General :: Get An Arp Packet From Wireless Wifi Router?

Jun 16, 2011

I am trying to get an arp packet from my wireless wifi router (access point), to which I am not connected. I simply tried ping 192.168.0.1, but the answer was connect: network is unreachable. What can I do about that?

View 1 Replies


ADVERTISEMENT

Networking :: ARP Packet From WiFi Router - Ping Not Working

Jun 15, 2011

I am trying to get an arp packet from my wireless wifi router (access point), to which I am not connected. I simply tried ping 192.168.0.1, but the answer was connect: network is unreachable. What can I do about that?

View 5 Replies View Related

General :: RT2500 Wifi Card Could Not Connect To Wireless Router Using WPA Personal?

Sep 19, 2009

RT2500 wifi card could not connect to wireless router using WPA personal.OS - RHEL4; Dell Inspiron C600; interface detected ra0

View 12 Replies View Related

Ubuntu :: Get Wireless Access To WiFi Router With Xbox360 Wireless Network Adapter

Dec 10, 2010

I want to try to get wireless access to the wifi router with the xbox360 wireless network adapter.Is this possible?

View 1 Replies View Related

Ubuntu Networking :: No Wireless Or Wifi 10.10 Following Upgraded Router?

Dec 14, 2010

Upgraded broadband service yesterday and now using a combined router and modem (Virgin Media Hub). But I now have no wired or wifi internet connectivity on either of my ubuntu 10.10 systems. I tested it on my work laptop which uses Window and it works fine for wired and wifi.

With 10.10 I no longer have a network icon upper right panel to check, so not sure how to set up wireless. Both machines have static IP addresses and are able to ping each other but there is no internet connection on either.

View 5 Replies View Related

Ubuntu Networking :: Send The Keys Or Value As The Packet Data (content Of The Packet) In Ns-2 (for Wireless Environment)

Jul 12, 2010

I am the new user to ns-2. I would like to know is it possible to send the keys or some value as the packet data (content of the packet) in ns-2 (for wireless environment).

View 1 Replies View Related

Ubuntu :: Wifi - Wireless Card Isent Detecting My Router

Mar 8, 2010

My wireless card isent detecting my router even though it has detected my 3 of neighbors wifi. the only reason i thought that it may not be able to detect mine is that i use a wpa2 encrption rather then a wep like my neighbors. so i tried to go and reset my router using my other desktop and set it to a wep encryption, but for some reason my computer still did not detect it. i am using a dell dimension comnputer with both a linkseys N gigabit router model number :wrt310n and the reciving card linkseysduel band wireless N network adapter model number :wusb600n. can somebody please tell my what i am doing wrong? this is rather annoying as i have to drag my desktop and moniter out to the living room just to physically connect to my router to enable internet.

View 1 Replies View Related

Ubuntu Networking :: Connect WiFi Router TP-LINK TL- Wr942nd To Provide Wireless Internet To Other 2 PC

Oct 27, 2010

I have a telephone connection of 1 mega internet modem huawei mt 880 SmartAX my desktop computer is connected via an ADSL PPPoE.I use Ubuntu 10.04 in Spanish and want to know how to connect a WiFi router TP-LINK TL- wr942nd to provide wireless Internet to other 2 PC, a desktop with a plaquet wireles G CNet CWP-854 and 500 series notebook olivetti olibook. The issue is that when I connect the router I can not even go online and do not know how to operate the network, I can not even connect the desktop to my internet provider

View 1 Replies View Related

General :: Laptop As Router Between Wireless Router And Windows 7 Box

Aug 7, 2010

I'm using a cross-over ethernet cable to connect a Desktop Windows 7 box, and a laptop running on SUSE 11.2. I want Windows to connect to the internet via the laptop's wireless interface.

View 1 Replies View Related

General :: F12 Set Connection To Wifi Router?

Jan 30, 2010

I installed f12 and I want to connect to my wifi router with password. little bit ?I try to set a new wifi connection but I cannot activate it

View 6 Replies View Related

Networking :: Can't Access Public Wifi BUT Wifi Works On Router At Home?

May 13, 2009

the only error message I can find comes from "dmesg|tail"all it shows is
"no IPv6 router"any body know what is going on here or where where to look for more clues the next time I get around public wifi Oh the windoze washers and apple polishers don't seem to have any problems at all

View 4 Replies View Related

Ubuntu Networking :: Use One Wireless Router To Connect/detect To Another Wireless Router?

Aug 1, 2010

My son lost his USB Wireless stick for his Computer. I had thought I heard that if you had a second wireless router, you could use it somehow to detect the wireless router you have already set up in your home (like using a wireless card)? Is this what Ad-Hoc is? Either way, can this be done and if so how? I use a WRT54Gx2 Lynksys router and have a TRENDNET TEW-432BRP wireless router and also a spare D-link DI-514. I use ubuntu 10.04, and also wanted to know if I connected one of the router to his on the LAn port could he connect msaybe through an Ad-Hoc on my local computer here? He uses XP on his. I'm a newbie to linux and networking in general.

View 2 Replies View Related

Networking :: Cannot Ping Wireless Router Or Access Router Settings - Wireless ?

Jun 9, 2010

I moved my server and network equipment, and now the wireless works but I cannot get my server online. I host a website, so this is kind of urgent.

I have a wireless router and can access the internet fine on my laptop. My server is wired & connected to the router. It sets up the networking properly.. ifconfig has an ip address, the default gateway is present. But I cannot ping google, or even the router. It says destination host unreachable.

So I go back to the laptop to check the router settings.. sometimes it likes to assign the server the wrong internal ip. But, I can't access the router settings either! The page (192.168.1.1) times out. Same with trying to ping the router. How can the laptop be online if it can't reach the router?

Oddly, ifconfig on my laptop reports an ip address starting with 99.233. It's always given me an internal address starting with 192.168. What's going on here? Is the router not allocating an internal ip? I use wicd to connect, if it's relevant.

We have a windows laptop that can only get a "local connection". Now it does sound like the router is forwarding directly to my laptop, instead of allocating internal ips.

View 1 Replies View Related

Ubuntu Networking :: Share Wifi Over LAN To Wifi Router?

Sep 1, 2011

I have a pc which has 2 network cards, 1 wifi and 1 ethernet card.

I'm using wifi card to connect to wifi network (internet) and i'm planing to share this wifi/internet connection via ethernet to wireless router (siemens sx763) so i can have internet on my other devices, e.g. mobile phone, laptop.

View 2 Replies View Related

General :: Make Ubuntu Work As Wireless Router / Wireless Internet Sharing

Jul 18, 2010

My PC is connected directly to the cable modem. I would like to use my PC's WiFi card to share my internet connection with my Android phone and laptop so I can avoid buying a wireless router.

View 4 Replies View Related

Networking :: Get The Wireless Router To Connect To The Other Wireless Router?

Feb 16, 2009

This is my basic setup:

[URL]

I don't know how to get the wireless router to connect to the other wireless router so I can use internet on my computer. How do I achieve this wireless connection?

View 1 Replies View Related

Networking :: Setting Up Linux Box As IPv6 Router To Replace Netgear WNR1000 Wireless Router?

Jun 18, 2011

I want to set up a Linux box as a wireless router to replace our existing Netgear WNR1000 router, as I believe the Netgear does not support the coming IPv6 protocol. Unfortunately, it is not flashable with OpenWRT or DD-WRT presently.

As we have Comcast, our cable modem acts as a dumb modem according to the customer support guy I talked to, and our router is the one that asks for the IP address from DHCP. Thus, when Comcast switches over to IPv6, I don't believe my existing router would work, correct?

My idea is to take a Linux box and put two NICs and a wireless adapter in it, using IPCop or Smoothwall to set up a router. I could then enable IPv6 support for when we have IPv6 with Comcast. Is that possible? Would there be a way to get BIND to hand out private IP addresses in the same subnet on the both the LAN NIC and the wireless card?

View 1 Replies View Related

Networking :: Network Setup - Router - Wireless Router Card ?

Apr 24, 2010

I'm having trouble getting my network set up the way that I want it/had it. You see, when I first set up my network, I just had my cable modem going directly to my standard wired router (A D-Link DI-604), which had DHCP,and was connected to all of the computers on my network. I had one switch hooked up to one of the ports of the router, but this was a regular switch, and it would not try to assign IP addresses, it would just pass through the DHCP info as I wanted.

Now however, my network setup has changed. My room mate and I both got laptops, and we decided that we wanted to have wireless access so we didn't have to constantly plug in to the router.

Now my network is set up like this: The modem is hooked up to the router(DI-604), which is hooked up on the LAN side to our computers, our switch (which is hooked up to 3 more computers), and to a wireless router card (A Gigabyte GN-BC01).

The wireless router card has two jacks for ethernet. One for WAN, and one for LAN. The LAN side we have plugged only into the computer in which the card is installed.

Now the problem is this: The wireless router card comes with DHCP by default, and it's assigning addresses to the laptops and to the computer hat it's in, and worse, the IP addresses are on a different subnet than that of the main dlink router. The Main (dlink) router assigns addresses from 192.168.0.1 (itself) to 192.168.0.254, while the wireless router card assigns addresses from 192.168.1.1 to 192.168.1.254 (itself).

Because of this, I cannot access services on the wireless network from my wired network or vice versa. The first thing I tried was setting the card to assign addresses from 192.168.0.12 to 192.168.0.253, however it just said "internal error" when I tried to do this. I decided that this may be because it sees that it was being assigned an address on it's WAN side on the same subnet. So the next thing I tried was disabling DHCP and setting the "LAN IP Address" to 192.168.0.12, hoping that the DHCP would just go through the card, like a switch. I would have set the LAN IP address to be assigned by DHCP, but this was not an option, so I decided that'd be the best thing to set it to.

Once again however, setting the LAN ip address to an address on the same subnet as that of the IP assigned to it's WAN side caused it to report an "internal error". I verified that this was the issue by setting the LAN address to several other private IP addresses to test (I.E. 10.0.0.1, 192.168.3.1, 192.168.5.12).

My question then really is: How do I set up both routers so that I can access services and computers from each network from the other network. Should I set them with different subnets and set the gateway on the wireless network to the main router? To the wireless router card? Should I put them on the same subnet? Will it know how to communicate?

Here is a link to (picture) my network diagram. Network Diagram

View 2 Replies View Related

General :: Wireless Router Can't Be Found?

Jul 27, 2010

I have a very strange problem with my wireless routers, or linux. I have 2 wireless routers one directly connected to my modem (router 1) and another wireless router (router 2) on the 2nd floor connected to router 1 without cables and configured as a repeater bridge. Router 1 is configured to broadcast the ssid and have been set up to use wpa-personal and router 2 has the same configuration as router 1 plus a virtual interface.

I am able to connect to both routers from all my windows boxes, but I fail to connect from linux (I have tried with 2 different laptops without luck). What is very strange is that I can't see the routers when I scan but I am able to see my neighbors routers. I have tried to turn off router 2 to see if it had an impact, but no luck. I know that I am able to connect to a wireless router since I have had success with that at work.Router 1 is a Siemens se551 (with default firmware) and router 2 is a linksys wrt54g (running DD-WRT build 13064).

View 1 Replies View Related

General :: Connect To A Wireless Router?

Mar 13, 2011

I just downloaded ubuntu 10.4 today. I can't seem to figure out how to connect to the Internet.

View 7 Replies View Related

General :: Wireless ICS Network Without A Router ?

Feb 5, 2010

I have a desktop running Ubuntu 9.10 with a D-Link WUA-1340 (Supported - last on list) USB wireless adapter, through which I would like to set up a wireless network for internet connection sharing at home.

I have 2 ethernet adapters on my desktop (Eth0, Eth1), and an Apple Airport Express, which I initially tried to use, then thought it might be better to just bypass the Airport Express.

My problem is that although I create a wireless network and connect to it with my macbook, I am unable to access the Internet on it.

I am not sure what I am doing wrong, and have worked through WifiDocsShareEthernetConnectionThroughWireless a few times, as this seems to be exactly what I am trying to do.

View 2 Replies View Related

Networking :: Find Out What Is The Difference Between Wifi0 And Ath0 (atheros Wifi Card) In Terms Of Packet Counters Shown In Proc/net/dev Pseudofile

Aug 20, 2010

I'm trying to find out what is the difference between wifi0 and ath0 (atheros wifi card) in terms of packet counters shown in proc/net/dev pseudofile. The fact is that wifi0 and ath0 packet counters are different. I've read that wifi0 refers to the physical device and ath0 refers to virtual device over wifi0, so, as far as I know, packets counters in both devices should be the same, isn't it? Another annoying question for me is that ath0 doesn't show any erroneous packets, while wifi0 does.

[Code]..

View 6 Replies View Related

General :: Wireless Networking - Use Mint To Act As A Router?

Oct 7, 2010

Can I use Mint as a Router service, similar to the service in Ubuntu (called: Router Advertisement Daemon?). Does Mint support this and what solutions are available for this?

Have dabbled in Linux very briefly, but almost no experience on how to install or find programs, so please explain in detail!

EDIT: I'm looking for something easy and simple, like what Virtual Router or Connectify does for Windows 7...

View 3 Replies View Related

General :: Transform PC Into Wireless Router For Home Use?

Feb 16, 2010

I obtained some old PC and I've installed debian linux on it. Now, I have onboard ethernet slot (10/100) and net works fine. Into PC's usb slot I've plugged Bus 001 Device 002: ID 0bda:8189 Realtek Semiconductor Corp. RTL8187B Wireless 802.11g 54Mbps Network Adapter and I want to know is it possible to transform this PC into wireless router for home use? If so, what do I have to do?

View 3 Replies View Related

General :: Distros Will Not Connect To Wireless Router?

Jun 12, 2011

There's only one thing preventing me from completely making the switch from Lose-dows to Linux: inability to connect my laptop wirelessly. I'm currently using an old IBM Thinkpad with an Intel Pentium III, 1.13 GHz with 384 megs of RAM. The wireless is through a Belkin USB dongle (model: F5D8053, v3) and a Netgear Duo Wireless-N Router (model: WNDR3300). Let's say, for sake of argument, I'm using Linux Mint Julia. It clearly must recognize the USB dongle, because it can detect all the other networks in the area, including the Netgear. But it won't connect to it, or any of the secured ones.

So what's the deal? It'll connect when connected directly, so it's not the computer. Or is it? All I know is I'll have to wait til I get an LFC interface (LFC=Long F**king Cable) before I want to connect Linux to the net.

View 5 Replies View Related

OpenSUSE Wireless :: Connecting To Wireless Router - KNetworkManager The Wireless Tab Is Desibled

Apr 1, 2010

My first problem is that when I open KNetworkManager the wireless tab is desibled,I don't know why! My laptop is HP pavilion dv6-1245DX. How to get connected to my wireless router?

View 9 Replies View Related

Networking :: Ubuntu 9.04 Can't Connect To Wifi With Intel Wireless WiFi Link 5100?

Aug 29, 2009

I have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns

00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port

[code]...

View 3 Replies View Related

General :: Connect A Wireless Router To Another Access Point?

Aug 19, 2011

I have a complicated situation due to my goals and network structure. I have in mind a potential solution, a bridge, but I do not know whether it is feasible or what hardware it will require.

The network:

My apartment community provides residents with free Internet access through an ancient T1 line. We do not have the option of other Internet providers, so having a router and modem in the home are not an option. The T1 line is split among some 24 switches, one for each building, and each switch has one port per floor. At each floor, there is a D-link WAP, and each has a separate SSID and WEP key. Additionally, they control access at the switch level using Access Control.

My goals:

I'm used to being in control of my networked environment. I like to have friends over often, and most of them have a laptop, a smart phone, or both, which makes Access Control a pain. I don't want to have to think ahead and get their MAC addresses to the IT consultant while he's here during business hours. My wife and I have 6 devices, two of which require an Ethernet connection.
I use a few applications for streaming that utilize UDP (I'm not sure if the WAPs are smart enough to even handle this) and I don't like having my traffic muddled with my neighbors.

I should note that I tried extending the network with my Airport Extreme router, which apparently only works with other Apple devices. I've also looked into WDS, but that seems to require an unlikely amount of cooperation from the IT consultant on site.

The potential solution: a Linux server that acts as a router. Ideally, it could act as a webserver for a small static site as well, but let's focus on the routing. I'd like to bridge two NICs and use masquerading (Internet Connection Sharing). The public interface would connect to the WAP using WEP. The private interface would allow up to 8 devices to connect to the server.

It seems easy enough to configure the public interface, and even to bridge the connections. What I've never done before is purchase a wireless card that can accept multiple clients. Maybe they can all do this?

View 2 Replies View Related

General :: Connect A Server Using Centos 4.8 Onto A Wireless Router?

Oct 6, 2010

want to connect a linux server using centos 4.8 onto a wireless router. then clients will access mails/internet using the wireless router. how do l go about it. anyone with an example

View 4 Replies View Related

General :: Connecting To Sitecome 300N Wireless Router?

Jan 12, 2011

Running Suse 11.3 (Gnome) on an Acer Aspire 5310 Laptop.Installed all the default broadcom drivers via install software.The following I tried:

/usr/sbin/iwlist eth0 scanning
eth0 Interface doesn't support scanning.
bodifee@linux-wv6l:~> /usr/sbin/iwconfig
lo no wireless extensions.

[code]....

So card still not active i seems.Have deleted and added wireless adapter

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved