General :: Samba Error On Windows "Network Path Not Found"?

Mar 20, 2011

i am trying to solve this error from last 4 days.and dont know from where problem comes

i installed and configured smb.conf as follows:
workgroup = WORKGROUP


View 2 Replies


OpenSUSE Network :: Unable To Setup 10.3 As Samba PDC - The Network Path Was Not Found

Jun 1, 2009

I am trying for the last many days to setup my opensuse 10.3 as Samba PDC Server according to the URL mentioned below, but in vain:How to setup SUSE 10.3 as Samba PDC - openSUSE When ever I try to join a Windows XP machine to the domain setup on Opensuse, I get the error:'The following error occured while attempting to join the domain. The network path was not found'. What could be the reason for this error despite of the fact the I am able to ping the FQDN of the PDC from the XP machine, but the XP machine simply denies to join the domain because of the above mentioned error.

View 7 Replies View Related

General :: Vbox Sharefolder - Error: Systemerror 53 Has Occurred The Network Path Was Not Found

Jun 3, 2010

I installed vbox and windowsXP as guest and fedora13 as host. As discussed in [URL] i have run: Quote: $ VBoxManage sharedfolder add "WinXP" -name "Downloads" -hostpath "/home/rudra/Downloads" --readonly but in guest, as i prompted Quote: net use x: \vboxsvrDownloads it gives error: Systemerror 53 has occured the network path was not found

View 6 Replies View Related

General :: Unable To Access From Windows Pc Shows Network Path Not Found Any Other Service To Start?

Dec 11, 2010

i format and reinstall centos after that i create one sambha share and valid users restart smb service but i am unable to access it from windows pc shows network path not found any other service need to start

View 2 Replies View Related

Networking :: SAMBA: "The Network Path Was Not Found."

Oct 15, 2010

I've been having an issue with samba; connecting to a share from my Windows 7 machine.

Note: Windows 7 firewall has been turned OFF.

When I try to connect to the share from windows I get this error "Windows cannot access \PROSPERITY/home/queenl" , below that the error details are "The network path was not found."

It seems to me that the syntax is not correct, hence in the error it states "\PROSPERITY/home/queenl"

I am able to print to the printer that is being shared by samba..

Below is a copy of my smb.conf file. I'm using swat to manage my smb.conf file.

# Samba config file created using SWAT
# from UNKNOWN (
# Date: 2010/10/15 17:30:15
server string = %h server (Samba, LinuxMint)
map to guest = Bad User


View 2 Replies View Related

Software :: Error "Network Path Not Found"

Jun 19, 2011

i have problem in configuring samba 3.5 in redhat6 64 bit i can not access the linux share from show the error "Network path not found"

View 2 Replies View Related

General :: Installing Ffmpeg And Gcc - Error: No Acceptable C Compiler Found In $PATH

Jan 17, 2010

I am running a server which is hosting a site where members can upload videoclips. I noticed that upon upload a thumbnail is not created for the videoclip. I found out that ffmpeg needed to be properly installed and in my case ffmpeg-php as the site runs on php. So far so good. I followed the instructions found somewhere to install ffmpeg-php but stall at the command: dot slash configure && make The error I get is:

checking for egrep... grep -E
checking for a sed that does not truncate output... slash slash bin slash sed
checking for gcc... no
checking for cc... no
checking for cc... no
checking for cl... no
configure: error: no acceptable C compiler found in $PATH

I presume it's because gcc is missing. how I can start tackling the problem and ultimately get gcc running so I can install the ffmpeg? I am really sorry I was hoping to elaborate a bit more but I get an error: You are only allowed to post URLs to other sites after you have made 15 posts or more. so I guess I need to wait and describe it differently.

View 4 Replies View Related

Networking :: Ubuntu 9.04 SAMBA Not Connecting To Windows 98 Error Saying Inspiron 510m Is Not Accessible, The Computer Or Sharename Could Not Be Found?

Jul 15, 2009

My network comprises three PC's .... Windows XP, Windows 98SE and Ubuntu 9.04 running SAMBA. All PC's are configured WORKGROUP=WORKGROUP. The network connection To/From XP/UBUNTU via SAMBA Shares works perfectly OK. However, despite scouring all forum information regarding changes to Win98 ENCRYPTION, (Registry change re: DWORD "EnablePlainTextPasswords"), the Win98 PC refuses to connect to UBUNTU. The UBUNTU PC can conect to all the Win98 shared folders OK. I have disabled my Linux Firewall (Firestarter), I have run SMBCLIENT to check the user password for Win98 and it is validated OK. The Win98 error message is ....

"\Inspiron 510m is not accessible. The computer or sharename could not be found. Make Sure you typed it correctly and try again."

My samba.conf file is as follows ..... Any help or assistance PLEASE !

#======================= Global Settings =======================


## Browsing/Identification ###
# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = workgroup
# server string is the equivalent of the NT Description field

View 20 Replies View Related

OpenSUSE Network :: SAMBA As PDC On SLES 10.2 - Error When Users On Windows Client Try To Change Password

Oct 11, 2010

I installed SLES 10.2 with SAMBA to retire our old Microsoft Windows 2000 Server and save some money. All was fine until last week when our chief asked to me to set password expiration for all clients. This morning, all users cannot logon because, when they logon, windows asks to change password and then it gives error error "Access Denied".


View 1 Replies View Related

Server :: Samba And Karmic - Can't Find Network Path

Mar 8, 2010

a new hardisk and a reinstall later I find myself face with 2 problems now. firstly I followed, [URL]... which seemed to work fine, accross the network I can "see" all the workgroup computers. Now try login to karmic's or (other linux box) jaunty, can't find network path. tried turning off the firewalls, still no go. the two linux boxes can chat merrily, and the 2 windows boxes can chat, but to each other. however after fidling a bit , on karmic i now get

Quote: Could not display "network:///" Nautilus cannot handle "network" locations

so firstly how do i reinstall everything, the how deal with windows.

View 3 Replies View Related

OpenSUSE :: 9.1 / Error: No Acceptable C Compiler Found In PATH?

Jan 6, 2011

i'm a new on linux system and i have a problem with SUSE 9.1. I google for yast repositories to install "gcc" but i only see for release 10+. So i think 9.1 version it old version. The thing is that i can't upgrade the SO because it's a "sever" for some applications, and my problem is that i need to install Nagios, but when i type the ./configure command its says:

checking for a BSD-compatible install... /usr/bin/install -c
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for gcc... no
checking for cc... no
checking for cl.exe... no
configure: error: no acceptable C compiler found in $PATH
See `config.log' for more details.

So I decided to install packages with yast, but i can't find any active repository. I very new on this, and i don't know if i'm doing right the things. Also i don't have too much practice on english.

This is the info of the SO
* uname -a:
Linux noc 2.6.5-7.111-default #1 Wed Oct 13 15:45:13 UTC 2004 i686 i686 i386 GNU/Linux

* cat /etc/SuSE-release
SuSE Linux 9.1 (i586)

View 9 Replies View Related

Red Hat / Fedora :: Error: No Acceptable C Compiler Found In $PATH

Jan 30, 2011

I am trying to install Apache on my remote server. I've downloaded the latest Apache Http Server and when I configure it I get this error: configure error: No acceptable C compiler found in $PATH. So I download and extract the latest GCC Compiler and when I try to install that I get the same error:

configure error: No acceptable C compiler found in $PATH I am really stumped... Can anyone just offer ideas. My server is running CentOS 5.4 x64 and I'm remotely trying to download and install a running LAMP setup for Joomla. I'm using a shell to communicate with a cloud server type.

View 1 Replies View Related

Red Hat / Fedora :: Error: No Acceptable C Compiler Found In PATH

May 16, 2011

I am using Red Hat Enterprise 5 and have downloaded GCC 4.4.5 and trying to install or configuring the same, but getting some problem.

Code: # mkdir objdir
# cd objdir
# srcdir/configure Output of command
Code: checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu


configure: error: no acceptable C compiler found in $PATH See `config.log' for more details. this to install GCC package.

View 1 Replies View Related

Software :: Configure: Error: No Acceptable Cc Found In $PATH

Jan 24, 2010

I have had problems trying to use ./configure when compiling fvwm95. I get a error that says this


checking for cc... no
configure: error: no acceptable cc found in $PATH

View 1 Replies View Related

Ubuntu Networking :: Setting Up LAN - \Lstoragemusic Is Not Accessible - The Network Path Was Not Found

Jan 10, 2010

I would like to know if there is a fairly easy "How To" for setting up my home network. I have 2 XP SP3 computers and 2 Linux with ver. 9.10. The XP boxes can see each other and share files and folders. I can see from an XP box one of the Ubuntu machines, but can't access any of the files or folders.

I get the following when I try: \Lstoragemusic is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found.

View 9 Replies View Related

Red Hat / Fedora :: GCC - Configure: Error: No Acceptable C Compiler Found In $PATH

Jul 6, 2011

I'm pretty new at working with Linux/Unix systems, just started dealing with the CLI a week or two ago at work so bear with me if my questions/problems seem obvious, they probably aren't to me. URLs are at the bottom since I can't hyperlink to them. We have a server with Red Hat Enterprise Linux Server release 5.2 (Tikanga), x86_64 GNU/Linux. For the past few days at least (not sure when it began) every five minutes we get two messages for CPU0 and CPU1 saying: "Temperature above threshold, cpu clock throttled". Occasionally it says they are normal, so they're not *always* above the threshold but a majority the time.

The server doesn't have internet, so I interact with it and transfer files via ssh/telnet/sftp from my Windows PC to another server running Fedora release 10 (Cambridge) to the RHEL5 server. I have been trying to install lm_sensors to try and read the CPU temperature and possibly the fan speed, but every installation method has failed. I have tried installing it via the yum command I read about on this page (URL 1), but since it doesn't have internet access it didn't work. I then tried manually installing using the instructions on the page (URL 2), but whenever I try to install anything (gcc, libtool,

libsysfs) it shows:
checking for gcc... no
checking for cc... no
checking for cl.exe... no
configure: error: in '/home/user/src/libtool-2.4':
configure: error: no acceptable C compiler found in $PATH

I then looked up how to install gcc, but when I found a .rpm file of gcc 4.1.2 for RHEL5 I tried installing that like it mentions here (URL 3), but there are lots of [dependancy] programs I can't find a .rpm for as it seems they are all outdated and hard to find for RHEL5. Do I need to find the installation CD in order to install gcc? And is there any other way to check the cpu temperature or to know how to disable/fix the messages about temperature being above threshold?

View 1 Replies View Related

SUSE :: Error: No Acceptable C++ Compiler Found In $PATH See `config.log'

Jun 29, 2010

Install problem: no acceptable C++ compiler found in $PATH (Trying to install freeciv, game) ... checking whether we are using the GNU C++ compiler... no checking whether g++ accepts -g... no checking dependency style of g++... none checking whether the C++ compiler works... no configure: error: in /home/peter/Download/freeciv-2.2.1': configure: error: no acceptable C++ compiler found in $PATH See `config.log' for more details. Other threads suggest install gcc which I thought I already did yet it didn't solve the problem!

View 9 Replies View Related

Software :: How To Install The GCC - Configure: Error: No Acceptable C Compiler Found In $PATH

Feb 21, 2010

I just installed RedHat and I need to install a compiler (among other things). When I go to 'configure' gcc I get:

configure: error: in `/Compiler':
configure: error: no acceptable C compiler found in $PATH

Why in the world would you require a compiler on the install of your compiler!? I may be dumb in many respects, and I'm sure that people will attest to that, but I'm not that dumb...How do I install gcc without a compiler? What, specifically, do I do with the configure script (or executable, I don't know what it is...)

View 8 Replies View Related

General :: Change Windows Path To Unix Path?

Sep 14, 2009

I have a path c:windowsackup I need this string to be changed into /windows/back/up I used the command -bash-3.00$ echo windackup | sed 's/\//g' but the output is windbackup

View 7 Replies View Related

General :: Samba Authentication Error With Windows 7

Sep 20, 2010

I h ave a samba server which authenticate with MS AD, and this is working fine with XP and etc. But recently we have bought some pc's with Windows7 and when I try to access this share through Windos7

I am getting this error:

Is there any special thing that I need to do on client (windows7) side or server side for this to work?

My systems details:
OS - Red Hat Enterprise Linux Server release 5 (Tikanga)
Kernel - Linux server 2.6.18-8.el5 #1 SMP Fri Jan 26 14:15:21 EST 2007 i686 i686 i386 GNU/Linux
Samba - samba-3.0.23c-2

View 4 Replies View Related

Fedora Networking :: Unknown Samba Password - Use Samba For File Sharing Like On A Windows Home Network

Jul 17, 2010

I want to use samba for file sharing like on a Windows home network. Actually they are all Linux machines but nfs is too complicated. On my host machine I installed samba and system-config-samba. I created a new share for /home, check marked writable and visible and put access to everybody. For preferences-->server settings--> security the "authentication mode" is set to user, encrypt passwords is no, and guest account is no guest account. Under preferences-->samba users I added myself as a user with the same windows user name as my Linux user name and the same password.

My client is a virtualbox fedora (used for testing purposes but actual clients will be real computers on my home network). I entered the address smb:// When asked for the user name and password I put my regular user name and password since that was what I set in samba users. However, the password dialog keeps coming up and won't let met into my own computer. If I quit it says something like access is denied. How can I get my home network back? I liked this feature when my home computers ran XP but I switched them to Fedora 12.

View 2 Replies View Related

General :: Set Permission Of File On Samba Network Drive From Windows?

Oct 14, 2010

I am accessing network drive (Z:stream) on windows. Now the permission set on stream folder is like chmod -R 777 streams/ means all the files inside stream is at 777 but now i am copying some files from windows to this streams folder but permission on those files are not 777 ,i would like to have permission 777 on those files that copied from windows do i do that??

View 1 Replies View Related

General :: Windows 7 -Samba Share-Network Access Denied

Feb 8, 2010

I have set up RHEL 5 file server with Winbind and samba services running.I am able to assign and authenticate windows XP users against my RHEL 5 server.No issues.But one or two of my users are using Windows 7 Ultimate edition and they are not able to access my network samba shares.I can view the shares in windows 7 box but trying to access gives me "network access denied error".But i can access the same share in Windows xp machine for the above tested users.Working great but not in windows 7 box.I haven't tested with Vista OS yet.

View 2 Replies View Related

General :: Make Windows 7 Network Show Samba Share After VM Is Rebooted/restored?

Jan 18, 2010

On Windows 7, I have VirtualBox running Linux (Ubuntu 8.04), with Samba set up so that the Windows host can access it. But if the virtual machine is shut down & restored, or rebooted, the Windows Network no longer shows it. I've tried refreshing many times, restarting Samba, disabling/enabling the virtual network adapter, and running the succession of commands ipconfig /release, ipconfig /flushdns, & ipconfig /renew, but none worked. As a last resort I could restart the host itself, but is there a better way?

View 3 Replies View Related

General :: Cant Run Downloads - No Ar File Path Found

Oct 13, 2010

i can download but i cant run anything because there is no ar file path for ark. please dont tell me to download something to get the ar file path because if i download it i can't open it

View 1 Replies View Related

OpenSUSE Network :: Windows 7 And Windows LiveID Sign-In Assistant Working With SAMBA?

Dec 10, 2010

I have 3 computers. One running openSuse 11.3 with SAMBA and the other 2 are Windows 7 Professional boxes. I have the same user name and passwords for all three boxes.

From the Linux box I can access one of the Windows 7 boxes but the other won't accept my user name and password. The one that won't accept has Windows LiveID Sign-In Assistant installed. Apparantly that's an automatic install now.

I've read that there is a bug with the SAMBA libsmbclient [URL].

I tried updating via YAST but still end up with version 3.5.4-5.1.2 and this doesn't work.

View 1 Replies View Related

General :: Command Not Found For All But PWD And Echo - Path Empty

Mar 1, 2011

I logged into my Red Hat Enterprise Linux machine at work (use it for software development) and the primary GUI does not load. Instead, widgets appeared for xclock, xterm, and Firefox. In the terminal, I start typing in commands to try to figure out what's going on, but all commands are not found except pwd and echo. I 'echo $PATH' and that returns just an empty, blank line. 'echo $SHELL' lets me know I'm using cash.

The likely cause was my attempt to install Adobe Reader Firefox plugin yesterday. After it downloaded, I ran the binary but Firefox didn't seem to recognize that I had installed it, so I went into my .cshrc file and added the adobe folder to the path. That didn't seem to work, so I gave up, deleted the binary and the folder I installed to, and removed that directory from the path in the .cshrc file. This last thing (the export PATH line in that file) I'm certain is back exactly as it was before.

I have successfully added the /bin and /usr/bin back to the path from command line via
setenv PATH /usr/bin:/bin
but of course it doesn't stick after reboot nor does it magically load the primary GUI. I'd rather not go through the effort of creating a ticket for our company's Global Service Desk cuz there's no telling how long that could take to resolve. In the meantime, I can't do any programming.

View 23 Replies View Related

General :: PATH Variable - Command Not Found On New Terminal

Aug 3, 2011

I am using CentOS5.5 & everytime it is showing command not found. If I export the path as below it will be working fine until a reboot. Again same error i.e command not found if I open new terminal. Every time I am exporting as below:

#export PATH=/sbin/:$PATH
#export PATH=/usr/sbin/:$PATH
#export PATH=/usr/bin/:$PATH
#export PATH=/bin/:$PATH

How can I set these permanently as that the paths should automatically be exported for everyone user whenever the system boots. And command completion also should happen for eg. #fdi (press tab), then it should show available options such as fdisk, etc.

View 7 Replies View Related

Software :: C++ Gcc - Error - Program "make" Is Not Found In PATH

Jul 17, 2011

I recently installed openSuse and eclipse. im trying to build a simple c++ program. i installed gcc++. but when i build the program, im getting this error: Error: Program "make" is not found in PATH.

View 3 Replies View Related

General :: Samba File Permissions For Multiple Groups In The Same General Path?

Nov 4, 2009

I'm using my Linux (SLES 10) server as a File Server at this point. I need to set File Permissions to nested folders differently to different groups. For example:

homesharedengineering* should be read only for groupA
homesharedengineeringadmin should be read & write for groupB Plus read only for groupA
homesharedengineeringautocad should be read & write for groupC Plus read only for groupA

I've been using Webmin and Putty to set permissions but Putty only allows me the Default Group, it won't allow me to set several groups on the same directory. Webmin seems to allow me to add multiple groups (Webmin --> Others --> File Manager --> Info & ACL tab will provide extended abilities) but when I add multiple groups, they don't seem to take effect? I'm wondering if my setup at the 'Share' level or at the hierarchy of my folder structure (unix based) needs to be set specifically?

View 1 Replies View Related

Copyrights 2005-15, All rights reserved