General :: CD Not Found When Installing RHEL 5.4 On HP Proliant DL380 G3?

Mar 3, 2010

I've been asked by my boss to install RHEL 5.4 onto a HP Proliant DL380 G3 which we have here. Now I'm a total linux newbie but can figure my way around most things but this has got me stumped.

I have downloaded the RHEL 5.4 i386 DVD iso and burnt it OK. But when I boot from the CD in the server it doesn't recongise it. I put the DVD into any other server/PC and it boots fine. The server also boots fine from other CDs'DVDs?

Anyway, I thought I would try the boot.iso instead so I burnt this and the DL380 boots fine. I try the default install option, select country/keyboard layout/ select local CDROM as the install type and this is the problem now.

It ejects the boot CD so I put in the RHEL 5.4 DVD and it keeps saying:- the red hat enterprise linux server cd was not found in any of your cdrom drives I have reburnt the DVD and same problem. I have also tried creating a VM with the DVD and this boots and installs fine in VMWare so I know the DVD is good.

View 7 Replies


ADVERTISEMENT

General :: HP ProLiant DL380 + Debian Squeeze + Firmware-bnx2_0.28_all

Apr 2, 2011

I have a HP ProLiant DL380 server and I am trying to install Debian on it. I had an error that said dhcp config failed at the installation and Debian could not find my NIC. I've Googled it and found out that I need to install required Broadcom NIC drivers.

There are images that 3rd people have created but I don't want to use them as it will be a server.

Another way to install them is to download .deb package and install it from a removable media when asked.

So I went ahead and did an exper install mode and choose adding packages from a media so an option appeared for me to install stuff from removable media now.

Each time I choosed it, my flash drive's lights were blinking but then I was getting an error says this package can not be installet are you sure to instal non signed package.

I say yes at that stage but I still can not install and it says this is probably happening because of kernel version miss match.

I downloaded latest stable copy of debian from official debian site and downloading the stable squeeze copy of the driver from official Debian site too.[URL]..

View 1 Replies View Related

Ubuntu Servers :: Compaq Proliant DL380 G2 Refusing To Install 10.10

Mar 29, 2011

I have a Compaq server, as per the title, and I wish to install Ubuntu Server onto it but ran aground when I found it got to trying to run the installer after the CD Boot menu, it just stopped there, waited 180 seconds (as per the error's details) and then locked up with the Caps Lock & Scroll Lock lights on the keyboard flashing.

Now I know it's not the server, as I have installed other OSes onto it in the past, including an older version of Ubuntu server (9.04), I did try and re-install the 9.04 version but the CD I had was too scratched up and got to a point in the installer (copying files) where it just failed cos it couldn't read the disc.

The specs of the thing are:

Dual PentiumIIIs 1.4GHz
512mb RAM (keep meaning to upgrade it)
3x 18.2GB 10k SCSI HDDs (Storage)

[code]...

Not sure what else is in there, but the full specs are on the web...

View 8 Replies View Related

Server :: Debian On HP ProLiant DL380 - NIC Driver Installation - Firmware-bnx2

Apr 5, 2011

I have a HP ProLiant DL380 server and I am trying to install Debian on it.

I had an error that said dhcp configuration failed at the base installation and Debian found my NICs but asked for driver.

I've Googled it and found out that I need to install required Broadcom NetExtreme NIC drivers.

There are images that 3rd people have created but I don't want to use them as it will be a server.

Another way to install them is to download .deb package and install it from a removable media when asked.

So I went ahead and did an expert install mode and choosed adding packages from a media so an option appeared for me to install stuff from removable media now.

Each time I choose it, my flash drive's lights are blinking but then I am getting an error says this package can not be installed are you sure to install a non signed package.

I say yes at that stage but I still can't install and then it says this is probably happening because of kernel version miss match.

I downloaded latest stable copy of Debian and also downloaded the stable squeeze copy of the driver from official Debian site too. [url]

Is this a kernel mismatch between my Deb. version and the driver?

And after many try my server started hanging at detecting network hardware stage, how can I deal with this?

Also finally I started to get this...

[url]

Is this happening because I am using wrong architecture CD?

I have i386 image and my server has 2 x Pentium 3 processor.

View 1 Replies View Related

CentOS 5 Server :: Partitioning Hard On Hp Proliant Dl380 Doesn't Detect Hard Drive

Sep 11, 2010

I have been trying to install centos on my hp servers and when i get to partitions my hard drives the OS does not detect any harddrives. I have 4 scsi drives and i believe a intergrated smart array controller.

View 1 Replies View Related

CentOS 5 Hardware :: Install 5.4 On Compaq Proliant 6500 - No Disk Found?

Aug 28, 2010

I'm trying to install centos 5.4 on a older compaq proliant 6500 server with raid it was previously used for windows server 2003 for several years but management wants it turned into a time clock server that will run linux, obviously there is no smart start software for centos on this model, is there some kind of driver needed, be aware that i only did installations on single drive servers and new servers that take centos right away with new raid adapters compaq raid controller 3200.

View 10 Replies View Related

CentOS 5 Hardware :: Drive Not Found Error (HP Proliant Blade 460c G6)?

Sep 22, 2010

Im trying to install CACTI EZ on a HP Proliant Blade 460c G6. But im having problem with detecting the hard disk. CACTI EZ installation has the drivers for this and loads the driver itself. But when it now detects for the drive, it has the error "Drive not Found".Do you have bootable CD (iso image) that can load the drivers for Cent OS 5 for HP Proliant Blade 460c G6 server.

View 1 Replies View Related

General :: RHEL 6 - No Default Or UI Config Directive Found

Jan 4, 2011

I am trying install rhel 6 on my rhel 5. I have downloaded rhel6.0-20100715.2-server-i386-dvd1.iso (from redhat ftp site) and burned into dvd. After rebooting I pressed F12 and chose cd installation.

I get the following message on my screen.
"ISOLINUX 3.86 2010-04-01 ETCO Copyright (C) 1994-2010 H.Peter Anvin et al
No DEFAULT or UI configuration directive found!
boot: "

View 5 Replies View Related

Ubuntu Servers :: Installing 10.04 On Proliant 3000?

Jun 26, 2010

I got my hands on my first real server hardware yesterday - a PIII 600 MHz COMPAQ Proliant 3000 with 1.8 GB RAM, Smart Array 3200 controller and 4x18.2GB SCSI ULTRA 3 hard drives. RAM is upgraded from original and USB card added - otherwise hardware arrangement appears to be original.

Minimal 10.04 installed (35 minutes boot to boot) as Server 10.04 could not detect CD drive. My problem? Everything works but it does not look right. Probably my bigger problem?? I know almost nothing about RAID and the more I read the more ethereal my understanding seems to become.

When installing, I chose to install with LVM on c0d0. Grub written to MBR. I have posted df -l, fdisk -l and lshw output below. Would someone tell me if this looks correct and, possibly, offer some pointers if it does not.

Code]...

View 1 Replies View Related

Ubuntu Servers :: Installing 10.04 On A HP Proliant DL180 G6?

Nov 2, 2010

installing Ubuntu 10.04 on a HP Proliant DL180 G6, especially via the LO100 virtual KVM? I can boot almost any linux distro with it, but unfortunately whenever I boot the Ubuntu server cd the screen gets garbled. I did some searching on the net, and found some references to older versions of Ubuntu where one had to add vga=771 to the boot options, but this still doesn't work with 10.04. I tried several vga modes, all to no avail (with vga=normal the screen gets garbled, with anything else the screen just stays black). Anyone got any idea on how to fix this?

View 1 Replies View Related

Software :: Unable To Boot To RHEL 4 32bit After Installing RHEL 64bit - Error 13: Invalid Or Unsupported Executable Format

Apr 27, 2009

I have 4 partitions in my system, out of which two(sda1, sda2) have windows on them. I have installed RHEL 4 32 - bit on sda3 and after that , installed installed RHEL 64-bit on to a partition sda 5. Now i am unable to boot into RHEL 32-bit. The error i am getting is Error 13: Invalid or unsupported executable format.

View 1 Replies View Related

Ubuntu Servers :: Installing HP Support Apps On Proliant ML370 G3?

Jun 1, 2011

I acquired an old ML370 Proliant server, and I'm attempting to find a way to control the fan speed, as all three noisy fans are running at full blast, and I had planned to keep this thing in the office, because it has no wireless capability or support.

I know the following:HP has a suite of programs that are variously called Insight Control Manager, Server Health driver, HP-health, hpasm, and a few more I can't remember. Obviously these are different iterations of the same program, but I have been unable to determine which one I need, and I've been completely unable to find a way to install any of them or find the repository that contains them.

The website: Download Drivers and SoftwareIt lists a lot of different Enterprise-class Server OSes, but nothing about Ubuntu or any home server OSes. I've only been at this for a week, so I don't know which of these would work with Ubuntu Server, or how to make them work if their aptitude file extension is not .deb. I'm currently running Server version 10.10, as 11.04 gave me monitor troubles.

View 2 Replies View Related

General :: Unable To Get GUI After Installing RHEL 5.0

Mar 10, 2010

I am not getting GUI in after installtion RHEL 5.0

My Mother board: Mercury
Model no1845 gcm
Moniter :LG 15''

View 1 Replies View Related

General :: Installing TORA On RHEL 5 64 Bit

Jul 16, 2011

I am looking for TORA software and installation steps to download and install on RHEL 5 64 bit.

Can some one point me to correct URL to download the same and share the steps installation steps.

View 2 Replies View Related

General :: Installing Nagios-3.2 In Rhel 5?

Dec 16, 2010

i am installing nagios-3.2 in rhel 5 . it show the errors in make all command..

Quote:
[root@ns1 nagios-3.2.3]# make all
cd ./base && make
make[1]: Entering directory `/root/Desktop/nagios-3.2.3/base'
gcc -g -O2 -DHAVE_CONFIG_H -DNSCORE -o nagios nagios.c broker.o nebmods.o checks.o config.o commands.o events.o flapping.o logging.o macros-base.o netutils.o notifications.o sehandlers.o skiplist.o utils.o retention-base.o xretention-base.o comments-base.o xcomments-base.o objects-base.o xobjects-base.o statusdata-base.o xstatusdata-base.o

[Code]...

View 1 Replies View Related

General :: Installing A New Kernel From Source On RHEL 5

Aug 2, 2011

how to upgrade or install a updated kernel version (3.0).I am using RHEL 5 with kernel 2.6.18-8.I am trying to upgrade through source downloaded at [URL.Also will it be a good practice to upgrade the existing kernel?

View 3 Replies View Related

General :: Installing Additional Filesystems In RHEL?

Jul 12, 2011

We are about to install some RHEL5 servers for DB and web and Application servers. I've been asked to test which file systems of the following work better for disk I/O.EXT3 EXT4 JFS BtrFS and any other ones that I can find that work under RHEL the out-of-box install I have done allows me to format my volumes with EXT2/3 but not ext4 or any others. Is it possible to "install" other filesystems for use, if so how?

View 4 Replies View Related

General :: Find The Installation Number After Installing RHEL?

May 16, 2010

During the installation of RHEL it asks that you may enter the installation number to get packages , updates .....etc, now my server is up and running and i need to get the number that I added during installation

View 2 Replies View Related

General :: Installing Graphical Mode Of RHEL 5 On Virtual Software

Apr 24, 2010

Problem installing graphical mode of red hat 5 on virtual software. But text mode is getting installed but its also taking more then 1hr. I've adjusted all the recommended options regarding memory,hard disk ,etc. Also please suggest me good virtual software for red hat enterprise Linux 5.

View 5 Replies View Related

General :: What Is Kernel Version Required For Installing NFS4 (RHEL)

May 5, 2011

What is the kernel version required for installing NFS4 (RHEL) ??

View 1 Replies View Related

General :: Installing GCC On SUSE 10 Says Cc Not Found

Feb 10, 2011

I wanted to package my software as an RPM by rpmbuild command. When I run that it complained that gcc not found.

I downloaded gcc and tried to install that from a tar ball. And it complained about cc: coomand not found. I dont know why is this error being shown because I think cc and gcc are the same. Correct me if I am wrong. My system details are:

I tried to download rpm files for gcc but they dont exist for Suse 10.

View 7 Replies View Related

General :: Error Installing Rails 3.0.1 (File Not Found)

Feb 17, 2011

I am trying to install rails 3.0.1 on ubuntu 10.10. I am getting this error towards the end when i execute this command sudo gem install rails --version 3.0.1.

View 1 Replies View Related

General :: No Acceptable C Compiler Found In Ubuntu 10.04 When Installing Vlc

Oct 11, 2010

no acceptable c-compilier found when installing vlc offline. mozzilla can't connect to internet but I can ping my server

View 3 Replies View Related

General :: Installing Ns3.6 - Components Not Found Specially Pybindgen

Jan 9, 2010

actually during the installation of ns 3.6, with the following command ./waf -d debug configure i get some components not found specially pybindgen i have downloaded it but cant install it and bind it with ns

View 8 Replies View Related

General :: SLES 11.0 - No XML Parser Found When Installing Neon

Jul 12, 2011

I'm trying to install neon so that I can install SVN in order to try to install a Web Page Replay server.

When I run the command:

I get the following error:

I was able to install apr and apr-util and believe it also requires an XML parser so perhaps this is just an issue of pointing neon to the XML parser?

View 6 Replies View Related

General :: Software Updates Not Installing - Repository Not Found

Nov 16, 2010

I installed Fedora 12 and it said 500 software updates available. When I tried to install them I got this error message:

Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module> main()
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main backend.dispatcher(sys.argv[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 710, in dispatcher self.dispatch_command(args[0], args[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 657, in dispatch_command self.update_packages(only_trusted, package_ids)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1948, in update_packages signed = self._is_package_repo_signed(pkg)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1437, in _is_package_repo_signed repo = self.yumbase.repos.getRepo(pkg.repoid)
File : /usr/lib/python2.6/site-packages/yum/repos.py, line 121, in getRepo 'Error getting repository data for $s, repository not found' $ (repoid)

View 4 Replies View Related

Red Hat / Fedora :: MySQL And RHEL 5.3 - Command Not Found

May 24, 2010

Currently I'm using RHEL 5.3 in my server. Last time I install MySQl Server and it working fine.Then i facing a problem with my server and i reinstall back RHEL. But i didnt use MySql package inside the CD to install MySQL. i install MySQl separately. I download from MySql website. My problem is, i success install MySql in my server. The service also running. But when i type.

mysql -u root password

it said, command not found.

View 4 Replies View Related

Red Hat :: RHEL AS4 Not Booting Up - Volume Group Not Found

Jan 18, 2010

I have run into some serious problems trying to start up RHEL AS4. I am trying to install Oracle on this box which by the way is running as a guest OS through VirtualBox. I was running with it fine yesterday. I was doing the prerequisites of updating the /etc/sysctl.conf file with additional kernel parameters. Prior to that I added another scsi virtual disk and extended a PV and left it at that for the night. I am since come back today and trying booting and am getting the following errors:

Volume group "VolGroup00" not found;
Couldn't find all physical volumes for volume group VolGroup00;
Couldn't find device with UUID "Some UUID of the device";
ERROR: /bin/lvm exited abnormally! (pid 318);
mount: error 6 mounting ext3;
mount: error 2 mounting none;
switchroot: mount failed: 22
umount /initrd/dev failed: Z
kernel panic - not syncing: Attempted to kill init!

I have tried running in rescue mode and it can find volume group VolGroup00. I also have installed Storage Foundation which includes veritas volume manager and other various veritas components. Does anyone have a clue what I am supposed to do here to get RHEL up and running again? I am running kernel version 2.6.9-42.EL if that helps as well.

View 3 Replies View Related

General :: Skype And Installing Libraries / Packages - 'GLIBCXX_3.4.9' Not Found

Oct 15, 2010

I've got an Aspire one Linpus Linux Lite and I have a problem installing Skype. When I tried to run Skype after downloading I got the following:

skype: /usr/lib/libstdc++.so.6: version 'GLIBCXX_3.4.9' not found (Required by Skype)

In the terminal window I typed the following: rpm -q glibc And got glibc-2.9-2 How do I install the required packages/libraries?

View 2 Replies View Related

General :: Installing Ffmpeg And Gcc - Error: No Acceptable C Compiler Found In $PATH

Jan 17, 2010

I am running a server which is hosting a site where members can upload videoclips. I noticed that upon upload a thumbnail is not created for the videoclip. I found out that ffmpeg needed to be properly installed and in my case ffmpeg-php as the site runs on php. So far so good. I followed the instructions found somewhere to install ffmpeg-php but stall at the command: dot slash configure && make The error I get is:

checking for egrep... grep -E
checking for a sed that does not truncate output... slash slash bin slash sed
checking for gcc... no
checking for cc... no
checking for cc... no
checking for cl... no
configure: error: no acceptable C compiler found in $PATH

I presume it's because gcc is missing. how I can start tackling the problem and ultimately get gcc running so I can install the ffmpeg? I am really sorry I was hoping to elaborate a bit more but I get an error: You are only allowed to post URLs to other sites after you have made 15 posts or more. so I guess I need to wait and describe it differently.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved