General :: Installing Red Hat 4 On SATA Hard Drive

Oct 20, 2009

I tried to load Red Hat Linux 4 on my PC, which has 945 MB, Core 2 Duo Processor, 2GB RAM, 250GB SATA HDD. But i couldnt do so as it did not detect the hard drive and was asking for drivers. I changed the SATA settings to Legacy but still it didnt recognise the HDD...I have Windows XP SP3 also installed on it.

View 2 Replies


ADVERTISEMENT

Ubuntu Installation :: Ubunto 8.04 Cannot Detect Sata Hard Drive Or Sata Drive Cdrw?

May 28, 2011

ubuntu 8.04 server can not detect seagate sata hard drive 2tb or sata Lg dvdrw x22 sata drive .is it possible to install it without buying a pci ide sata card?is it possible to get a driver for sata driver and sata drive that can be recognise by ubunto 8.04 server ?or to get the files for 1.44 floppy diskdoes the late edition of unbutu recognise sate hdd and sata cdrw drive automaticly during the installation of the unbutu?

View 1 Replies View Related

Hardware :: Installing Debian To A Hard Drive That Is Connected To The Computer By A SATA Card

Jun 13, 2010

I have an old computer that I want to turn in to a backup server. I was planning on using a 1 TB drive connected by a SATA card since the motherboard only has PATA. However when looking everything I've found makes it sound like I need to install the card for it to work. I want to know if I can install Debian to the hard drive through the SATA card or not?

View 6 Replies View Related

General :: No Hard Found, When Installing RHEL5 On SATA 3 Hard?

Mar 20, 2011

I tried installing Red Hat linux on my Sata hard disk . As soon as the hardware detection phase starts it generates the error "No hardware detected".roblem? (I have also tested RHLE 5, CentOS 5.4, but none of them detect the hard disk and I can not install anyone).I have installed Windows 7 on one of my disks and I have not any problem with it.I also changed storage configuration in Bios as AHCI, IDE,

My Hardware config is as below:
Mainboard: ASUS P6X58D premium,
CPU: core i7 950,
HDD: two 1 TB WD SATA3
Ram: 6 GB (3*2 GB cruciall[/U][/U][/B]

View 4 Replies View Related

General :: Finding A Tool That Will Detect Whether Having A SATA Or A PATA Hard Drive Interface?

May 18, 2010

Is there a tool for Ubuntu that will detect whether I have a SATA or a PATA hard drive interface, even if there's no hard drive inserted?

View 3 Replies View Related

General :: Distros And Get The Same Message Faulty Hard Drive SATA The Computer Was Running Windows Vista

Jul 22, 2011

I have tried many distros and get the same message faulty hard drive SATA the computer was running Windows Vista just fine. I changed the Bios for SATA to be ATA instead of ACHI..

View 1 Replies View Related

Hardware :: Can SATA 3 (SATA III) Hard Disk Be Run On Motherboard Which Only Support SATA II

Aug 13, 2010

Can SATA 3 (SATA III) Hard disk be run on motherboard which only supports SATA II, except sacrificing the speed (throughput)?

View 2 Replies View Related

Hardware :: SATA Hard Drive Will Not Mount

Aug 2, 2011

I have a number of drives that I am setting up for friends who wish to switch/alternate from Windoze. So far several completed. One particular drive is being a bit difficult. When checked on my system[10.10] by Sata/USB wire it reads OK and gives the following info. 200GB, 768kb used, file sys Ms-Dos

When installed on the Mobo as main drive and machine booted set to boot from HD it sometimes reports 'No Drive Found' Reset the BIOS to boot from CD and Load Ubuntu from DVD- it goes through load routine then reports 'Error- cannot Mount drive[or words to that effect] Tried installing frm CD/DVD drive to the disk via the SATA/USB wire But that failed also with CD Auto load error So the disk seems to need setting up in some way to suit Linux presumably just like FDisk in Dos/Windoze

View 8 Replies View Related

OpenSUSE Hardware :: Support For Sata 3 (6 Gb/s) Hard Drive?

Jun 1, 2010

Dear OpenSUSE experts: I am a dual boot computer: Win 7 64 bit and OpenSUSE 11.2 64 bit. This computer has 3 hard drives: SSD, 500GB sata II, 1 TB sata 3. SSD contains openSUSE 11.2 500GB sata II contains Win 7.

Win 7 sees the 500GB sata II drive and the 1 TB sata 3 drive. openSUSE sees the SSD drive and the 500GB windows drive. The Motherboard BIOS sees all 3 hard drives. Is it openSUSE not support sata 3 drive? Or do I have to install special driver for it to see it in OpenSUSE?

View 5 Replies View Related

Ubuntu :: Sata Hard Drive Order Isn't The First One In The List

Jan 16, 2010

I have 4 hard drives in my computer. 1 for may root and home partitions. 2 extras for storage and 1 for Windows. I have the hard drive with my root and home partitions set as the first hard drive in the bios. However, in the Ubuntu setup it isn't the first one in the list. I would have thought that the first drive would be get set to sda. That is not the case.

View 1 Replies View Related

Red Hat :: Won't Start Macbook Nvidia SATA Hard Drive

Jan 22, 2011

I have REHL 6 Desktop. I have a macbook pro 7,1 with nvidia graphics and (I believe)a nvidia sata controller. I have fedora currently installed with no problems during or after installation ( with a few drivers of of course).

When I boot with the disk i burned ( works on other computers) it comes up of a list of devices to select and when i select local CDROM or DVD it goes to select drivers. So, then I tried "burning" the installation files to an external hard drive then I used the DVD to boot and selected Hard Disk then selected SDB1 (path of external HD). With this method I get to the Graphic installation screen and can go to the part were it says custom partitioning. I select ok then it say the only disk that is available is SDB1 (EXTERNAL).

View 6 Replies View Related

Fedora Installation :: Sata Hard Drive Failure At Boot

Dec 27, 2010

i have a netbook compaq mini with a sata toshiba hard drive.XP was installed on this machine until the hard drive started to have bad blocks.Then i bought a mypassport500go to install f14 on it.It worked but know the sata hard drive is more and more faulty.When i try to boot f14 it displays :acpi : package has zero elements. So i cannot boot.I tryed rescuecd, does not work either.i tryed many kernel params to disable sata at boot but it seems to be builtin.there is no option in the bios to disable the hard drive.

View 8 Replies View Related

Ubuntu Installation :: 9.10 Can't Find SATA Hard Drive On DG45ID?

Apr 5, 2010

I have a Desktop system using the Intel DG45ID motherboard with integrated graphics. I can't install from the 9.10 LiveCD. It can't find the Hard drive which is on the chipset's SATA controller.However, I can install 9.04 just fine. I can even do the 9.10 upgrade without a problem.Does anyone know if this bug has been reported. I'm hoping 10.4 has this fixed. I'll test the beta to see

View 9 Replies View Related

Ubuntu Installation :: Using A 500gb Sata Internal Hard Drive?

Sep 15, 2010

I have appealed to anyone on this forum site for any help on installing Unbuntu 10.04.1 LTS on a MACBOOK PRO (Mid 2007 Model. Basically I've followed a few threads & posts on how to Quad boot a Macbook Pro & it seems pretty straight forward,however. Ubuntu is not playing ball for some reason?? The first attempt I tried I had the partitions as follows:

I am using a 500gb sata internal hard drive.

WIN 7 - 125gb
STORAGE - 15gb
WIN XP -125gb
MAC OSX - 180gb
FREE SPACE 50gb - Formatted DOS - Which would become the EXT4 & SWAP FILE partition.
After following instructions:
http://hydtechblog.com/2009/01/26/du...windows-vista/

[Code]...

View 7 Replies View Related

Hardware :: RHEL5 Is Not Installing On SATA Drive?

Sep 4, 2010

I have my home pc and previously it was dual boot as windows and linux.I want to reinstall rhel5.5(32 bit) but I am not able to do so and getting following error:

Error partitioning
Could not allocate requested partitions:
partitioning failed: could not allocate

[code]...

View 3 Replies View Related

OpenSUSE Hardware :: Install Sata And Clone Pata Hard Drive?

May 20, 2010

I recognize the obvious need to back up the contents and follow a certain duty of care before attempting to clone my failing pata 250g HD to a 1 tera byte sata. What problems if any could come up when cloning from a failing pata to a sata HD? I'd like to make the switch to sata for many reasons if possible. It is indicated that the HP d530 sff here supports both types.

View 2 Replies View Related

Ubuntu Installation :: Not Recognizing Video Card And Sata Hard Drive On 9.10?

Feb 21, 2010

I have been trying to install Ubuntu on my main computer for some time. I think I have two problems: my hard drive and video card. I started with Ubuntu 9.04 but got nowhere. I am now trying Ubuntu 9.10 32 bit. I can at least use the live cd if I put the video on safe mode. Just in case you are wondering, I have tried other distros: Fedora, OpenSUSE, Slitaz, Wolvix, etc. Only Slitaz and Ubuntu 9.10 works on a live cd.

Information on my computer:
OS: Trying to install Ubuntu 9.10 32bit
Motherboard: ASUS M3A78
CPU: AMD Phenom 9500 Quad Core

Video Card: Galaxy Geforce 9500 GT 1GB 128 bit DDR2 (Nvidia) Hard Drive: Hitachi 1 TB Sata Drive 3 Gb/sec 7200 RPM Ram: 4 GB (I think, its been awhile since I built this thing) DVD Burner: LG I think I have two problems: the Sata Hard Drive and the Video Card. When I go to install it, I can get to the install menu but from there all I get is a blank screen. I have tried to put the video in safe mode then install it but I get the same result: a blank screen.

How do I know if Ubuntu recognize the Hard Drive and Video Card? I tried the mount command to see what it sees but I didn't notice any Sata Drives. I was told that I may have to do something with the kernel so it will recognize my Hard Drive. How would I do that?

I have been working on this for awhile now. On a side note, does it matter which Sata Plug the hard drive is on? Right now I have it on the 1st one but I would like to move it to the second one because I want a dual boot system. And yes I know I can use the same hard drive but I would like to keep them separated and use a switch to pick which OS system to use.

While running on the Live Cd, Ubuntu seems to know about my video card and ask to install some drivers but then it asked to be rebooted and it came back up not recognizing anything; video card and hard drive that is. On the live cd I ran the following commands: lswh, lspci, mount, and df. I am not too sure if they will show if the hard drive and the video card are working since I did them on the Live CD. Also on the lspci command, I did this after Ubuntu loaded the driver for the card.

[Code]...

View 9 Replies View Related

General :: Erase Everything On Hard Drive Before Installing?

Jun 22, 2011

After installation, when starting to boot, I have several choices showing:

1)Ubuntu, w/ Linux 2.6.38-8-generic pae
2)Ubuntu, w/ Linux 2.6.38-8-generic pae (Recovery Mode)
3)Memory test (memtest 86+)
4)Memory test (memtest 86+, serial console 115200
5)Windows Server 2003 For Small Business Server (on /dev/sdd1)

I used #1 and I only have a blank screen.
I used #2 and I went into recovery mode, but I keep getting the error message: "No root
file system is defined. Please correct this from the partition.

I just want to erase all of numbers 1 to 5 and start clean. what should I do?

View 8 Replies View Related

General :: Installing To A Netbook Without A Hard Drive?

Feb 24, 2010

I bought a MENQ easy PC e790 with 2GB flsdh memory and 128 M RAM but no hard drive. It comes with Windows CE 5.0 The specs are as follows:

CPU: Samsung 400MHz/533MHz processor
RAM: 128MB
ROM: 2GB
OS: Microsoft Windows CE 5.0
Pixel resolution: 800 x 480 pixels
code....

How can linux be installed in CEs place and what distro would be best?

View 5 Replies View Related

Ubuntu Servers :: Windows XP Disc Wouldn't Find Sata Hard Drive

Apr 10, 2011

I'm trying to get my work's infrastructure built at home before I go up there and show the boss. It is as follows: VMware esxi installed on the server with:

Windows server 2008
Ubuntu 10.04 server

I've got VMware installed. And I have spent the past 7 hours trying to figure out how to manage it. I found out that vsphere has not nor will ever be supported for Linux; which was my first problem.

Second Problem So I had to dig around for a spare Windows 7 dvd. To my UN-surprise it blue screened before it even got to the Windows installer.

Third Problem So I dug around for my Windows XP disc. Wouldn't find my sata hard drive and I wasn't about to dig around for a floppy drive and disk, in order to install it.

Fourth Problem I remembered that I had a dual boot of Windows 7 downstairs and proceeded to download and install vsphere. It wouldn't install because of some updates that needed to be installed. I installed them and got vsphere installed as well. However upon connecting to my vmware esxi, there was yet another error that had to do with some update. I found out that the error had been existent since 2009 and for some reason NO ONE at VMware has fixed it....

View 4 Replies View Related

Hardware :: Test Integrity Of External Hard Drive / Without Removing It And Connecting With SATA To Motherboard?

Jul 28, 2009

I have a seagate SATA hard drive that was running a mythtv distro. It had 3 partitions, EXT3, swap, and XFS. I started having I/O errors on boot and saw error messages on both the EXT3 and the XFS partitions. I also heard some clunking sounds on the drive when it was reading, so I thought hell, the drive is dead.

I have since replaced the drive and everything is back up and running on the replacement drive. I thought hell, the seagate drive is toast, but I just want to verify it with some sort of tool. I have the hard drive in a Vantec NexStar external hard drive case (SATA->USB) and found there was a tool called badblocks. Ran badblocks on it, which ran for 24ish hours and found no bad blocks. I also didn't notice any clunking sounds while it was running.

I ran
Code:
badblocks -n -v /dev/sdb
Is badblocks a proper test to run on external hard drives or was I just wasting my time? Is there any way that I can really test it without removing it and connecting it with SATA to the motherboard?

View 7 Replies View Related

General :: Installing A Second Hard Drive That Has Existing Ubuntu8.04 Installed

Jul 31, 2009

I have a SATA hard drive from a crashed system that was running Ubuntu 8.04. I want to install it in a Ubuntu 8.10 system and use it for file storage. How do I install and reformat it?

View 3 Replies View Related

General :: Installing Debian On External (connected Through USB) Hard Drive?

Apr 23, 2011

I've got Vista installed on my notebook and I've bought an external drive (1,5 TB, but its size shouldn't matter in this case) and after formatting it I left 10 gigs for future purpose. Now, I decided to install 64bit debian on the unallocated 10 gigs. And so I did. To be precise: I have SATA drive inside my lap and hard drive (it's also SATA inside the cover) connected to my lap through USB. Boot sequence was 1)CD/DVD 2)hard drive 3)removable drive. During the installation the installer detected my internal drive as /dev/sda and my external drive as /dev/sdb. I decided to install grub on /dev/sdb (it was logical to me, since I didn't want to mess up my regular drive's MBR). Installer created 5 partitions on my USB drive. After booting from my external drive (look below*) I've got a message saying

Code:

error: no such partition Entering rescue mode... and after that I was in grub rescue console. When I typed ls I've got an output

Code:

(hd0) (hd0,msdos1) (hd1) (hd1,msdos5) (hd1,msdos2) (hd1,msdos1)

When I tried to type

Code:

ls (hd0)/

I only got a message

Code:

error: unknown filesystem This occured for all the listed devices... On my internal drive there were (during the installation and running the live cd) 3 partitions detected (vista os, data, rescue disk) so I don't understand the output that ls in rescue console gave me. about booting from external drive: I did that after pressing ESC - I've got a prompt to choose which device I want to boot from - this wasn't working properly; after changing the boot sequence the grub started but with the abovementioned error message...

If there's any info about exact names/types/devices of my installed partitions needed I will run live CD and check it. If any other info is required I will provide it (I tried to describe the problem in the most precise way ) What I was thinking about: maybe there is a problem with ordering of the devices - when I boot from DVD my removable disk is treated as the "second one" and after booting from the removable disk it becames the "first one" or something like that? If any of you have any good info on how mapping of the device names works it would be appreciated, since I couldn't find anything useful or I just don't know what to ask google about.

1) How to install Debian on a removable disk (I had no problems with installing Linux on pendrive but I did that from VirtualBox and it was some time ago) OR how to install GRUB on a removable disk? (unfortunately, I cannot install 64bit system through VirtualBox)

2) What's the logic behind naming devices under /dev? How come the devices in grub have their names mapped as hdx etc and I've read that hdx are the names for IDE/ATA drives and sdx is the proper name for a SATA or USB device

View 3 Replies View Related

Ubuntu Installation :: Installing 11.04 On External Hard Drive Drive?

Jun 19, 2011

I would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation

Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.

View 2 Replies View Related

General :: Upgrade Internal 2.5" Hard Drive Vs External Usb Hard Drive For An Old Laptop?

Jan 25, 2010

I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...

View 2 Replies View Related

General :: Move Smaller Hard Drive To Partition On A Larger Hard Drive?

Mar 16, 2010

My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.

Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.

View 3 Replies View Related

General :: 3TB SATA Hard Drives Will Work Into An Old System

May 14, 2011

I have a 3 year old PC with 4 internal SATA ports. My old SATA hard drives, all smaller than 2TB, work fine. If I buy a 3TB SATA hard drive, will it work in Linux? Will Linux with GRUB be able boot from such a hard drive without a BIOS upgrade? With a BIOS upgrade? It's fine for me to upgrade my Linux to the newest kernel.

View 1 Replies View Related

General :: Install Redhat9 On Sata Hard Disk?

Nov 14, 2010

How can i install redhat9 on sata hard disk.

it always ask for drivers & i didn't find it.

View 4 Replies View Related

General :: Installing To A Wiped Hard Drive / "unable To Read" Errors?

May 14, 2010

I recently got a computer donated to me for free from my Computer Science class, as the teacher couldn't figure out what the problem was that was preventing him from booting to the startup screen (all I could figure out was that the slot the memory card was in was bad, so I switched slots and got it working). The hard drive on the computer was wiped with a disk nuker called DBAN. Now I would like to install a Linux OS on the computer, but whatever disc or distro I try gives me similar "unable to read" errors. I would like to know if there's anything software-wise I need to do before attempting to replace any hardware. An example of the error I'm getting is as follows (using a mandriva livecd):

/etc/rc.d/rc.sysinit: line 1281: /var/log/dmesy: Read-only file system
SQUASHFS error: sb_bread failed reading block 0xa6e58
SQUASHFS error: unable to read cache block [29b963ea:782]
SQUASHFS error: unable to read directory block [29b963ea:782]

Anyone know what I need to do to get this fixed so that I can install a Linux distro?

View 5 Replies View Related

General :: Sata Hard Disk Not Detected While Installation Of Ubuntu?

Mar 29, 2010

i'm using athlon 64 bit , asus a8vmx mbd, 1gb ram

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved