General :: Eth0 Does Not Start (neither Startup Nor Ifup)

Jun 9, 2011

I'm having a weird problem, eth0 does not start neither on bootup nor ifup...not even issuing /etc/init.d/networking restart...i will show you some info just to check

[Code]...

View 6 Replies


ADVERTISEMENT

Networking :: IP Alias Fails When Using Ifup Eth0:1?

Aug 19, 2010

I having a problem with my network. I'm trying to assign an IP alias of eth0:1 to eth0. If I use ifup eth0:1 is fails and corrupts the network. Making the network useless. But if I just enter 'ifconfig eth0:1 10.1.1.51', it work fine? My scripts look like these:

Code:
:network-scripts; cat ifcfg-eth0
NAME="System eth0"
DEVICE=eth0
ONBOOT=yes

[Code].....

View 2 Replies View Related

Ubuntu Networking :: Connection To Network - Terminal: Ifup Eth0 Don't Fix Until Next Reboot

Mar 3, 2010

I have my ubuntu box hard wired into my network. It all works fine, until I reboot my ubuntu box. After reboot, it can no longer see the network. I have it set up with a static ip. Not sure that I set it up completely correctly but it works fine...when working.. To fix the problem, I enter terminal: ifup eth0 That fixes all know problems until next reboot. What do I need to do so that it will remember settings and automatically be hooked into the network at power up?

View 3 Replies View Related

Fedora Installation :: Error Message: [root@theraugafamily Network-scripts]# Ifup Eth0

Dec 23, 2010

I am in the process of settign up a home server under FC14. The installation recognized both NICs, one as Intel Gigabit and the other as a Realtek Semiconductor as it should be. But when trying to start eth0 (Realtek) I get the following error message:

[root@theraugafamily network-scripts]# ifup eth0
Active connection state: activating
Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/1
** (process:2296): WARNING **: _nm_object_get_property: Error getting 'State' for /org/freedesktop/NetworkManager/ActiveConnection/1: (19) Method "Get" with signature "ss" on interface "org.freedesktop.DBus.Properties" doesn't exist

state: unknown Error: Connection activation failed. Some more ifo the this NIC as it is of special type.It is a Viking PCI ADSL2+ Modem Card. I am quoting form the description "Being a gully integrated card, no external plug packs are required and cabling is simplified to just an ADSL line connection. The need to purchase an extra ethernet card is also eliminated, as yjis features is build into the card. The onboard Ethernet controller (RTL8139) makes the modem appear to the OS as a standard network card. Thus the Viking can be used with almost any modern O/S without the need for special drivers. This includes Windows, Linux, Solaris, xBSD, etc.." setting ACPI=off in GRUB.conf does not fix the issue

View 2 Replies View Related

OpenSUSE Network :: Networkmanager (eth0 And Wlan0) And Ifup Wifi Not Working After Monster Update?

Jul 13, 2011

I've had 11.4/KDE working pretty well on dual boot Asus G73SW for a few weeks now. Only issues were the FN-* functions that control keyboard lights and whatnot but no biggie since the essential worked.The last couple of days the update notification was indicating 1,201 updates to be made. Yeah it seemed extreme but I googled around and checked the forums and there was nothing related. I figured I might be missing some packages since I installed from the live KDE CD (still 1202 updates!!!???). So I updated. Big mistake!!!!! Ever since NetworkManager cannot connect to the internet, be it wired or wireless.

Initially it could not even see my home network but it picked it up after I removed the plasmoid from the panel and reinstalled it. However it doesn't respond when I click the network icon and still no connection.I managed to get eth0 working with ifup but not wifi. The last part of network manager log file is quoted below. I can send the whole thing to whoever is interested. I can't make sense of it but maybe someone on the forums can.

Code:
Jul 13 11:09:08 linux-yy10 NetworkManager[1649]: <info> NetworkManager (version 0.8.9997) is starting...

[code]....

View 9 Replies View Related

OpenSUSE Wireless :: RTL819SU Not Working With Ifup (needs Ifup-dhcp First)

Sep 29, 2010

After spending quite some time on this, I have narrowed it down to:

Adapter works OK with NetworkManager
Adapter works OK with ifup if I run iwconfig after ifup has finished

It eppears to be linked to another thread Probl me de r seau wifi / Network manager in that dhcp needs to be running. (So it may be a 'feature' of RTL819 adaptors) So I've finally worked out that I need to start dhcp first.

[Code]...

View 2 Replies View Related

Ubuntu Networking :: Get "wlan0" And "eth0" Interfaces To Start At Startup?

Jul 3, 2010

Quick question guys and gals: How do I get "wlan0" and "eth0" interfaces to start at startup as as well as for "dhclient" to obtain an IP address automatically for "eth0?"

View 7 Replies View Related

General :: Eth0 Failed At Startup FC2, Intermittent Web Access After Tweeking Network Config

Jul 30, 2011

I am using FC 2, and I get 'eth0 failed' during startup.

I am configured for DHCP

device is 'inactive' under network device control after reboot

click 'activate', sometimes I can surf, others not.

When I can't get online, sometimes deactivating and reactivating works.

edited connection to 'activate device when computer starts'

eth0 still fails at start-up, and device is inactive.

I am supposed to use FC2 for my schoolwork

View 14 Replies View Related

General :: Eth0 Wlan0 - Net.lo Doesn't Start

Jun 25, 2010

In an attempt to set up wireless so I could connect to the university network, which I think I probably should have just downloaded network manager or something but I didn't, I tried to put things in /etc/conf.d/net and some other places and I am afraid I'm not sure exactly what (and I have learned my lesson! I will pay attention to what I am doing so I can undo it next time I mess around with stuff!)

Anyway, the long and the short of it is now, when the computer is starting up and its doing the init stuff net.lo doesn't start. Later try and start net.lo or net.eth0 you get told "not enough arguments"

View 3 Replies View Related

General :: Ifup -a Is Not Working

Mar 1, 2010

So I thought I was getting the hang of networking stuff, but, apparently not. Anyhoo, I have a startup script (very basic one liner)ifup -a Reading the man page for ifup it says this should bring up all devices listed in interfaces file (so contained in there I have):After starting my machine I run ifconfig which returns no output.If I do ifup eth0 I get: ifup: interface eth0 already configured.So finally, if I run dhcpcd this brings up my nic. If I then do ifdown -a and kill the dhcpcd process and then manually type ifup -a, it all magically comes back.Would someone explain what step I am missing in the process to have all my cards startup as part of the boot process?

View 11 Replies View Related

Networking :: Detect If Eth0 Has Been Enabled Properly On Startup?

Mar 16, 2011

building a box with no other interface than tcp/ip. now in case something goes wrong when changing the /etc/network/interfaces via ftp and when rebooting the system cannot bring the interface up I would like to be able to detect it and replace the interfaces file with a default one stored on the system.

View 1 Replies View Related

General :: Stop And Restart Ethernet Connection Ubuntu 9.10 - Ignoring Unknown Interface Eth0=eth0

Mar 8, 2010

If I uncheck and recheck "Enable Networking" in the Network Manager Applet 0.7.996 I would expect the wired network to disconnect (which it does) and reconnect (which it does NOT). So I tried sudo ifdown eth0 and got

Quote:

Ignoring unknown interface eth0=eth0.

ifconfig tells me

Quote:

eth0 Link encap:Ethernet HWaddr 00:25:64:e8:18:2c
inet addr:192.168.0.112 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::225:64ff:fee8:182c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

[code]....

so I am at a loss. How do I stop and restart the network interface short of rebooting the machine?

View 9 Replies View Related

General :: Force Server To Open Connections Via Eth0:0 Not Eth0?

Mar 3, 2010

I got two IP's in my dedicated server. Both are external IP's. I would like to make connections using 2nd IP address under eth0:0 interface. For example: when using "lynx whatismyip.com" should display my 2nd IP. How to do this using iptables ?

View 1 Replies View Related

Ubuntu :: Start Synergy On Startup Wont Start Automatically On Server

Oct 13, 2010

Im trying to run synergy on startup. This works fine on the client, but it wont start automatically on the server. I put this line in an entry in startup applications:

[code]...

but still no dice.

View 9 Replies View Related

Ubuntu Servers :: 10.10 - Setup Eth0 With Subdevice Eth0.0 And Eth0.99 To Come Up At Boot

Apr 22, 2011

im trying to setup eth0 with subdevice eth0.0 and eth0.99 to come up at boot

eth0 is dhcp clint
eth0:0 is static ip
eth0.99 is 802.1q vlan interface
/etc/network/interfaces
Code:
auto lo
[Code]....

View 1 Replies View Related

Software :: Samba Refuses To Start On Startup - But Will Start Manually

Apr 14, 2009

I just moved my / from sda1 to an ide drive, hde1. i dont see how this could have caused any of these issues, but it did.

First my network card failed to start. i added a line in my rc.local file (where i put all of my additional programs, etc i want to start):/etc/rc.d/rc.inet1

The above now starts my network card with my static ip configured. dhcpcd also worked but i wanted this static.

Now samba will not start. i have the following line in my rc.local: /etc/rc.d/init.d/samba start

This used to work just fine. at first i thought that samba may be trying to start before my network card gets an ip, but the line is *after* the network startup line. just to make sure, i made an additional script called startsamba which contained a sleep 60 followed by samba start, to delay the startup of samba even further.

The message samba reports is very vague, something like failed - core dumped. most of the core dump log is garbage characters, but here is the beginning which seems like it might contain some info:

Code:

ERROR: Can't log to stdout (-S) unless daemon is in foreground (-F) or interactive (-i) after the system starts, i can drop to a console and type "/etc/rc.d/init.d/samba start" and the service starts just fine. i've also tried starting samba manually with "smbd -d" which also produces the core dump when started from rc.local, but not when started from a console after startup.

View 8 Replies View Related

General :: Getting Eth0 To Come Up - Eth0 Seems To Have Vanished From Computer

Mar 2, 2011

I'm not sure how long ago this happened but eth0 seems to have vanished from my computer. wlan0 works fine and when I plug into the switch there is carrier detect.

Code:
21:35:43 ~:$ ifconfig eth0 up eth0: ERROR while getting interface flags: No such device
21:55:49 ~:$ lspci 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 07:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300 After that i have no idea where to search for problems next, any ideas would be greatly appriciated (can't spell) ubuntu 10.10

View 11 Replies View Related

Fedora Networking :: Can't Start Eth0

Jul 9, 2010

I can't start eth0 and have read thru many of the threads on this and can't figure it out. What does this message mean?

Code:
[jeff@chladni ~]$ ifup eth0
Active connection state: activating
Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/13

[Code]....

View 1 Replies View Related

OpenSUSE Network :: Get Eth0 To Start Up At Boot Up

Jun 22, 2010

My eth0 is not up everytime at boot up. I will need to <service network restart> to get it up.

I have used yast's /etc/sysconfig editor to set /etc/sysconfig/network/config -> MANDATORY_DEVICES to eth0

And I have also added <alias eth0 e1000e> to /etc/modprobe.conf.local

And also set eth0 device to activate device at boot time using Network Card Setup.

But eth0 is still not starting up at boot time. What should I do to get it up at boot time?

I'm using openSUSE 10.3. And no, I'm am unable to move to 11.2

View 1 Replies View Related

Networking :: Auto Start Eth0 In Fedora 14?

Jan 6, 2011

my eth0 connection is not automatically connected when fedora starts. I checked " activate device when windows starts" in network configuration. still it is not auto connecting and after connection the network icon is not changing to connected status although it is connected.

View 4 Replies View Related

Fedora Networking :: The Eth0 Device Does Not Start On Boot?

Mar 29, 2010

I just finished installing Fedora 12 on a rack mount server. I was modifying the /etc/sysconfig/network-scripts/ifcfg-eth0 file to use a static IP address, but now nothing works. The device does not boot on start up or anything.Currently, ifcfg-eth0 looks like:

Quote:

DEVICE=eth0
ONBOOT=yes
BOOTPROTO=none[code].....

The eth0 device does not start on boot; the server does not get the IP address, is not reachable over the network, and will not connect to the internet....

View 2 Replies View Related

Slackware :: Configure System To Start Wlan0 Instead Of Eth0?

Nov 29, 2010

I'm running Slackware-13.1 on my laptop. Connection to my network is via wlan0, a cable in most cases not pluged in.When starting the system the first attempt to configure the network is via eth0, which ends with dhcpcd timing out since there is no cable pluged in. Afterwards wlan0 is set up properly.

I have installed ifplugd, which is a daemon who connects to ethernet only if a cable is connected. With Gentoo this works out of the box. With Slackware ifplugd is started after rc.inet1 (probably). So the the system still tries to connect via ethernet before connecting to the wireless network.

I have also installed wicd.How can I manage that wlan0 is prefered over eth0?I noticed that neither wicd nor ifplugd belong to the default full installation of Slackware and therefore assume, there must be a solution which meets my requirements without even one of both programs.The laptop is only used at home. Wireless connection is normaly used. I need eth0 only in a case of emergency.

View 2 Replies View Related

Ubuntu Servers :: Eth0 Doesn't Start After Interfaces Modified

Aug 12, 2010

I have three VMs (VMWare Server 2) all running Ubuntu Server 10.04. (one I asked to be a samba share from the outset, the others are blank server installs, no pre-config)

I follow the layout in the community documentation regarding setting up firewall rules through iptables. I.e. I create a file called iptables.rules and place it in /etc. I then modify the /etc/network/interfaces file to look like this:

Code:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo

[Code].....

However this third one I have reinstalled Ubuntu 3 times now, and every time as soon as I modify the /etc/network/interfaces file, eth0 fails to start up (is not visible in ifconfig, only the loopback adapter), and no networking works.

I have tried reducing the iptables.rules file (which is a carbon copy across all machines anyway) to a basic accept all rule, and it still doesn't like it. As soon as I remove those two extra lines in the interfaces file, the network starts up no problems and eth0 is there.

View 2 Replies View Related

Networking :: Eth0 Does Not Work After Shutdown/start But Works When Restart

Sep 13, 2010

When I shutdown computer and start it up, eth0 doesn't seem to show up (though lspci sees ethernet card and modules are loaded). When i reboot (which is exactly the same, in my opinion), it works good. I'm using Sabayon GNU/Linux, Gnome Network Manager applet.

>uname -srm

Linux 2.6.34-sabayon x86_64

>sudo lspci | grep Ethernet

00:19.0 Ethernet controller: Intel Corporation 82578DC Gigabit Network Connection (rev 05)

View 2 Replies View Related

Fedora Installation :: System Does Not Connects Automatically When Start's To Eth0 - Changed Host's Name

Mar 26, 2009

now my system does not connects automatically when fedora start's to eth0 i have to connect it manually by pull down menu in the beginning hostnname was dbe272b22.dslam-172-17-161-245-0532-474.dsl.cantv.net i do not remember if the last part ".cantv.net" was there.... i changed hostname "dbe272b22.dslam-172-17-161-245-0532-474.dsl" maybe ending with ".cantv.net" with system-config-network for hostname "edicta" i modified /etc/hosts by hand twice, now do not remember what i did exacly but here you can see /etc/hosts

[Code]....

View 2 Replies View Related

Ubuntu :: Program Irxevent Start Automatic When The System Start Irxevent On Startup?

May 27, 2010

I install lirc and want to prgram irxevent start automatic when the system start

Code:
System->Preferences->Startup Applications
Add an item,but that not works every time,means sometimes cannot work.

View 2 Replies View Related

General :: Startup - Automate "sudo Chmod A+r /dev/usb/hiddev0" Upon Start?

Oct 22, 2010

I have a footpedal and fortunately there is a software for using it under linux (see [URL]). The author of that software already solved an issue for me (see issues there), but there is no option to ask simpler questions.

Unfortunately prior to use the software I have to change the device permission each time I start linux. How could I change that to be done automatically at startup?

View 4 Replies View Related

Ubuntu :: MPD Won't Start On Startup?

Apr 21, 2010

I've added mpd to System->Preferences->Startup Applications several times and it always just disappears and of course isn't started. I have used both mpd and /usr/bin/mpd as the command. I have done a log search as follows:

Code:
sudo find /var/log -type f -mtime -5 -exec grep -i -e 'mpd' '{}' +

and nothing significant was found, e.g. an error message indicating that the mpd startup command was removed.

View 9 Replies View Related

Ubuntu :: Getting Conky To Start At Startup?

Apr 6, 2010

As the title implies, I have fluxbox and conky running in Karmic. The problem is getting conky to start at startup. Below is my ~/.fluxbox/startup file. I have searched and tried everything I have found to get it to work. Conky works beautifully when I run it manually. Anyway, here is my startup file:

Code:
#!/bin/sh
xmodmap "/home/doug/.Xmodmap"
unclutter -idle 2 &
conky &
exec fluxbox -log "/home/doug/.fluxbox/log"

Lines added before and after the conky line run perfectly. Unclutter runs, but no conky.

View 3 Replies View Related

Ubuntu :: How Do Make Anything Start On Startup

Sep 4, 2010

How do I make something start on boot? I remember there being a command.. nano something, can anyone tell me?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved