General :: Cmem.c:38:19: Error: Stdio.h: No Such File Or Directory
Aug 10, 2010
I am trying to compile a memory map module cmem.ko from TI codec tools. This is for the DSPlink software development for the OMAP3530. I am compiling this on the host(Ubuntu). First error could not find cc1 and i re-installed gcc and added it to the path. That fixed that error but then I get to this:
cmem.c:38:19: error: stdio.h: No such file or directory
cmem.c:39:20: error: unistd.h: No such file or directory
cmem.c:40:22: error: sys/mman.h: No such file or directory
I am trying to upgrade my NAS with anew toolchain, gcc-4.5.2. The NAS have been "hacked" fonz_plug, that contain a gcc version 4.1.3 with uClibc. I have download all needed tar files and done the following.My goal is to upgrade the gcc to 4.5.2 and replace the ucLibc on the system with a GNU libc.
# Pass one # # binutils ./configure --prefix=/ffp --libdir=/ffp/lib --includedir=/ffp/include --with-gmp=/ffp --with-mpfr=/ffp But when I try to compile the gcc with ../configure --prefix=/ffp --libdir=/ffp/lib --includedir=/ffp/include --enable-__cxa_atexit --with-float=soft --enable-languages=c,c++ --with-build-sysroot=/ffp --with-build-time-tools=/ffp/bin --with-system-zlib --enable-threads=posix --disable-bootstrap
I tried compiling a simple Hello World with gcc but didn't have any luck. I got this message: Code: junk.c:1:19: error: stdio.h: No such file or directory gcc was installed and configured correctly at one point but I think I changed the the .bash_profile since then. I checked where stdio.h lives. The path is:
I have looked at the other threads and found nothing which pertains to my issue. I am using an older version of Debian 4.0 I cannot upgrade until I have a 2nd server running. I lost the 4.0 installation disks. During an apt-get install i did, I foolishly changed sources.list to other sources on the net which changed dependencies and removed needed packages, such as perlmagick, Crypt-SSLeay, aptitude, and possibly the glibc - ( my current glibc was changed to glic6). Since I have found my original 4.0 disk. restored the sources.list. ran an update. and restored many of the packages that were removed. (a big lesson to me I will never do that again)
Here is a simple program: #include <stdio.h> When I run a gcc or I use cc compile I get this message: "stdio.h": No such file or directory found. Yes I know I missing the file stdio.h. I have looked in /usr/include /usr/lib nothing.
Apparently during my mistake the system installed the glibc6 and removed the "stdio.h" file and other dependencies. I would like to get back to where as was in terms of the glibc version I had. Aptitude currently shows the following packages that are available to me
Code: DEB1:/etc# aptitude search glibc v glibc-2.3.6-2 - v glibc-2.3.6.ds1-1 - p glibc-doc - GNU C Library: Documentation v glibc-pic p libg++18.104.22.168-glibc2.2 GNU C++ extension library - runtime version p libstdc++2.10-glibc2.2 - The GNU stdc++ library DEB1:/etc#
The question is which one should I install, to get my "stdio.h" back again? Would I have to uninstall glibc6 first? Uninstalling glibc6 displays a big warning. Is there a way I can download just the "stdio.h" files?
I copied g95 executable under /usr/bin which is clearly in my PATH. When I type g95, it says "bash: /home/username/bin/g95: No such file or directory". Why doesn't it look for somewhere else that is in my PATH?
I am trying to compile the code. I am getting this following error. Am I missing any package?
x86_screen.h:12:22: error: X11/Xlib.h: No such file or directory In file included from osal_event.c:12: x86_screen.h:25: error: expected specifier-qualifier-list before �Display� make: *** [osal_event.o] Error 1
I am migrating an application from HP-UX to Redhat Linux and I have some files of scripts. In one of the script files I have the line /pylive/smartPAY/spserver/scripts/sp.con which is the correct path and file name for an existing file. However I get the message "No such File or Directory/pylive/smartPAY/spserver/scripts/sp.con" The script worked fine in HP-UX, why not in Redhat Linux?
When testing my script for a question, I find that when I execute the expanded commands, I get no error message, but when I source the file with the command, I get 'No such file or directory'. Here is what I mean:
I am trying to compile a file named process_30sec.c(thats a C program) through the Ubuntu terminal and it is showing the following error in command terminal: process_30sec.c:15:23: error: asm/bitops.h: No such file or directory I have just started using Ubuntu&Linux so I am not familiar with lots of commands and things going around.I am using the following command to compile the process_30sec.c file:
kutub@ubuntu:~/Desktop$ gcc process_30sec.c
The above mentioned program file contains a header file <asm/bitops.h>, that I need to use in the program.It seems that this header file is not recognized by the system, and it needs to be included somewhere in the system so that the terminal would allow me to compile this program.
I'm trying to install a WiFi Wireless IEEE 802.11N/G/B WLAN 150Mbps Network Adapter USB2.0 on Slackware. I get the following message when I enter "make install." cannot stat rt3070sta.ko no such file or directory
My ubuntu stops when mounting system hdd. The screen display the following messages :
mountall:/etc/fstab: No such file or directory fsck from util-linux-ng 2.16 WARNING: couldn't open /etc/fstab: No such file or directory init: mountall main process (545) terminated with status 1 General error mounting filesystems. A maintenance shell will now be started. CONTROL-D will terminate this shell and re-try. udevd: can not read '/etc/udev/rules.d/z80_user.rules. Ubuntu: clean, 474879/24231936 files/28016581/96898047 blocks root@i7:~# exit_
I suspect the disk manager pysdm that i had just installed today and it had crash during the previous session. The /etc/fstab file does not exist anymore and i cant rename the fstab.bak because the disk is read-only even for my root user
trying to write my thesis in Lyx 1.6. It works fine on my windows laptop at home but Not on my work computer. The problem is, when i try to view it in pdflatex it comes with with: Lyx: file name error The directory path to the document cannot contain spaces
can you see below command i give return me error however it has been working fine before. there is 1 directory i want to make it .tar.gz [root@sa1 script]# tar cvzf /var/opt/bkup_axigen/axigen_bkup_2.tar.gz /var/opt/axigen/domain tar: Removing leading `/' from member names tar: /var/opt/axigen/domain: Cannot stat: No such file or directory tar: Error exit delayed from previous errors
Code: mkdir: cannot create directory `/dev/cgroup/cpu/user/5900': No such file or directory bash: /dev/cgroup/cpu/user/5900/tasks: No such file or directory bash: /dev/cgroup/cpu/user/5900/notify_on_release: No such file or directory It seems like it's probably from this part of .bashrc:
What does this code do, why, and what's causing it to go wrong?
I get an error when running slapt-get. The error is: "slapt-get: error while loading shared libraries: libsas.so.2: cannot open shared object file: No such file or directory".
I've booted the Slackware disk # 1 and unchecked everything except the libraries category and installed them. I rebooted and it still says this. I get this same error before I put the disk in and rebooted to install ALL libraries. I really need help. BTW, I can't load KDE.I found a pkg manager already installed called "slackpkg". But I really need help on this library issue!! I uninstalled it (slapt-get) anyway, so forget that!
I am new to Linux and I wanted to setup a dedicated game server on my notebook.
I've installed Ubuntu 9.04. I than created a directory named /home/phlex/kfserver. I downloaded the application binary from Steam. I changed the file permission with chmod +x hldsupdatetool.bin and now the file attributes are -rwxr-xr-x.
The problem is when I try to run the binary file. If I type ./hldsupdatetool.bin I get an error message "-bash: ./hldsupdatetool.bin: No such file or directory. It seems the OS can't find the file. I've downloaded the file several times thinking it may have been corrupt but it's not. I can delete the file, I can rename it and so the file is there. Sometimes Linux can be aggravating to use.
Salutations,I've been struggling with getting audacious working for the past hour. I'm using synaptic to install it. When trying to run it from the bash, I'm getting the following error:
Code: audacious: error while loading shared libraries: libmowgli.so.1: cannot open shared object file: No such file or directory.I tried to make /usr/lib/libmowgli.so->libmowgli.so.1 link, but it didn't help. Tried reinstalling audacious/libmowgli and a few others packages, but in vain, too.
I'm trying to setup a keyboard-command to open my downloads folder. Simple enough. To get things started off I did $ gnome-open /home/user (my name where user is) and it opens my user home directory. But when I get to adding downloads to the end of it it gives me this $ gnome-open /home/user/downloads Error showing url: Error stating file '/home/User/downloads': No such file or directory As far as I can tell there is most obviously a downloads directory in my user folder. I also get this error when trying to open any other home folder, like music, or pictures.
On a new installation of Linux Red Hat server, I was adding new users from the list using "newusers" command. I did not realize that one of the users was "root" so this is what line I loaded by error (among other users) : root:root:1176:501::/home/circuser:/bin/bash all other users from the list (160 of them) got loaded properly. I still have valid root login that I could use, but I'm not able to log in as root anymore. If I log in as user and then try "su" or "su -" I get error: ": No such file or directory".
I compared /etc/passwd, group and shadow on this server with old one I'm replacing and entry for root looks the same:
root:x:0:0:root:/root:/bin/bash ( in passwd) root:x:0: (in /etc/group) root:$1$OILC.ETm$LkoGprgqqgv6v8oLRUBnf.:15153:0:99999:7::: (in /etc/shadow) - similar to my old server
Well, I am facing problem when doing lab questions.
I must use DLXLinux bundled in Bochs (bochs.sourceforge.net).
I am required to use the /usr/local directory.
In /usr directory, there is no directory named 'local' but there is one thing called 'local@'. So, when I try to use mkdir command to create 'local' directory in /usr , there are error "cannot make directory.....".