General :: Bluetooth Mouse Connects But Not Recognized

Feb 19, 2011

I'm running Debian squeeze on a Fujitsu Lifebook AH550 under kernel revision 2.6.37. For the most part, everything is good, but I can't get my Verbatim Bluetooth mouse (model 96991) to work. It's fine with the Debian 2.6.32 kernel, so I know that the hardware is recognized and any required configuration files are in place. I've evidently missed some kernel configuration parameter, unless perhaps some driver has changed since 2.6.32 which renders my mouse incompatible.If I run bluetooth-properties, I can see that a mouse is configured. I've tried removing that device and adding a new device. The mouse is found immediately, and, according to the dialog, is configured successfully.

View 7 Replies


General :: Bluetooth: Phone Recognized, But Nothing Gets Done?

Mar 17, 2010

How do I get basic bluetooth stuff working? Put in USB dongle and it was automatically recognised:

ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)

The hcitool scan command works to give the name of the phone and its address thing:

hcitool scan

But although when I operate the mobile, cell phone to "Browse files" in the bluetooth menu the computer puts up a bubble saying 'connected' the phone say: 'Connecting fail'.

View 2 Replies View Related

Fedora :: Launch Script When Bluetooth Device Connects?

Aug 4, 2010

When a bluetooth controller I have connects I'd like a program launched (qjoypad) so that I can use it has a mouse. The controller has to be on before launching qjoypad otherwise qjoypad will not work.

So I was wondering if there is a way to launch a script when my controller connects, and then possibly when it disconnects to launch another script killing the qjoypad process.

EDIT: I created a script that checks if /dev/input/js0 exists, if it does then qjoypad is created

while true; do
if [ -c "/dev/input/js0" ]; then


View 2 Replies View Related

General :: Rocketfish Bluetooth Mouse Takes Two Clicks To Work - Set It To One Click?

Feb 21, 2010

I had to change batteries on Rocketfish bluetooth mouse. The mouse re-installed fine, but when I use the mouse I have to double-click to make it work. How can I change it to work on one click?

View 1 Replies View Related

Ubuntu :: Bluetooth Chipset Not Recognized Under 10.04?

May 19, 2010

I own a Toshiba Satellite P300-19F laptop equipped with an onboard bluetooth chipset. Under Windows I can use the bluetooth technology flawlessly. Unfortunately, Ubuntu Lucid Linx does not recognize my BT chipset. Is there a way to use the windows driver as ndiswrapper does with wifi drivers?

View 1 Replies View Related

CentOS 5 Hardware :: Bluetooth Adapter Not Recognized?

May 25, 2011

I have a bluetooth adapter, but the operating system (CentOS 5.5) doesn't seem to recognize it.

[claudiu@localhost lib]$ /sbin/lsusb
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
[claudiu@localhost lib]$ uname -a
Linux localhost.localdomain 2.6.18-194.el5 #1 SMP Fri Apr 2 14:58:14 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux

View 3 Replies View Related

Hardware :: Bluetooth Breaks After Using Mouse In Other OS

Oct 17, 2010

If I use my bluetooth apple Mighty Mouse in a LiveCD of Ubuntu, or in mac OSX, when I next boot linux from disk, the mouse won't connect to it. I do not know if it is something about the mouse that is changing or if it is something on the linux side. This has just happened to me again, and I am sure that the mouse was working before.

View 2 Replies View Related

OpenSUSE Hardware :: Cannot Setup The Bluetooth Mouse

May 18, 2010

I've just set up dual boot Win 7 with openSUSE 11.2 but unfortunately I have run into a couple of problems. One of them is that I cannot set up my Bluetooth mouse, which works under windows.

I am typing this from Windows right now (wireless is not working either) so I cannot reproduce the exact steps but anyways, when I try to add a new Bluetooth device it first finds my mouse, and keeps searching, and then removes the mouse from the list, and keeps searching, then it finds it again, ... and it goes endlessly. If I select mouse on the list and click forward on the next screen I get an error saying that the mouse was not set up.

View 4 Replies View Related

Ubuntu :: Attach Dell Bluetooth Mouse ?

Oct 17, 2010

How to attach dell bluetooth mouse in ubuntu?

View 1 Replies View Related

Ubuntu :: Bluetooth Mouse Does Not Move The Pointer

Jan 26, 2011

I have an issue with a bluetooth mouse. The mouse connects with the pc normally, and the bluetooth manager reports that the bluetooth device sends data. However, the mouse does not move the pointer, or seems to do any kind of effect on the pc.

View 1 Replies View Related

Ubuntu :: Bluetooth Keyboard/mouse At Startup

Feb 27, 2011

I have a MS bluethooth keyboard/mouse, and a USB bluetooth dongle

In 10.1 I can add both with no problems - but I have to explicitly tell ubuntu to connect to the devices at each machine reboot, which means plugging in a wired mouse first

Does anyone know how I can set the machine to connect automatically at every startup to both my keyboard and my mouse? I found a set of instructions here:


But it is from 2007 and I'm not sure its still correct?

View 2 Replies View Related

Ubuntu :: Bluetooth Mouse Not Working After Upgrading To 11.04?

May 4, 2011

I've just upgraded my Ubuntu installation to 11.04 and my bluetooth mouse (Logitech Bluetooth Laser Travel Mouse) is not correctly recognized at start-up. Every time I restart my computer I have to run the following commands in a terminal


sudo killall bluetoothd
sudo bluetoothd

and then remove and set up the bluetooth mouse (using an auxiliary USB mouse, of course ) through the bluetooth preferences to carry out the remove/set-up process using a non-interactive shell script?

View 6 Replies View Related

Hardware :: Bluetooth Mouse With Already Running Xorg

Sep 26, 2010

How do I have Xorg recognize a freshly connected bluetooth mouse after X is already running. It is in my ServerLayout section, but sometimes is not connected at boot.

View 6 Replies View Related

Software :: Kernel Will Not Allow Authentication With Bluetooth Mouse

Oct 3, 2010

I have bluetoothd, hidd, and bluez-simple-agent running. I click my mouse, and bluez-simple-agent never asks to authenticate or for a PIN. Before, bluez was working for me. It broke when I paired my mouse to a LiveCD session of Ubuntu Lucid Lynx.using bluez 4.71

View 3 Replies View Related

Ubuntu :: Bluetooth Keyboard / Mouse Not Working

Jul 18, 2011

I have a laptop. . .Dell 1150. Ubuntu installed, bluetooth device installed and my bluetooth keyboard and mouse works like a charm. I decided to load up my same exact Ibuntu on my desktop, use the same keyboard on it, and the mouse too. I tested it on the laptop, just in case it would not work in Ibuntu, and I didn't want to wipe out my Windows XP on my desktop and find out Ibuntu would not work on it with a wireless keyboard. Since it worked very well with my laptop, I figured it would work just as good with my desktop. I wiped my desktop out, and installed Ibuntu. Everything worked fantastic. Until I tried to install the bluetooth.

When I plug in my Bluetooth device, Ibuntu finds it and asks to set up your device. I attempt to set up my keyboard/mouse combo and it asks for a 6 digit code (like it is supposed to). I enter the code and press enter. From here, the problem starts. Ubuntu "claims" to connect to the keyboard, shows it connected, but my keyboard does not work at all. Neither does the mouse that is built into the keyboard. I type and nothing happens. This also brings up (sometimes) another message that says my keyboard is trying to connect to the bluetooth device please enter keyboard PIN. Well.

I can't enter anything, because the keyboard does not work! The mouse does not work! I can (without any problems) disconnect and connect to my laptop, but I can't do this to my desktop. Both are dell units. Desktop is about 3 years old, laptop is about 8 years old. Both running Ubuntu, the latest version. Both recognize the bluetooth transceiver. I have tried different USB ports on the desktop with no avail. I would really like to use my desktop as a unit to my TV with a wireless keyboard, not my laptop. It is much faster, more memory, and I can use the TV as a monitor.

View 2 Replies View Related

Hardware :: Old-styled Mouse Not Recognized By The GUI

Apr 2, 2010

GNU/Linux kernel 2.6
Slackware 12.0
KDE 3.5.7

In my machine and in its rear panel there is a DB9 male connector, it being the only DB9 connector anywhere in the machine. My mouse is pluged into that connector (old-styled mouse; newer mice end in a mini din conector (PS/2 mice)).

Up to here the conditions. The problem is when I boot certain non-linux operating systems on this machine the o.s. is aware of the mouse but, if linux is the o.s. running, it is the same as if the mouse does not
exist (assuming I am in the GUI). What can probably be the cause?

Maybe the configuration file for the X server is where I should look at. I regret not being able to specify who is the graphics server (something like XFree86?).

View 2 Replies View Related

Debian :: Bluetooth Mouse Doesn't Work In Wheezy

Aug 3, 2011

I was in 2.6.38.-2-amd64 and it was upgraded to 2.6.39-2-amd64. After the upgrade, every reboot disables the bluetooth mouse. There is a message from the panel with a bluetooth icon
Bluetooth Device
Authorization request from Logitec mouse...
check authorization

I push the buttons on my mouse and the button on the dongle to try and get them to pair, but, the dongle does not work. It is not scanning when I push the connect button.I unplug the usb dongle, and plug it in again, and this time I am able to pair them, and the mouse works. But, I have to do this every time I reboot which is a pain. I found that in the previous kernel, The Bloothtooh package is 4.91-1, but it has been upgrade to 4.91-2. So, this is creating the problem.

View 14 Replies View Related

Fedora Networking :: F15 Bluetooth (mouse/keyboard) Are Not Working?

Jun 1, 2011

After upgrading F14 -> F15 bluetooth (mouse/keyboard) are not working. With F14 there was no problems.

lsusb gives:

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


View 7 Replies View Related

Ubuntu Installation :: 10.04 - Cannot Detect Bluetooth Keyboard And Mouse

Apr 30, 2010

I tried to do a clean install of Ubuntu 10.04, but when I get to the screen if I want to test or install Ubuntu, the keyboard and mouse (bluetooth) don't work. I tried to resync the peripherals, I disconnected usb connector base of the tower and putting it back but nothing works for me. I have a Logitech Desktop MX 5000 (Bluetooth).

View 9 Replies View Related

Ubuntu :: 10.04 Bluetooth Mouse Scroll Wheel Not Working?

May 27, 2010

I'm working with Ubuntu 10.04 x64 + Asus 1201N + Media-Tech MD1083 RELOADED bluetooth mouse. Gnome Bluetooth Applet has setup mouse perfectly except scrolling. Even back&forward buttons seem to work fine but the scroll wheel does not work at all.

In "xev" I can see that scrolling does not produce any events.

View 2 Replies View Related

Ubuntu Networking :: Bluetooth Mouse Does Not Auto-connect

Feb 5, 2011

Im using a Samsung R420/R470 laptop with Broadcom bluetooth and a Prolink PMO624B mouse.My mouse works when I add it as a new device, but if I off the mouse and on it again, the mouse does not auto connect. I have to press and hold the connection button under the mouse and reconnect to the mouse.The mouse says that it is linux compatible, so I guess its a problem with my bluetooth drivers.

View 3 Replies View Related

Ubuntu :: Bluetooth Keyboard And Mouse Not Working After Inactivity?

May 28, 2011

I've paired a bluetooth keyboard and mouse with my machine using the Gnome bluetooth wizard and the keyboard and mouse work fine. Then, if I let the computer sit for a few hours and then try to use the keyboard or mouse, nothing happens. When paired with my windows machine, and I start using the keyboard and mouse after a hour or two, the keyboard takes a second or two to start working again. I suspect that it turns itself off, and then has to reconnect, and that in Linux, the reconnection isn't working properly. I've found other instances on the forums of people with the same symptoms, but never any clear answers. Does anyone know what's going on?

View 1 Replies View Related

CentOS 5 Hardware :: Configuring The Touchpad And Bluetooth-mouse?

Jun 30, 2011

I've installed CentOS 5.6 to my laptop, primarily to use some simulation programs. With much help of google I'm getting my hardware and software to work quite well, but I still have some troubles.My first problem is my Synaptics-Touchpad. It is extremely sensitive and I am not able to scroll. Is there any application which allows me to configure it properly? Before CentOS, I've tried openSUSE 11.4, where there was an application especially for configuring synaptics touchpad (dont't remember the name though). In general, the "feeling" of the touchpad was way much better under openSUSE, but I can't define that properly. I have a bluetooth mouse (Dicota Blue Light) conntected to my laptop, which is working fine except for the scroll wheel, which doesn't work at all. How can I activate it?

View 3 Replies View Related

Ubuntu :: Mouse And Keyboard Not Recognized On Startup?

Dec 4, 2010

Sometimes when I reboot, I go to log on only to find that the mouse won't move and the keyboard does nothing. Well, the mouse moves, it's not glued to the desk or anything. But it doesn't move the cursor. The first few times this happened, I found that it was a music player or other USB device plugged in that somehow created confusion or something. So if I unplugged them and booted up again, everything was fine. And by booting up again, I mean I have to hold down the power button and forcibly shut the thing off, since I obviously can't do it the nice way with no mouse or keyboard.

Anyway, it's been doing it now more often, even with nothing plugged into the front USB ports. But I have found that if I disconnect my external hard drive, it boots up fine again. But that's obnoxious, because that hard drive is online as much as the computer itself, because it's my main repository for files. So I have to unplug the USB from the back of it, hold the cable so it doesn't fall behind the desk, turn on the computer, and then log in one-handed while I hold the cable (because if I just plug it back in before the desktop shows, it doesn't mount properly).

And I know it's an Ubuntu thing rather than a general computer thing because the bios options work just fine. In fact, the little NumLock light is on until the moment that Ubuntu starts up and shows the login dialog.

View 1 Replies View Related

Debian Hardware :: Failure To Pair Bluetooth Mouse In Squeeze

May 9, 2011

I recently upgraded this machine from Ubuntu Maverick 10.10 to Debian Squeeze, x86_64, by wiping the root partition (I kept my backup and my home partitions). Everything has gone OK except this: for whatever reason I cannot pair my Microsoft Bluetooth Notebook Mouse 5000 with this machine any longer. In bluetooth-applet I can see the mouse when I go to pair it with the machine, but it simply times out and the pairing fails.

The target mouse definitely used to work in Ubuntu, so I doubt it's a problem in the physical layer. I tried another Bluetooth mouse (a Rocketfish/BestBuy POS), and it doesn't pair either. The Microsoft mouse I would like to use pairs just fine with my Debian squeeze laptop, but they're not using identical Bluetooth adapters as far as I can tell. lsusb reports that I've got a Broadcom BCM2210 in my workstation (the subject of this post), and lsusb on my laptop reports some kind of Broadcom Bluetooth adapter, but doesn't report its chipset.I'd really like to stay on squeeze if possible, but my googling for this has only led me to old documentation, or stuff that applies to wheezy or sid.

View 4 Replies View Related

Fedora :: F14 Bluetooth Mouse Won't Auto Connect After Suspend / Resume?

Dec 11, 2010

I'm running Gnome with the bluetooth applet and I have to explicitly use the applet, select the mouse and tell it to connect. It automatically connects just fine when I boot into windows.

I have the same problem with both a Microsoft bluetooth mouse 5000 and a "BLUETOOTH HID v1.02 Mouse [Interlink Bluetooth Mouse]".

View 4 Replies View Related

Ubuntu Networking :: Logitech Bluetooth Keyboard / Mouse - Parried?

Mar 21, 2010

i'm using a logitech dinovo keyboard/mouse and was trying to figure out if the device is still in boot mode. I don't see the usb hub listed when i hciconfig and i although the udev rules appear to hid2hci, i cant seem to figure out how in the heck i could be paired when i've never went through the process.. lsusb also shows "boot interface subclass" which im guessing means its in bootmode? Im obviously concerned about this because bootmode isnt encrypted.


View 2 Replies View Related

Debian Hardware :: Touchpad Recognized As PS/2 Generic Mouse

Apr 14, 2014

Debian seems to recognize me touchpad as PS/2 Generic Mouse so tapping works but I don't have touchpad in system preferences and two fingers scrolling doesn't work as well as two fingers zoom. Notebook is Samsung 530u3c. I give you some info about my system down below.

uname -a
Code: Select allLinux debian 3.2.0-4-amd64 #1 SMP Debian 3.2.54-2 x86_64 GNU/Linux

lspciCode: Select all00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)

[Code] .....

View 0 Replies View Related

Debian Hardware :: Characters Randomly Written When Bluetooth Mouse Is Paired

Nov 16, 2014

I have an ASUS Zenbook UX31E with Debian testing and LXDE as a Desktop environment. I have a Logitech T630 Mouse that I connect through Bluetooth. When the mouse is paired I can use it properly but I get random keys typed in my desktop such as "1", "2" or "/".I am a regular user of Debian, and I have being using the system for several years now even worked as sysadmin for sometime. However I do not have much knowledge about Bluetooth devices management. I found no information on this issue on the internet and I do not know where too look for more info on my own system. Here is some info I got:

Code: Select all:~$ hciconfig -a hci0
hci0:   Type: BR/EDR  Bus: USB
        BD Address: 74:2F:68:CC:5C:74  ACL MTU: 1022:8  SCO MTU: 183:5
        RX bytes:606 acl:0 sco:0 events:36 errors:0
        TX bytes:939 acl:0 sco:0 commands:36 errors:0

I have tested "blueman-applet" and "bluedevil" as desktops applets and pairing through console gives same results, so it seems like a problem with the bluetooth communication.

View 0 Replies View Related

Hardware :: Mouse Pointer No Longer Moves After Attempted Install Of Bluetooth?

Jul 21, 2010

I am using Ubuntu 10.04 on a laptop with a Synaptics touchpad. While testing an install of Bluetooth drivers I booted my computer into recovery mode so I could find out if Bluetooth worked before networking was installed. The system reconfigured the graphics to low VGA which disabled the mouse. I rebooted (normal startup) uninstalled the bluetooth drivers, but my mouse still won't work. The mouse pointer appears in the middle of the computer screen, and stays there.Enabling mouse keys support enables me to move the mouse by holding the Function key and pressing numpad characters,t this is only a temporary solution.

View 2 Replies View Related

Copyrights 2005-15, All rights reserved