Fedora X86/64bit :: Error Before Booting \ Error Message:IOMMU: Mapping Reserved Region Failed?

Feb 20, 2010

I'm a recently proud owner of a new Aspire AS3810T with Fedora 12 installed, when it boots up before entering the boot screen when it loads I see this error message:IOMMU: Mapping reserved region failedHow can i fix this error? It's quite frustrating

View 2 Replies


ADVERTISEMENT

Fedora :: Get The Message "IOMMU: Mapping Reserved Region Failed" 8 Times

Aug 4, 2011

System: F15-64bit, Intel Core i7 on Asus P6T mobo. I've upgraded to 2.6.40, and I'm regretting it!While 2.6.38 still works fine (apart from the usual random panics), 2.6.40 gives errors on boot, and reliably panics soon after login. Early in the boot I get the message "IOMMU: mapping reserved region failed" 8 times. Then boot appears to proceed as normal, at least once the nvidia blob is removed in favour of Nouveau (otherwise, forget it...).

After graphical login, the system freezes within a couple of minutes.After a text login, the system freezes within seconds with a panic, starting "BUG: Scheduling while atomic: swapper". A forum search for the IOMMU message leads to https://fedoraproject.org/wiki/Commo...IOMMU_handling but this talks about old 32-bit releases without BIOS virtualization support.

[Code]...

View 5 Replies View Related

Fedora :: Evolution - Error While Sending Message. Failed To Append To : Unknown Error Appending To Local 'Sent' Folder Instead

Jan 28, 2011

When I send mail via Evoultion it does seem to send ok but still the following error message comes up: Error while sending message. Failed to append to : Unknown error Appending to local 'Sent' folder instead. Not sure what's up with that but thought I would mention it.

View 3 Replies View Related

Ubuntu :: Memory Mapping Failed. Error: 1?

May 26, 2011

So, I was working with Ubuntu 9.10 and I wrote a C program which was working just fine. Then, I have installed Ubuntu 10.10 and tried to run this same program again. However, I get the following error: Code: Memory Mapping failed. Error: 1 Part of the code has the following: Code: volatile ulong *memory;

int fd = open("/dev/mem", O_RDWR | O_SYNC);
if (fd < 0) {
printf("Could not open memory.
");
return(0);
}
code....

Does anyone have an idea what the problem could be? I do not know if there would be any significant change between Ubuntu 9.10 and 10.10 that could be generating me this problem.

View 3 Replies View Related

Red Hat / Fedora :: Getting Error Message 'session X' Failed

Mar 28, 2011

My fedora 14 has OpenSSH_5.5p1, OpenSSL 1.0.0a-fips 1 Jun 2010 running. I am able to use putty to ssh to my fedora. I installed NXSERVER - Version 3.2.0-74-SVN OS (GPL, using backend: 3.3.0) but when i used nxclient to connect to the server i always got 'session x' failed.

[code]...

View 1 Replies View Related

Fedora X86/64bit :: Installing VNC Of F7 - Failed Dependencies Error

Dec 22, 2009

I am pretty new to linux, I was trying to install vnc enterprise edition (x64) but was getting the following error message:

"error: Failed dependencies:
libX11.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libXext.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libXtst.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libc.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libc.so.6(GLIBC_2.2.5)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libc.so.6(GLIBC_2.3)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libcrypt.so.1()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libcrypt.so.1(GLIBC_2.2.5)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libdl.so.2()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libdl.so.2(GLIBC_2.2.5)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libgcc_s.so.1()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libgcc_s.so.1(GCC_3.0)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libgcc_s.so.1(GCC_3.3)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libm.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libm.so.6(GLIBC_2.2.5)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libstdc++.so.5()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libstdc++.so.5(CXXABI_1.2)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libstdc++.so.5(GLIBCPP_3.2)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libstdc++.so.5(GLIBCPP_3.2.2)(64bit) is needed by vnc-E-4.5.21561-1.x86_64"

What to do for me to resolve this error.

View 4 Replies View Related

Fedora Installation :: Updating - Error "rpmdb: PANIC: Fatal Region Error Detected; Run Recovery"

Nov 13, 2010

for some reason my first updating was interrupted and from then i cannot update. i get the following message:

rpmdb: PANIC: fatal region error detected; run recovery
error: db3 error(-30974) from dbenv->open: DB_RUNRECOVERY: Fatal error, run database recovery
error: cannot open Packages index using db3 - (-30974)
error: cannot open Packages database in /var/lib/rpm
CRITICAL:yum.main:
Error: rpmdb open failed
[root@laptop etc]# yum repolist
[Code]....

View 5 Replies View Related

Fedora Installation :: Error Message - Failed To Mount 524M Volume

Jan 12, 2011

I just having to do a fresh install and get the following message to close after setting up
partitions and on clicking write to disk:

Failed to mount "524M Volume"
Method "Mount" with signature "ssas" on interface
"org.freedesktop.Hal.Device.Volume" doesn't exist.

Only option under message is close button. I'm using Fedora 14 xfce 32bit live CD. The install seems to carry on normally until done but then when I check the partitions I've setup I seem to only have the origonal uneditted default partitions.

View 2 Replies View Related

Fedora :: Movie Player Error Message - Pa_stream_writable_size() Failed: Connection Terminated

Jun 5, 2010

I ran Movie Player to play .mov file, but it generate the following error message:

pa_stream_writable_size() failed: Connection terminated

The .mov file is wide screen, I am not sure if that's why the error occurred. By the way, the .mov file is several hundred megabytes and store on DVD.

View 5 Replies View Related

Fedora Networking :: Samba Can't Mount Shares - Error Message 'Failed To Receive Shared List From Server'

Oct 4, 2009

It's been awhile since I posted anything which is a good sign my install has been working well and I have been able to handle most everything. However, I'm not able to handle this issue. I recently installed F11 and everything went well. But, when trying to see my other computers on the local network, I cannot. I receive this error message: Unable to mount location Failed to receive shared list from server. I understand the message as it is obvious, but do not know how to fix it.

View 14 Replies View Related

Fedora :: Rpmdb: PANIC: Fatal Region Error Detected; Run Recovery

Nov 12, 2009

I am getting an error from yum update and Kpackagekit:

[root@asus-m4n82 tylerm]# yum update
Loaded plugins: refresh-packagekit
Setting up Update Process
rpmdb: page 18816: illegal page type or format

[code]....

How do I "run recovery"? Edit: Ok so it looks like I had som bad ram in my system that caused this - I found a site that told me to do this:

rm -f /var/lib/rpm/__db*
rpm rebuilddb
yum clean all

I did this but now when I try something like yum install firefox it pulls in a ton of already installed packages.

View 2 Replies View Related

OpenSUSE Install :: Error Message On Booting?

Dec 7, 2010

Running 11.3 64 bit updated to kde 4.5.4I noticed when booting yesterday the following error message is shown:-

[ 17.688956] end_request: I/O error, dev sr1, sector 4294180608
[ 17.696944] end_request: I/O error, dev sr1, sector 4294180608
[ 17.702846] end_request: I/O error, dev sr1, sector 4294180784

[code]....

View 3 Replies View Related

Ubuntu :: 10.10 Booting Stopped - Getting Error Message

Mar 2, 2011

I have Ubuntu 10.10 and when I boot my PC I can see the following message: Ubuntu is running in low graphics mode and Ubuntu stops booting. I can-t boot in it I can only use command line. I think I accidentally uninstalled some packages clicking at completely removal at some ipod utilities in synaptic.

View 3 Replies View Related

General :: Compiling Own Kernel - Error Message On Booting

Aug 7, 2010

These days, I tried to compile my own kernel. Now, it seems work. However, when the kernel is booting, I always get the error message like below:
acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
It looks that something is wrong with my acpi subsystem's configuration. But no matter How I reconfig it, this message still occurs.
My distribution is UBUNTU 10.04 LTS
original kernel with the distribution is 2.6.32
My own kernel is 2.6.35

View 7 Replies View Related

OpenSUSE Network :: Error Message - VPN Connection Failed

Jun 19, 2010

(I'm probably going to have my forum account revoked due to excessive usage ) I'm setting a VPN connection on openSUSE 11.2. Using the networking icon on the tray I add a PPTP connection, set it up but I receive a message 'VPN connection failed'. Googling it up I tried changing a setting called 'refuse-eap' to 'yes' but it doesn't seem to work. Here's the result from the log file:

[code]...

View 1 Replies View Related

Ubuntu Installation :: Getting Failed I / O Error Message On 10.04 Install

Sep 6, 2010

10.04 new isnstall from cd goes for a minute then I get this error message:
old p3 800 machine, will this distro work on an old machine like this:

BusyBox v1.13.3(Ubuntu 1:1.113.3-1ubuntu11) built-in shell(ash)
Enter "help for a list of built-in commands.
(initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: input/o-put error
Cannot mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs
(initramfs)

View 1 Replies View Related

Fedora X86/64bit :: ERROR - X86_64 Error: 37: No Locks Available

Aug 10, 2011

I am getting the below Issue while cloning Oracle Database Server 10.2.0.5 from cold Backup dump. its happening during "perl adcfgclone.pl appsTier". Can anyone help on this issue..? find the error details below.

SQL*Plus: Release 10.2.0.5.0 - Production on Sat Aug 6 12:10:08 2011 Copyright (c) 1982, 2010, Oracle. All Rights Reserved.

[Code]...

View 2 Replies View Related

Software :: Red5 - Connection Failed Or Closed Error Message

Apr 29, 2010

Firstly I am new to red5 and not very strong when it comes to linux. I have had installed red5 on my dedicated server and going by the http://myIP:5080/installer demos it is all working fine. My problem is I cannot get it to work with my software being flashchat. I am not sure if it comes from me using the incorrect RTMP url and if so after trying about 20 or more ways of typing it in I always get the same error message "Connection Failed' or "Connection Closed" not to sure what is meant by Closed as to whether it's working but can't get in or what ever. I am after someone who can get this to work for me please and I am willing to pay for that service once it is working.

View 2 Replies View Related

CentOS 5 Server :: Error Message: Create_connection_server_info Failed: NT_STATUS_ACCESS_DENIED?

Aug 30, 2011

Our server is a x86_64 centos 5.5 computer. we installed samba3x-3.5.4-0.70.el5_6.1.x86_64.Samba seems work fine, we don't notice any problem in using it. But in the workstation log file, there are a lot of error messages like:

[2011/08/26 14:37:57.682260, 1] smbd/service.c:678(make_connection_snum)
create_connection_server_info failed: NT_STATUS_ACCESS_DENIED
[2011/08/26 14:37:58.194394, 1] smbd/service.c:678(make_connection_snum)

[code]....

View 2 Replies View Related

Ubuntu :: Error Message - Connect Debounce Failed Port 3 Disabled

Sep 14, 2010

Connect debounce failed port 3 disabled. i get this in the terminal (alt+f1) every time i log on. i like this terminal better than the standard one and i want the error message to stop appearing every time i try to type something.

View 5 Replies View Related

CentOS 5 :: DStat Error Message - Module Topio Failed To Load

Aug 8, 2010

I need to know I/O stats per process. When executed dstat give the bellow error message.
dstat -M topio -d -M topbio
Module topio failed to load. (No module named dstat_topio)
Module topbio failed to load. (No module named dstat_topbio)
CentOS release 5.3 (Final)
uname -r => 2.6.18-128.2.1.el5
How to resolve the above error message

View 2 Replies View Related

Fedora Servers :: Error In Updating System Using Yum - Failed To Use Search Generator - Error 256

Aug 26, 2009

when ever i give yum update am geting this error. failed to use search generator: failure:repodata/318b9912817ec3309c6defc47d79e878c52a21fd1457d191bb ff060fdb7f7f8d-primary.sqlite.bz2 from rpmfusion-free-updates: [Errno 256] No more mirrors to try. I was trying to install tomcat using yum. Is there any way i can install tomcat other than yum utility. I downloaded he zip folder for tomcat which i downloaded from apace tomcat site.

View 2 Replies View Related

Ubuntu Installation :: Error Message: The Grub Package Failed To Install Into /target

Oct 2, 2010

I was trying to install ubuntu 9.10 as a dual boot system with windows and I recieved this error message: The Grub package failed to install into /target/. Without the Grub boot loader, the installed system will not boot

This Error comes up after 94% of the install. I also cannot seem to get the side by side install option to work (sometimes this option appears sometimes it does not) I am not sure but I beleive seome of the install files have been placed on the hard drive because I only get the option now to install on the hard drive and totally wipe clean or the emptiest hard drive. So how would I get the possible Ubuntu install off the Hard drive. I have used this CD to Install before it has no scratches therefore should work. Also If I have Win Xp on a Raid 0 will the Ubuntu 9.10 install ?

View 4 Replies View Related

Ubuntu Installation :: Failed - Unrecoverable Error When Booting From The 10.04 Live CD - 10.04

Jun 28, 2010

I'm getting the following error when booting from the 10.04 live CD: Installation Failed. The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again.

I checked the CD for defects, and even tried re-downloading/burning to a new disc, but got the same problem. I tried booting in to the LIVE session then installing from the desktop but I still got the same error. I have had 9.10 running on here fine, and after running a Kubuntu 9.10 disc I had to hand to check it would work, that installed fine (hence the auto-partitions you will see in my info dump below). Here is some information about my system, let me know if I've missed anything. I've also included a copy of the syslog below.

[Code]....

View 6 Replies View Related

Fedora Security :: Error: Image.jpg Has Failed To Upload Due To An Error

Nov 1, 2010

I have wordpress server running on my machine and I have SELinux enabled for enforcing/targeted. I am unable to insert images, music, etc from the add new post field on the wordpress dashboard. I receive the following error:

image.jpg has failed to upload due to an error The uploaded file could not be moved to /var/www/html/wordpress/wp-content/uploads/2010/10. When I disable SELinux completely, it works fine. Does anyone know what Boolean I need to check to resolve this issue?

View 4 Replies View Related

General :: Error Cannot Find Disk At [hash-code - Looks Like 0ace5f When Booting OpenSUSE 11.2 GNOME-LIVE (64bit)?

Jan 29, 2010

I am in the process of re-DL-ing the ISO as the checksums didn't match.

Mind you, that was with a shell extension in Win-Lose. Who knows.

Anyway:

I have the ISO (that I had previously) on a USB courtesy of UNetBootIn. All appears well until, quite quickly, I receive an error after the loading process which goes something like:

Code:
Error: cannot find disk at [hash-code - looks like 0ace5f etc etc, is about 12 char's in length.]Something very similar (but not same error I think) happened when I tried to do the same with my OpenSolaris or Fedora install. I.e., gets as far as the very beginning of the loader and then: bork.

At least one of them said "will reboot in 120 secs". Saves me the trouble!

View 2 Replies View Related

Fedora Security :: Send An Email Using Evolution The Message Was Not Sent But Returns A Error Message?

Apr 30, 2009

Hi I am running a fedora 10 desktop. when i send an email using evolution the message was not sent but returns a error message:"Error while performing operation.DATA command failedError: 550 Viagra SPAM - Hi in Subject" and the message did not have an attachment just plain words. what might have gone wrong for i have been using this for sometime without a problem. or what security measures should be in place to remove this viagra spamAm I infected by virus on this fedora, all my updates are up to date.

View 1 Replies View Related

Ubuntu Installation :: Error Booting 9.10 - Failed To Restore Crtc Config

Mar 3, 2010

I'm trying to boot Ubuntu from a LiveCD in a computer I recently bought that currently has Windows XP on it. The Ubuntu menu comes up when I boot but it always snags on an error "failed to restore CRTC configuration -22" or something like that, and just goes on ad infinitum.

I tried running Linux Mint too and had the same problem, which makes me think it's an issue with the computer itself - which is an Averatec, if that helps.

View 2 Replies View Related

OpenSUSE Hardware :: The Exact Error Message Is: "Failed To Extract ZIP Archive" Or "Failed To Load File"?

Apr 13, 2011

I think I'm ready to install Linux openSUSE physical on my Laptop. NO VMware Workstation anymore...But before I can do that I must be sure that Linux works on my System.--- SYSTEM ---

System: TOSHIBA Satellite A300D-13A (PSAK4E-01F00VGR)
CPU: 2x AMD Turion´┐Ż 64 X2 Mobile Technology TL-64
--- NETWORK ---

[code]....

OK, should be enough for the first, ask if I forgot some Hardware...Because I can't find any driver, and I'm not sure. I'm a LINUX NOOOOOOOOOB!!I really want to install Linux openSUSE, I'm MICROSOFT/WINDOWS HATER since 1 month now!! PS: Wine can't start my favorite Programs like Project64 a N64 Emulator. It fails to start a game! I think the graphic plugin crashes... | The exact error message is: "Failed to extract ZIP Archive" or "Failed to load file".

View 7 Replies View Related

Fedora :: 15 - Iphone Won't Mount - DBus Error Org.freedesktop.DBus.Error.NoReply: Message Did Not Receive A Reply

Jul 5, 2011

when I connect my iphone (3GS, 4.3.3) to Fedora 15 it gives me this error: Unable to mount iphone
DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus). The weird thing: after looking in var/log/messages it appears that it is trying to be used by NetworkManager. And when I lookin NM, i can see iPhone as an ethernet device (cable unplugged).

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved