntu 8.10 I'm presented with the following message:

DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.

May I know what does this really mean?Is there something in my computer that require a fix?

View 2 Replies View Related

Ubuntu :: DBus Error: Unable To Mount

Mar 3, 2010

Ubuntu 9.04-amd64 After a recent update every time I insert a cd/dvd or usb flash drive I get the following error popup.

View 1 Replies View Related

Ubuntu :: Unable To Mount Ipod DBus Error

Jan 30, 2010

I've had my Ipod working fine using both Rhythmbox and gtkpod until a few weeks ago. Now, I can't get my Ipod to mount. My external hard drive mounts fine, just not the Ipod. When I plug it in I get the following message:

"DBus error org.gtk.Private.RemoteVolumeMonitor. Not Found: The given volume was not found"

I've tried to manually mount it and that doesn't work. I updated from Jaunty to Karmic hoping that would solve it. It didn't.

View 3 Replies View Related

General :: Unable To Mount Samba Share, DBus Error

Apr 14, 2010

Today when I try to mount a samba drive on my Ubuntu 10.04 server, which worked before, I now get the error message below:

DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus)

Any ideas is much appreciate.

View 1 Replies View Related

Programming :: Error: Dbus/dbus-protocol.h: No Such File Or Directory

Jan 24, 2011

do have installed glib and dbus and can find them manually , /usr/include/glib-2.0/glib.h , but while comipling applicaiton it gives following error messages.

/usr/include/libosso.h:32:18: error: glib.h: No such file or directory
/usr/include/libosso.h:38:23: error: dbus/dbus.h: No such file or directory
/usr/include/libosso.h:39:32: error: dbus/dbus-protocol.h: No such file or directory

View 1 Replies View Related

Ubuntu :: Unable To Mount IPhone DBus Error - "Mountpoint Already Registered"

Apr 25, 2011

"Unable to mount iPhone DBus error org.freedesktop.DBus.Error.InvalidArgs: Mountpoint Already registered" The above error appears upon plugging in my iPhone 3GS using a USB connection on Ubuntu 10.04. Attempting to transfer tracks to the iPhone (using Rythmbox) results in this error: "Error Transferring Track Error while getting peer-to-peer dbus connection: The name :1.140 was not provided by any .service files"

The interesting part is that I can unmount the iPhone get back into Nautilus and the iPhone icon will still be there on the left side pane. Unmounting from Nautilus does not get rid of the iPhone icon until I physically disconnect the USB cable from the iPhone. Clicking on the unmount/eject icon next to the iPhone icon in Nautilus removes the unmount/eject icon, but it does not remove the iPhone from the left side pane. My other USB devices, such as the 2TB external iOmega hard drive, exhibit identical behavior. I'm guessing that this is a gvfs bug since it appears very similar to other gvfs bugs that I've found from a couple of years ago. I am using gvfs 1.6.2-1ubuntu1~ppa1.

My iPhone used to sync work perfectly using this same Ubuntu PC as late as November 2010. There were no changes made to the iPhone, only updates to Ubuntu -- I'd like to emphasize updates; no new software was installed on this Ubuntu PC.

View 5 Replies View Related

Slackware :: Error With Gnome Slack Build (GSB) - ((Error Org.freedesktop.DBus.Error.AccessDenied.))

Jan 19, 2011

after install slackware with gnome using gnome slack build it is work fine Except some thing :-

the volume it is not work and get this error ((The volume control did not find any elements and/or devices to control. This means either that you don't have the right GStreamer plugins installed, or that you don't have a sound card configured. You can remove the volume control from the panel by right-clicking the speaker icon on the panel and selecting "Remove From Panel" from the menu.

No volume control GStreamer plugins and/or devices found.)) and the System Monitor give me this error when i want check the state of memory and processor ((There was an error executing 'gnome-system-monitor': Failed to execute child process "gnome-system-monitor" (No such file or directory)) and the memory flash not work and give me this error ((Error org.freedesktop.DBus.Error.AccessDenied.))

View 6 Replies View Related

Software :: Thunar-volman Won't Mount Anything HAL/DBus Complaining?

May 24, 2010

I'm trying to get automounting working with Arch on my laptop, and I've installed thunar-volman. The trouble is, whenever I put in a CD or plug in a USB mass storage device (thumb drive, USB hard drive, etc.), it gives me a dialog like the following: Quote:

Failed to mount [CD/DVD/USB device here]. Rejected send message, 1 matched rules; type="method_call", sender=":1.31" (uid=1000 pid=5706 comm="exo-mount) interface="org.freedesktop.Hal.Device.Volume" member="Mount" error name="(unset)" requested_reply=0 destination="org.freedesktop.Hal" (uid=0 pid=2186 comm="/usr/sbin/hald)).

I'm guessing this means there's some config in HAL or DBus that I need to fix, but I can't even begin to figure out what file it could be in.. I've tried searching LQ and Google to no avail. It seems that either the solution is sitting right in front of me, or hardly anyone even has this problem. I can mount the devices manually (as root), but like I said, if I put in a CD/DVD or plug in a USB storage device, or if I double-click the icon on the desktop, I get the above error. I've tried adding myself to the groups optical, disk, storage, and power, but I still get the same thing.

View 2 Replies View Related

Ubuntu :: Unable To Mount IPhone 3GS Since Recent Updates

May 30, 2011

I was quite pleased to see that Ubuntu 11.04 now loads and reads the contents of my iPhone 3GS.
(Once I connect the phone to my netbook, Shotwell and Banshee would recognize the cell-phone and give me options to manage my data.Alas, that joy has been very short-lived. As of the most recent updates, something appears to have 'broken' this functionality. [TODAY's DATE: Monday, 30 May, 2011],

Now when I connect the phone Nautilus fails to mount it, and I consistently get the same error message:
"DBus error org.freedesktop.DBus.Error. NoReply:Message did not receive a reply (timeout by message bus)"

View 7 Replies View Related

Fedora :: IPhone Fails To Mount On Fc14 After Some Recent Updates

Dec 2, 2010

I have a machine with a fresh install of fc14. When I first created the machine about 3 weeks ago I could attache my iPhone 3GS and FC14 (gnome) would detect it and I could use shotwell and rhythmbox fine. Ya!

Now as of about 1.5 weeks ago, when I plug in my phone I get a pop up with : Unable to mount Brian's iPhone DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus) dmesg doesn't show any errors, just that an iPhone was attached. Is this just me or are others seeing this? Any ideas as to what might be wrong?

View 1 Replies View Related

General :: Dbus Installation - Gives Error

May 10, 2009

I'm trying to install dbus-1.2.12, but configure gives me the error

Code:

I'm using Slackware 11, does anyone know how to solve this and compile successfully the library?

View 3 Replies View Related

Ubuntu :: Recent Upgrade Requires GRUB?

May 11, 2010

When I installed lucid, I opted not to install GRUB as I leave that job to a small 'rescue' Arch Linux install somewhere else on the drive. However, some recent upgrade (I'm having difficulty figuring out which one exactly) claims to require the packages 'grub-pc' and 'grub-common'.

I'm not sure but surely this is a mistake. Right? And if so, what are my options? Does installing the packages automatically install grub (ubuntu-grub, that is) to the (insert word for that first part of the HD where the bootloader resides....?) Or will I have to manually tweak the package installation to avoid installing?

View 1 Replies View Related

Debian :: Internal Error While Installing Dbus-x11

Jul 8, 2015

I am trying to debug the installation. One of the sub-processes that does not install correctly is dsub-x11, which gives me following error:

E: Internal Error, No file name for dbus-x11:i386

View 10 Replies View Related

OpenSUSE :: DBus Error : Unable To Get Transaction Id

May 30, 2010

After an udate I get this error message: DBus error : Unable to get transaction id from packagekit. This error also shows when I click the yellow triangle. When I start the manual update this shows:

[code]...

It seems some shell is not there anymore. What to do?

View 9 Replies View Related

Ubuntu :: Tweak 0.5.4.1 Unlock Dbus Error

Jul 13, 2010

When I click unlock in UT it doesn't do anything. Here is my terminal output...I've tried install/reinstall a dozen times.

ERROR:dbus.proxies:Introspect error on :1.61:/com/ubuntu_tweak/daemon: dbus.exceptions.DBusException:

org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.60" (uid=0 pid=23463 comm="/usr/bin/python) interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.61" (uid=0 pid=23468 comm="/usr/bin/python))

View 1 Replies View Related

Debian Configuration :: Errors During Recent Apt-get Dist-upgrade

Feb 15, 2016

This is on my AMD64 Testing box...A couple days ago during an apt-get dist-upgrade, near the end I saw the errors below.

I haven't noticed anything broken, yet. I usually only see dkms errors when VBox squawks after an update and I run /etc/init.d vboxdrv setup.

The section of the results containing the errors to the end of the output:

Code: Select allSetting up linux-image-4.3.0-1-amd64 (4.3.5-1) ...
/etc/kernel/postinst.d/dkms:
error: db5 error(-30969) from dbenv->open: BDB0091 DB_VERSION_MISMATCH: Database environment version mismatch
error: cannot open Packages index using db5 -  (-30969)
error: cannot open Packages database in /root/.rpmdb
error: db5 error(-30969) from dbenv->open: BDB0091 DB_VERSION_MISMATCH: Database environment version mismatch

[Code] ....

View 2 Replies View Related

Fedora Hardware :: No Sound Since Recent Update On F12 & Upgrade To F13

May 29, 2010

I have had no sound on my thinkpad x40 for a week now, first with f12 and now with f13. Under f12 I had sound until about 5/26/2010. I first noticed I had lost sound after some updates around that date. After not being able to solve the problem, I upgraded to f13, but still no sound.

pulsesound seems to be working. If I run pavucontrol and go to the playback tab, and then run paplay /usr/share/sounds/k3b_success1.wav from a console, it registers on the pavucontrol tab, but I hear nothing. kmix shows nothing muted. alsamixer shows nothing muted. pavucontrol shows nothing muted.

View 7 Replies View Related

OpenSUSE Hardware :: 11.2 - Recent Upgrade Of NVidia Driver?

Jun 19, 2011

I'm using a Dell Precision M65 portable workstation, often plugged to a docking station and with an external monitor attached. The graphic card is an nVidia Quadro FX 350M. I've been using openSUSE 11.2 until recently (with KDE 4.3.5). Then, during a routine update, the nVidia driver was upgraded from version 260.19.44 to 270.41.06. Desktop effects stopped working, and even after disabling them, some applications (presumably relying on direct rendering) do not work properly. I decided then to install openSUSE 11.4. The problems remain, with the additional issue that I can't switch anymore between the external monitor and the laptop display. I've tried several options using nvidia-settings; the original configuration when the system was working was "TwinView", "Cloned".

Direct rendering is still on:
Code:
phoebe:~ # glxinfo | grep -i rendering
direct rendering: Yes
but glxgears, for instance, while giving very high FPS, produces only a black window instead of the usual rotating gears.

The problem seems similar to the one cited here:
openSUSE:Most annoying bugs 11.4 - openSUSE
However, in my case, it appears with a driver newer than 270.29, so I am not sure this is the same issue. I also tried to follow the advices given here:
SDB:NVIDIA troubleshooting - openSUSE
without success.

I also noticed that my card (Quadro FX 350M) is no longer in the list of supported cards for that driver (the closest I could find is Quadro FX 360). But, again, it may not be relevant for this issue. So, at this stage I'm considering downgrading to the previous version of the driver (260.19.44). Before doing that, however, I thought to check for configuring options I may have missed.

Summary of HW/SW:
Model: Dell Precision M65
CPU: Intel Core2 CPU T7200 @ 2.00GHz
Graphic Card: nVidia Quadro FX 350M
Driver: NVIDIA 270.41.06
OS: Linux 2.6.37.6-0.5-desktop i686 [openSUSE 11.4 (i586)] + KDE 4.6.00 (4.6.0) "release 6"

The problem started with:
Driver: NVIDIA 260.19.44
OS: Linux 2.6.31.14-0.8.1-desktop i586 [openSUSE 11.2 (i586)] + KDE 4.3.5
and were absent with:
Driver: NVIDIA 260.19.44
OS: Linux 2.6.31.14-0.8.1-desktop i586 [openSUSE 11.2 (i586)] + KDE 4.3.5

View 5 Replies View Related

OpenSUSE :: DBus Error : Unable To Get Transaction Id From Packagekit

Feb 19, 2010

I just installed 11.2 kde 64 bit and I get this error: DBus error : Unable to get transaction id from packagekit. How do I correct this?also: the other updates have been running for a hour and they're still running. is this normal?

View 3 Replies View Related

OpenSUSE Install :: 11.2 Recent Upgrade Unable To Input At Login

Jan 9, 2010

I just recently updated to openSUSE 11.2, but after restarting my computer, I was unable to do anything with the keyboard(type my password, CAPS LOCK, Ctrl+Alt+Backspace) or move the pointer with my wireless mouse. After restarting the computer again, I turned on the touchpad of my laptop and was able to move the pointer using the built-in touchpad. After yet a 3rd restart, I could not move my pointer using any method.

After a 4th restart, I chose to enter the failsafe mode, where I could attempt to find the problem from the command line. I manually started KDM as root by typing in "kdm", but nothing happened, which means that the screen did not switch into graphical mode, but the terminal only accepted the command. Then, I manually started X as root by typing in "X", and X started. I only saw a black screen, but I could not kill X by the traditional "Ctrl+Alt+Backspace" and was forced to shutdown my computer via the power button.

I do want to note that on every boot of my machine, "WARNING" messages have begun appearing, but they went so fast that I could not read them. If there is any way to read them, I would greatly appreciate knowing. Also when updating my machine, I remember ignoring some dependencies for kernel-extra, kdm-branding, sox, and gcc44-fortran; but I did not believe that ignoring these dependencies could cause a broken system so I proceeded with the upgrade.

View 8 Replies View Related

Ubuntu Networking :: 10.4 Wireless Has Stopped Working Since A Recent Upgrade

Jul 9, 2010

Like many others it seems, my wireless has stopped working since a recent upgrade The answer does not lie in analysis of logs, settings etc. but surely with those who did it - they should provide a fix. I cannot believe everyone expects each individual users to go into their own analysis of why this is no longer working as it is clearly widespread. I have been using Ubuntu for 18 months without this problem on the same dual-boot laptop, and it still works on Windows as before, only Ubuntu 10.4 has recently stopped my network card from working.

I need to know when this will be fixed. I have been embarrassed by promoting Ubuntu to many colleagues who now also cannot work at home on their wireless networks. Seriously disillusioned I may start looking for a more stable alternative to Windows.

View 9 Replies View Related

Ubuntu Installation :: Upgrade A Live USB So The It Installs With The Most Recent Updates?

Mar 12, 2011

Is it possible to update a Live USB so that way when you use it to install to another computer it will install with the most recent updates? I want to install Lucid to my sister's computer, but it doesn't have internet so once its installed it's never getting updated again.

View 9 Replies View Related

Ubuntu Networking :: Wifi Stopped Working After Recent Upgrade?

Jun 18, 2011

i have a dell 1501 that has been upgraded from 10.10 to 11.04. everything was working okay. and then the user ran an upgrade recently. subsequently the wifi has mysteriously stopped working. it connects okay if one plugs it directly into the router but the wifi seems to have just stopped working.my mini 9 connects fine to the netgear wifi router using wireless.when i run the system tests for networking i get the errors..."root could not find def gateway info /proc""root could not find default gateway by running route"here is the output from some diagnostic commands.NOTE:this is similar to a post titled "wi-fi dead?" but the output is not quite the same...

lauren@lauren-Inspiron-1501:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.

[code]....

View 3 Replies View Related

Software :: Amarok Stopped Working At All - DBus Error - Gentoo

May 30, 2010

I'm not sure exactly when but my amarok has stopped working at all and just shows various errors. I've pasted binned it as its so long :[URL]

View 2 Replies View Related

Debian Configuration :: Hibernate Doesn't Work After Recent Kernel Upgrade?

Dec 15, 2010

I recieve the following error:

Cannot find swap device, try swapon -a
/bin/echo: write error: No such device

If I type swapon -a, I get something like this:
swapon: cannot find the device for UUID=4d79c009-9464-41d5-9f78-90644bca9ba3

It worked great before I did the upgrade... I've upgraded to 2.6.37-rc5.

View 11 Replies View Related

Ubuntu Installation :: DBus Error - No Such File Or Directory - Finish Install?

Apr 29, 2010

while upgrading to Lucid, I got the following error:

dpkg: Fehler beim Bearbeiten von /var/cache/apt/archives/dbus_1.2.16-2ubuntu4_i386.deb (--unpack):

unable to open '/lib/dbus-1.0/dbus-daemon-launch-helper.dpkg-new': No such file or directory I tried to just add the dpkg-new extension to the existing /lib/dbus-1.0/dbus-daemon-launch-helper - to no avail. How can I finish installing dbus?

View 1 Replies View Related

Ubuntu / Apple :: ITouch Dbus Error - Message Did Not Receive Reply

Mar 29, 2011

I recently updated my iPod touch to the 4.2.1 firmware. So I get the usual

DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus) Error. Yes I've tried the old "sudo apt-get update;sudo apt-get dist-upgrade"

but that was to no avail. way to fix this? Now click 'back'.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved