General :: Internet Connection Active On Laptop But Cannot Browse?

I cannot Browse Even Internet is Active. Connected using Mobile Broadband using Samsung Mobile USB MODEM. (Modem is recognized Successfully and Connection Shown as active!) I cant browse or even use apt-get update in terminal.. no use. (Even I can see the Gprs icon in the Mobile Phone). WiFi is Perfect in this ubuntu (everything is fine) and Mobile modem working Successfully in Windows too. I have attached the picture.please see it.so you will understand everything

=I==USED==WVDIAL==TOOL===TOOO=
root@saad-laptop:/home/saad# wvdialconf /etc/wvdial.conf
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
Modem Port Scan<*1>: S0 S1 S2 S3
WvModem<*1>: Cannot get information for serial port.
ttyACM0<*1>: ATQ0 V1 E1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 Z -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyACM0<*1>: Modem Identifier: ATI -- SAMSUNG GT-C6112
ttyACM0<*1>: Speed 4800: AT -- OK
ttyACM0<*1>: Speed 9600: AT -- OK
ttyACM0<*1>: Speed 19200: AT -- OK
ttyACM0<*1>: Speed 38400: AT -- OK
ttyACM0<*1>: Speed 57600: AT -- OK
ttyACM0<*1>: Speed 115200: AT -- OK
ttyACM0<*1>: Speed 230400: AT -- OK
ttyACM0<*1>: Speed 460800: AT -- OK
ttyACM0<*1>: Max speed is 460800; that should be safe.
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK

Found an USB modem on /dev/ttyACM0.
Modem configuration written to /etc/wvdial.conf.
ttyACM0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"

=EXECUTING==WVDIAL==AND==ITS=RESULT=
root@saad-laptop:/home/saad# wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1,"IP","imis"
AT+CGDCONT=1,"IP","imis"
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
CONNECT
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Mon Jul 18 11:26:54 2011
--> Pid of pppd: 3062
--> Using interface ppp0 ....

=CONFIGURATION==IN==WVDIAL.CONF=
/etc/wvdial.conf
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,"IP","imis"
Stupid Mode = 1
Modem Type = USB Modem
ISDN = 0
New PPPD = yes
Phone = *99#
Modem = /dev/ttyACM0
Username = a
Password = b
Baud = 460800