General :: Configure Machine To Load Specific Modules At Startup?

May 9, 2010

How do I configure my machine to load specific modules at startup.

View 1 Replies


ADVERTISEMENT

Debian Installation :: Failed To Load Kernel Modules On Startup

Sep 15, 2015

I have this kind of error:

Code: Select allr@prime:~$ systemctl status systemd-modules-load.service
● systemd-modules-load.service - Load Kernel Modules
   Loaded: loaded (/lib/systemd/system/systemd-modules-load.service; static)
   Active: failed (Result: exit-code) since Чтв 2015-08-20 08:07:38 EEST; 13min ago
     Docs: man:systemd-modules-load.service(8)
           man:modules-load.d(5)
  Process: 150 ExecStart=/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)

[Code] .....

View 0 Replies View Related

General :: FATAL: Could Not Load /lib/modules/2.6.18-194.17.1.el5.028stab070.7PAE/modules.dep: No Such File Or Directory

Mar 6, 2011

I want set up VPN on my VPS but when i try to turn on tun/tap i see:

:/lib/modules# modprobe tun
FATAL: Could not load /lib/modules/2.6.18-194.17.1.el5.028stab070.7PAE/modules.dep: No such file or directory
os : debian 5
(folder lib/modules is empty)

View 1 Replies View Related

General :: Rc.modules Not Loading Modules At Startup?

May 11, 2010

I've been trying to load my pcmcia network card driver "xirc2ps_cs" at startup with no success. I have added "modprobe xirc2ps_cs" to the rc.modules file but it doesn't load at startup. Curiously, though, if I execute rc.modules AFTER the machine has booted it will load the modules just fine. Just not during the boot up process. Thinking that hotstart might have been causing problems I've disabled hotstart (chmod -x) temporarilly to remove it from the picture, but there was no change.

View 5 Replies View Related

Ubuntu Installation :: Boot Error "modprobe: FATAL Could Not Load /lib/modules 2.6.35-22 Generic Modules No Such File Or Directory"

Apr 14, 2011

Tonight I installed ubuntu 10.10 (32 bit) on an external usb harddrive with a dvd I burned and I used my older desktop. I disconnected all internal and external drives first so everything had to be put on the usb drive I selected (only option available). I used the option to load extra software, use the entire hard drive, and let the software do it's thing. I basically had no options where to put things and it didn't have much choice.

When I boot the usb drive on my laptop (win 7 64 bit) by telling the bios to boot to it first... I get an error: modprobe: FATAL Could not load /lib/modules 2.6.35-22 generic modules No such file or directory. This message appears twice and then it does boot into ubuntu and seems to work fine. I'm new to this OS so that is an uneducated guess but the things I have done seem to be working. So exactly what is this error referring too? Is there a way to fix the problem or do I just ignore it.

View 9 Replies View Related

General :: How To Configure Serial Port Of Virtual Machine With Host Machine?

Jul 29, 2009

I successfully installed the virtual box on my fedora 8 system, and also created a virtual machine with windows xp OS, it works nicely, I try to configure the serial port of my virtual machine and try to configure the path for the port "screen shot are attached" it gives me the error message also the "screen shot are attached" for your review.Is kind of mistake is going on during the path setting, and how to set the path for configuring the serial port of my virtual machine so that I can use the hyper terminal tool of windows.

View 4 Replies View Related

General :: Configure Sendmail To Route Mail To Specific Hosts?

May 8, 2010

configure sendmail to route mail to specific hosts?

View 2 Replies View Related

General :: Mount A Specific Directory On Server To A Local Windows Machine?

Jan 20, 2011

I have a directory on my server at /home/dave/www/images/site (ext3) which I want to mount directly to my Windows computer so that I can transfer data easily via command line tool. Is that something possible?

View 4 Replies View Related

General :: Load Ubuntu On A Machine With/without OS

May 12, 2011

I have a HP tx 1000 that a friend of mine gave me. The only problem is that he formatted the HD without a back up or recovery CD.The machine is a HP tx 1000. On start up it asks for the Windows installation disk.....blah, blah, blah. When I try to load the Live Disk it gives me an error about recently added software.The problem is that I cannot boot to the disk because the Windows firmware is in the way.

View 14 Replies View Related

CentOS 5 :: FATAL: Could Not Load /lib/modules?

Aug 30, 2010

i try update new kernel and got this error when i try to actived tun/tap

Quote:
-bash-3.2# modprobe tun
FATAL: Could not load /lib/modules/2.6.18-164.15.1.el5.028stab068.9PAE/modules.dep: No such

[code]....

View 2 Replies View Related

General :: Make A Script Run Upon Startup Of The Machine?

Jun 22, 2010

I want to run /home/myuser/go.py How do I make that run in the background, everytime my linux machine boots up?

View 3 Replies View Related

Fedora :: Load Kernel Modules At Boot ?

Jul 4, 2009

How do I get modules in the Kernel to load automatically at boottime? I''m specifically trying to get i810fb to load during the boot process. In Ubuntu, I just had to edit a file and update my initramfs. How do I do this in Fedora?

View 5 Replies View Related

OpenSUSE :: VMware 6.5 Unable To Load Modules?

Mar 16, 2010

Yet another problem I have. Suse is taking a while to learn but I swear I'm getting there. Can pritty much do everything by CLI now. I'm trying to run VMware Workstation 6.5 on OpenSuse 11.2, Gnome. I had it running fine but then needed to do a system re-install and upon installation this time I get a error saying it's is Unable To Build Kernel Module and reffers me to a error log. The error log says:

Code:
Mar 14 22:07:51.420: app| Log for VMware Workstation pid=6136 version=6.5.0 build=build-118166 option=Release

[code]....

View 1 Replies View Related

Debian :: How To Reset Kernel Modules Load To Default

Aug 21, 2010

trying to install the wi-fi drivers for RaLink rt3090. How can I reset the kernel modules to default so I can try again?

View 3 Replies View Related

Debian Configuration :: Kernel Modules Won't Load Anymore

Jul 7, 2015

After a hiatus I found my machine to be down, but upon turning it on I get significant errors and dropped into emergency mode (see below). This machine wasn't very up-to-date to begin with, so I'm having difficulty determining the order in which to proceed. A couple naive checks and updates on my part are not working. The file system appears to be intact enough to "cd" around and "ls" to see that my files are all (seemingly) there. But the kernel modules aren't loading which is, you know, a problem.

The state I find it in is that it will begin booting to Linux 3.2 (which I know is no longer supported in testing, see below where I tried to update to 3.16), but fails quickly and puts me into emergency mode

Loading, please wait...
megasas: INIT adapter done
systemd[1]: Failed to insert module 'autofs4'
systemd[1]: Failed to open /dev/autofs: No such file or directory
systemd[1]: Failed to initialize automounter: No such file or directory
systemd[1]: Failed to set up automount Arbitrary Executable File Formats File System Automount Point.

...Then several drives show up as clean....

Running "journalctl -xb" shows that it can't mount the module even though it's there on the disk:
... systemd-modules-load[259]: could not open moddep file '/lib/modules/3.2.0-4-amd64/modules.dep.bin'
... systemd-modules-load[259]: Failed to lookup alias 'firewire-sbp2': Function not implemented
... systemd-modules-load[259]: could not open modeep file '/lib/modules/3.2.0-4-amd64/modules.dep.bin'
... systemd-modules-load[259]: Failed to lookup alias 'loop': Function not implemented

And yet, if I 'ls' that modules.dep.bin file, it's right where it's supposed to be, for the appropriate architecture and everything.

After that (in the journalctl output), it shows several things start up, but systemd-modules-load.service fails:
.. systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
.. systemd[1]: systemd-modules-load.service: Failed to start Load Kernel Modules

...and lots of things fail from systemd-udevd: failed to execute '/lib/udev/socket:@/org/freedesktop/hal/udev_ev_event': No such file directory.

"uname -a" shows
Linux <my hostname> 3.2.0-4-amd64 #1 SMP Debian 3.2.32-1 x86_64 GNU/Linux

I tried updating via apt to the Linux 3.16.0 kernel, but grub wasn't finding it in a way that effects the boot process, and no appropriate "vmlinuz-" file appears with the others on the boot partition. So, I tried switching to grub2 but the update-grub command produces many errors.... For now, grub2 still (attempts to) load the old kernel (3.2) with the same results as I was getting with the old grub-legacy.

Regarding the module-loading features, running "lsmod" shows about 30 lines:

Module
ext3
mbcache
jbd
dm_mod
usbhid
hid

[Code] ....

...I'm at the limit of what I know to check and/or try.

View 1 Replies View Related

OpenSUSE Hardware :: Updated ALSA - Now Modules Won't Load

Dec 26, 2009

I updated alsa to the latest 1.0.22, however now the alsa modules refuse to load! When I do

Code:

rcalsasound restart

I get:

Starting sound driver: hda-intelWARNING: Error inserting snd_timer (/lib/modules/2.6.31.5-0.1-desktop/updates/alsa/acore/snd-timer.ko): Invalid module format
WARNING: Error inserting snd_pcm (/lib/modules/2.6.31.5-0.1-desktop/updates/alsa/acore/snd-pcm.ko): Invalid module format

[code]....

My audio codec is IDT 92HD81B1C5 and the problem is I can't get the mic to work properly with the stock alsa.

View 9 Replies View Related

Ubuntu Installation :: How To Load Additional Modules (Server)

Sep 17, 2010

I've been playing with some intel server board and they provide a type of fakeraid which is called Embedded Server Raid Technology 2. Since Intel officially support RHEL and SLES on their servers, they provide drivers/modules for this fake raid (which supports raid 0, 1, 5 and 10). I have installed RHEL before on these severs and redhat's installer has the ability to load additional modules (via a boot command linux dd).

While intel doesn't provide the modules for other operating systems, they provide a library where people can build their own module for their kernel. I managed to build this module called 'megasr' (for now I've built it for kernel 2.6.32-24-generic which is my testbed at the moment but I would eventually build it for box i386 and amd64 for both server and desktop versions) and load it on a system which is installed on a single drive.

We are able to load it successfully and see the raid 5 as a single volume and access it (partition, format and copy data to it) and all its functions (work in degraded mode, rebuild, etc) work fine but my main goal is to actually install such volume as my main boot volume (similar to how its possible with RHEL or SLES). Is this possible? Load additional modules during the installation that will be present after the installation is finished?

View 1 Replies View Related

Ubuntu Servers :: Cannot Load /usr/lib/apache2/modules/libphp5.so

Nov 30, 2010

My apache and wordpress were running fine till this morning. I ran updates via webmin,though I wasn't sure what those updates were for.

Then when I tried to access mysite.com, index.php downloads instead of opening.

I tried some troubleshooting and followed a form where it was advised to enable mod php5, so I did a2enmod php5 and tried to restart apache. Since I get this error Cannot load /usr/lib/apache2/modules/libphp5.so into server.

View 1 Replies View Related

Hardware :: Can't Load ALSA Modules - No Sound / Solution For This?

May 24, 2009

Code...

The problem is to get sound out of my PC. I've executed alsaconf few times and every time it generates following errors to /var/log/messages code...

View 1 Replies View Related

Slackware :: Dvb / Video Modules Won't Load On Current - Resolve This?

Mar 3, 2010

Tried to get my VDR working again, but the dvb modules refuse to load code...

View 7 Replies View Related

General :: How To Configure A Windows Machine For User

May 12, 2011

How do you configure a Windows (preferably latest version) machine for a Linux power user, so that s/he can get most out of it?if all you have to add is a one-liner, your answer will be converted to a comment.

View 7 Replies View Related

General :: Configure Machine To Send Mail?

Mar 16, 2011

How do i configure my linux machine to send mail. I have two server out of which one is configured to send mails. However The other is still not sending mails .I have installed sendmail rpms and modified
sendmail.mc file to include following parameter.

[Code]...

View 4 Replies View Related

Ubuntu Installation :: Load The Same Modules In The Upgraded 9.04 As Are Loaded By The Live CD?

May 5, 2010

I was using v 8.10. It came to its end of life and I felt compelled to upgrade. I upgraded to v 9.04. All seemed well, but then I discovered that I had no sound. As a test, I booted up with the v 9.04 CD, using it as a live CD. I had sound, so it seems as though it should be possible for me to have sound from my upgraded v 9.04 too, provided I can make the necessary changes to it.

When using the live CD and opening the volume control, I get as the listed device "HDA ATI SB (Alsa mixer)". That doesn't appear when I open the volume control using my upgraded v 9.04. Instead, it says "Playback: Null Output (PulseAudio mixer)". Also, when I check for loaded modules when using the live CD, I get many with snd in their name, but nary a one when using the upgraded 9.04.

Is there some simple way for me to load the same modules in the upgraded 9.04 as are loaded by the live CD? I tried to figure out the answer to this by reading other threads, but was simply overwhelmed by the volume of material and often wasn't sure to which version of Ubuntu it applied.

View 1 Replies View Related

Debian :: Determine And Remove Modules Load At Kernel Boot?

Jul 17, 2009

I was wondering how can I determine among the modules loaded at boot which of them are really necessary and which are not, in order to reduce the boot process time and have a more "elegant" system start.

I know this theme is a little bit of complicated because it depends of the user's point of view and demand a high knowledge of which things are happening in your system but I need somewhere to start improving the performance of my debian system.

View 3 Replies View Related

Hardware :: [Udev] Load-modules.sh Error When Plugging In Camera / Fix It?

May 24, 2010

When I plug in my camera via usb I see this error

Code:
load-modules.sh: 'usb:v22B8p2B44d0001dcFFdscFFdp00icFFiscFFipFF' is not a valid module or alias name
This is happening on multiple machines. My udev version is 153. I don't think this is a permissioning issue because I've tried playing around with the udev rules/

View 5 Replies View Related

General :: Configure KDE Konsole To Open New Shells On A Different Machine?

Mar 11, 2010

How to configure the KDE Konsole that when I press on a "new tab" button, the new shell would open on another machine (thorugh ssh), and not on the current one?

View 1 Replies View Related

General :: Configure Load Balancer To Create A 4 Server Web Farm

Feb 8, 2011

How to configure load balancer to create a 4 server web farm.

View 1 Replies View Related

Fedora :: Check If Machine Have The Kernel-modules To Mount NTFS?

Dec 14, 2009

how can I check if my machine have the kernel-modules to mount NTFS? Running FC12

View 2 Replies View Related

General :: Configure A Samba Server Using A Machine With Fedora And A WindowsXP

May 24, 2010

how can i configure a samba server?. im using a machine with fedora and a windowsXP machine.

View 7 Replies View Related

General :: Automatically Run A Virtual Machine (made By Vmware In Fedora OS) At Startup In Fullscreen?

Sep 11, 2010

I am an administrator of a student lab with 20 PCs. I was thinking of a way to protect those machines in the long run with the presence of some students with destructive behaviour. The most suitable solution to install a Linux OS and use virtual machines to load Microsoft OS. This way once the OS fails I can simply replace the VM with a clone that was previously made.

The point is that most students have no experience with Linux, that's why I need to load the Virtual machine automatically at login and in full-screen view so that The startup process ends up in Microsoft OS through the virtual machine (VMWare based) in Linux platform.

update : I'm using Fedora13 Linux distribution. I believe that part of launching the VM in full-screen is more difficult than automatically launching VMWare at startup. Is there some way I can tell VMWare to launch a particular virtual machine in full-screen when it starts on boot?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved