General :: Static Ip On Debian And Nm-applet Doesn't Show The Networks At The Reboot?

Jan 5, 2011

I m trying to use static ip address on debian. I followed a tutorial and I modified the /etc/networking/interfaces but every time I reboot I can't do anything because the nm-applet says that I have select a manually connection..

View 1 Replies


Debian Installation :: Bootloader Doesn't Show After System Reboot

May 9, 2015

I wanted to switch to Linux from Windows so I decide to install Debian. The installation completed successfully but after that the bootloader doesn't show after the system reboot. So it is just black screen. I have an option for booting Debian (which will go to a black screen) and go to command line which looks like command prompt in Windows. I tried going to the command and it shows


I don't know which command to input since I'm a newbie and not familiar with Linux. I installed Debian from USB using unetbootin. What I should do to successfully install Debian?

View 8 Replies View Related

Networking :: Manager Not Listing All Networks / Doesn't Show Them In The List When Left Click The Tray Icon?

Jul 3, 2010

I have two wifi routers. If I stand next to the main one with my laptop I can connect and access the internet no problem. The other router is in my office, and the bridging is messed up, so while I see the essid and bssid using 'iwlist scanning' and nm-tool, I can't connect to it.

Now, my main router's signal still reaches to my office, just not as strong as the borked router in my office. I need to be able to choose which wifi network to connect to without wasting time walking between rooms. I added entries for both in network-manager, but it doesn't show them in the list when I left click the tray icon! How the do I connect to the network I want?

View 1 Replies View Related

Debian Configuration :: Does Not Show Wireless Networks Rtl8139?

Sep 25, 2010

I recently installed Lenny but have not been successful using the wireless. have previously used Ubuntu 8.04 where the wireless worked without problems (network-manager).I have also tried to install wicd but that too does not list any available networks. I have presently reinstalled network-manager

06:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)


View 10 Replies View Related

Debian Configuration :: Can Connect To Internet By WiFi But Won't Show Networks

Aug 28, 2015

I just freshly installed Jessie on my Dell Inspiron 5110, I configured the network on the installer and had no problem. I can browse the web, get updates and install software.

But I can't find new networks. It just show "No Networks".

lspci -vnn
Code: Select all09:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1030 [Rainbow Peak] [8086:008a] (rev 34)
   Subsystem: Intel Corporation Centrino Wireless-N 1030 BGN [8086:5325]
   Flags: bus master, fast devsel, latency 0, IRQ 55
   Memory at f7e00000 (64-bit, non-prefetchable) [size=8K]

[Code] ....

What input should I post?

View 13 Replies View Related

Debian Configuration :: Nm-applet Doesn't Start After (Testing)

Feb 22, 2016

After the latest update of network-manager-gnome to version 1.1.90-3 , I see that I have to start the nm-applet in Testing from a terminal, otherwise I can't bring up my wired connection.

The usual nmcli networking on command is failing to connect, also restarting the network-manager.service with systemctl doesn't do anything, the only way to connect at this time is indeed to manually start the nm-applet from a terminal.

I've also spotted this message in the logs:

Code: Select alltraps: nm-applet[1105] general protection ip error:0 in

Could it be something wrong with my configuration (although , it worked before this update) or is it some bug in network-manager-gnome 1.1.90 ?

View 4 Replies View Related

Ubuntu Networking :: Can't Enable Networks In The Applet?

Jan 31, 2011

I'm using Ubuntu 10.04 on my old HP laptop, and I can't enable ANY networks (ethernet and wifi) with the NetworkManager applet.This started after suspending the laptop. It wouldn't wake up, so I had to make a button shutdown.The "Enable network" checkbox apperars unchecked, but when I click it it doesn't get checked.The interfaces themselves are enabled and working, since the led on the ethernet plug is lit, and I can get a wifi AP list with iwlist scan (but I have to enable the wifi card first with ifconfig up)

View 7 Replies View Related

Ubuntu Networking :: Refresh Available Wireless Networks List In Nm Applet?

Jul 4, 2011

Is there a way I can refresh the list of available wireless networks in the network manager applet? It works correctly when I've just booted but doesn't after I resume after suspending. There's just a message like "wireless networks not available".

I can assure you that the wi-fi is not disabled using a button (my laptop doesn't have such a button), "Fn" key combination or in any other way and the network doesn't go down when I need it.

View 6 Replies View Related

Ubuntu Networking :: NM-Applet Static IP Setup On WLAN

Oct 7, 2010

I'm trying to use the nm-applet tool get a static ip on my wlan. I've created a configuration and set up the IPV4 settings ok but I can't figure out how to stop nm-applet from creating and using the auto wlan configuration. I've tried deleting the auto config but it seems to recreate it when I try to use wireless again. How to make the manual config the default or permanently disable the auto (dhcp) config?

View 2 Replies View Related

General :: Wireless On Letux 400 Finds Networks Doesn't Connect

Jan 13, 2010

I bought a Letux 400 mini netbook and it works fine except for wireless Ethernet. It finds wireless networks, including mine, and then pretends to connect, after asking for a password, but finally never connects. I tried reconfiguring the wireless network from g to b/g and finally to b only, but nothing changed. Cable connection works. Unfortunately all relevant Letux Web pages are hopelessly slow and certainly too slow to use the forum and ask questions there. why the thing doesn't connect and how to make it connect? If it recognises networks, shouldn't it be able to connect as well?

View 1 Replies View Related

Debian :: Unrecognized Partition - Doesn't Show The Right Name

Aug 7, 2010

I reinstalled Debian today, and changed partition tables. Now I have 4 partitions, 3 of which are encrypted, including / (root). Everything was fine at first, but now, instead of the partition label I've chosen, I see this: 120 GB Unrecognized Everything works fine, I just don't understand what this is all about.

EDIT 1:I don't understand something else too, which might be related. First time, I didn't need to enter root password for things like Synaptic and so, is this somehow related? (Now I'm being asked for, like normal way)

EDIT 2: I know the label is ROOT, I used e2label. But it still doesn't show the right name...

View 7 Replies View Related

Fedora :: Java Based Chat Or Drawing Site Doesn't Load The Applet - "Start: Applet Not Initialized"

Mar 10, 2011

I'm having trouble with my java, I got it to isntall, restarted but when I go to any java based chat, or drawing site it doesn't load the applet, the applet shows up it just says "Start: Applet not initialized"
Did I install it wrong?

View 4 Replies View Related

Debian Configuration :: Ssh Doesn't Work After Sending Reboot Command

May 2, 2011

last week while I was using ssh to the computer1 inside a NAT as usual, I made another tunnel from the computer1 that I was connecting to, to another computer2 inside that NAT (ssh and after making some changes in computer2 I typed reboot. The computer2 rebooted but the tunnel totally hung and I had to kill it in my laptop. Since that day I haven't been able to ssh to the computer1 as I am used to.

Here is some more information:

debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Offering public key: /home/une/.ssh/id_rsa


View 3 Replies View Related

Ubuntu Networking :: No Nm-applet - Couldn't Initialize The D-Bus Manager - Iwlist Scan Detects Networks

Nov 14, 2010

I'm running Ubuntu 10.04 server 64bit. I'm trying to get my ASUS PCE-N13 wireless PCI card working for searching and connecting to wireless networks. But I have no networks applet appearing in the panel. system->preferences->sessions has the Network Manager enabled The Notification Area is added to the panel. system->preferences-Network Connections-->Wireless[tab] shows a pink box, with no available connections.


View 9 Replies View Related

Debian Multimedia :: Scim/skim Doesn't Show Other Languages Than English?

Jul 28, 2010

I use Lenny 2.6.26-1-686 and kde 3.5.10I installed scim/skim and a great load of related packages and some fonts. I changed a lot of configuration files, so many times that I'm at a loss about them right now. Skim is starting with kde, and an icon is showing at the lower right corner. If I press Alt+F2 to run another app though, this icon disappears. I configured skim at the meny "Main Toolbar Configuration" to "always show" [3]. So I can still configure it from this Toolbar that is always at the desktop. But I can't really use the programme.

Well, I'm trying to type romanized Pali fonts (Pali is the language of Buddhist scriptures).When I run openoffice, for instance, and try to select the "input method" there's only English/European; Raw Code; and Keyboard for alternatives.I created the file "/usr/share/m17n/sa-translit.mim" with a map for transliteration of the special characters. I learned how to do this here:The first thing I noted is that when I pasted the content of the file to the terminal, some characters appeared as "blank squares". So I guess my system can't find any fonts installed to print these characters. But I thought I had installed the fonts that supported them (Gentium, Dejavu Sans and others). I must be missing something.

At the K-Menu, if I go to "Settings" -> "SCIM Imput Method Setup" it doesn't work any more. No window opens. At first, when I was starting to try to make it work, I could open this setup window and the "sa-translit.mim" file was there under the "Other" category (but it didn't really work, I don't know why). Now this setup doesn't run anymore, and at the "Configure" window for Skim I have only "English/European" and "Raw Code" at "Global Setup"-> "Other".But I have many things at /usr/share/m17n/ which should be showing here, I guess.

My /etc/scim/global
SupportedUnicodeLocales = en_GB.utf8
/DefaultPanelProgram = /usr/bin/scim-panel-kde


View 3 Replies View Related

Ubuntu :: Menu Does Not Show Any Wireless Networks?

Jun 21, 2011

I installed the one to see if u like it than u can install the real thing. But the menu dosen't show any wireless networks??

View 9 Replies View Related

Debian Configuration :: NetworkManager Doesn't Show (working) Internet Connection / Sort It?

May 14, 2010

I have no idea how I managed this, but I am able to connect to the internet but NetworkManager doesn't show any connection. This means that until I kill it, I cannot log in with Pidgin, because it is waiting for a connection.

Do I disable NetworkManager completely or do I try to make it recognize that I am connected to the Internet? If the latter, then how should I go about? (Please let me know which files I need to show you, because I know I've messed around with a couple).

View 2 Replies View Related

General :: 64-bit Doesn't Show 4GB RAM

Jun 4, 2011

I'm using a 64-bit release. But, my PC doesn't seem to show the full 4GB of RAM that is installed. It shows about 3.4 to 3.6GB of RAM (please see attached picture).I thought that if I could install a 64-bit OS that would mean that I have a 64-bit capable processor. I thought using a 64-bit release would show all 4GB or RAM on my PC. What am I doing wrong? My CPU is a Pentium 4 Prescott DT 630.

More information on my system is below:


$ lsb_release -rd
Description:Debian GNU/Linux 6.0.1 (squeeze)


View 6 Replies View Related

Ubuntu :: Maverick Doesn't Show Sub-menus / Show That?

Oct 14, 2010

Anyway since I upgraded to Ubuntu 10.10 when I right-click on something and there is another menu in that menu, it doesn't show up for the first time!

for example if I want to create a an "Empty File", I'll right-click on desktop and when I want to go to "Create Document" menu, it doesn't show up! so I must click somewhere else and try again so for the second time it works!!

View 9 Replies View Related

Ubuntu Networking :: Show More Wireless Networks In Network Manager?

Sep 11, 2010

I'm trying to search for more wireless networks but i cannot find a way to make network manager search for more wireless networks. It only displays 2 wireless networks and none of them is mine, even though I've got my wireless router at less than 1 meter from my PC.

View 2 Replies View Related

Ubuntu Networking :: Loosing Static IP Settings After Reboot?

Dec 1, 2010

I'm Using the latest Kubuntu 10.10 with the default network manager -- which I think it's called Knetwork manager.

I have set up a static IP by adding a new connection using this manager and then clicking it so that it is used to connect. But as soon as there is a computer reboot the connection falls back to the original autoeth0 which has dynamic IP on and which I cannot change or delete.

View 7 Replies View Related

General :: Dvd Drive Doesn't Show Up In Os Of Rebuilt Pc

Sep 17, 2010

dvd drive doesn't show up in os of rebuilt pc

My dvd drive opens and closes and shows up in the bios when i attach a hard drive that isn't working!!

View 7 Replies View Related

General :: Fix Grub Loader Doesn't Show Up

Jul 12, 2011

i have a Computer with windows vista and Ubuntu dual booted, the thing is i upgraded to win 7 and now the grub loader doesn't show up. Ive tried all the usual fixes but i cant fix it all i need is a CD ore something to get me into the Linux install

View 5 Replies View Related

General :: 'last' Command Doesn't Show Last Shutdown?

Jul 6, 2010

I shutdown around 4 - 5 hours ago which would be around 14:00 to 15:00 time range. But as you can see there's no entry for it. Why? and how can i find when i last shutdown?

lyle pts/1 :0.0 Tue Jul 6 19:18 still logged in
lyle :0 Tue Jul 6 19:15 still logged in
lyle tty7 :0 Tue Jul 6 19:15 still logged in


View 1 Replies View Related

General :: Doesn't Show The File That Exists?

Sep 10, 2009

we have installed vignette software on the linux box and would like to uninstall it. To uninstall it we need to delete one file named When we used locate, the file is found in 2 places. But when we used the ls -a in those locations the file is not seen. basically we want to remove that file. If we do rm, this also doesn't work. Also when we used find -H the file is not found. What is wrong here. I am sure the file will be added to file system as part of vignette. Can anyone suggest what could be wrong here.We logged in as root user to remove this file. Installation is done twice using root and vignette user ids. Thats why file is located in 2 places.

View 3 Replies View Related

Ubuntu :: Make Indicator Applet To Show Real Name?

Mar 31, 2010

i am using lucid beta 1 and indicator applet shows my user name. i know it is also the case for karmic. is there any way to change it so that it shows my full name? because it looks much more formal if it shows my full name instead of my "nickname".

View 2 Replies View Related

Ubuntu :: Weather Applet Does Not Show Australian Forecasts

Dec 3, 2010

There is a problem in the current version of the Gnome weather applet in that the web address it gets the details for a lot of Australian locations is no longer valid.

This is detailed in this bug report: [URL] and there is a patch for the source code for libgweather which now fixes it in the bug report.

Be warned that you have to currently compile your own fix and I found that the compilation process I used actually put the fixed library files in the wrong location - I had to manually move them to fix the issue (see the bug report for details).

View 1 Replies View Related

Networking :: Configure PC For Wired/static And Wired/DHCP Networks ?

Oct 27, 2010

I want my netbook to connect automatically to both the office wired/static network and to the usual wired/DHCP networks.

wicd is wicked but netsearching hasn't revealed how to configure it for both wired/static and wired/DHCP except by manually switching profiles.

wicd's profiles can use pre/post(dis)connect scripts but I don't know how to integrate them into wicd when they are upping/downing connections on cable (un)plugging.

If it is not practical to solve this within wicd, I'll explore standalone scripts to configure eth0 on cable (un)plugging, as detected by ifplugd.

View 2 Replies View Related

General :: Reboot The Server The Process Doesn't Start?

Mar 5, 2011

I need help adding a nohup command in this command line: su - rhx12 -c "/rhythx/rhythx/bin start /rhythx/rhyth" When I execute the script using root on the command line it works fine. But, when I reboot the server the process doesn't start. This script will go into the etc/init.d and rc2.d directory.

case $i in
su - rhx12 -c "/rhythx/rhythx/bin start /rhythx/rhythx"


View 2 Replies View Related

Ubuntu :: System Monitor Applet Didn't Show Anything Before Crash

Jun 8, 2011

my Dell OptiPlex 990 running Ubuntu 10.10 64bit is freezing irregulary after using firefox.The screen and the keyboard are frozen, all i can do is moving the mouse cursor, but i can't click at anything.The System monitor applet didn't show anything before the crash. I couldn't find the logs for the time before the freeze startetd.

View 3 Replies View Related

Copyrights 2005-15, All rights reserved