i format and reinstall centos after that i create one sambha share and valid users restart smb service but i am unable to access it from windows pc shows network path not found any other service need to start
I have centos 5.3 installed, while restarting httpd service I get error starting http:/bin/bash line 1 9941 segmentation fault /usr/sbin/httpd. If I stop httpd service and start it will start but if make service httpd restart it give above error.
I trying to install RALUS on my RHEL 5 os version 2.6.18-8.el5 (i386) My backup exec server is BE 2010 R2 the installation of ralus completes however with error libstdc++.so.5 missing noted that due to this i'm unable to start ralus service /etc/init/VRTSralus found a link [url] need to download compat-libstdc++-33-3.2.3-63.i386.rpm tried the rpmfind.net and as well as rpm.pbone.netid did find appropriate rpm however could not download one.
I am in the task of migrating old linux to new linux which centos 5.5. while moving out all apps ,data etc.I need to configure SSL in apache.I have installed mod_ssl with apache 2.2. i went though some docs to configure with certificate that I have . Not sure how to start the service in 2.2. The apache/SSL was configured in my old server which apachectl. SO after importing certificatr , I do ./apachectl startssl to take in effect. In my new server , the http service is /etc/init.d/httpd, not sure how to start SSL service in centos 5.5.
I have recently installed CentOS onto an old machine to get it up and running as a basic web/mail server. Originally the Network Interface worked ok, however I have been editing /etc/sysconfig/network-scripts/ifcfg-eth0 to try and set the IP address to be static.Now when I run the 'service network restart' command it won't bring the eth0 interface up and comes up with the following errors;
ifcfg-eth0 Line 3 DEVICE: command not found missing config file ifcfg-ifcfg-eth0
It doesn't seem to like any of the command words, even though most of these were in the original file that worked and the ones I added to do static I have commented out.
I've just compiled and installed some software (coova-chilli). I usually control this as a service so immediately after install I tried service chilli start I got the following error:
Starting chilli: which: no start-stop-daemon in (/sbin:/usr/sbin:/bin:/usr/bin)
If i run which chilli I get: /sbin/chilli I've tried 'updatedb' and a reboot but no luck. I remember a few months ago I was playing with chilli before and I this was happening. I had to run a simple command to update something or other and it fixed the issue. Of course, I can't remember what that command was.
Ok, so I have installed apache 22, mysql5.0 and proftpd1.3. When I reboot my server, the above applications do not start up automatically, and I have been trying to figure out how with out much success. know that I need to make some changes inside the init.d directory on my CentOS Server.I am running CentOS 5.4 x86_64 build.I really am not sure how to accomplish the task or where to start.
I have CentOS 5.2 just installed and massively updated with yum -update command. Than I tried to configure firewall. After changes via system_config_securitylevel_tui (open ssh, http, ftp, and 3306:TCP ports) iptables service can't start with message
> /sbin/service iptables start Flushing firewall rules: [OK] Setting chains to policy ACCEPT: mangle filter nat [OK] Unloading iptables modules: [OK] Applying iptables firewall rules: iptables-restore v1.3.5: Couldn't load match `TCP':/lib64/iptables/libipt_TCP.so: cannot open shared object file: No such file or directory Error occurred at line: 18 Try `iptables-restore -h' or 'iptables-restore --help' for more information. [FAILED]
I erased the iptables service and installed it again with yum. How can I make this service work?
i just finished installing CentOS 5 in my laptop. While I was trying to configure my Wireless network to connect internet, I found a guide in CentOS site which recommended to start "NetworkManger" service so as to setup wireless network. I followed and it Worked great.
But i would like to understand the difference between "Network" service and "NetworkManager" service. I had initially thought restarting "Network" service would help. explaining the basic difference between these 2 services.
I am unable to start apache on my linux machine with following errors Starting httpd: Syntax error on line 117 of /etc/httpd/conf/httpd.conf: Invalid command 'Order', perhaps misspelled or defined by a module not included in the server configuration I am using CentOS5 with apache version httpd-2.2.13
From my office and home, I can access a web service, no problem. However, from my server at the data center, I cannot. Could this be a DNS issue? I've tried with iptables enabled and disabled. selinux is disabled. This server has multiple network interfaces, one public and two private. The public has a WAN IP address (18.104.22.168), the private is 10.1.10.2 and the other private is connected via crossover cable to another server 192.168.100.1. I think route -n tells me the WAN interface is used to access the internet, as its gateway is my ISP's upstream gateway. CentOS 5.5.
I am using # uname -rmi 2.6.18-194.26.1.el5PAE i686 i386
# cat /etc/*release* cat: /etc/lsb-release.d: Is a directory Red Hat Enterprise Linux Server release 5 (Tikanga) CentOS release 5.5 (Final)
I have noticed that after few days of ideal system it will stop its network interface. To resolve this I have to login to the machine it self and then issue # service network start Is this a feature. If this is not a feature then what is this. As an workaround I am thinking of adding service network restart in cron tab for everyday in night when I am not using it.
I installed MySQL and I want the service to (always) start. When I google I always find the same answer; Goto System > Administration > Services. But I don have it. Administration for me goes from 'Printing' to 'Software Sources', so there's no 'Services'...
Also should I be able to start it from a shell, but I also can find that. (I have no /etc/rc.d/-directory and my /etc/init.d/-directory han no 'mysql'). I just started using Linux a few days ago (I only used MaxOsX and Windows before).
I have a service/daemon that won't start from boot. I have used the chkconfig --add <script name> command that went ok I also used the chkconfig <script name> on and that seems to be fine and I have made the script executable Chmod 777 <filename>. By all account it looks like the script is running at boot the the services has not started. When I do a ps -ef | grep ndb_mgmd this process is no there. the script can be run from the console and sems to run fine!
#!/bin/bash # chkconfig: 345 70 30 # description: MySQL Cluster management server start/stop script echo hello Paul >> /tmp/hello.txt configdir=/var/lib/mysql-cluster/
I know I have to count how many instances are running: ps x | grep apache2 | wc -l result if it's running: 2, or else: 1 I also know there is a command called test that I could use to perform the verification, but I don't know how to use test with wc
My dhcpd service get failed every time when I try to start it 1) Actually I have a lan connection which has a static ip network 192.168.10.0/24 and the pc to which is using the dhcpd has a ip address 192.168.10.1/24 2) And I have a internet connection wirelessly which has a network 192.168.2.0/24 Now I want to problem ip address in the network of 192.168.10.0/24
Here below is the configuration file of dhcp server: # dhcpd.conf # # Sample configuration file for ISC dhcpd # # option definitions common to all supported networks... option domain-name "example.org"; option domain-name-servers ns1.example.org, ns2.example.org; # Use this to enble / disable dynamic dns updates globally. #ddns-update-style none; .....
I have installed version of ntop 4.0.3 by guide.But I can't start ntop daemon/service. I didn't find a service file for starting.During the installation there was no problem only want to RRDTool so I installed that. Now there is no necessary package required.
I have found so many ways for root user to execute commands in so many possible path locations - but having difficulties on executing commands as normal user - during start up.This is what i've got for /etc/rc.d/rc.local script:Code:su -l user && (/bin/sh svc_cmd.sh &)But the command doesn't run at all...