i would like install tahoma on fedora 14 i create a folder .fonts name in copied my tahoma font in this folder and run this command fc-cache -f in my terminall.but i cant use in this font yet,how should i install fonts in fedora 14?
Most of my work happens in a terminal, so I need a clear, readable font. I've settled a while ago on Terminus [URL]..., which works wonders for me. I added XTerm*faceName : Terminus in my ~/.Xdefaults, and I do get the Terminus font. Unfortunately, a lot of Unicode glyphs are missing (mathematical symbols, greek and hebrew letters), displaying as little square blocks instead.
If I remove the faceName entry, the default configuration seems able to display most of the glyphs (including math, greek, hebrew, runic, and whatever else), but the default font is much harder to read.
A google search hints that it should be possible to use Terminus as the default font, and fallback to (an)other one(s) for missing glyphs, but provides no further explanation. I've seen documentation that recommends Bitstream Vera Sans as a fallback, but it lacks the glyphs I need too; I don't know how to identify the default font used by xterm either, I had a look at /usr/share/X11/app-defaults/XTerm, but all I can find are generic references to old pre-fontconfig font names.
Using Gentoo Linux, fontconfig and xterm are up to date, USEs trutype and unicode enabled, X.Org server 1.6.
Edit: I alternate between Ratpoison, Awesome and XMonad, without a desktop environment.
Actually I want to log a bug but I don't really know what package to log it against. The problem is that by default Pango is choosing the AR PL UMing CN as the font to render Japanese text when the current font doesn't have Japanese glyphs. But AR PL UMing CN is a Chinese font, so Chinese glyphs for kanji characters (e.g., 覚) are displayed. This is jarring and confusing for Japanese readers.
This situation mostly arises when you have mixed English and Japanese text. Some applications (for instance Firefox) will allow you to select a font for Asian text. Thus if the text contains only Asian characters it will use the font you select, rather than what Pango would have selected. But if it is a mix of English and Japanese, you end up with the wrong glyphs.
Other environments (like gnome-terminal, or a gedit) have difficulties as well. Since the primary interface requires mono spaced roman characters you run into difficulty selecting fonts. Most Japanese fonts only have proportional roman characters. This means that if use a nice roman font and use Japanese text (for instance file names), you end up with Chinese glyphs. What I want is a mechanism that will work across all of Gnome for selecting the font I want to use for Chinese characters. That way I can choose either Japanese or Chinese glyphs.
I realize this is low priority. It only bugs me a little, but many of my Japanese colleagues are put off from using Ubuntu because they are confused by the Chinese glyphs that pop up on my screen from time to time. As I said, I'd like to file a bug, but I'm not sure against what package...
In all previous versions of KDE I had Console8x16 set as KDE font for all cases (Settings->Appearance->Fonts). After tonight upgrade, this (only!) font is not working. I can see it in font manager, I can set it in ...Appearance->Fonts, but actually remains default font. Two of about 30 attempts somehow (can not reproduce) succeeded to set "console 12" font, but it disappeared after restart.
1. What can be the problem in 4.4? 2. In /usr/share/fonts tere are 3 files named console8x16.pcf, console8x8.pcf and console9x15.pcf, but in the font list in Appearance->Fonts I can see only 2 - one named "Console" (seems to be 8x16 and "console" (8x8). File 9x15 does not appear at all. Why?
Last results of attempts: cannot use console font in part of areas, while part works OK. For example: kdevelop editor, kmail message body text works OK. But kmail other parts - does not. The most interesting is that although setting the kmail body message text to console displays the message body text correctly (with console font), but the example message in "Configure kmail" dialogue "The Quick Brown Fox Jumps Over The Lazy Dog" is displayed in the default font, as if there is no console font!
I am seeing a weird error in a font display. I see a small question mark next to a font that I am using as a simple graphic. Does this mean that some function call in xlib is being passed an invalid paramter?
I don't know too much about the licensing issues surrounding fonts, but I would like to install Helvetica on my machine for my own personal use. I haven't been able to find a whole lot about this on Google.There are a lot of Helvetica alternatives out there, but I want Helvetica itself.
i am trying to read some newspapers online through firefox and opera in my rhel 5 machine. My language is tamil. By default it will not support that. But i have downloaded the fonts. i put that *.ttf fonts in /usr/share/X11/fonts directory. But its not working? I tried by putting in /etc/fonts directory too. But still problem persists
We are having problems opening some PDF files: get error and whole document is unreadable using acrobat 9.x on karmic. "Cannot find or create the font 'TimesNewRoman,Bold'.Some characters may not display or print correctly." I also ran upgrade from ubuntu software center and retried but same problem.
I have a pdf file (nasm documentation) that used to be displayed perfectly with xpdf, but now all code example lines remain blank. On the terminal I get repeated lines such as:
Quote: Error: Couldn't create a font for 'Courier Bold' Error: Couldn't create a font for 'Courier'
I tried to figure out the problem... the same problem occurs with both evince and okular. However it does not occur when opening the same file under root (tested with xpdf), so it seems to be some permission problem. I tried searching on the error message but couldn't find a working solution.
1. How to use the the font in the application? Any code example? 2. How to install the font for linux? 3. How to make the installed font as the system default font? 4. How font/text is rendered in linux? Any inforamation about the font system in linux?
I installed slack 13 from disk 1, and then went ahead and installed the missing sets using slapt-get (t,tcl,x,xap and y). I skipped the kde and kdei sets. When I start xfce, the fonts are all messed up as shown in the attachment.
I am pure newbie with Ubuntu, Good riddance from Windows 7. I am no way near to anything related to programming yet I wanted to see this world of freeware. Uploaded with ImageShack.us Please suggest good font package and how to install them and where to get them. Also please let me know where to find all the treasure to make my desktop more funky and how to install them using terminal or if there is easier way.
I managed to install LibreOffice. I've only a little experience with Ubuntu and none at all with Debian.
My 1st project is relatively simple. Pro Screenwriting software can be kinda costly, a hundred & change, at least.
With expanding contests, YouTube & the like, writers interest has been growing; and these day most submissions are pdf not paper. (The BBC Writersroom is a fantastic resource, and even allows unsolicited submissions). [URL] ....
Some years ago, Alan Baird got an award from Sun Micro for developing a set of free format templates called Screenwright for Open Office. Including both US & A4, as well as radio, sitcom, theatre and movies; these have now been ported to Libre Office under Creative Commons usage. [URL] ....
I believe these should work well and fairly fast on the new Pi, as most spec scripts are vastly more white space than word count.
There is a minor problem tho, which first came up with 'New Courier' on Windows machines. The 'page per minute' rule is still important enough that the different line/page length spacing of 'Courier-like' fonts is unacceptable in a submission.
The standard Courier font can be had from [URL] ....
That font set is a zip file which should be extracted and then the 3 fonts are to be dragged into the Windows fonts directory.
So how exactly do I do that with Rasperian Wheezy? Do I extract on the Pi or on the windows machine? Are fonts like most documents, readable on any distro, or do they need to be converted somehow?
I'm running a Debian Wheezy system. There are a lot of characters I want to use from the U+1F*** set of characters. But when I use them or look them up in the character map, all I see is the square with the code inside. Is there some font package I can install from the repository that has better support for these characters?
E.g., when I am instant messaging my girlfriend, I like to use the HEAVY BLACK HEART character (❤, U+2764). But there are a whole bunch of other "romantic" characters that are listed but not actually displaying for me, like the KISS MARK (U+1F48B), which I would like to use. These characters apparently show up on her system, which is an android phone.
I am pretty new to GNU/Linux. I use Mint but want to use Debian. The problem is, Debian has worse font smoothing. Ubuntu's smoothing is great! Is there any possibility to simply install any package on Debian stable to make Debian's font smoothing exactly as it is in Ubuntu?
I am installing from the scratch a 11.3 on a PC on which previously 11.1 did run flawlessly. (Athlon 3700 with 3GB ram and Asrock socket 939 mainboard. Graphics is Nvidia. The installation comes every time up to 90% when it arrives at "font initialization). No error message is displayed. The little "cursor wheel" is still turning but else, there is no activity.
DVD from an sha1 checked and MD5 doublechecked download was burned with lowest speed in K3b and verified by the same program post burn, with full success of every verification. Tried to change DVD reader but does not change the result. Runs speedy up to that step.
Running Opensuse 11.4 (but had same problem on 11.3). During startup and shutdown, the text messages are displayed using a very large font (characters are > 1 cm high). How can I specify the font and font size it uses ? Presumably it is doing a bad job of detecting the monitor (its a Samsung SyncMaster P2250). Which config file contains a suitable entry, and what is the entry ?
I have a laptop with a 15" screen and a resolution of 1920 X 1200 and a 22" external monitor running at 1680 X 1050. This means the laptop runs with a dpi of 150 and the monitor runs at a dpi of 90. Is there anyway to get the fonts on the laptop to be readable while keeping the fonts on the monitor from being gigantic?
We talk about 12pt, 14pt font sizes. Do those numbers represent physical size in some unit or number of pixels? I guess it is the former, because same font size looks different for different DPI values, but in what unit? Also a relevant question: does browsers like firefox and chromium use different system of font sizes, because to get the same physical size, I alwasy need to set larger values in firefox than in other applications. Setting dpi and resolution values using about:config has no effect.
It says in the help for printfont that the font NAME (i.e., the typeface) is ignored (which seems stupid, but at least they tell you that) but the SIZE is not. The part about the size not being ignored seems to be a lie. More importantly, is there a way to change the output typeface to something else?