Fedora :: How To Stop Gnome In 13 From Auto-mounting The Cdroms
Jul 13, 2010how to stop gnome in fedora 13 from automounting the cdroms i insert? i just want it to ignore them.
View 4 Replieshow to stop gnome in fedora 13 from automounting the cdroms i insert? i just want it to ignore them.
View 4 RepliesI have one of those lovely Western Digital external hard drives and it seems to have an UDF "partition" on the hard drive itself. I cannot format it, remove it from the hard drive itself, or disabling the UDF seems to be a no go once its popped into a Linux distribution of any kind.
So my question is, is it possible to stop the UDF from even auto mounting at all?
System
Ubuntu 10.10 Maverick Meerkat
Does anyone else have this problem. Came just after recent update and is highly annoying. Plug usb device in and it is recognized on lsusb but not mounting and appearing in media folder. How do I solve this. Searched the forum but nothing useful
View 10 Replies View RelatedI would like to exec a script whenever a user mount a device. The device could be an internal device (for example a partition on a second hard disk) or a removable one (for example a usb hard disk). The script must have sudo capabilities even if the user is not included in the admin group. Is it possible?
The specific question:
I would like to add acl option to a device whenever it is mounted.
I tried fstab but it's changing the behaviour of nautilus see:
[URL]... so I would like to create a script with the command
Code:
sudo mount -o remount,acl /media/data
and auto execute it any time data is mounted.
I have a fresh installation of Fedora 11 and I am having a hard time figuring out how to automount my storage drives. Each time I login, I try to access my various storage drives and gnome makes me authenticate asroot before mounting it. FSTAB lists only logical volumes but not my storage drives. What can I do to make sure these automount when I login?
View 3 Replies View RelatedI know this problem was mentioned here before but because I could not find a straight forward solution anywhere I am reposting this here. So here goes.As of today, my Fedora 13 64-bit has ceased to auto-mount USB drives completely. I have made absolutely no changes to the system and I am completely baffled and frustrated by this sudden development. I desperately need this system to function properly as I use it for school and this really put a wrench in my works, especially since I have done nothing to cause this. I assume that one of the many recent updates that have been released must have done this, but I have absolutely no idea how to fix this. Why do Fedora developers release updates that cripple a perfectly functioning system is beyond me and crap like this really makes me consider switching back to Ubuntu.
View 9 Replies View RelatedI boot several Redhat based distributions, Fedora 15, Fedora 14, CentOS, Scientific Linux, Redhat and occasionally something non-Redhat based like Ubuntu and Debian. Out of habit and preference I frequently set up partitions to be auto mounted at boot through fstab. Somewhere in time something went seriously wrong with the CentOS install. There are a ton of permission denied errors while booting CentOS (text style boot) mostly regarding shared libraries. The system will boot to the desktop and everything looks OK but some things don't work. I can't update the system because I have no network connection. I obviously can't get to the Internet or get e-mail. I can open a VT but can't log in as regular user or root.
Permission denied in both instances. I didn't make any drastic changes to the CentOS system, just minor tweaks. The culprit in my opinion is a combination of the fact that one of the other Linux systems did an SELinux relabel while booting and the CentOS partition was already mounted. Since the CentOS partition was mounted it too was relabeled. I can't prove this. If there's a way to prove it then I just don't have the skills or knowledge to do so. It's basically a theory based on what I know I've done with the several installed distributions. This is not a rant nor is it a request for help. Just a comment. An assumption, hopefully a correct assumption. The CentOS install was working flawlessly until something happened and I think that something was the SELinux relabel.
I am on a Fedora 12 box, and it's my job to do some custom configs to xorg.conf. To start this, I have to remove a bunch of devices' entries and modify others. We're using the proprietary Nvidia drivers, and they work fine except that something - perhaps the NVIDIA X Server Settings app - keeps modifying the xorg.conf. After I write a change to see if it will work or break the machine, I have to restart the entire computer, as restarting X by itself blanks out the monitor so that I can't even see a virtual console. After the restart, X starts just fine and goes into GNOME, but as soon as I look at the xorg.conf, everything I've removed or commented out from the original, auto-generated file has reappeared. How to stop this infuriating behavior so that I can rewrite xorg.conf and make the changes stick?
View 7 Replies View RelatedHow doI change the time interval for auto-logout in gnome? Changing the TMOUT environmental variable only works for bash shell.
View 1 Replies View Relatedis this possible? I can't find a answer for this question..
View 11 Replies View RelatedUnder Gnome2 you were able to stop the OS from turning off the screen by selecting "never" as the time to turn off the display when the computer was idle. This was found under the screensaver configuration.The screen tool for Gnome3 does not offer "never" as an option. Does anyone know how to stop Fedora 15/Gnome 3 from turning off the display?
View 14 Replies View RelatedHow do I stop the display from turning off? In 'System Settings/Screen', I can only choose from a preset range of minutes - there is no option to disable it. Very annoying when watching a 90 minute movie, for instance. At least under FC14 I had the disable option. I tried unchecking Power Manager in gnome-session-properties, but that disabled the system from suspending when the laptop lid is closed and might have other ramifications as well. I tried disabling Screensaver in gnome-session-properties, but 'System Settings/Screen' still showed up with the same options, so it appears to be unrelated. Anyway, I suspect this is a power management issue, not a screensaver issue.
View 14 Replies View RelatedI have a 500 GB ext4 formatted HHD which i have to manualy mount when ubuntu starts. I have read much on the topic but am still unsure what i should add to fstabmy output when entering "sudo fdisk -l" is
"Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
I was going through some settings and inadvertently changed the UID for my primary logon. I then realized what I did and changed it back and set the group back to my username.Since then, it only auto-logs in on startup. I cannot get it to prompt for a password again. I've tried normal things like changing "ask for password on login" and then changing it back, but that hasn't helped. I'm sure there's something else that I'm missing, but don't know what it is. Right now, it says "asked on login" but it doesn't.
View 4 Replies View RelatedI've recently installed Centos 5.3. Each time the pc starts KDE starts automaticaly, how can I remove that? I dont want to uninstall KDE, I just want to begin in the konsole and start KDE only if I need it.
View 5 Replies View RelatedUSB Flash drive appearing in GParted but not auto mounting
GParted Screenshot:-
my opensuse is not auto mounting USB drives anymore. It was working a few weeks ago! I have an external 500GB HDD and also an 16GB Kingston USB flash disk, both are not being auto mounted.If i do lsusb i get
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 006: ID 0930:6545 Toshiba Corp. Kingston DataTraveler 2.0 Stick (4GB) / PNY Attache 4GB Stick
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[code]....
I thought I'd format my new 2tb drive to ext4, so did that, created a mount point, chown'd it, edited fstab, and now it gives me this:
Code:
neur0m4ncer@box:~$ sudo mount -a
mount: special device /dev/sde1 does not exist
[code]....
I currently run a Windows XP virtual machine (using VirtualBox) so that I can use iTunes. This is fine, and I have set up a USB device filter which allows me to use my iPod, and update it via iTunes on the VM. However, this only works sometimes. I think the reason is that the VM sometimes can't get access to the iPod because it's mounted in Ubuntu - I think it may just be a race for who can mount it first - Ubuntu or the VM, when I plug it in. Is there a way I can prevent the iPod from automounting in Ubuntu so this problem (hopefully) won't arise?
View 2 Replies View RelatedI have my "documents" folder pointing to a Samba share on a 9.10 server. (Client is 64 bit 9.10). In /etc/fstab I have
Code:
//192.168.20.102/sean/Documents /home/sean/Documents cifs credentials=/home/sean/.smbcredentials,uid=1000,gid=1000
This always used to mount automatically and has suddenly stopped. Same result if I use smbfs instead of cifs. I have worked around this by adding noauto and then mounting it in /etc/rc.local.
Anyone else had this and fixed it so that the share mounts at boot rather than login. I do have some cron tasks that require this to be mounted and assume they will fail unless I login immediately after a reboot.
Enviroment:
-server ubuntu 9.04 with samba
-client fresh ubuntu 10.04
ubuntu is not auto-mounting samba shares. Old 9.04 done it without a problem. I need to type sudo mount -a to have samba mounted.
fstab:
//192.168.1.101/www /mokonawww cifs auto,iocharset=utf8 0 0
ls -l
drwxrwxrwx 25 root root 0 2010-05-03 17:44 mokonawww
Tested with diffrent parameters. And another problem also with samba shares, when I edit file from editor (eclipse) after save i got 'file changed dialog'. seems like file is written with some delay ? and timestamp dont agree (its my blind quess). On 9.04 no problems. Tested with 2 instances of Eclipse. One copied from 9.04 and second fresh install. Other editors raport the same problem. Its anoying as hell.
I've recently installed Arch on my main PC, and I decided to use Xfce4 desktop environment as appose to gnome that I use on my laptop. Firstly, I had to search round for an icon theme to get any of the icons working (they were all just papers with red crosses in them to start with), which I think is taking lightweight a bit too far :P, but just my opinion.Now i've got that sorted I turned to the problem of auto-mounting partitions. I'm having some trouble getting HAL to auto-mount my NTFS partitions which have my documents and music on. They are NTFS because i've got dual boot windows, and had windows before Archlinux so NTFS was the logical fs type to use. I think HAL is auto mounting dvd's etc. (can't be sure as I aren't in Arch at the minute)I can mount the NTFS partitions manually using:mount -t ntfs /dev/sda(number from 1 through 3) /mnt/sda(1 through 3)
However, I can only access this via root, so I carried out: mchmod scott.scott /mnt/sda(1-3)or something similar and that works fine, so I know they can be mounted successfully. I've tried auto-mounting them using fstab but can't seem to get this working, and I would rather not have fstab auto-mount them, I would rather let HAL sort all that out for me.I have checked that dbus, hal, consolekit and xf86-input-evdev are all installed (although im not sure what xf86-input-evdev does).Has anyone got any ideas why its not auto-mounting the NTFS partitions. My laptop mounts the NTFS windows partition fine using gnome.
i am using ubuntu 8.04 and i am facing a problem of mounting external pen drive, exernal harddisk or even other /dev/ partitions in my login mount is not working so i manually mount the partition by mount command .. but i dont know how i can resolve this problem ...
fdisk -l currently returns as
Disk /dev/sda: 160.0 GB, 160000000000 bytes
255 heads, 63 sectors/track, 19452 cylinders
[code]...
maybe not so simple as what the subject saysBackgroun storyI have a couple of encrypted hard drives created with cryptsetup
I have the following lines in my /etc/crypttab
data1 UUID=someUUID none noauto
data2 UUID=someotherUUID none noauto
[code]...
I would like a USB thumb drive to be automatically mounted whenever I insert the drive into my PC (previously I had been mounting it manually with the 'mount' command). I gave the USB drive a unique label with e2label. I added an entry for it in /etc/fstab. This works in the sense that if I run "mount -a", the drive will be mounted. However, it still isn't completely automatic. Am I missing something? What else do I need to do?
View 8 Replies View RelatedI just installed 9.10 on my Gateway MD2614U and everything seems to be working but the mouse. Every now and then when i open places and hover over an item it brings it up without me clicking. It does it on other things too.
View 2 Replies View RelatedWhen I use "Search for Files" in Ubuntu (9.1 and 10.04), sometimes the computer continues to search after I've double clicked one of the results, and it noticeably slows the launching of that file unless I immediately click "stop" on the search window
View 2 Replies View RelatedI have downloaded CENTOS 5.5 32-bits ISO and burnt in a CD. While trying to install it in VMplayer, the installation is started automatically without asking me to input anything.
How can I stop the auto installation? Or I have downloaded a wroing image?
my mouse is not being seen so I need to log in without the xsession autostarting to get a cmd line login.
my account will not let me login with my passd so the console is my only access with root but i cannot do anything withourt a mouse.
1. How can i get logged in?
2. How can I stop xsession from autostarting on a reboot once i get loged in i can try to remove that setting and boot the box.
3. secure session lets me in but the xterm is not active so I cannot type any commands.
I'm not sure how to do this. I checked the hard drive preferences and looked through the forums... I don't want to manually mount my hard drives(s) every time I boot up just to access my music and wallpapers.
View 5 Replies View Related