loading /usr/bin/teclafsck failed. please repair manually and reboot. the root file system is currently mounted read-only. to remount it read-write do:bash# mount -n -0 remount,rw /attention: only control-d will reboot the system in this maintence mode shutdown or reboot will not work.
I have Ubuntu 9.10 installed on my HP desktop, but I'm running an older version (8.10) on a live CD so I can at least get online to ask for some When I tried to log on earlier it went to a command prompt and said the 'file system check failed' and to run fsck manually. I entered 'sudo fsck' at the prompt and I selected "y" to fix all the bad inodes, when it was complete it told me to restart, I then entered 'sudo restart' at the prompt and it said 'sudo uuid unknown'. I have not installed anything recently and I'm not sure what to do.
RHEL 5.4. I'm facing the following error after rebooting the server: /dev/VolGroup01/u04: UNEXPECTED INCONSISTENCY Run fsck Manually" *** An error occurred during the file system check. *** Dropping you to a shell: the system wil reboot *** when you leave the shell. give the root password for maintenance:
-Previously I performed a lvreduce command on a LV, after the lvreduce, I reboot the server. -After login as root I run: e2fsck -f /dev/VolGroup01/u04
But, it shows: The filesystem size (according to the superblock) is 5218304 blocks The physical size of the device is 1310720 blocks ... either the superblock or the partition table is likely to be corrupt abort<y>? no pass 1: cheking inodes, blocks, and sizes error reading block 1310722 (invalid argument) while doing inode scan inore error <y>? y
-Additionally, trying to lvdisplay, it shows: Locking type -1 initialization failed I have no important data on that LV, but I can not boot the server properly.
I want the filesystem of my external drive to be checked periodically after a numer of mounts. I put 2 in the sixth colums of fstab for this partition
Code: /dev/sdb1/mnt/hdext3rw,dev,sync,user,noauto,exec,suid02 and I use the tune2fs to set the maximum mount count to 32. Code: tune2fs -c 32 /dev/sdb
now the mount count is 34 and the date of the last check is not recent, so apparently the auto fsck has not been performed. Probably because this partition is not mounted at start-up but I usually mount it manually.
It then says an automatic fsck failed and a manual fsck must be performed, then the system restarted. I have done a manual fsck and it did nothing. I booted up the system with knoppix and did it, nothing.
I have debian testing installed on my system. I have a separate home partition which i shared with Pardus2009 which i installed later on a different partition.
Now pardus boots fine without errors, but debian says "filesystem check failed" because last mount time of / is in future. it gives a maintenance shell and after a manual fsck corrects this problem, debian reboots fine, but then says theres a problem with the /home partition (but this can be ignored)
my cmos battery is dead , not worrying that much about it but the problem is ubuntu , it has trouble booting thanks to fsck , there is a bug herebut i cant boot , i get the following error # Superblock last mount time is in the futureand i cant boot , i can get it working sometimes , with allot of work , but normaly it just fails !i came to the conclusion that the CMOS time and date keeps reseting and so ubuntu thinks that the last time i booted was in the future (if this makes any sense) and fsck freaks
Code: Select alldone. Setting parameters of disc: (none). Setting preliminary keymap...done. Activating swap...done. Checking root file system...fsck from util-linux-ng 2.17.2
An automatic file system check (fsck) of the root filesystem failed. A manual fsck must be performed, then the system restarted. The fsck should be performed in maintenance mode with the root filesystem mounted in read-only mode. ... failed!
The root filesystem is currently mounted in read-only mode. A maintenance shell will now be started. After performing system maintenance, press CONTROL-D to terminate the maintenance shell and restart the system. ... (warning).
Give root password for maintenance (or type Control-D to continue): _
For now, I just don't know what I should to do next to my system has started to work again...
We have a server for which the root password had been lost, and there were no other user accounts set up. Yesterday evening I attempted to reset the root password by booting from the install CD and using VI to clear the root password in the passwd and shadow files. I then rebooted, and the system has halted with an 'FSCK failed. Please repair manually and reboot' error, with a prompt to 'Enter root password' below. But of course the root password isn't known (I had expected it to blank after editing the passwd and shadow files, but it doesn't work), so I have no way of logging on.
just start Ubuntu 9.04 said: File system chek failed a long is beging saved /var/long/fsck/checkfs if that location is writable Please repair the file systmen manually A maintenance shell will now be started Ctr+ D terminate this shell and resume system boot. Give root password for maintenance or type Control +D to continue. I did Ctr+D , and after login said , that can not find /home. I starte with the live cd:
I woke up this morning to the horror that the ext3 partition on my 1TB drive (the only partition on this drive), in an external USB drive case, was not readable. I did some poking around on Google for related issues, and found that what worked for many was to have fsck check, and possibly fix, some errors that have occurred on the partition. This I did with the following command:
I have bunch of partitions on my Debian server installation, so I was experimenting with partitions and saw that is one partition fails fsck on booting time, system waits for root password or CTRL+D key combination. The problem is that my Debian machine is headless and I use only SSH to it. So if fsck fails, I can't to login to SSH (off course, because it is not loaded at this time). So I need to go with monitor and keyboard to machine and press CTRL+D.One option is to disable disk checking at startup by changing fstab file. I don't like this option. Is there any possibility to auto continue booting Debian machine ?
I have a server that said a volume was dirty and to check it at reboot, so someone did a shutdown -rF now. Only problem is the other volumes are HUGE and it will take forever, which I cant have happen. The volume with the trouble is non-critical so I could take it offline and check it that way if i can get this to boot quickly. How can I do that if its going to auto check every volume on reboot now?
Today I did an update on my Debian 6.0.0 installation, which included a kernel update. I also did an Nvidia driver update, afterward. All well, until upon a third boot up an fsck check was forced (34 mounts). Some odd behavior ensued. At about 19% it exited the check, printed what appeared to be a load of inode numbers with error messages, and "froze" with the caps lock and num lock lights on the keyboard flashing.I did a couple of grub recovery modes, each which advanced a little further, and all is well again. However, it concerned me. Where in var/log do I find the file of that particular fsck activity?
I wanted to know how can I make fsck automatically fix HDD errors when it needs to check HDD during boot up and do not ask user for it . I found some of fsck related scripts in /etc/init/ and /etc/init.d/ but I don't know what to do with them.
I have a server with Debian on it that I regularly reboot after upgrades. Sometimes (on schedule) fsck will check a disk when the computer is booting. With the exception of sitting in front of the console to observe the fsck, how can I determine the difference between a problematic halt and an fsck (besides waiting out the fsck, hoping it is an fsck)?When I send the computer down to reboot, I will usually have a terminal window open pinging the computer so I know when it has come back up. My first thoughts drifted to fantasizing about hacking fsck to respond to pings with some special magic byte so you could tell via ping that a computer was fsck-ing, but I'm thinking there have got to be easier ways..
I have two ext3 lv's of 4GB and 10GB in my hda8 partition, and they are automounted by /dev/mapper/ in my /etc/mtab files in each of the four distros (Suse9.3, OpenSuse10.2, kubuntu7.04 and Debian Lenny 5.0.3). Since ext3 is a journalled fs I feel I ought to fsck their integrity every 3 months or so, however I don't know
a) whether they must be unmounted before running fsck, b) whether I should use a live CD such as knoppix to run the fsck command, and c) whether I can and/or should run fsck /dev/hda8, or whether I should somehow fsck each lv seperately?
I have pc/os linux 2009 installed and I recently got the following message while trying to boot up my system:
*checking root file system...fsck 1.41.4 (27-Jan-2009) dev/sda1 contains a file system with errors, check forced. /dev/sda1:Inodes that were part of a corrupted orphan linked list found. /dev/sda1:Unexpected inconsistency;run fsck manually. (i.e., without -a or -p options) fsck died with exit status 4
*An automatic file system check (fsck) of the root filesystem failed. A manual fsck must be performed, then the system restarted. The fsck should be performed in maintenance mode with the root filesystem mounted in read-only mode.
*The root filesystem is currently mounted in read-only mode. A maintenance shell will now be started. after performing system maintenance press Control-D to terminate the maintenance shell and restart the system.
Give root password for maintenance:
The problem is, when I enter my password I get an incorrect password prompt. How can I change my password so that a manual fsck can start? Why did this message error message appear in the first place?