General :: Hosting Apache On A Machine Connected To A Dlink Router?
May 23, 2010
I recently got a static IP from my ISP. I Have two machines connected to my DLink wireless router. A windows laptop and linux machine runninf centos 5.3. I would like to host an application apache/tomcat based on my linux machine and would like people to access it from the outside. What configurations do I need to make on the Dlink wireless router and my linux box to make it work.
Switched to Ubuntu a few months ago, love it. However compatability crops up from time to time. I'm trying to access a dlink 655 router used at the motel I'm staying at and it just spins and spins. Does anyone know of a patch that will work?
Because of the configuration of my house, I need two routers.I have a DLink ADSL router as my main router and the Belkin N1 as my repeater.I have set up the IP address in the Belkin to be 10.1.1.10 - my DLink is 10.1.1.1. I have disable the dhcp in the Belkin and set the DNS as ISP provided. [URL]..I have set the channel to 11 and in the Ubuntu Network Manger I have set the IPV4 to Link Local Only. I can see the Belkin and connect with my PC.but it will not take me through to the internet.
I have a desktop running Ubuntu 10, a D-Link DIR 320 router which allows my laptop and desktop to share printers/internet. I can get my Canon MP250 to print directly from Ubuntu via USB, and it works wireless from laptop, but I don't know how to get it printing via the usb port connected to the router. Documentation suggests I use 192.168.0.1 but just can't figure out what needs to happen to make the darn thing connect!
I've just recently installed opensuse after being an ubuntu user for about a year. For some reason I can't connect to my Dlink router, but I can connect to my neighbors linksys router. To be more specific it actually connects but acts as if the DNS isn't working. I can ping the router, but can't ping anything past the router. Right now the router is unsecured.
Does anyone have experience with the D-LINK DIR-655 gateway OR router OR wireless access point? On the surface, I like this box, but it is giving me grief. First, it wants me to use a win-dose CD configurator application. I use the embedded web page configurator. Next, there are several configuration wizards at the embedded web page. After trying the wizards, I went to the manual screens to tinker to get something working.
So what is going on? When a LAN client connects, I want DHCP to present at least two "nameserver" values ... which then make their way into /etc/resolv.conf The DIR-655 plays some nameserver games like caching and blacklisting and other things. However, I get some ad-vert page from "dnssearch" or "yahoo" or similar when names don't resolve. I really don't want this behavior. Network-manager does not report the connection down, however streaming anything stops or "reconnects", browsing times out, LAN side traffic seems to stop as well.
I am having vitural hosting around three websites using Centos. I need to type in the full domain name include www to enter the 2 of the vitural hosting sites. Pros and Cons of vitural hosting vs separate machine? I got a questions about static IP. Assume I having a linksys router with port forwarding function, I have three seperate machines with different private address connect to the same linksys router. Can I entry all private address forward to port 80? Does it work? If I insist to host website on three machines, does that mean I need 3 static IP and 3 linksys router? I got two conventional web services only showing information but one got mysql db for user to input data, thats why I asking if it is good idea to seperate web page on different machines.
I am running an apache2 server in ubuntu. When I connect my laptop directly to my modem, I can access my web page (from any computer or phone) without any problems.I start getting weird issues when I try running my web server behind my DLink 524 router. It will run perfectly for about an hour or so then the web page will become inaccessible from any computer except the one which I am running my server on. I have made sure to forward and requests to port 80 on my machine and I have also set the router firewall to allow access through port 80 and port 443. I don't get any error messages in my apache2 log when my site goes down.Since the site worked perfectly when my computer was connected directly to my modem, I figure it has to be a router problem.
So I have a set of 10 *.deb packages that are customized. I would like to host them on my local Debian 5.0 machine on my local LAN just like a typical debian repo so that any I can apt-get them from any machine on my local LAN after adding repo to my sources.list file:
I have apache working,i have users set under admin group in /home/admin/username/html that is with an html publicfolder at the end, now permissions are set right, /html is set to mode 777, and the contents also inside them. But everytime i do a 10.0.11.25/~les i get a damn forbidden error code, its got me so pissed off and i dont' know whats the problem. This is the error i get: Forbidden 403 You don't have permission to access /~les on this server.
[Tue May 05 19:37:48 2009] [notice] Apache/2.2.11 (Unix) DAV/2 PHP/5.2.6 configured -- resuming normal operations [Tue May 05 20:44:30 2009] [error] [client 10.3.0.254] (13)Permission denied: access to /~les denied
I am a newbie trying to enable virtual hosting and run it on a local machine without fqdn. I checked the http://22.214.171.124/ (my IP address) site and saw my (default) page. I would like to virtuly host a asdf.com If virtualy hosting is setup properly - how do I access the new setup? Just type http://asdf.com ? or is there more to it?
So I have apache running on my local computer. When I open up local development sites in tabs in my browser, apache threads are started. That's as it should be. However, when I close the tabs, close the browsers, and then run system monitor/system task manager, I get a long list of apache threads that are sleeping, waiting around for god knows what. How do I get these apache threads to stop hanging around?
I did a wget on the source and built the apache binaries correctly. Now what do I need to do to get some documents accessible using HTTP (start some services?)? Also, do I need to group all the files I want to make accessible in some directory and make the directory and its contents accessible or can I just make the individual documents available? I will be providing these links to my colleagues and do not want them to be down, so need to make sure that the apache services are up automatically after a reboot. Does apache have some inbuilt support for this?
just installed Ubuntu Netbook remix on my acer aspire one, and come across a problem Ive never faced before. Im able to Connect to my router (and access it through the internal ip address) but as soon as i try access anything outside of my network there is nothing!
This i found odd as first i thought it might have just been my Routers problem, but seeing as all my other computers were connected to it with no problems (wired and wireless) I quickly traced the problem back to the laptop.
After this i decided to see if after a simple update would fix the problem. so i connected it up through the Ethernet port once again it connects to the router but no internet! I have tried everything in my knowledge, but with no success!
I am connected to my wireless network but can't connect to the internet. I have searched the ubuntu forums for solutions but none seem to work for me. I can post terminal outputs if required (I know that much).
I'm running a Natty machine wired to a TP-Link router (TL-WR841N) with additional Ubuntu and Windows machine on WiFi. Recently I've had some problems with connectivity on the Natty machine. Connectivity is fine as far as the router, but not beyond it. This applies to all browsers, Software Center, Aptitude and anything else you can think of. Now, normally at this point I would call my ISP, but the thing is, all other machines have connectivity. I've checked the cables twice and anyway, if it were them, I wouldn't be able to ping the router. Router has ping functionality to outside and it's working, have tried ubuntu.com and google.com. Also, connectivity between the wired and wireless machines is fine, pings are flying across the network beautifully.
To use my home broadband, I am connected to a wireless router. How can I scan for other devices connected to that router? I am using Ubuntu 10.10.Is there both a GUI and CLI method?The IP of my router is URL... Please rename this thread title from 'How can I scan for other devices connected to that router?' to 'How can I scan for other devices connected to my router?
I'm running into a curious networking hiccup with my router setup. I have a D-Link DIR-628 wireless router connected to our modem, and a wire running from that to a Linksys WRT-54G (v1.1) in our basement. This setup worked great for a few days, but then suddenly the Linksys stopped routing us to the internet. I can connect to the router page on the Linksys and using the diagnostic tools I can ping the web from there, but none of the computers connected to it can. Everything is fine when connected to the D-Link.
After fiddling around with just about every setting on the Linksys I finally gave up and tried resetting it to factory defaults--and it worked! Everyone could access the internet again. But then, every day or two it locks up again and I have to reset factory defaults again.
I have a router Asus RT-n16 where i've connected my EPSON DX5000. I've configured the printer function, adding the printer as AppSocket, adding router IP and port 9100 (socket://Router_IP:9100), but now i can't get the scanner function.
I've installed packages from here[URL].do (iscan) and adding on /etc/sane.d/epkowa.conf the line
Code: net 192.168.1.1 #my router ip but it's not working. When i run scanimage -L i get this message:
No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). The scanner option worked fine when my printer is directly connected at my computer.
Linux and I have trying to get my Fedora 15 (x86 64bit) on my laptop to print to an Epson Stylus NX515 printer/scanner. I have the printer connected to a router through a wireless connection. I have other computers that are on the network that are Windows based and they of course are printing/Scanning just fine. The printer is located in a different room. I have been searching for a solution but non that explains how to install a printer driver for one that is connected to a router wirelessly.