General :: 5 In 1 Card Reader Not Recognized / Fix It?

Apr 9, 2010

I am very new to Linux. I installed ubuntu 9.10 on my Acer 3050 aspire. It works very well except for a few issues. I can not use my 5 in 1 card reader, nothing shows up in "computer" except "cd/dvd" and "file system". My lg phone does not show up when using my data cable as mass storage, and the touch pad is too sensitive, (i have adjusted the settings listed under mouse/touchpad but to no avail. The biggest problems is the card reader and phone. Can this be fixed?

View 14 Replies


ADVERTISEMENT

General :: Disable Built In Card Reader In Debian?

Dec 11, 2010

I am trying to disable the built-in card reader in my MBP (5,3) running Debian testing. I've noticed that powertop lists the card reader as a major contributor of wake up events and would like to disable it as I rarely need to read SD cards.

I found this with "dmesg":

scsi 6:0:0:0: Direct-Access APPLE SD Card Reader 1.00 PQ: 0 ANSI: 0

and this from "sg_scan -i":

/dev/sg2: scsi6 channel=0 id=0 lun=0 [em]
APPLE SD Card Reader 1.00 [rmb=1 cmdq=0 pqual=0 pdev=0x0]

I don't know where to find the device in /proc and there are no modules loaded for this device (I'm guessing it has support compiled into the kernel).

So, ideally, I would like to be able to enable/disable this device without a kernel recompile. Is this possible?

View 1 Replies View Related

Hardware :: Card Reader/writer That Will Support Most Current Card Types?

Jan 20, 2010

Looking for a card reader/writer that will support most current card types. I am running Fedora 12 x86_64 on a home-grown desktop. Are there any gotchas, that I need to watch for?Also, Internal vs. external, any benefits of one over the other, or is it just personal preference?

View 5 Replies View Related

General :: Auto-starting Nautilus When Connecting A Card Reader (debian, Gnome)?

Mar 17, 2011

Currently when I connect a card reader (with a card inside, of course) gnome auto-starts gphoto. However I don't use gphoto and I would like gnome to auto-start nautilus instead

View 5 Replies View Related

Ubuntu :: Sd Card Not Recognized - How To Make It Recognized

Jun 2, 2010

I just installed Ubuntu 11.04. The drive was formatted when I installed so it's 100% Ubuntu. The only major problem I have encountered is that Ubuntu will not recognize my SD cards. I really need to access these cards, all my film footage is on there. I think the internal SD card reader (If such a thing exists) would have been deleted during the installation process. I am a greenthumb to Ubuntu and have never used it before so I am rather stuck...

View 7 Replies View Related

Debian :: See And Use Sd Card Reader?

Apr 8, 2011

i don't see my sd card reader ?(under xp this card reader "works" but don't read datas ?)

hwinfo give
57: SCSI 00.0: 10600 Disk
  [Created at block.254]

[code]...

View 14 Replies View Related

Ubuntu :: SD Card Reader Undetected?

Dec 6, 2010

I have all of my music on an SD card so it doesn't take up space on my hard drive. I put it into my SD card reader and ubuntu is all like, "gtfo doesn't exist."

View 2 Replies View Related

Ubuntu :: USB Card Reader Is Not Detected

Mar 30, 2011

I have installed Ubuntu 10.10 in my system. I have plug in th USB card reader but it is not detected. Eventhough the same card is detected when I'd pluged in at last night and I have just browse the folders in the memory card.Then I just right click on the icon in media folder and click eject the texts in file /var/ log/messages for above operation.

View 2 Replies View Related

Debian Hardware :: SD Card Reader Won't Work

Jul 13, 2015

I have a Thinkpad X220 (stretch/sid) with a built-in SD card reader.But when I plug in an SD card it won't show up in the file manager (thunar), nor as a /dev/sd* or /dev/mm*.. URL...

Code: Select all$ udisksctl status

Just my internal SSD shows up.How do I get my SD card reader to work?

View 5 Replies View Related

Debian Hardware :: SD Card Reader Not Working

Jul 18, 2011

Stuck an SD card into my laptop (acer timelinex 5830tg) for the first time today, and to no avail. I've done an lspci, but don't seem to see my card reader there. here's the output

00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family HECI Controller #1 (rev 04)
00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4)
00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4)
00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: nVidia Corporation Device 1050 (rev a1)
02:00.0 Ethernet controller: Atheros Communications AR8151 v2.0 Gigabit Ethernet (rev c0)
03:00.0 Network controller: Atheros Communications Inc. AR9287 Wireless Network Adapter (PCI-Express) (rev 01)
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5209 (rev 01)
05:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)

I'm running kernel 3.0-rc6. Issue still remains when booting into 2.6.39 also.

View 14 Replies View Related

Debian Hardware :: Card Reader Won't Mount?

Aug 4, 2011

I've recently purchased a Lenovo Ideapad z470, and installed Debian Wheezy amd64 on it first thing. I was pleased to find that almost everything worked "out of the box." The only problems were the hotkeys and the card reader. I don't care if the hotkeys ever work, but the non-working card reader is more aggravating than I anticipated. I would be most obliged if anyone could lend a hand.So, first things first, here's the output of uname -a:Linux cerulean 2.6.39-2-amd64 #1 SMP Tue Jul 5 02:51:22 UTC 2011 x86_64 GNU/LinuxHere's the syslog output upon inserting an sd card into reader:

Jul 25 22:19:45 cerulean kernel: [11472.262103] usb 1-1.3: new high speed USB device number 4 using ehci_hcd
Jul 25 22:19:45 cerulean kernel: [11472.354801] usb 1-1.3: New USB device found,

[code]....

View 6 Replies View Related

OpenSUSE Hardware :: Getting CAC Card Reader To Work In 11.2

Dec 9, 2009

I could use some instructions on how to get firefox to read and use my cac card. Under Yast the card reader shows up in hardware. I have install pcsc ccid and coolkey through Yast but not sure if I need to do anything else. I have followed instructions for loading the device in firefox but it does not load my certs off of the card.

View 8 Replies View Related

Ubuntu :: Multimedia Card Reader Does Not Work

Feb 25, 2010

My multimedia card reader does not work with new ubuntu version fresh install:
lsusb says:
Code:
Bus 001 Device 002: alcor micro corp. multimedia card reader
dmesg:

Code:
[6.544269] usb-storage: device scan complete
[6.544848] scsi 2:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[6.545482] scsi 2:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[6.546102] scsi 2:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[6.546728] scsi 2:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[6.547227] sd 2:0:0:0: Attached scsi generic sg2 type 0
[6.547338] sd 2:0:0:1: Attached scsi generic sg3 type 0
[6.547439] sd 2:0:0:2: Attached scsi generic sg4 type 0
[6.547550] sd 2:0:0:3: Attached scsi generic sg5 type 0 .....

View 2 Replies View Related

Ubuntu :: Not Recognizing Internal Card Reader

Jul 30, 2010

My girlfriends laptop (Acer Aspire 5536) has an internal memory card slot, however Ubuntu doesn't seem to be recognising it.

[Code]....

View 5 Replies View Related

Ubuntu :: 10.10 (64) Hangs On Boot With USB Card Reader

Apr 18, 2011

My PC is an Intel Core-i7-950 with 8GB RAM. The motherboard is an Intel Extreme, DX580G. Ubuntu (64) 10.10 is the only OS run on this system, and uses the entire hard-disk.

Today, I purchased an internal USB card reader that connects to the USB socket on the motherboard. Once I connected it, the PC started hanging on boot. When it hangs, there is nothing but a non-blinking, still cursor on the top left corner of the screen.

Earlier I had set the Grub2 boot delay to '0', and therefore I guess I do not get to see any messages or the Grub2 menu.

The story is the same with an external USB card-reader. If I connect the external card-reader and try to boot, the PC hangs in the manner described above.

If I disconnect the internal / external USB card-reader, everything is normal.

The following web-page describes the problem in the manner I can understand. But it does not provide a permanent solution.

[URL]

View 5 Replies View Related

Ubuntu :: Usb Card Reader Not Mounting Cards?

Jun 16, 2011

lsusb output:

Bus 005 Device 002: ID 058f:9360 Alcor Micro Corp. 8-in-1 Media Card Reader
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver
Bus 003 Device 002: ID 046d:c313 Logitech, Inc.

[Code]...

View 3 Replies View Related

Ubuntu :: Unable To Get My Card Reader To Work?

Jun 28, 2011

I can't seem to get my card reader to work. The USB port on the reader works and sometimes I can read my SD card. Usually, nothing shows up in the media/ folder. I looked at this write-up [URL]... but I'm not sure if this is what I should do. Here are some info I was able to pull up:

sg_scan -i Code:
/dev/sg0: scsi0 channel=0 id=0 lun=0 [em]
HL-DT-ST DVD-RAM GH22NP20 2.00 [rmb=1 cmdq=0 pqual=0 pdev=0x5]
/dev/sg1: scsi0 channel=0 id=1 lun=0 [em]

[Code]...

View 7 Replies View Related

Ubuntu :: Smargo Card Reader Init?

Jul 15, 2011

When using Smargo+ card reader with Ubuntu 10.04 server, I get the following error when starting up binary using smargo.

Code:
ERROR, function call SR_Init(reader) returns error.
It seems to be a USB problem related to the Smargo+ card reader.

View 1 Replies View Related

Hardware :: 5 In 1 Internal Card Reader Not Working

Jan 10, 2010

I just did a fresh install of OpenSuSE 11.2 for my fiancee on her new HP Mini 110-1030NR, and everything works great, except for the 5 in 1 card reader. Here is the information I believe you may find relevant:

Kernel
2.6.31.5-0.1-desktop

Output of lspci:
Code:
00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge
00:01.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx)
00:06.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2)
00:07.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3)
00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA
00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0)
00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1)
00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4)
00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
00:14.1 IDE interface: ATI Technologies Inc SB600 IDE
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series]
02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)

View 8 Replies View Related

Hardware :: Get Rid Of SD Card Reader Included In 3G Modem?

Mar 4, 2011

I'm using USB 3G modem and it has SD card reader embedded.
I am also using USB hard drive as boot device. It is a Netgear WNDR 3700 router.
I am posting it in here because it is a general question, not really associated with embedded installations.
When loading the system from power up my HDD get's /dev/sda assigned and my modem SD card reader: /dev/sdb [although there's no SD card inserted].
But when booting after restart hard drive is sdb and modem is sda. Thanks to that I get kernel panic and all is over. I have to manually reboot.
I cannot use initrdfs so I can't use UUID/LABEL to identify the device.
Is there any way I could stop this SD card reader from loading?
I believe it uses usb mass storage driver, just as my hdd.

This is from the boot log Code...

View 2 Replies View Related

Hardware :: Setup SIM Card Reader On Ubuntu?

Jun 24, 2011

I got an USB multi card reader that supports SIM card as well, but I can't find a s/w to make it work, I plug it into the PC with SIM but nothing happen,

View 2 Replies View Related

Hardware :: Locate Internal SD Card Reader?

Apr 16, 2010

I have a new computer with with an SSD internal drive, built in SD card reader, and USB expansion ports.If I populate media in all slots and type "fdisk -l" I get a listing of the partitions for the external USB ports but fdisk doesn't report anything for the internal media. If I unplug the USB drives and type fdisk it just goes to the command line. If I type "df" it locates the partitions for the internal SSD drive but doesn't report anything for the media in the built in reader. If I type "mount" the same thing.

I've looked in /dev/ but I can't find anything that looks like something I can mount. I'd expect something like sda1 or something similar but it's not there. The contents of /media/ do report something called "card" but going there and typing "ls" doesn't get me any result. There is also an entry for "mmc1" but it too doesn't report anything.

View 3 Replies View Related

Hardware :: USB-hub / Card-reader From - IN-WIN - How To Get It To Work In Ubuntu 10.04

Sep 1, 2010

I have installed Ubuntu 10.04 32 bits version on a desktop PC. Every thing works OK, exept for a USB hub and card-reader combination from IN-WIN Inc. I could not find a clue on the Internet.
The manufacturer and apparatus code is: ID 10df:0500 (as from "lsusb").

Below I have listed all the hardwire of the PC, as obtained from "lshw". The italic part at the bottom deals with the IN-WIN module. I suspect that it may have to do something with the "emulated scsi-host" thing, of which I just know nothing about.

JGMS:

View 2 Replies View Related

Fedora :: Loading Modules To Work With Card Reader Using F13?

Aug 7, 2010

I found a solution to my card reader problem in a another fedora post but when I type the code in terminal I get:
all config files need.conf /etc/modprobe.d/blacklist
How to write this code so I wont get this error and I can load these modules and also how to edit the modprobe.conf.

The code is below, using fedora 13.
You must load these two modules to work with card reader.
First : Remove the card from the Reader!
AS superuser type in console :
1. /sbin/modprobe tifm_core <enter>
2. /sbin/modprobe tifm_sd <enter>

If you want to automate these modules loading do the following :
edit the /etc/modprobe.conf file
add these :
alias mmc_core tifm_core
alias mmc_card tifm_sd

View 2 Replies View Related

OpenSUSE Hardware :: Card Reader Wont Work?

May 10, 2010

I just installed opensuse 11.2 on my laptop in a dualboot configuration with windows 7.I prefer using suse, but also recognize, that once in a while, windows is useful.One of the things i like to do in linux is handle my photos with f-spot/gimp, but for some reason my laptops built in card reader is not recognized by the system. If a card is inserted, it doesn't even show up in the partition manager..?I'm not completely new to linux, but i'm not an advanced user either, so i can't figure out what to do here

View 5 Replies View Related

Ubuntu / Apple :: Nikon S570 And Card Reader On MBP 5.5

May 19, 2010

I just bought a new Nikon S570 digital camera and I was trying to mount the camera via the USB cable in order to get the pictures off of it but either a) I don't know how to mount the camera properly or b) there is some sort of compability or program that I need to install in order to get it to work. According to lsusb it the camera shows up as being connected:

Code:
Bus 004 Device 003: ID 05ac:8213 Apple, Inc.
Bus 004 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 05ac:0236 Apple, Inc.
Bus 003 Device 002: ID 05ac:8242 Apple, Inc.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 005: ID 04b0:0319 Nikon Corp.
Bus 002 Device 003: ID 05ac:8403 Apple, Inc.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 05ac:8507 Apple, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
So maybe i just need to know how to mount it so I can access the files?

Also, I tried to plug the SD card into the built in card reader but it never showed up either. Do I need to do anything different to get the SD card to mount too?

View 1 Replies View Related

Ubuntu Networking :: Card Reader Shuts Off WiFi

Aug 27, 2010

This is the issue, and I have had this happen with a few card readers. I have a Alfa Usb Wifi adapter model number AWUS036H using the rtl8187 Chipset. It works fine, unless I plug in my flash card reader directly to the board. If I plug it in to a hub it works fine until I put a card in, I was also having the same issues using a USB Video Capture unit by the name of EASYCAP. This was also happening in XP. Must be some driver conflict of sorts.

View 1 Replies View Related

Fedora Hardware :: Acer Aspire One - Built-in Card Reader?

Jan 1, 2009

I have an Acer Aspire One running Fedora 10.The Aspire One has a built in multi-format memory card reader compatible with SDHC, XD, Memory Stick Pro and MMC cards, however the card reader is only detected during bootup if a card is inserted otherwise the device isn't detected, the relevant drivers aren't loaded and the card reader doesn't work.

In other words if Fedora is booted without a card in the reader and I then want to use the card reader I have to insert a card and reboot in order to use it, after which cards can be inserted & removed and are detected and automounted with no problems.When the card reader is working lsmod shows the following modules are loaded.

[Code]...

If the laptop is booted without a card in the reader none this shows up. I've also tried manually loading the mmc_core, mmc_block, sdhci, memstick & jmb38x_ms modules to see if this kicks the reader into life but it doesn't. Is there a way of forcing the detection of this device during bootup?

View 14 Replies View Related

Fedora Hardware :: Flash Memory Card Reader / Writer

Jan 20, 2010

Looking for a card reader/writter that will support most current card types. I am running Fedora 12 x86_64. Are there any gotchas, that I need to watch for? Also, Internal vs. external, any benifits of one over the other, or is it just personal preference?

View 2 Replies View Related

OpenSUSE Hardware :: Internal SD Card Reader Not Functioning In 11.4 On HP 630 Laptop?

Sep 2, 2011

I'm running openSUSE 11.4 on an HP 630 laptop with KDE. Everything works fine but cards inserted into the internal SD card reader are not read, and from what I can tell the reader is not recognized at all by openSUSE on my system. The reader does not appear listed in hardware information and is not listed with the command fdisk -l . There appear to be no references at all to the reader. The reader is recognized, however, on a live USB of Linux Mint 11, where the model is listed as "Generic - xD/SD/M.S." (the vendor too), revision 1.00. It is listed as an SCSI Controller scsi5. Typing lsscsi in the termal of openSUSE provides the following:

Code:
linux-mlxx:/home/eve # lsscsi
[0:0:0:0] disk ATA Hitachi HTS54323 ES2O /dev/sda
[1:0:0:0] cd/dvd hp DVDRAM GT30L mP06 /dev/sr0
lspci provides:

[Code]...

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved