General :: Debian Says "fsck Failed" After Installed Pardus2009

Feb 1, 2010

I have debian testing installed on my system. I have a separate home partition which i shared with Pardus2009 which i installed later on a different partition.

Now pardus boots fine without errors, but debian says "filesystem check failed" because last mount time of / is in future. it gives a maintenance shell and after a manual fsck corrects this problem, debian reboots fine, but then says theres a problem with the /home partition (but this can be ignored)

View 2 Replies


ADVERTISEMENT

Debian :: Boot Failed - Code 126 - Fsck Failed ?

Jul 22, 2010

Booting up fails with code 126. I am greeted with the following error everyime I start up.

Checking root file system.../etc/rcS.d/S10checkroot.sh: line 174: /sbin/logsave: Permission denied
failed (code 126).

It then says an automatic fsck failed and a manual fsck must be performed, then the system restarted. I have done a manual fsck and it did nothing. I booted up the system with knoppix and did it, nothing.

View 1 Replies View Related

Debian :: How To Continue Booting Debian After Fsck Is Failed?

Dec 31, 2010

I have bunch of partitions on my Debian server installation, so I was experimenting with partitions and saw that is one partition fails fsck on booting time, system waits for root password or CTRL+D key combination. The problem is that my Debian machine is headless and I use only SSH to it. So if fsck fails, I can't to login to SSH (off course, because it is not loaded at this time). So I need to go with monitor and keyboard to machine and press CTRL+D.One option is to disable disk checking at startup by changing fstab file. I don't like this option. Is there any possibility to auto continue booting Debian machine ?

View 2 Replies View Related

Debian :: Dell Vostro 1710 - Fsck Failed During Boot

Jul 18, 2015

I have Debian Wheezy on my Dell Vostro 1710.

There is a fsck scan happening every 35 mounts on my laptop (i.e. when I boot)

It was fine until a few weeks ago when it started to fail.

Here is the error message :

What should I do to fix that ? I use my laptop to go on the Internet and I don't remember modifying/installing anything that could make this happen.

I found the answer : [URL] ....

I just had to type the root password and run fsck manually as follows : fsck /dev/sda7.

View 0 Replies View Related

Debian :: (warning) Fsck Died With Exit Status 4 Failed (code 4)

Feb 19, 2013

My system has stopped to boot at all...

Code: Select alldone.
Setting parameters of disc: (none).
Setting preliminary keymap...done.
Activating swap...done.
Checking root file system...fsck from util-linux-ng 2.17.2

[Code] ....

An automatic file system check (fsck) of the root filesystem failed. A manual fsck must be performed, then the system restarted. The fsck should be performed in maintenance mode with the root filesystem mounted in read-only mode. ... failed!

The root filesystem is currently mounted in read-only mode. A maintenance shell will now be started. After performing system maintenance, press CONTROL-D to terminate the maintenance shell and restart the system. ... (warning).

Give root password for maintenance
(or type Control-D to continue): _

For now, I just don't know what I should to do next to my system has started to work again...

View 14 Replies View Related

General :: Fsck Failed Run Manually?

Sep 23, 2010

loading /usr/bin/teclafsck failed. please repair manually and reboot. the root file system is currently mounted read-only. to remount it read-write do:bash# mount -n -0 remount,rw /attention: only control-d will reboot the system in this maintence mode shutdown or reboot will not work.

View 3 Replies View Related

Ubuntu :: Fsck , A Flat Cmos Battery And Failed Boots?

Feb 24, 2010

my cmos battery is dead , not worrying that much about it but the problem is ubuntu , it has trouble booting thanks to fsck , there is a bug herebut i cant boot , i get the following error # Superblock last mount time is in the futureand i cant boot , i can get it working sometimes , with allot of work , but normaly it just fails !i came to the conclusion that the CMOS time and date keeps reseting and so ubuntu thinks that the last time i booted was in the future (if this makes any sense) and fsck freaks

View 3 Replies View Related

General :: Ubuntu/debian - How To - Fsck.ext3 /dev/hda1 - At The Next Reboot

Jan 11, 2010

I would like to do :

Code:

Code:

Warning: Partition 5 does not end on cylinder boundary.

How can this be possible at reboot (badblocks) ?

(I cannot gparted nor usb because nothing is working) it should fix itself linux (without usb live bootable)

View 2 Replies View Related

SUSE / Novell :: FSCK Failed Error After Resetting Root Password

Jun 9, 2009

We have a server for which the root password had been lost, and there were no other user accounts set up. Yesterday evening I attempted to reset the root password by booting from the install CD and using VI to clear the root password in the passwd and shadow files. I then rebooted, and the system has halted with an 'FSCK failed. Please repair manually and reboot' error, with a prompt to 'Enter root password' below. But of course the root password isn't known (I had expected it to blank after editing the passwd and shadow files, but it doesn't work), so I have no way of logging on.

View 6 Replies View Related

General :: Types Of Fsck Errors - Fsck Errors Are Found On A System?

Jul 22, 2010

Can anybody tell me what kind of fsck errors are found on a system?

View 5 Replies View Related

Ubuntu :: Command Prompt And Said The 'file System Check Failed' And To Run Fsck Manually?

Feb 25, 2010

I have Ubuntu 9.10 installed on my HP desktop, but I'm running an older version (8.10) on a live CD so I can at least get online to ask for some When I tried to log on earlier it went to a command prompt and said the 'file system check failed' and to run fsck manually. I entered 'sudo fsck' at the prompt and I selected "y" to fix all the bad inodes, when it was complete it told me to restart, I then entered 'sudo restart' at the prompt and it said 'sudo uuid unknown'. I have not installed anything recently and I'm not sure what to do.

View 3 Replies View Related

Red Hat / Fedora :: File Repair - Fsck.ext3: Unable To Resolve 'LABEL=/home' FAILED

Jul 27, 2010

while rebooting the system i had supposed to go to file repair system with the problem

fsck.ext3: Unable to resolve 'LABEL=/home' FAILED.

*** An error occurred during the file system check.
*** Dropping you to a shell; the system will reboot.
*** When you leave the shell.

Give root password for maintenance (or type Control-D) (repair file system)# how do i get the system reboot

View 1 Replies View Related

CentOS 5 :: FSCK: Generate Log File For A Forced Fsck?

Sep 25, 2009

When I do a forced fsck, I would like to have a log file to look at after boot.

When I check /var/log/ there are no files there with fsck output

I've run force fsck in these ways:

shutdown -rF now

-and-

touch /forcefsck

View 1 Replies View Related

Ubuntu :: File System Check Failed A Long Is Being Saved /var/long/fsck/checkfs

Jan 9, 2010

just start Ubuntu 9.04 said: File system chek failed a long is beging saved /var/long/fsck/checkfs if that location is writable Please repair the file systmen manually A maintenance shell will now be started Ctr+ D terminate this shell and resume system boot. Give root password for maintenance or type Control +D to continue. I did Ctr+D , and after login said , that can not find /home. I starte with the live cd:

[Code]....

View 9 Replies View Related

Hardware :: "Failed To Read Block" During Fsck

May 30, 2010

I woke up this morning to the horror that the ext3 partition on my 1TB drive (the only partition on this drive), in an external USB drive case, was not readable. I did some poking around on Google for related issues, and found that what worked for many was to have fsck check, and possibly fix, some errors that have occurred on the partition. This I did with the following command:

Code:

root@naglfar:/# fsck -y -C -V /dev/sdc1
fsck 1.41.4 (27-Jan-2009)
[/sbin/fsck.ext3 (1) -- /dev/sdc1] fsck.ext3 -y -C0 /dev/sdc1
e2fsck 1.41.4 (27-Jan-2009)

[code]....

View 14 Replies View Related

Debian :: Run Fsck During A Shutdown Sequence?

Nov 27, 2010

I want to be able to run fsck at, or near, shutdown at the end of the day, and not have to wait for it when booting (important now that I have 1TB drives!). As far as I can tell, the only way to arrange to run fsck on the root partition is if it is unmounted and I believe that only occurs at reboot time.

So, I thought of using the /forcefsck file that, when exists, will force file system check upon the next boot. So I envision having a script that touches that file, or issues the right shutdown command, then lets the system reboot and thus forcing a fsck of the root partition. However, I then want the system to turn right around and then shutdown, so that when I cold boot the system in the morning, I won't see the fsck run at that time, ever.

So I think this boils down to being able to run a one-time init script or something like that. Is there an established way or idiom for running an init script only one time? I know I can create a non-standard init-script that looks for a special file like is done for /forcefsck, and only shutdown if that file is seen, but surely someone else has already come up with a canned solution/init-script to what I want to do.

View 5 Replies View Related

Debian Configuration :: Fsck On Boot Jessie 8.1

Jun 25, 2015

I use debian jessie 8.1 and when i boot it, pc start fsck block clean etc.. but the fsck control is activated every on boot?

View 14 Replies View Related

Debian Configuration :: How To Run Fsck On Mounted Drive

Apr 22, 2016

How to run a fsck on a mounted drive? I attempted unmount and it said no. I suddenly got an error 4 and trying to run a check, and it aborts with can't cause mounted.

View 10 Replies View Related

Debian :: SMART Reports Bad Sectors But Fsck Finds None

Nov 14, 2015

I am running Wheezy 7.9 (32 bit) and using Gnome Classic desktop. I have recently had several issues with system "crashes" and such, see some of my recent posts, and for now things seem to be working okay. As part of my attempts to "fix" the problems I looked at the hard drive using the SMART disk utility, and also ran "smartctl". The SMART utility reports that there are 3 bad sectors on the drive. When I run fsck, from a live CD, it does not report finding bad sectors. So why would fsck not find something that is reported by smartctl? Which one should I believe?

As a precaution I am now making daily backups of my /home directory and purchased a new HD just in case. Have not yet installed the new HD but at least I am prepared.

View 10 Replies View Related

Debian :: Automatically Continue Booting After Fsck Fails?

Dec 30, 2010

I've just migrated to Debian from Ubuntu on my server. So my first post here. I've had some problems and questions when installing and configuring Debian, now everything seems very smooth, but still I can't find answer to one question. My machine is headless and I allways use SSH to it. I have several partitions on machine so if one of them fails on booting time with fsck, I need to press CTRL+D combination to continue. In that case I need to go to the machine with monitor and keyboard and press that combination. Is there any way to automatically continue for example after 30 seconds ? Then I could log in to the system and check log files what is wrong. How can I do that ?

View 2 Replies View Related

Debian :: Fsck.ext3: Unable To Resolve 'UUID=theUUID'

Jun 24, 2011

Upon booting my LVM wheezy setup, I get

fsck.ext3: Unable to resolve 'UUID=theUUID'
where "theUUID" (without the quotes) is the UUID

I believe this is caused by me trying to get lvm to use the external /boot because when I had unmounted the external /boot, it was creating a /boot in root. So, I booted a live cd and mounted the external /boot where /boot in the root volume is supposed to be. Basically, I think the problem is that I need to make my /boot (which is the only ext3 partition in the entire system and I want it that way) "relate itself" to the lvm root so that it boots into the system. As mentioned earlier, in the live CD, I made the external /boot mount itself in the root's /boot but I don't know how to tell the system to do this on its own while booting without my assistance. I chrooted from the live cd which involved a lot of tedious stuff but basically the important stuff I did were:

grub-install /dev/sdb
update-grub
update-initramfs -u

P.S.I get the issue in the Subject of this topic by telling tune2fs to mark the external /boot, lvm / and /home partitions as "dirty."

View 2 Replies View Related

Debian Configuration :: Change The Automatic Fsck Execution At Boot Time To Be Above 30 Boots?

Aug 27, 2010

How can I change the automatic fsck execution at boot time to be above 30 boots? I reboot the system sometimes 3 to 4 times a day. Intel 3 GHz, tower, i386 lenny vmlinuz-2.6.31-686

View 2 Replies View Related

Debian Hardware :: Boot Warning Fsck.ext4: Unable To Resolve UUIDs?

May 15, 2011

I have $ uname -a
Linux kub 2.6.32-5-amd64 #1 SMP Mon Mar 7 21:35:22 UTC 2011 x86_64 GNU/Linux

Most of the time when I boot my PC I get an error about fsck.ext4: Unable to resolve... I don't know why it's happening.

The problem is happening with my external drive that has 3 partitions:
/dev/sdc1
/dev/sdc3
/dev/sdc2

About 90% of the time I boot I do get the error. Sometimes after getting the error I can login and the external drive (/dev/sdc) is already mounted:
$ df -H
Filesystem             Size   Used  Avail Use% Mounted on
/dev/sda2               15G   8.0G   5.8G  58% /
tmpfs                  1.9G      0   1.9G   0% /lib/init/rw
udev                   1.9G   246k   1.9G   1% /dev
tmpfs                  1.9G   738k   1.9G   1% /dev/shm
code....

The UUID's in the error file match the output of the command blkid. And the UID's of blkid match the fstab UUID's. I don't know what to do at this point.

View 2 Replies View Related

General :: Live CD With A Fsck.jfs On It

May 18, 2010

my root partition was corrupted after loss of power, so now my gentoo system won't boot. I need a Live CD that can fsck it back up, but ubuntu never boots on my machine.

View 2 Replies View Related

General :: Run Fsck On Root FS?

Nov 26, 2010

Can I do fsck on my root File system (/ ) from linux rescue on RHEL 5 ?

View 1 Replies View Related

General :: Fsck Error During Start Up?

May 25, 2010

I get an error during start-up

fsck failed. Please repair manually

If I Ctrl D to carry on everything boots up ok as far as I can tell.

If I try and fix:
# fsck /dev/hdb1
fsck 1.37
e2fsck 1.37
/dev/hdb1: clean, 38/7340032 files, 283481/1465320 blocks

[Code]....

View 14 Replies View Related

General :: How To Bypass FSCK At Reboot

Jul 23, 2010

I have a server that said a volume was dirty and to check it at reboot, so someone did a shutdown -rF now. Only problem is the other volumes are HUGE and it will take forever, which I cant have happen. The volume with the trouble is non-critical so I could take it offline and check it that way if i can get this to boot quickly. How can I do that if its going to auto check every volume on reboot now?

View 2 Replies View Related

General :: Boot Up Misbehavior After An Update During Fsck

Jun 25, 2011

Today I did an update on my Debian 6.0.0 installation, which included a kernel update. I also did an Nvidia driver update, afterward. All well, until upon a third boot up an fsck check was forced (34 mounts). Some odd behavior ensued. At about 19% it exited the check, printed what appeared to be a load of inode numbers with error messages, and "froze" with the caps lock and num lock lights on the keyboard flashing.I did a couple of grub recovery modes, each which advanced a little further, and all is well again. However, it concerned me. Where in var/log do I find the file of that particular fsck activity?

View 1 Replies View Related

General :: Unexpected Inconsistency Run FSCK Manually

Jun 8, 2011

RHEL 5.4. I'm facing the following error after rebooting the server:
/dev/VolGroup01/u04: UNEXPECTED INCONSISTENCY Run fsck Manually"
*** An error occurred during the file system check.
*** Dropping you to a shell: the system wil reboot
*** when you leave the shell.
give the root password for maintenance:

-Previously I performed a lvreduce command on a LV, after the lvreduce, I reboot the server.
-After login as root I run:
e2fsck -f /dev/VolGroup01/u04

But, it shows:
The filesystem size (according to the superblock) is 5218304 blocks
The physical size of the device is 1310720 blocks ...
either the superblock or the partition table is likely to be corrupt
abort<y>? no
pass 1: cheking inodes, blocks, and sizes
error reading block 1310722 (invalid argument) while doing inode scan
inore error <y>? y

-Additionally, trying to lvdisplay, it shows:
Locking type -1 initialization failed
I have no important data on that LV, but I can not boot the server properly.

View 4 Replies View Related

General :: Fsck And Manually Mounted Filesystems?

Nov 12, 2010

I want the filesystem of my external drive to be checked periodically after a numer of mounts. I put 2 in the sixth colums of fstab for this partition

Code:
/dev/sdb1/mnt/hdext3rw,dev,sync,user,noauto,exec,suid02
and I use the tune2fs to set the maximum mount count to 32.
Code:
tune2fs -c 32 /dev/sdb

now the mount count is 34 and the date of the last check is not recent, so apparently the auto fsck has not been performed. Probably because this partition is not mounted at start-up but I usually mount it manually.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved