General :: Can't Write To Raid On Fedora

Mar 17, 2010

I just did a fresh install of Fedora 11 and added Raid 1 following this tutorial: [URL]

Now I see the filesystem when I open 'Computer' in the GUI, and I open it and see 'lost+found', but i can't write to the drive. The option is simply greyed out. And when I view Properties on the drive and go to Permissions, it says 'The permissions of {driveid} could not be determined.'

View 1 Replies


ADVERTISEMENT

Fedora :: Can't Write To Raid On F?

Mar 17, 2010

I just did a fresh install of Fedora 11 and added Raid 1 following this tutorial:[URL].. Now I see the filesystem when I open 'Computer' in the GUI, and I open it and see 'lost+found', but i can't write to the drive. The option is simply greyed out. And when I view Properties on the drive and go to Permissions, it says 'The permissions of {driveid} could not be determined.'

View 12 Replies View Related

Red Hat / Fedora :: Cant Write To Raid - The Permissions Of - Driveid - Could Not Be Determined

Mar 19, 2010

I just did a fresh install of Fedora 11 and added Raid 1 for two additional drives during the install,

So, I have 3 drives. One with the OS, that I boot from. /dev/sdc

Then 2 others in a Raid 1 config, /dev/sda and /dev/sdb -- those are in /dev/md0

Everything with the system is fine. I can boot up, and everything runs great. So then I try to view the Raid and it looks ok when I open 'Computer'. it shows the main OS drive, and what looks like the 2000GB raid drive. So i open it and just see a 'lost+found' folder. Not surprising, b/c I haven't added anything to it. But when I right-click I can't create a folder b/c it's greyed out, I can't drop files in there, and when I get Properties on the drive itself it says 'The permissions of {driveid} could not be determined.'

View 1 Replies View Related

General :: Write (Through Or Back) Policy On RAID 1 / 10

Sep 2, 2009

I am trying to prepare my PowerEdge 2950 before CentOS 5.3 installation(web server). I have hardware RAID 1/10 so I will have 2 virtual disks(VD).
First VDRAID 1) - 2 physical disks
Second VDRAID 10) - 4 physical disks
What should be write policy for the VD(RAID 1) and for the VD(RAID 10)? I would have "/var" and maybe "/tmp" on RAID 10.

View 1 Replies View Related

Red Hat / Fedora :: Format For Server & RAID Setup For Multi Platform Read/write/access?

Jun 23, 2011

I'm looking to set up a server with attached mass storage device and tape autoloader to run linux. It's set up under Windows at the moment. Goal is to have users, connecting from individual workstations and laptops, backup their data to the linux server. On their personal machine, some users run linux, some MacOS, some Windows. I plan to set up the 5 500 GB drives as RAID5. I understand that if setting up as software raid the format is "physical volume for RAID". Under this setup, will Windows users be able to read/write and function as expected? I can't assume only linux user access.

View 3 Replies View Related

Server :: Software Raid 5 Write Performance

Nov 16, 2010

I wasn't sure where to post this question so administrators, feel free to move it.I have a media server I set up running Ubuntu 10.4 Server, and I set up a software raid 5 using 5 Western Digital Caviar Green 2TB 7200RPM 64MB drives. Individually they benchmark (using the Ubuntu's mdadm GUI (pali?somthing...) at about 100-120mb/s read write.I set the raid 5 up with a stripe size of 256kb, and then I waited the 20 hours it took to synchronize. My read speeds in raid are up to 480mb/s, but my write max is just under 60mb/s. I knew my write performance would be quite a bit lower than my read, but I was also expecting at least single drive performance. I have seen other people online with better results in software, but have been unable to achieve the results they have gotten.

My bonnie++ results are more or less identical (I used mkfs.ext4 and set the stride and stripe-width).The PC has 2048mb of RAM and a 2.93Ghz Dual Core Pentium (Core 2 Architecture), so I doubt think that's the bottle neck. These drives are on the P55 (P45*) South Bridge SATA controller.

View 7 Replies View Related

Debian :: No Write Access To RAID Partition Over Samba?

Aug 9, 2011

I have recently installed Debian on my NAS server. I have also configured Samba for sharing the home directory of a nas user i.e. /home/nas To this directory I have read/write from a windows machine using the nas user credentials. When I mount my RAID partition /dev/md0p1 to the /home/nas directory, I then realize that all content in this directory (files and subfolders) is only owned by the root user. When trying to access from the windows machine the /home/nas directory, I do not have any write access, only read. I have tried both the nas and the root user credentials.

I have also attempted the change the ownership of the mounted RAID partition to the nas user with the -R recursive option, but I get for the internal files/subfolders an error "operation not supported".

How can I overcome this problem? - Is there something not done properly in the /dev/md0 array definition (i.e. ARRAY /dev/md0 level=raid1 num-devices=2 UUID=bddf8b69:c97967b5:cb104784:7fef7cc3 )?- Is there something not done properly in the /dev/md0p1 mounting (i.e. mount /dev/md0p1 /home/nas)?- Should I do any extra configuration before the mounting etc? I would really appreciate any kind of help I could get.

Some background info

b) After OS boot, when I do a:
# cat /proc/mdstat,
I get:
Personalities : [raid1]
md0 : active (auto-read-only) raid1 sda1[0] sdb1[1]
4200896 blocks
unused devices: <none>

[Code]...

View 2 Replies View Related

Ubuntu Servers :: WRITE Performance Down On RAID 1 Array

Sep 7, 2010

I'm currently experiencing some serious issues with WRITE performance on a RAID-1 array. I'm running Ubuntu 10.04 64 bit server with the latest updates. To evaluate the performance ran the following test: [URL]... (great article btw!) Using dd to measure, write performance is only at 8.7 MB/s. Read is great though at 74.5 MB/s. The tests were ran straight after rebooting and I have not (YET!) done any kernel tuning or customization, running the default server package of the Ubuntu kernel. Here's the motherboard in the server: [URL]... with a beta bios to support drives over 300GB.

[code]...

As you can see from the bo column there is definitely something stalling. As per top output, the %wa (waiting for i/o) is always around %75 however as per above, writes are stalling. CPU is basically idle all the time. Hard drives are quite new and smartctl (smartmontools) does not detect any faults.

View 4 Replies View Related

Server :: Very Slow Raid Performance / Only Write Speed

Jan 5, 2011

I have recently migrated my file server over to a HP Microserver. The server has two 1TB disks, in a software RAID-1 array, using MDADM. When I migrated simply moved the mirrored disks over, from the old server Ubuntu 9.10 (server) to the new one 10.04.1 (server).I Have recently noticed that write speed to the RAID array is *VERY* slow. In the order of 1-2MB/s order of magnitude (more info below). Now obviously this is not optimal performance to say the least. I have checked a few things, CPU utilisation is not abnormal (<5%) nor is memory / swap. When I took a disk out and rebuilt the array, with only one disk (tried both) performance was as to be expected (write speed >~70MB/s) The read speed seems to be unaffected however!

I'm tempted to think that there is something funny going on with the storage subsystem, as copying from the single disk to the array is slower than creating a file from /dev/zero to the array using DD..Either way I can't try the array in another computer right now, so I though I was ask to see if people have seen anything like this!At the moment I'm not sure if it is something strange to do with having simply chucked the mirrored array into the new server, perhaps a different version of MDADM? I'm wondering if it's worth backing up and starting from scratch! Anyhow this has really got me scratching my head, and its a bit of a pain! Any help here would be awesome, e-cookies at the ready! Cheers

View 6 Replies View Related

Software :: RAID 5 With Even Number Of Drives Gives Bad Write Performance

Oct 27, 2010

So I have been doing some RAID 5 performance testing and am getting some bad write performance when configuring the RAID with an even number of drives. I'm running kernel 2.6.30 with software based RAID 5. This seems rather odd and doesn't make much since to me. For RAID 0 my performance consistently increases as I add more drives, but this is not the case for RAID 5. Does anyone know why I might be seeing lower performance when constructing my RAID 5 with 4 or 6 drives rather than 3 or 5?

View 2 Replies View Related

Ubuntu :: Slow Write Speeds On Mdadm RAID 5 Array

Mar 3, 2010

I have a 4 drive RAID 5 array set up using mdadm. The system is stored on a seperate physical disk outside of the array. When reading from the array its fast but when writing to the array its extremely slow, down to 20MB/Sec compared to 125MB/Sec reading. It does a bit then pauses, then writes a bit more and then pauses again and so on.The test i did was to copy a 5GB file from the RAID to another spare non-raid disk on the system average speed 126MB/s. Copying it back on to the RAID (in another folder) the speed was 20MB/s.The other thing is very slow several KB/s write speed copying from eSATA drive to the RAID.

View 9 Replies View Related

Fedora X86/64bit :: Use Fedora / Linux Raid Program To Manage Raid Array?

Jun 24, 2009

I've tried to install Fedora 11, both 32 and 64 on my main machine.It could not install as it stops on the first install window. I've already filed a bug but really haven't seen any feed back yet.The bug has something to do with Anaconda and the Raid array but I really can't tell.

I have an Intel Board (see signature). I am running intel raid software under W7 currently.It works fine. But, I'm wondering, when I attempt to install F!!, is my current raid set-up causing problems? Do I need to get rid of the intel raid software and use a Fedor/Linux raid program to manage the raid array??

View 2 Replies View Related

Fedora :: Erroneous Write During File Extend. Write -1 Instead Of 4096

Nov 17, 2009

Ive installed Gaussian '03 on fedora Core 10, but I'm unable to run it. It aborts and i get the following error

Code:

Erroneous write during file extend. write -1 instead of 4096
Probably out of disk space.
Write error in NtrExt1

View 3 Replies View Related

General :: Migrate An Installed Ubuntu System From A Software Raid To A Hardware Raid?

Jun 29, 2011

migrate an installed Ubuntu system from a software raid to a hardware raid on the same machine? how would you go about doing so?

View 1 Replies View Related

General :: Write A Shell Script Which Will Simultaneously Collect OS User Information And Write In An Individual Text Files?

Feb 17, 2010

I want to write a shell script which will simultaneously collect OS user information and write in an individual text files.Can anyone tell me the syntax of the script.N.B. The user name will be mentioned in an array within the shell script.

View 8 Replies View Related

Ubuntu Servers :: RAID-5 Recovery (spare/active) / Degraded And Can't Create Raid ,auto Stop Raid [md1]?

Feb 1, 2011

Could any RAID gurus kindly assist me on the following RAID-5 issue?I have an mdadm-created RAID5 array consisting of 4 discs. One of the discs was dropping out, so I decided to replace it. Somehow, this went terribly wrong and I succeeded in marking two of the drives as faulty, and the re-adding them as spare.

Now the array is (logically) no longer able to start:

mdadm: Not enough devices to start the array.Degraded and can't create RAID ,auto stop RAID [md1]

I was able to examine the disks though:

Code:
root@127.0.0.1:/etc# mdadm --examine /dev/sdb2
/dev/sdb2:
Magic : a92b4efc
Version : 00.90.00
code....

Code:
mdadm --create --assume-clean --level=5 --raid-devices=4 /dev/sda2 /dev/sdb2 /dev/sdc2 /dev/sdd2
As I don't want to ruin the maybe small chance I have left to rescue my data, I would like to hear the input of this wise community.

View 4 Replies View Related

General :: Fedora Raid Recovery On /dev/md1?

Feb 22, 2010

This is my first post on LinuxQuestions.org, so I hope I am posting this this in the right forum, and English is not my mother language, so I hope I made myself understandable. I have this small Poweredge 350 server with two 80GB IDE hard drives running Red Hat Fedora 5, with software Raid 1. Some months ago hda started to have unrecoverable I/O read errors for some blocks. I leaved it that way for some time then hdb also started having same kind of issues. I got new hard drives and replaced hdb first, but the problem is mdadm hasn't been able to recover the raid. I have three LINUX RAID partitions conforming the raid 1 between hda and hdb

/dev/md0
/dev/md1
/dev/md2

[code]....

So how can I force the raid to be recovered ignoring the hda errors, is there a way to recover this?

View 7 Replies View Related

General :: Make Raid 5 On Fedora Core 10?

Mar 20, 2010

i cant find any threds in this forum how to make raid 5 on fedora core 10 how to make 1?

View 1 Replies View Related

General :: Unable To Access Intel Fake RAID 1 Array In Fedora 14 After Reboot

Jan 6, 2011

1st I am relatively new to linux (but not to *nix). I have 4 disks assembled in the following intel ahci bios fake raid arrays:

2x320GB RAID1 - used for operating systems md126
2x1TB RAID1 - used for data md125

I have used the raid of size 320GB to install my operating system and the second raid I didn't even select during the installation of Fedora 14. After successful partitioning and installation of Fedora, I tried to make the second array available, it was possible to make it visible in linux with mdadm --assembe --scan , after that I created one maximum size partition and 1 maximum size ext4 filesystem in it. Mounted, and used it. After restart - a few I/O errors during boot regarding md125 + inability to mount the filesystem on it and dropped into repair shell. I commented the filesystem in fstab and it booted. To my surprise, the array was marked as "auto read only":

[Code]...

and the partition in it was not available as device special file in /dev:

[Code]...

View 1 Replies View Related

General :: Write In "login" In Fedora 11?

Feb 28, 2011

What do I write in "login" in Fedora 11?

View 3 Replies View Related

Ubuntu :: Mdadm Raid + GRUB = Not Booting - Error: Unsupported RAID Version: 0.91

Jul 18, 2011

I have a raid5 on 10 disk, 750gb and it have worked fine with grub for a long time with ubuntu 10.04 lts. A couple of days ago I added a disk to the raid, growd it and then resized it.. BUT, I started the resize-process on a terminal on another computer, and after some time my girlfriend powered down that computer!
So the resize process cancelled in the middle and i couldn't acess any of the HDDs so I rebooted the server.

Now the problem, the system is not booting up, simple black with a blinking line. Used a rescue CD to boot it up, finised the resize-process and the raid seems to be working fine so I tried to boot normal again. Same problem. Rescue cd, updated grub, got several errors: error: unsupported RAID version: 0.91. I have tried to purge grub, grub-pc, grub commmon, removed /boot/grub and installed grub again. Same problem.

I have tried to erased mbr (# dd if=/dev/null of=/dev/sdX bs=446 count=1) on sda (ide disk, system), sdb (sata, new raid disk). Same problem. Removed and reinstalled ubuntu 11.04 and is now getting error: no such device: (hdd id). Again tried to reinstall grub on both sda and sdb, no luck. update-grub is still generating error about raid id 0.91 and is back on a blinking line on normal boot. When you'r resizeing a raid MDADM changed the ID from 0.90 to 0.91 to prevent something that happend happened. But since I have completed the resize-process MDADM have indeed changed the ID back to 0.90 on all disks.

I have also tried to follow a howto on a similar problem with a patch on [URL] But I cant compile, various error about dpkg. So my problem is, I cant get grub to work. It just gives me a blinking line and unsupported RAID version: 0.91.

View 2 Replies View Related

Server :: How Long Does Hardware Raid Card (raid 1) Take To Mirror 1 TB Drive (500gb Used)

Mar 22, 2011

How long does hardware Raid card (raid 1, 2 drives)take to mirror a 1 TB drive (500gb used)?Is there a general rule of thumb for this?4 hours? 12 hours? 24 hours?

View 1 Replies View Related

CentOS 5 Hardware :: Connect A RAID Box To The Server Via LSI 8880EM2 RAID Controller

Aug 3, 2010

I am trying to connect a RAID Box to the server via LSI 8880EM2 RAID controller.The raid box is FUjitsu Externus DX60 with raid 1 configured.The server is Fujitsu Primergy SX300 S5 with LSI 8880EM2 RAID card.The external raid box is being recognised by the raid controllers bios.

The server runs CentOS 5.5 64bit. I have installed the megaraid_sas driver from LSI website and MegaCLI utility but CentOS still fails to see the box.MegaCLI utility, when launched from CentOS, recognises the raid box, CentOS does not(no mapping being created in /dev).

I have also tried to create a logical RAID0 HDD on one physical HDD(as seen by MegaCLI) with MegaCLI utility in CentOS.The result was success and the new logical drive could have been used, but when restarting the server, the controllers' bios fails with an error (not surprised(one logical RAID0 on one physical HDD)) and configuration is being erased.

Has anyone tried connecting 8880EM2 controller to a raid box with raid configured on the box, running it all under CentOS and what were the results.

View 3 Replies View Related

Hardware :: Mtrr: Type Mismatch For C0000000,10000000 Old: Write-back New: Write-combining?

Jan 31, 2011

solve the following problem...mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combiningThis i am getting many lines in DMESG.

View 10 Replies View Related

Ubuntu Installation :: Dual Boot - Win 7 And 10.10 On Raid 0 - No Raid Detect

Nov 26, 2010

I have installed Ubuntu on my m1530 since 8.04 and currently dual boot Win7 and 10.10. I would like to dual boot on my PC, but I have run into a problem. I am not a pro at Ubuntu, but this problem I can not solve by reading forums like I have in the past.

I realize this is a common problem, but I have noticed people having success.

I have a M4A87TD EVO MB with two Seagate drives in Raid 0. (The raid controller is a SB850 on that MB) I use the raid utility to create the raid drive that Windows7x64 uses. I have 2 partitions and 1 unused space. Partition 1 is Windows, partition 2 is for media, and the remaining unused space is for Ubuntu.

I am running ubuntu-10.10-desktop-amd64 off a Cruzer 16GB flash drive that was installed via Universal-USB-Installer-1.8.1.4.

My problem like so many others is that when I load into Ubuntu, gparted detects two separate hard drives instead of the raid. I read that this is because kpartx is not installed on 10.10. I then went in LiveCD mode and downloaded kpartx from Synaptic Manager. Gparted still reported two drives. I opened terminal and run a few commands with kpartx. I received an error. (Forgive me I didn't write it down, but I believe it said something about a communication error. I will try again later and see.)

Currently I am reflashing the Cruzer with a persistence of 4GB. I am not familiar with this process, but I understand that my LiveCD boot will save information I download to it. I decided to try this method because I was going to install kpartx and reboot to see if this made a difference.

I am looking for any suggestions on a different method or perhaps someone to tell me that the raid controller or some hardware isn't supported. I did install ubuntu-10.10-alternate-amd64 on my flash drive, but fail to get past detecting my CD-ROM drive since it's not plugged in. If this method is viable, I will plug it in. I also watched the ..... video were a guy creates Raid 0 with the alternated CD, but it wasn't a dual boot and didn't use a raid controller from a MB.

View 6 Replies View Related

Hardware :: RAID - Create RAID 1 Without Deleting Data?

Jul 18, 2009

how can I create RAID 1+0 using two drives (one is with data and second one is new). Is it possible to synchronize data drive with empty drive and create RAID 1+0 ?

View 3 Replies View Related

Fedora Installation :: Software RAID Under VirtualBox & Fedora 13 - INT18 Boot?

Sep 2, 2010

So I decided to build a server using two HDDs and after checking the net I decided to go with Software RAID.Before I mess around and go ahead and buy two 500 GB HDD, I decided to try it out first in virtual box.(my system is F13 64bit with 4GB)

I set up a virtual machine with 2 X 10GB HDD.Mount the live CD (f13 32bit).Run regular install > choose custom layout and do as follows: SDA & SDB will both have Software RAID 500 MB and another software RAID of about 9500 MB I will have md0 /boot (sda1 & sda2 = 500 MB) And another md0 having LVM group loaded with / + SWAP I choose to install boot loader on md0 the first time and I receive the following error when I boot from HDD: FATAL: INT18: BOOT FAILURE I tried installing boot loader on sda same thing.

View 2 Replies View Related

Fedora :: Mounting Windows Server08 From Fedora 8 With Read/write Permissions?

Oct 7, 2009

I have Fedora 8 and we just switched over from a Windows "File Server" to Windows Server 2008 (10.1.1.17). I updated my fstab file and now when I go onto the Windows folders, I can list and read files, even save them, but new files are always read only.

fstab file (some, without the asterisks):
//10.1.1.17/USERS/Jeff/fs /home/mriuser/Desktop/fs cifs rw,username=jsadino,password=**** 0 0

I've tried ntfs-3g, auto, ntfs, smb, some umask combinations, changing ownerships, changing permissions, everything I could think of, but still can't modify new files.

[root@localhost tmp10]# mkdir tmp2
[root@localhost tmp10]# cd tmp2
[root@localhost tmp2]# touch tmp
[root@localhost tmp2]# ls -l

[Code]...

View 3 Replies View Related

Fedora Servers :: Upgrade Fedora Release Keeping Raid 1 And Lvm?

Nov 13, 2010

I hope this is the right section, it looks like though. I have a small nas ( via artigo a2000 ) with 2 sata hd 1tb each with raid 1 and lvm on top configured and working great.


sda1 and sdb1 ==> md0 raid1 for /boot
sda2 and sdb2 ==> md1 raid1 for swap
sda3 and sdb3 ==> md2 raid1 as physical volume then volume group and lvs on top ( / is a logial volume of these )

I wish to upgrade the current fedora 12 32bit installation I have on it doing a fresh install. But because I have a lot of data on md2 ( 600GB worth ) which I don't want to copy across somewhere else first, I need to know how ( i am pretty sure i can ) to mount md2 during the installation. This way I can use the data I already have on it.

View 3 Replies View Related

Slackware :: Windows Raid-O Install Virtualbox, Will Slackware Install Raid-o Without Raid Driver?

Feb 28, 2011

If I have a windows installed in raid-0, then install virtualbox and install all my linux os,s to virtualbox will they be a raid-0 install without needing to install raid drivers?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved