General :: Can't Find APTonCD For Backing Up Downloaded APT Package?
May 20, 2011
I've downloaded and installed ATP for Ubuntu 11.4 on an internet enabled computer. Now i want to use it on a computer which has no way to connect to internet. How am i going to do that.
View 5 Replies
ADVERTISEMENT
Jan 15, 2010
I download packages (nautilus or squash) for photo bulk resizing, and voil�! I can't find where they end up!
View 9 Replies
View Related
Mar 1, 2010
after the netinst finished to download the last package, one hour later the process never continues, I checked the log file and I didn't find anything suspecious, also dmesg and nothing, in fact, in the log file before checked I found that the last line was registered just a minute ago - DHCP renew IP-, so my questions are:
1. all the packages downloaded are gone?, can I restart the installation using all those packages downloaded?
2. where I can find the error or problem that cause that the installation was freezed?
3. in the case that installation needs to start from the beginning, can I use the package downloaded?
View 3 Replies
View Related
May 16, 2010
how would I backup a specific package. Really all I want is the configuration files.
the package I'm talking about is mumble-server, could I say rsync all the files that were installed, then if I wanted to drop it in just copy those back over?
If I had to wipe the installation and reinstall, could I install that package again then drop my backup copy back over it?
Dpkg tells me these are the files it installed.
Code:
dpkg-query -L mumble-server
/.
/var
/var/log
[Code].....
View 1 Replies
View Related
Dec 14, 2010
I am trying to install a brand new installation of Opensuse 11.3 on a PC. I am using the Gnome desktop. When installing I get SO many errors saying "YAST2: package "xxx" could not be downloaded" or "installation of package "xxx.rpm failed." Ignore, Abort Retry.
I ran a checksum on the iso I downloaded from this site and it checks out. What is going on?
View 9 Replies
View Related
Mar 30, 2010
Is there a plug-in package that can be downloaded instead of doing each one, one at a time?
View 2 Replies
View Related
Aug 5, 2010
I have downloaded Thunderbird 3.1.1 package thunderbird-3.1.1.tar.bz2 . I don't know how to install it. My Ubuntu is 10.04.
View 3 Replies
View Related
Jan 23, 2011
I am a newbie to Ubuntu. I have installed Ubuntu STudio 10.04 Lucid, and to install Open Office, I have chosen the below method:
1. Went to System-->Administration-->Synaptic Package manager.
2. Here, I chose Open Office Package and marked something, which I now dont remember.
3. Download of the associated packages have been completed, but it is not installed. Around 99 mb is downloaded, but I am not sure where it is saved.
The problem is that, it is not yet installed. After the download, it behaved like it was installing, I waited, but of no use. How to install the same and where the downloaded packages sit in the system?
View 4 Replies
View Related
Apr 30, 2010
Interested in trialing Varkon and used Synaptic Package Manager to download and install. According to the [url]...nstalling.html it should be there under 'Applications'. I've looked through them all and no sign of Varkon. I've also tried to see if Varkon was installed so I looked via Ubuntu Software Center under installed software. No sign. Did a file search for Varkon.
View 4 Replies
View Related
Dec 6, 2010
I want to install latest downloaded package of openssh v 5.6(tar.gz) from original site but not succeed.
steps followed:
1. remove rpm with: rpm -e openssh-ser....rpm
2. extract package, go into directory and run ./configure command
View 9 Replies
View Related
Dec 11, 2010
It just goes to a file I have no idea where?
View 2 Replies
View Related
Mar 12, 2011
I switched from 9.10 to 10.10. In 9.10 there was a folder where the temporary flv ..... video files were downloaded, so I could capture them before being deleted. Now with 10.10, which is the folder? /tmp isn't, I'm watching videos but no flashxxxxx files there.
View 6 Replies
View Related
Jun 19, 2011
just downloaded a deb file for Picasa but cant seem to find the actual program I see icons but they lead to other files I managed to download skype and found it/moved it to desktop
I have just loaded ubuntu onto my laptop so complete beginner
View 3 Replies
View Related
Sep 9, 2010
Used the ubuntu software center to download partimage-doc, then tried to find it with the search function using the word part. Three files showed up in one section but not partimage-doc. How do I find it? I want to read about the program to decide whether to download it.
I'm new to LQ and wonder what is the best way to find this post after the suggested 24 hour wait? Been using linux for most of this year and am enjoying it very much. Will dump windows completely as soon as it is possible to watch Netflix movies and read Barnes an Nobel books with linux.
View 3 Replies
View Related
Feb 27, 2011
Fedora 14 xfceI have installed a package using yum install package-name.However, I can't seen to find out where it has been installed to.Is there any command that will tell me what directory the files have been installed to?
View 2 Replies
View Related
Aug 27, 2010
I have dowmloaded the latest version of Gnome Nanny, but have run into an instal problem at the first hurdle:
I have extracte the folder to Documents: Cd/ to the folder and run the ./configure command and get this message: No package 'pygtk-2.0' found
I have checked the install files and edited the lines which contain the above to now read pygtk -2.0 >=2.8 as 2.8 is the version of python I have installed. In package manager it only goes back to v2.2.
How I can get around this error?
Running Ubuntu 9.1 karmic Koala.
View 5 Replies
View Related
Jul 24, 2011
I've got something or someone downloading from me, probably scraping, and i can't figure out WHAT is using all of my bandwidth, and WHERE it's coming from.I don't know what SERVICE its from (eg, is this an apache request, or DNS DOS), what FILES are being accessed (if any, eg apache requests/scrape), and what IP is requesting them.My apache logs isn't showing anything that makes me thing i'm being scrapped. I'm kinda stuck in a brain fart right now and can't remember how to track this down, but the long and short is that all of my band width is being consumed, and 1 of my CPU cores is staying maxed out ("top" says that it's the avahi service).I've shut off the following services 1 by 1 to see if any of them would cause a drop in network usage, and none of them did:
apache
samba
postfix
[code]....
View 5 Replies
View Related
Feb 20, 2010
I downloaded Wine, but I can't find the program, i can see it when i look in software manager but it's no where else.
I want to play sims 3, but I can't use wine as I can't find it
View 3 Replies
View Related
Jul 14, 2010
First: I downloaded a program and I don't know where is it? Its name is (p3nfsd)
Second: Are there a pro like Nokia PC Suite?
View 8 Replies
View Related
Jan 27, 2010
I've just got this PC with originally SLED SP1 installed. After hours, it seems that it has updated to SP2, but I'm still lost! I can't open help files, and I can't find out how to install downloaded programmes. For example, I would prefer to use Google Chrome as browser, and I can download Chrome for Linux, it shows up on the desktop, but that's it!I have no idea how to install it - it doesn't show up on "new installation.
View 12 Replies
View Related
Mar 4, 2011
I am trying to find the location of a package on my linux machine. There are several commands that i have tried like 'rpm -ql kernel-headers-2.6.32-71.18.1.el6.x86_64' but this is no good.
I also tried the following command 'rpm2cpio kernel-headers-2.6.32-71.18.1.el6.x86_64 | cpio --list! But I get a msg saying "kernel-headers-2.6.32-71.18.1.el6.x86_64: No such file or directory"So I decided to download the rpm and when I tried to install it I get "package kernel-headers-2.6.32-71.18.1.el6.x86_64 is already installed"Is there any way I can find out the location of this file??? It is not in any of the /usr folders (bin, lib, lib64, include etc...)
View 14 Replies
View Related
Jun 11, 2011
I downloaded debian-6.0.1a-i386-netinst.iso. i would like to burn the cd as iso image but i cannot find the iso file in the downloaded folder. i am going to browse the iso file on vmware.
View 6 Replies
View Related
Jul 23, 2010
I downloaded the Dolphin Software (Wii & gamecube Emulator) I am wondering how do I install it. I notice I only see files, I don't even know where to find the application after it is downloaded.
View 4 Replies
View Related
Aug 7, 2010
So I've downloaded a few random things using the software center but I cant seem to find them? The main one I want to access is installed but cant I find/access it. I downloaded a application finder but that hasn't helped at all? So how / where can I find them? Do I use the Terminal?
View 4 Replies
View Related
May 30, 2010
I know there's a which command, that echoes the full name of a binary (e.g. which sh). However, I'm fairly sure there's a command that echoes the package that provides a particular binary. Is there such a command? If so, what is it? I'd like to be able to run this:
commandName ls and get coreutils for example.
View 1 Replies
View Related
Mar 26, 2010
Using rpm -qa | grep -i <pkgname> gives if a package is installed or not.
But, I would like to find out where a package is already installed i.e the location where a particular package is installed say /opt/<pkg>
View 2 Replies
View Related
Sep 24, 2010
I just checked that APTOnCD is a .deb package. The internet connection I have is on OpenSuse 11.2. So I can't install APTOnCD on OpenSuse, Can I ?
I have to create a Repository for LinuxMint (which is Ubuntu based) on a CD/DVD.
What is the way out ?
View 13 Replies
View Related
Feb 20, 2011
I'm trying to install libboost-all and libboost-all-dev, but it says the package couldn't be found! Any idea how to install this via putty now? Also, how can I update my cmake to 2.6.x ? it's at 2.4.7
View 11 Replies
View Related
Aug 25, 2009
Is there a flag or option to discard case sensitivity to find whether package is installed or not?
from http://www.rpm.org/max-rpm/s1-rpm-query-parts.html
Quote:
Note, however, that RPM is a bit picky about specifying package names. Here are some queries for the C library that won't work:
Code:
rpm -q libc-5.2.1
Let say I want to find out whether PyQt is installed or not but not sure the exact case, i.e. pyqt or Pyqt or ....
is there a way to find whether a package is installed or not without knowing its case exactly?
View 1 Replies
View Related
Jun 1, 2010
Id installed aptoncd on my lucid using the software center. When i want to use it, the aptoncd does not appear at all. when i run it using terminal, the output is this :
anidah@anidah-laptop:~$ aptoncd
(process:3319): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
[code]....
View 7 Replies
View Related