General :: Any Way To Point Apache To IP Address?

Apr 4, 2011

I want to point my apache to ip address. Before this I point it to my /var/www/spec and I want to change it to ip address. So that when I enter my ip address my script code will appear.

View 1 Replies


ADVERTISEMENT

General :: Point Domain To Server With A Static IP Address?

Sep 4, 2010

I am trying to point my domain to my server with a static IP address. My domain is registered with Network Solutions and they ask "Primary and Secondary DNS" settings in their setup. What primary and secondary DNS settings I need to give when I have a dedicated server with static single IP address with BIND installed.

View 1 Replies View Related

General :: Apache Default Page Not Opening Using Ip Address

Oct 25, 2009

i have installed fedora 11..when iam opening my apache default test page using
http://localhost its opening but when iam trying to open the same using my ip address i.e. http://172.31.73.4 its not opening..instead iam gettin an error message like this in firefox

ERROR
The requested URL could not be retrieved....While trying to retrieve the URL: http://172.31.73.4/can anyone tell me whats the problem because till now i was using fedora 8 and while using apache i never got this sort of problem..

View 1 Replies View Related

Networking :: Public Ip Address Isp Gives Point Back To Box?

Jun 13, 2011

I want to do some basic web hosting, mainly for the experience. I have verizon fios for my isp, and what i am wondering is can i have the public ip address that they give me when i connect out to the internet point back to my linux box?

The reason that i am asking this is because i want to register a .com and i would like to have that point back to my linux box, i have looked at a few services and it seems that godaddy.com will do this and they seem to be the best choice. Before i register the .com i turnd on my httpd server but i am not sure how to get the public ip point back to my box...?

I have been doing some research and i am learning about things such as

ddclient
openvpn
port forwarding
nat
dynamic dns

Verizon fios like most isp's uses a dhcp connection meaning that the public ip address i get will change 1-2 a year. What i don't know is how can i setup my network at home preferably with iptables to have that public ip routed back to my linux box at home? I am using fedora 15 for those that are wondering...

Also when i enabled port forwarding and started my web server and tried loading http://mypublicipaddress in firefox i am directed to a verizon page with a login and password prompt.

I am aware that i will need to get certain information from my isp to have their public ip address routed back to my linux box but i am unware of what to ask them...?

If anyone here can tell me the following i will be so happy because it seems like a lot to hosting at home but i really want to learn...

here is what i need to know?

1) What kind of questions and information do i need to ask and get from my isp? DNS info? Logins and Passwords?

2) What do i need to do on my linux box to have that public ip address routed back to my linux box at home?

3) What rules do i need to add to my iptables script to allow this, i know there are certain nat rules that need to be added and port forwarding is needed as well..

4) anything else you can think of that i need to do...

View 9 Replies View Related

Programming :: Two Pointers, That Have The Same Address Point To Different Values?

Feb 17, 2011

I have the most strange problem ever in programming. I fork a process into a parent and a child. In every forked process i declare a pointer, malloc and define a different value for every pointer.When i printf the value and the address guess what? They both have the SAME ADDRESS but DIFFERENT values, as assigned..Here's the portion of my code:

pid = fork ();
switch (pid)
{

[code]....

View 8 Replies View Related

Ubuntu :: Apache Configuration To Run With IP Address?

Feb 13, 2011

I have installed and configured Apache (Apache2). And I have website running so I wanted to configure it to run with an IP Address And I Searched Google and I can't find it.

View 5 Replies View Related

Ubuntu Servers :: Apache Use Server Name Instead Of IP Address

Feb 25, 2010

I've setup a Ubuntu 9.10 LAMP server to host a word press blog on an intranet. I've got everything working except the url for the site.The IP address of the server will take me to the site URL.../But I'd rather use the server's name instead of the IP address URL...When i try to go to URL... in Firefox or IE it give me a server not found page and changes the URL to URL...I also have Webmin installed on the server and I've been playing around with the Apache module and can't figure out how to set it so i can use the server name instead of the IP address to get to the site.

View 6 Replies View Related

Server :: Apache Virtual Hosts With IP Address?

Jul 2, 2010

What is the (officially) proper way to configure Apache so that a given IP address can have two or more virtual host names, each going to different distinct configurations (e.g. with different DocumentRoot, Alias, etc), and also do this for the IP address so that it goes to a designated configuration rather than defaulting to the first or a random host name?

Apache documentation does not appear to address this. If so, it has it hidden in a non-obvious place.

View 7 Replies View Related

Software :: Get Apache To Listen To Specific IP Address?

Jun 6, 2011

I am trying to get apache to listen to specific IP address and I have read up of the listen command (http://httpd.apache.org/docs/2.0/bind.html) I can get virtual sites to work but not the apache it self.

View 5 Replies View Related

Ubuntu Servers :: Get Apache To Point To Addresses Like "localhost" Or Outside Ip?

May 31, 2010

I am planning on installing an Apache server today. I know how to get it to point to addresses like "localhost" or my outside ip, but how do I get it to point to a URL like [URL]? (That's just an example URL)

View 4 Replies View Related

Ubuntu Servers :: Apache 2 (99)Cannot Assign Requested Address?

Mar 20, 2010

my Apache2 was running fine for a while. Bur yeserday when I tried to start it again after a couple of weeks of vacation, I got the message:

* Starting web server apache2 [Sat Mar 20 10:48:12 2010] [warn] The Alias directive in /etc/phpmyadmin/apache.conf at line 3 will probably never match because it overlaps an earlier Alias.

[code]....

View 7 Replies View Related

Ubuntu Servers :: Can't Access Apache - Any Server Over My Primary Ip Address / Do That?

May 17, 2010

I have no idea what is going on here and this is the second time it has done this but. I just installed Lucid Lynx Desktop Edition for my Server. I have installed apache php5 mysql binarys. I have 3 ips on the machine 10.0.1.30, 10.0.1.37, 10.0.1.38. .30 is the main ip 10/100 the rest are 10,100,1000 ports. I can only access Apache 2.2 over .37 or .38 but not .30

I have not used Ubuntu alot but I am starting to and this really pisses me off since all my computer have aliases to the machine through .30

View 5 Replies View Related

Server :: Configure Apache To Host 5 Domains As Virtualhosts In The Same IP Address?

Jun 2, 2011

I've been for a while trying to configure my apache to host 5 domains as virtualhosts in the same IP address, but seems that neither one makes it through... it always takes first one, because it is the default:

NameVirtualHost *:80
<VirtualHost *:80>
ServerAdmin xxxxxxx@xxxx.net

[code]....

As you can see I tried the ServerName with the http://, in quotes, without it...

View 11 Replies View Related

Software :: Apache Won't Start (Gentoo): Could Not Find IPv4 Address

Jul 23, 2011

I installed it the standard way using emerge/portage, but it fails to start:

Code:

alpha skyer # /etc/init.d/apache2 start
* Caching service dependencies ... [ ok ]
* Starting apache2 ...
apache2: apr_sockaddr_info_get() failed for alpha
apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [ !! ]
* ERROR: apache2 failed to start

I'm used to have Apache unable to find pc's FQDN, as I don't set it, and it works without it.

From /var/log/apache2/error.log

Code:

[Sat Jul 23 06:41:12 2011] [alert] (EAI 2)Name or service not known: mod_unique_id: unable to find IPv4 address of "alpha"

Computer has IPv4 address set. I suspect that the nature of the problem is in the fact, that alpha has two network interfaces (it is used as router also). I've checked Apache conf files, but didn't find any meaningful directives to set interface or something similar.

View 1 Replies View Related

CentOS 5 Server :: Apache Two Virtual Hosts On A Single IP Address?

Feb 22, 2011

I am trying to run two web servers (Virtual Hosts) on a single Linux Centos 5.5 box with a single IP address 192.168.0.182. I did all the pre-installation requirements such yum install mysql, yum install mysqladmin, service httpd start, service mysqld start etc etc.In /var/www/html directory, I have two folder called server1 and server2. These two folders have the necessary web server php script files and folders. I opened the browser and managed to install the script on one web server successfully. When I put the IP address 192.168.0.182 on the browser address bar, the page loads without any problem. Now I would like to be able to install the other web server script and I don't know how to?Here is my httpd configuration;

<VirtualHost *>
DocumentRoot /var/www/html/server1
ServerName development.mysite.com

[code]....

View 15 Replies View Related

Debian Configuration :: Apache Config - Restrict The Access To Local Web Server By IP Address?

Jul 29, 2010

I want to restrict the access to my local web server by IP address. Im in a LAN (192.168.200.xx) so i have this:

[code]....

But when i try to connect from 192.168.200.4 it says i don't have permission to access

View 1 Replies View Related

Ubuntu Networking :: Point To Point Tunneling Server Connection Errors?

Mar 28, 2011

I recently installed the pptpd server on my system and set it up according to these instructions:HTML Code[URL]t=132029However after setting everything up on attempting to connect to it from a windows machine (windows 7 home premium to be specific) it gives me two errors which are 720 and 800...It reaches "registering your computer on the network" fine and then gives 720 on the first attempt to connect and then 800 on the second attempt to connect...and then on the third 720 and 4th 800 and so on..My system running the server's I.P is 192.168.1.70My system running the windows OS trying to connects I.P is: 192.168.1.66

View 2 Replies View Related

Networking :: Policy Routing Using Two Point-to-point Links?

Aug 27, 2009

This one has been driving me nuts for some days now:My Gentoo box which is acting as an internet gateway has two point-to-point interfaces, ppp0 (PPPoE to my ISP) and ppp1 (PPTP VPN link to IPREDator). Packets from my local network are just routed through ppp0 and now the fun part starts: I want to MARK (netfilter...) all packets originating from one specific user on that box in order to use another routing table that will contain a default route via the ppp1 interface.Marking seems to work fine as does the second routing table. But quite mysteriously (at least for me), the packets sent out on ppp1 contain the wrong source IP address, namely the address associated with ppp0.So here is what ifconfig and friends tell me:Network interfaces:

Code:
# ifconfig ppp0
ppp0 Protokoll:Punkt-zu-Punkt Verbindung

[code]...

View 9 Replies View Related

Ubuntu Networking :: Point To Point (ad-hoc) SSH Over USB Or Ethernet?

Jun 3, 2010

I was wondering if there is any way to SSH from one computer to another and completely bypass a router or any other network infrastructure. The reason I ask is because my robot ( same one in this post ) often needs to change which wireless network it automatically connects to, however it is getting annoying to have to drag out a monitor and plug it in along with a keyboard and mouse every time this needs to happen. Instead I'd much rather just plug my laptop into the other computer, SSH in and change the network myself.

So I thought I would ask you kind people if this is possible. The robot's computer has unused ethernet and USB ports, and I'd like to use those if at all possible (and with linux, anything is possible! -- sorta). I thought about doing something with ad-hoc, but this would limit my range (in infrastructure mode I can control the thing anywhere there is internet), and is to be avoided.

View 1 Replies View Related

General :: What Is Production IP Address And Management IP Address In Servers

Jul 20, 2011

what is Production IP address and Management IP address in Linux servers? What is the significance of these two? When to use what?

View 3 Replies View Related

General :: Virtual Memory Address To Physical Address?

Apr 13, 2010

How can I get the physical address corresponding to a virtual address in linux by using /proc file system

View 1 Replies View Related

General :: Use Where Save For The Physical Address Going Towards The MAC Address

Jul 19, 2010

im REALLY new with linux and ive downloaded and installed Ubuntu...now heres the question.how do i set up WLAN internet use? ive tried using ipconfig/all on windows command but im not sure which info to use where save for the Physical Address going towards the MAC Address info

View 14 Replies View Related

General :: Point Sub-domain To Another URL?

Jan 7, 2010

How do I configure Apache 2 to listen to requests for a sub-domain (intranet.digity.com) and point automatically to a URL its a different web server on the same machine)??Keep in mind I still want to still point to the Apache 2 server (port 80), which they currently do.

View 1 Replies View Related

General :: Point /dev/random To /dev/urandom

Jul 12, 2011

I have a server that cannot generate enough entropy to support /dev/random. The particular piece of software having problems can't be configured to use /dev/urandom.

I tried moving /dev/random to /dev/realrandom and symlinking /dev/random to /dev/urandom, but lsof /dev/realrandom still shows processes using it.

In Does urandom share the same entropy of random?, the suggestion is to use mknod /dev/random 1 9. Will this hold across restarts? Should I be using udev somehow?

View 3 Replies View Related

General :: A Point In Syntax In GNU Programs?

Jun 18, 2011

For some commands the command synopsis (syntax) is given like this:

command [a|b] [args ...]

I take mplayer (perhaps not GNU) to illustrate the point:

mplayer [cdda|cddb]://track[-endtrack][:speed][/device] [options]
mplayer [dvd|dvdnav]://[title|[start_title]-end_title] [options]

An item inside square brackets is optional. The pipe sign is the 'or' logical connective (disjunction). But then, what is [cdda|cddb]?
If optional, I can omit it: it makes no sense because there are more the one possible synopsis for the command line.

View 7 Replies View Related

General :: Creating A VM Access Point?

Jul 9, 2011

Is it possible to run a Linux AP using a VM with a USB adapter passed through to it?

What distro should I try? Is there a Live CD with hostapd pre installed?

View 1 Replies View Related

General :: How To Point Postfix To Nagios

Jan 6, 2011

setting up Nagios which I have done quite easily, I have only one concern I am not able to setup email Notification from Postfix. I am able to send and receive mails from Postfix internally, I just need to know how to setup Postfix i.e point the server to get NAgios Notification.

View 8 Replies View Related

General :: What Is The Starting Point Of The Kernel?

Oct 5, 2010

OK, I have been a lifelong windows programmer and user. I started using the Linux OS as my primary desktop OS a few months ago. I decided it would be a good time to focus on programming more for linux than windows.I have downloaded the source code of the Linux kernel. and to avoid me waisting time figuring this out on my own I would like someone to answer me this question.

what is the starting point of the kernel, which file(usually a main.c file)contains the very first line of code executed when the boot-loader starts Linux.

View 4 Replies View Related

General :: Apache Command And Terminal / Command With Apache Through Web Browser And It Is Not Working?

Aug 18, 2009

I want to run a linux command with apache through web browser and that's is not working. and it's working properly when I execute this command through terminal, where is the problem?

NOTE: apache have the privileges to execute the command

View 7 Replies View Related

General :: What Is The Default Mount Point On Systems

Feb 23, 2010

Is the mount point for external media (like USB) always /media?

Because in a Debian system, if I plug in any USB device that goes to the /media folder. So is it the case with all the other Linux flavors like Fedora, Ubuntu, etc. If a USB device is automatically mounted will it always go to the /media directory?

I am not concerned about the name of the devices. I am looking for every external media (like USB) to be listed under /media directory so that my code can run on any flavor of Linux.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved