I installed the latest kernel liquorix (2.6.35) but when i want to install the Nvidia driver downloaded on the Nvidia website (256.53), i have an error message because Nvidia doesn't found the kernel source tree.
I install linux-image-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb, linux-headers-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb and build-essential. I don't understand why the installation doesn't works.
I have downloaded fedora 10, i386 and right to DVD/UD using 4x write speed. I have one machine have installed win xp, now i want to over right here, when i select installation , its asking common questions like language, drivers, when i select from Local CD/DVD i got 'No Driver Found' Error.
I have made a full install of Slack 13.37.0. When I try to run the installer of the NVIDIA GF 8400GS card (NVIDIA-Linux-x86-180.29-pkg1.run) downloaded from [URL], I receive an error message. It says that the kernel source cannot be indetified/found. /lib/modules/188.8.131.52-smp/source and .../build links to /usr/src/linux-184.108.40.206-smp, which contains the full kernel source (can be compiled), including the header .h files in include/linux. The same NVIDIA installer can be run successfully on my previous Slack 11.
When I try to Install Linspire I always encounter the error 25 can please what king of error this. Is this a Hardware problem or what. because this is my first time to use this Linspire....Regarding to xandros when I try to install this I always encounter error 17 but I used express installation and when the xandros ask to restart the pc and start he did not continued execution it appear error 17.
I am Vamsi from Alcatel-Lucent. We have a software to configure the wireless broadband devices to the Linux machine. Till now, it was running on FC-5. When we need to add any new device, we used to add it in airprime.c, sw.h and usb-serial.c under /usr/src/linux/drivers/usb/serial directoy.
Now we are trying to upgrade the system to FC-12. But I am not able to find any kernal files under /usr/src/kernels/220.127.116.11-127.fc12.i686.PAE/drivers/usb/serial directory. I saw in some websites that the kernal files can be found at: /root/rpmbuild/SOURCES/linux-2.6.31/drivers/usb/serial. But in my system, there is no rpmbuild directory.
I am trying to install logitech libwebcam but I can't get the source of uvcvideo driver. I have that driver installed and running properly and it appears when I do the lsmod, but I can't find the uvcvideo.h header file even after installing the kernel-headers and kernel-devel. Does it exist in a specific library that I should install ?
In order to configure a dual display in a fresh 11.4 installation, I am attempting to install the nVidia driver according to the instructions in SDB:NVIDIA the hard way - openSUSE. I have not previously compiled or configured a kernel so I largely followed the instructions from OpenSUSE 11.2 - How to compile a Kernel for Newbies.The currently installed kernel is 18.104.22.168-1.2-desktop. The graphics card is an ASUS EN9600GSO (512MB).
In Yast, I installed gcc, make, kernel-devel (v. 22.214.171.124-1.2) and kernel-desktop-devel (v. 126.96.36.199-1.2). Per the "hard way" instructions, I did not install kernel-source.
So after getting around the Fakeraid bug, and the grub bug, and all the other bugs killing my system fixed and then i moved on to install my video driver. There was nothing in Administration>Hardware Drivers, so i downloaded the latest driver for my two 8600m gt cards. Did the whole ctrl+alt+f2 and then stopping xserver and then running the driver install only to run into yet another damn bug(see log below)
I have tried fixing it by doing what other threads have said to do e.g:[URL] still nothing. Below is the Nvidia log.
When trying to install the nvidia graphics driver I get the following error-message:
ERROR: The kernel header file '/usr/src/linux/include/linux/version.h' does not exist. The most likely reason for this is that the kernel source files in '/usr/src/linux' have not been configured. How do I configure the kernel source files?
I have a Logitech Quickcam Pro 4000 webcam which is supposed to work OK with Linux. I use Open SUSE 11.0 and under gqcam I have multiple images. And in black & white. See here: (if the image doesn't show it can be found there: WebcamOpenSuSe on Flickr - Photo Sharing! So, I wonder: is this a problem of gqcam or a driver problem? The only thing that maybe I didn't do right is to install the Gspca/Spca5xx driver found here: HCL/Web Cameras - openSUSE because my camera isn't on the list of UVC compliant webcams.My camera is seen as: Bus 005 Device 002: ID 046d:08b2 Logitech, Inc. QuickCam Pro 4000
I followed this tutorial: [URL]... I followed it on my ubuntu system to get my 2 x M-AUDIO Delta 1010s working. My deltas are now detected. And apparently it's all ok. However when I try and open Ardour (which I installed from the repos), I get: Quote: [ERROR]: No devices found for driver "OSS". My graphics cards aren't attached to their break out boxes. Could this be why? For that same reason, I can't test to see if the audio is coming out. All I know is that Ardour can't find a device.
I would like to test 12.1 M5 on my real hardware, so I have special for this purpose two additional partitions (sda2 (to install milestone) and sda3 (to store installation ISO files)). I am running my stable 11.4 with Grub on sda1.
I do not like to burn DVDs just for short test of one milestone, so I was used to download DVD ISO, to unpack it to sda3 partition with all its files, then I changed Grub to boot install Linux from sda3. Installation complains there is no DVD or CD, then I chose to force installation from hard disk and select sda3 partition and select root directory "/". As I was used to from 11.4 this will start installation as it would be started from DVD.
But I think the problem has appeared since 12.1, where I get message: No repository found. (on sda3 / ), so the installation does not start.
I know this is not official way to install openSuse, but it worked before, and it was fast and easy for me, to install from hard disk.
Ubuntu 9.10 was set up to handle the booting selection - previously I thought it was xp but Ubuntu 9.10 "did" it. The system started out as a xp / ubuntu 9.10 dual boot on a 400gb drive. xp has 210gb, ub has 80 and their is a 100gb shared storage. Xp was installed first and then I followed a guide over at linuxconfig.org to get ub installed so that I could select which OS was wanted at boot. Ubuntu manages the boot up menu (Went back to look at my notes from the original setup) The owner tried to update to ub 11.04 and afterall was said and done the machine now boots to the message
error file not found grub rescue I can't say if 11.04 was properly installed or not. Ask whatever you like and I'll give the best answer I can. I think the xp install is okay but I can't say for certain as I don't know how to boot it outside the bootmanager at startup. Data has been saved so if I have to blow it all away and start over I can but I'm hoping I won't have to.
I have a problem with my hard disk...this HHD had no OS just data in some linux file system....i tired to plug it in a windows OS and backup the files....but now the HHD file systems shows RAW. Now when i plug in fedora 15 OS the HHD is not mountable. I tried to # grub-install /dev/dbc1 but it give me an error. error "Bios driver not found" What can i do to restore my file system so i can recover my data?
I am new to this and just got a SUN Netra 440MHz T1 105 with 512MB RAM, 2 19G SCSI drives and a IDE CDROM.I am having trouble loading Ubuntu 9.05 server iso via the CDROM. The CDROM driver does not get found and the installation aborts. The CDROM is a 24x toshiba XM-7002B.I can load the old Ubuntu server 7.10 but cannot update it. (would need some help to do that, too).
I have installed SUSE 11.2 and have performed update software manually, using YaST > Online Update. This all appears to be successful. I am getting an error dialog that says Problem connecting to a software source There was a (possibly temporary) problem connecting to a software source. Pleas check the detailed error for further updates. the details are as follows:
I have just done a reinstall of Centos 5.3 on a dedicated server (via a KVM). My partition arrangement was the default presented to me by the installer:
As you can see, I'm using LVM for everything other than /boot (I need to use LVM for an app I am testing).
On reboot, I get the following:
It looks like it can't find vmlinuz-2.6.18-128.el5 in /boot.
I have rebooted using the Centos Install Disk 1 and gone in to rescue mode. Rescue mode mounted my / under /mnt/sysimage, from there I could see that /boot had been mounted from /dev/sda1 as it should be.
However, there was no initrd.image or /vmlinuz-2.6.18-128.el5 under /boot or /boot/grub. Shouldn't the CentOS installer have created these?
I am quite new to centos as I am from a windows back ground and trying to change over. I am trying to install Asterisk on a dell quadcore server running centos. I need to install Dahdi for hardware support but when I try to install it I get the following error You do not appear to have the sources for the 2.6.18-164.6.1.el5 kernel installed I don't have a clue
I am running Xubuntu on a MacBook Pro with fluxbox as my window manager. Yesterday when I attempted to launch firefox I received a bus error and the application did not launch. I corrected the problem by removing and reinstalling firefox. Today the same problem is happening with emacs. I have not tried removing and reinstalling emacs so I am not sure if that will work but since the problem has occurred in more than one application now, I assume it points to a larger issue. I have done some research on bus errors but it isn't clear why this problem would manifest in different applications in this manner. After the a failed launch the dmesg reports this, which seems relevant:
I'm running spamassassin and want to install the fuzzyocr module for it. One of the dependencies of fuzzyocr is 'giflib' but according to the fuzzyocr page, it needs to be patched before I install it, with a patch which they supply on the fuzzyocr download page. I've tried to install the patch and get the following error.
I managed to get following config up and running very nicely with an 11.3 installation. But recently I did a clean install of the OS and hoping to preserve my data in the home HD (2TB) partition I did the following operation which resulted in black screen screen with error 15: file not found.
Config: one SSD root (90GB) and swap (30Gb) second HD for home (2TB)
During the installation I reformatted and mounted the SSD with root and swap as above. I left the home HD (2TB) unformatted and mounted as home.
When I did my first boot up, it worked perfectly - Even Fire Fox booted up with my recovered pages as of my last install! However after installing my multi-media codecs, and security updates, etc. to the fresh install I rebooted the system only to discover that I am unable to get past GRUB!
I don't have to lose my data every time I do a fresh install to new ISO release.