General :: Lib/cpp Fails Sanity Check?

Mar 17, 2010

am trying to build some programs like lmms or qtraktorbut I often get the reported erro

View 3 Replies


ADVERTISEMENT

Programming :: C Preprocessor Fails Sanity Check?

Jan 31, 2010

Recently, every time I try to compile an app from its source code, after issuing the ./configure command I get this message:configure: error: C preprocessor "/lib/cpp" fails sanity checkSee `config.log' for more details.I check /lib/cpp but there is not directory named /cpp under /libthis problem occurs on all source packages.

View 3 Replies View Related

Software :: Gcc Sanity Check Fails After Restore Tar Backup?

Jul 2, 2010

is I've restored a tar.bz2 backup I've made, all fine until it comes to configure/make.the backup was made on my laptop, the transferred to another computer, I used tarxvpf filename
and sure backup was madetar -zcvpf filename / (--exclude=dev etc)dist is lfs,he laptopstill works fine, file date, size, mods all the same so quite pu as to way I get"/lib/gcc failed sanity check"when running .configurep.s. laptop and computer both based

View 2 Replies View Related

Software :: C Preprocessor /lib/cpp Fails Sanity Check - Every Single Time

Aug 3, 2010

I have no idea what I've done but I can't compile from source anymore.
VectorLinux standard 6.0

everything I try to compile fails at ./configure with an error :

Quote:

The content of config.log: (kinda long)

Quote:

This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake.

It was created by mpc configure 0.8.2, which was generated by GNU Autoconf 2.65.

Invocation command line was:

configure: exit 1

I was intending to recompile gcc from source instead of the the one came with the distro, but to do so I need MPC, which I can't compile.

View 18 Replies View Related

General :: Configure: Error: C++ Preprocessor "/lib/cpp" Fails Sanity Check

Jan 1, 2011

when trying to install a tarball i am getting the following error when configuring:

configure: error: in `/home/server/tazzed/mkahawa-printer-0.0.1':
configure: error: C++ preprocessor "/lib/cpp" fails sanity check

View 2 Replies View Related

General :: Tools To Check An HD For Sanity?

Sep 10, 2010

Updating my kernel corrupted grub preventing me from booting. Running the grub shell to restore the primary stage bootloader, restored bootability. It is important to note, that several months ago, I had a similar failure that corrupted the MBR.Are there any Linux based tools to check an HD for sanity? By the latter I am not only understanding software integrity but also hardware sanity.

View 1 Replies View Related

Fedora :: Compiling Code - Failing Sanity Check

Dec 7, 2009

Keep receiving the following error message when i try to compile any code:
Code:
checking how to run the C++ preprocessor... /lib/cpp
configure: error: C++ preprocessor "/lib/cpp" fails sanity check
logs test out some code with the C preprocessor and fail, thereby failing the "sanity check" I reinstalled cpp, but to no avail.

View 1 Replies View Related

Ubuntu Installation :: /usr/lib/libgconf2-4/gconf-sanity-check-2 Exited With Error Status 256

Sep 6, 2010

yesterday i tried to install bt4 from alongside ubuntu 10.04. Unfortunately the DVD had some errors and the installation stopped. Everything was fine till then, even the GRUB was working(i guess!) but when i tried to log into my Ubuntu it gave me an error... " /usr/lib/libgconf2-4/gconf-sanity-check-2 exited with error status 256" also there was a popup like "gnome power management was not properly installed ....blah blah blah Contact you network admin"

i have only one user on that system. i tried the single user mode but no success... i then tried to Ctrl+Alt+F1-F6 no success... can't switch to command line(this is my display problem i guess)

i have now decided to install a fresh install but i do need to take the backup. What all should i copy to the new install so that i get the same feel as before?

View 1 Replies View Related

Ubuntu :: Error After Updates - Gconf-sanity-check-2 Exited With Status 32512

Jul 22, 2011

I ran update through the terminal and rebooted i get this error message on start up and again after I log in Please Help!! I'm running Ubuntu 11.04 using unity 2d and the latest version of Gnome 2 on a Dell Inspiron 5150 laptop There is a problem with the configuration server. (/usr/lib/libgconf2-4/gconf-sanity-check-2 exited with status 32512)

View 5 Replies View Related

OpenSUSE Install :: Not Working Right - Error "There Is A Problem With The Configuration Server (/usr/lib/Gconf-sanity- Check - 2 Exited With Status 256"

Jun 20, 2011

Having downloaded 11.4 Gnome, finding it did not install I bought it on DVD from ebay, when trying DVD installation my PC is displaying: There is a problem with the configuration server (/usr/lib/Gconf-sanity- check - 2 exited with status 256, I would like to install this rather then just run it off disk

View 9 Replies View Related

Fedora Installation :: Upgrade RH9 To F10 - Install Fails - Installer Fails Media Check Due To "errors"

Jan 23, 2009

I am trying to upgrade RH9 to F10. I have downloaded dvd iso image i386. The SHA1 integrity check passes. The installer fails media check due to "errors". I did an independent verification of the DVD and zero errors found. Download was from Fedora's own torrent, so files should be verified anyway. If I bypass the media check I get the message : Running anaconda 11.4.1.62 the Fedora system installer - please wait.....

[Code]....

View 7 Replies View Related

OpenSUSE :: CD-R Burning Fails After OPC Check

Aug 1, 2011

I was able to burn a DVD-RW with K3B (after changing "sudo chmod 4755 /usr/bin/wodim") but when I try to burn to a CD-R it fails after the opc check. I tried changing the write-speed to 8X (since that's the max for this CD-R) but it still fails.

View 3 Replies View Related

Slackware :: Usbimg2disk.sh Fails On Dependencies Check?

Feb 11, 2010

Using 64bit current, I noticed that usbimg2disk.sh fails on dependencies check. It searches for mbr.bin in:

Code:
/usr/lib/syslinux/
but that portion of package now seams to be in:

[code]...

View 1 Replies View Related

Ubuntu Installation :: Take Root Menu Then Fails A Battery Check

Nov 18, 2010

My friend is having trouble installing Ubuntu on his Asus laptop. He says that when he boots it takes him to a root menu then fails a battery check:

[Code]...

View 3 Replies View Related

Fedora :: FC13 Error With RPM Check Debug Fails Update Of Kernel

Jul 10, 2010

Googled this and found the same problem mentioned in the yum site:
[root@plouton ~]# yum update kernel
Loaded plugins: refresh-packagekit
Setting up Update Process
Resolving Dependencies
--> Running transaction check
---> Package kernel.x86_64 0:2.6.33.6-147.fc13 set to be installed
--> Finished Dependency Resolution
--> Running transaction check
---> Package kernel.x86_64 0:2.6.33.4-95.fc13 set to be erased
--> Finished Dependency Resolution
Dependencies Resolved

View 4 Replies View Related

Software :: Glibc 2.9 - Make Check - Fails On Rt/tst-cputimer With Timer Sig -12 - Invoked To Soon

Feb 13, 2009

I wish to install a new libc.so and have compiled the latest glibc (2.9.90) with the latest gcc (4.3.3) and the latest binutils (2.19, compiled with gcc 4.3.3). Compilation succeeded without errors, although not before I did some non- obvious things (e.g., I had to put '-march=i686' into my CFLAGS to avoid getting undefined symbol errors from the linker). 'Make check' also produced errors, a number of which I averted by doing non-obvious things (e.g., I had to copy iconvdata/gconv-modules and libio/tst-*.input from the source
directory to the build directory, and I had to export into the environment TIMEOUTFACTOR=2; the glibc documentation gave me no clue that I had to do any of those things). Now I am running into an error with rt/tst-cputimer that I do not know how to avert. I have run 'make check' 3 times; here are the 3 results. From rt/tst-cputimer1.out:

And from rt/tst-cputimer2.out:

Before running the 3rd 'make check', I increased TIMEOUTFACTOR
(to 3). It made no difference. From rt/tst-cputimer3.out:

I don't want to install the new libc.so until I can get all the tests to succeed, or, failing that, until I understand the significance of the error, and can intelligently dismiss it.

View 2 Replies View Related

Slackware :: Root File Sys Check On JFS During Boot Fails With E2fsck Message?

Feb 21, 2010

After creating a new JFS root file system, boot (actually /etc/rc.d/rc.S ?) fails when checking it with:

Code:
fsck 1.41.8
/sbin/e2fsck: Bad magic number in super-block while trying to open /dev/sda7:

[code]....

View 2 Replies View Related

CentOS 5 Hardware :: File System Check Fails On Boot - Device Busy

Jul 20, 2009

The server comes up after rebooting and after setting the hostname it starts setting up logical volume management. It says that 2 logical volume(s) in volume group "VolGroupOO" now active But then it starts to check the file system and errors with fsck.ext3: Device or resource busy while trying to open /dev/sdb1 [failed]

***An error occured during the file system check
***Droppping you to a shell, the system will reboot when you leave the shell
Give root password for maintenace

After I log in with the root I get the message mesg: error tty device is not owned by group 'tty' Can the forum tell me how to troubleshoot this issue so I can boot back up again? I have 2 harddrives in this server and only 1 drive was detected when I first installed CentOS. The error first appeared when I mounted the 2nd drive at the mount point /UserGeneratedData. drive was formatted with ext3 before mounting and did not have any data on it I don't want any software RAID if thats what seems to be going on with "VolGroup00"

View 4 Replies View Related

CentOS 5 Server :: Updating Memcached Fails - Error With Rpm Check Debug Vs Depsolve

Aug 17, 2010

I am trying to run yum update on my CentOS 5.3 server, 32-bit, but it responds with the following:

Quote:Running rpm_check_debug
ERROR with rpm_check_debug vs depsolve:
memcached is needed by (installed) memcached-selinux-1.2.8-1.el5.i386

Complete (1, [u'Please report this error in [URL]...

View 1 Replies View Related

Software :: Rebuilt RAID Array With Old Mount Points Present - File System Check Fails On Boot

Dec 2, 2009

I have one hard disk for my root partition and a disk array on a separate mount point. I rebuilt my disk array, but I didn't delete my original mount points beforehand because I was hoping it would just "pick up". So now when I boot up, the OS tells me that the filesytem check fails because it can't find the array to map to the mount point. I know that I need to edit my /etc/fstab and remove the line that defines my mount point on the disk array. But it appears to be read only filesystem when I am in repair mode. I can't force the write with vi.

View 3 Replies View Related

Debian :: Migration Check List - To Check - Prepare Or Reconfigure

Feb 3, 2010

I am new to Debian but not Linux-based systems. I have been experimenting a lot with Debian Lenny/Squeeze. I am growing more comfortable each day with the Debian design. Yet there remain many unexplored areas. I am creating a migration check list. Things to check, prepare, or reconfigure when moving from one Linux-based system to Debian.

I have a good computer background and my current check list probably is fairly good. Yet I would appreciate input and opinions from experienced Debian users of things to watch in such a migration. Login defs, passwd/group files, different directory locations, keymaps, services and daemons, etc. I am not too concerned with the desktop as I plan to stick with KDE 3.5 for a while and I can basically move those settings across.

View 4 Replies View Related

Programming :: Check Menu & Check List In Utility Dialog?

Aug 19, 2010

I want to put check menu & check list in utility dialog.i dont know how i do this

View 1 Replies View Related

Server :: E2fsck Fails - Bad Block / Inode - Fails To Transfer

Mar 29, 2010

I have a 14TB raid, file system is read-only and I am trying to run e2fsck -B -p -C -v -y /dev/sdb1, it goes through, but fails and says bad block/inode or fails to transfer, something like that.Is there a way I can get this to run successful, this is a production storage server, its critical.

View 13 Replies View Related

General :: How To Check If LAN Is Connected

Feb 25, 2011

I want to write a script and put it in /etc/rc.local so that
if lan is connected then
rfkill block all
else
nmcli con up id 'Network id' --nowait
How should I write the if part and how should I check for "lan is connected" ?

View 1 Replies View Related

General :: Check If Ftp Is Installed?

Jul 26, 2010

I found that I have several services running related to ftp

Code:
cat /etc/services | grep ftp
ftp-data 20/tcp

[code]...

View 2 Replies View Related

General :: Check Overall Cpu Usage?

Jun 16, 2011

I wonder to know the command or the procedure to get the overall CPU utilisation in linux. I have used top, iostat, mpstat but the outputs are not the way i needed. Is it possible to get the output like...

CPU usage: .....% or something like that.

View 2 Replies View Related

General :: Check Another Server - If Down Then Do Something

Oct 18, 2010

I'm looking for an easy way to check if some server is down, and then act upon it. This check needs to be done from the backup-server. So if the backup-server thinks the production server is down, then in some bash script I want to execute a rule.

My question: what is an easy way to check another server ?
1. I know about Nagios. It's great, but to large to use here.
2. I could ping the server, put a ping that fails does not necessarily mean the server is down.

View 6 Replies View Related

General :: Check Which IP Using Bandwidth

Nov 7, 2010

Is there a way to check which IP is using the most bandwidth at any one time? I have a proxy server running and occasionally some users download videos instead of stream them, which hogs the bandwidth on their connection and denies other users access.

View 16 Replies View Related

General :: How To Check Ram Usage

Jan 4, 2010

I am running Slackware 13.0. I am aware of free -m, vmstat, top, etc. However, none of these programs display how much ram each program is using. Is there a program that displays how much ram each program is using? I run a headless so I'd need a program that runs in CLI.

I know that top command shows %MEM (only two programs were using 0.1%MEM) but after running free -m I only have a total of 400 MB ram left out of my 1.5 GB of ram. Where is all that lost ram?

View 9 Replies View Related

General :: Check Whether A Service Is Running?

Jan 29, 2010

I run a script manually like/usr/lib/openoffice.org/program/soffice and when I run

:ps -ef|grep openoffice

I get the following,

root 700 1 0 10:45 ? 00:00:00 /bin/sh /usr/lib/openoffice.org/program/soffice -calc

My question is how to check whether this script is running or not (It can be checked every 10 minutes) and how to make it as a service. (I don't have root access to put this in rc.local file or somewhere else).

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved