Fedora :: Finding Drivers For Wireless Adapter?

Mar 2, 2009

i have just installed Fedora 10 and now my wireless adapter doesn't work and i think it's because i need to install drivers for it.. I have been using Ubuntu for the last few weeks and it worked fine in ubuntu probably because ubuntu comes with drivers for my adapter already installed.. Now, i'm kind of newbie so i don't know where to look and what to do.I did lspci and here is my adapter.. Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)

View 1 Replies


ADVERTISEMENT

Ubuntu Networking :: Finding Drivers For Network Adapter?

Jun 30, 2010

I've installed it and it looks great. my problem is that I cant connect to the net since I could not find the driver for my onboard network adapter. it is a Gigabyte GA 945 GCM S2L board. of coarse I searched their site but it says that Linux driver I have to achieve from 3rd party. the adapter's chipset is a Realtek RTL 8111C but I could not find the driver for it. the only one that I've found - doesn't work. I must point out that when I've searched driver for my Nvidia display adapter- I've found it on Nvidia's site and it works great.

View 2 Replies View Related

Fedora Installation :: Madwifi Wireless Drivers For Built In Atheros Adapter?

Nov 19, 2010

I'm using LiveCD to test my laptop with FC 14. It booted from the LiveCD image last night, but my wireless didn't work. I need the madwifi wireless drivers for my built in Atheros adapter.

Can I download the latest and greatest madwifi drivers, compile them and use them while running from the LiveCD image?

View 4 Replies View Related

Ubuntu Networking :: Get Wireless Network Adapter To Be Read By 'Windows Wireless Drivers'

Nov 24, 2010

I recently reformatted and dual partitioned to both Windows 7 as well as ubuntu 10.10. Loading works fine and Windows 7 is 100% operational. I cannot seem to get my wireless network adapter to be read by Ubuntus 'Windows Wireless Drivers' gui. Here are the steps that I have done THUS far, to make sure that we are all on the right path. Before I go any further, my wireless network adapter is an old school WUSB11 Linksys Wireless Network Adapter (running version 2.6).

1) Downloaded and installed "ndiswrapper" from ubuntu's main website. I downloaded the common, utils and ndisgtk files and installed them accordingly.
2) I extracted these three files to the desktop of Ubuntu and accessed the terminal page.
3) From terminal I typed "cd Desktop" to change the directory to the desktop.
4) Next, I typed in "Sudo dpkg -i ndiswrapper-common_1.54-2ubuntu1_all.deb
Sudo dpkg -i ndiswrapper-utils-1.9_1.54-2ubuntu1_i386.deb
Sudo dpkg -i ndisgtk_0.8.5-1_i386.deb"
5) This installed Windows Wireless Drivers gui successfully and I can access it.
6) I have downloaded the driver files for the adapter from the cisco website and searched them for the required files needed.
7) After extracting the .INF file from the "Drivers" directory named "NETUSB.SYS" (I wasn't sure if the other associated files within the same folder needed to be present together with NETUSB so I moved everything to the desktop) I typed in "sudo ndiswrapper -i NETUSB.inf". After accessing the Windows Wireless Drivers gui I have noticed that the 'netusb' driver is present yet under it, the system states "Hardware present: No". This leads me to believe that maybe I installed incorrectly or my "fireware?" is not present? I was reading through the installation guide posted on the ubuntu website that in addition to the .INF file we also need the BIN file(s)? and SYS file(s)?.. The folder with the drivers for my adapter contains a BIN file but it is not within the "Drivers" section of the folder.
9) Upon mousing over the network Icon naturally my hardware is still not present.
10) From what I gather after the system finds the hardware I am to write into the terminal

[Code]....

View 2 Replies View Related

Software :: Installing Wireless Drivers With Atheros AR9285 Wireless Network Adapter?

Jan 12, 2011

I have recently installed Linux Mint 10 on my laptop. When I look at the Device Manager in Windows 7, it says I have an Atheros AR9285 Wireless Network Adapter. Right now, I am unable to connect to wifi with Linux. What drivers am I able to install, and how would I install them?

View 3 Replies View Related

Ubuntu Networking :: Belkin Enhanced Wireless USB Network Adapter - Windows Wireless Drivers App Doesn't Work

Feb 3, 2010

I have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:

[code]...

View 1 Replies View Related

CentOS 5 Hardware :: Finding And Installing A Driver For The Linksys WUSB300N Wireless Adapter?

Mar 23, 2010

finding and installing a driver for the Linksys WUSB300N wireless adapter.

View 1 Replies View Related

Ubuntu :: Can't Get Drivers For Wireless Adapter To Install

Feb 24, 2010

I'm booting from disc on a compaq presario F700. Somehow, I messed everything up and now it's not reading that I have an OS. Which was previously vista. Now, when I boot from disc and try to install no partitions come up. I did open the blasted thing to clean it not too long but as far as I know, nothing dislodged. It is a laptop, btw. So, my kneejerk reaction is that the hard-drive got damaged or knocked loose. I also tried using kill-drive to erase it so I could start fresh, also no Hard drive detected. So, I'm going to try that. In the meantime I have another issue. When booting from disc I can't seem to get the drivers for my wireless adapter to install. I have them. Madwifi for AR5001X but I don't know where to put them via terminal.

View 9 Replies View Related

Software :: Can't Seem To Find Drivers For Wireless Adapter

Mar 18, 2010

I can't seem to find drivers for my wireless adapter, TL-WN722NC, so that it can work on Linux (Ubuntu). I have already emailed the company, TP-Link, and they said that it does not support Linux yet.Is there a way that I might be able to get drivers for it somewhere else?

View 5 Replies View Related

Ubuntu Installation :: Drivers - 10.04 - Isn't Recognizing My Wireless Adapter

May 2, 2010

I am new to Linux and actually just finished my install about 30 minutes ago. Ubuntu 10.04 isn't recognizing my wireless adapter, so I need to install the drivers. I know where the drivers are, I just don't know how to install them on a Linux system.

Here is the driver page. I don't know how to download the .inf file (necessary?) but I have ndiswrapper, bcmwl5.sys, and sp33008.exe all in the downloads folder.

Apparently just double clicking the files does nothing, so what do I do now?

View 3 Replies View Related

Ubuntu :: Drivers For DLink DWA-130 REV E Draft N Usb Wireless Adapter?

Jul 14, 2010

i was given a new DLink DWA-130 REV E draft N usb wireless adapter and was wondering if there are linux drivers for it?

View 2 Replies View Related

OpenSUSE Hardware :: Install The Drivers For Wireless ... Rtl8187 11g USB Adapter

Feb 8, 2010

I need to install the drivers for wireless.... rtl8187 11g USB adapter... I have a opensuse 11.2

View 7 Replies View Related

Ubuntu / Apple :: Downloading And Installing Wireless Adapter Drivers?

Oct 21, 2010

I have a old mac G4 and I just recently installed ubuntu 10.10 on it. It doesn't recognize my wireless adapter at all so I get no wireless on the computer. I've never used any linux distribution in my life so I don't have any idea how to install drivers for it.

View 1 Replies View Related

Ubuntu Networking :: How To Install / Access Wireless USB Adapter Drivers

Mar 5, 2011

I really want to drop Windows, but wireless connectivity and frequent crashes are really discouraging me. I have a dual-boot W XP with Ubuntu 10.10. I do not have the computer on, so I'm writing this from my weak memory
USB Adapter - Netgear WNDA3100-100NAS = v2
The adapter works under W XP with no problems
The router, Linksys WRT54G sees the adapter in the dhcp table
lsusb lists the adapter.

I have copied the drivers from the install CD onto the desktop. I cannot figure out how to install or access those drivers for the installation. I tried to install the ndiswrapper from the software center, but the center shows it's available from the "main" source. I've looked in the package manager, but can't find it. When I go into terminal, and enter one of the suggested commands in the forums, it can't be located. I have a Belkin F5D8010 installed on this computer, and it works great under W XP. I want to try to get this installed, but until I can figure out installation of the ndiswrapper and how to access it, and get the drivers recognized, I'm at a standstill.

View 1 Replies View Related

Ubuntu Networking :: Belkin Wireless G USB Adapter Software/Drivers For 11.04?

Jun 17, 2011

I have just installed Ubuntu 11.04 on an old machine to get a feel for it. No problems with the install, but I don't have a LAN connection lead spare so I'm trying to install my Belkin Wireless G USB Adapter (K75-F5D7050B which requires version 3 according to the Belkin site).

Unfortunately I can't find any Ubuntu software & driver versions on their site and I only have a windows installation disc.

View 8 Replies View Related

General :: Finding Drivers For Dynex Wireless Card?

Feb 15, 2011

I just installed it along side of Windows 7. I have a Dynex wireless PCI card that I cannot get to work. I am also new to using a Command Prompt

View 7 Replies View Related

Debian Installation :: Integrate Wireless Adapter Drivers To Install Media?

May 13, 2010

I downloaded from the following link: [url]... etinst.iso and i have a working flash drive Debian installer. I would like to be able to integrate driver support for my wireless adapter or my gprs phone for internet access during install so that I wont have to be connected via ethernet.

View 2 Replies View Related

Ubuntu Networking :: Loading Native Drivers For Realtek Wireless Adapter?

Feb 12, 2011

Just made the jump to Ubuntu, and until this install I considered myself very tech savvy. Now not so much! Built my new desktop, loaded Ubuntu 64 bit no problem. But I'm having a terrible time figuring out how to load the native driver for my realtek wireless adapter. I successfully un-tarred the file, and used the terminal to run the make command by using cd command to navigate to the file. It returned a wall of text, and in my mind looked to work. Next I go to run "./clean" in the same file location in the terminal and it returns:

"ERROR: Module r8192s_usb does not exist in /proc/modules
ERROR: Module ieee80211_rsl does not exist in /proc/modules
ERROR: Module ieee80211_crypt_ccmp does not exist in /proc/modules
ERROR: Module ieee80211_crypt_tkip does not exist in /proc/modules
ERROR: Module ieee80211_crypt_wep does not exist in /proc/modules
ERROR: Module ieee80211_crypt does not exist in /proc/modules

Not completely sure if this is an issue, I try moving to the next step of instructions issuing the command "insmod 8712u.ko" in the terminal same file location and get the error message
insmod: error inserting '8712u.ko': -1 Operation not permitted
I've tried running "sudo insmod 8712u.ko" from both that file directory, and from my home file directory. My guess is I'm missing a step or need to be typing these commands in a different file directory in the terminal.

View 1 Replies View Related

Ubuntu :: Installing Drivers For Wireless Usb Adapter / Error Inserting '8192cu.ko'?

Sep 1, 2011

im trying to install the RTL8192CU_linux_v3.0.2164.20110715 drivers so my new wireless adapter works, but I have hit a wall when trying to insert the drivers after makeing them its telling me

"-VGN-NS325J:~/wifi/driver/8188$ insmod 8192cu.ko
insmod: error inserting '8192cu.ko': -1 Operation not permitted

View 5 Replies View Related

Ubuntu Networking :: Drivers For Belkin Double N And Wireless Networking USB Adapter?

Aug 3, 2010

Ok, so I am needing some drivers and I've been googling like hell to find em, however, I can never seem to find any. My adapter model is F6D6050v1.

PS: when I try sudo ndisgtk it comes up with command not found.

View 1 Replies View Related

Fedora Hardware :: Serial Port Adapter - Cannot Install Drivers

Feb 4, 2010

Does an have Mocship MCS9901 adapter in use. I cannot even install driver. Is ti the PC adapter between since this is express card. What to do?.

make[1]: *** [_module_/home/Xx_Xxx/Desktop/MCS9901_Linux/version1.6/starex] Error 2
make[1]: Leaving directory `/usr/src/kernels/2.6.31.12-174.2.3.fc12.i686'
make: *** [default] Error 2

View 3 Replies View Related

Fedora Hardware :: Atheros Wireless Adapter -- "Enable Wireless" Checkbox Will Not Stay Checked?

Mar 23, 2011

It worked on install but quit after the first system update. The "Enable Wireless" checkbox will not stay checked. I've attempted to manually install the madwifi driver to no avail.

kernel: 2.6.35.11-83.fc14.x86_64

device: Atheros AR928X wireless adapter

View 7 Replies View Related

Fedora Networking :: Can't Use Wireless Usb Adapter

Dec 11, 2009

I just installed the driver for my D-link DWA160 adapter, And now I cant seem to get it working.

View 6 Replies View Related

Red Hat / Fedora :: Can't Setup Of Wireless Adapter

Apr 2, 2010

I am having issues with the setup of my wireless adapter. what I am missing? I have installed

# yum --nogpgcheck localinstall kmod-rt2870-2.6.32.10-90.fc12.i686-2.1.2.0-6.fc12.13.i686.rpm rt2870-2.1.2.0-2.fc12.noarch.rpm
# lsusb | grep -i ralink
Bus 001 Device 004: ID 148f:2770 Ralink Technology, Corp.
#
[Code]....

View 14 Replies View Related

Fedora Networking :: Wireless USB Adapter Not Connecting: F10

Nov 12, 2009

I have a wireless USB (TP-Link TL-WN620G) adapter on F10( 2.6.27.38-170.2.113.fc10.i686). I have installed the drivers and it is detecting my router. But it keeps asking for network password with repeating a dialogue box although I entered correct password. I have configured the wireless configuration using NetworkManager.

View 6 Replies View Related

Fedora Networking :: D-Link DWA-125 Wireless 150 USB Adapter?

May 29, 2010

I have "D-Link DWA-125 Wireless 150 USB Adapter". I can use this wireless adapter on my laptop, i can use it on my desktop as well but only when windows is running, im a newbie to fedora, today is my 2nd day and 3rd night, so pretty exited about it. i have installed fedora 13 on a different hard-disk on my desktop. when the computer is booting, there is an orange light on the adapter glowing, it turns off when the computer reaches the fedora loading screen. If i see fedora's Network Configuration window under the hardware's tab i see the "D-Link DWA-125 Wireless 150 USB Adapter" listed along with my lan card. Now if i go towards the clock on the top right to get the wireless connection working, it shows wireless network disconnected. I have tried creating wireless connection manually by inserting the SSID, macadress, BSSID, ,WPA passkey etc, but still doesnt works. when i try connecting using hidden wireless connection, i receive window for inserting keyring password again and again, stating that the login password does not match. but during all this time, i still havent seen the orange light glowing activity on the external usb adapter. If i restart the computer in windows the adapter/wireless connection works. also have checked the Network service, it seems that the service is up and running. i really require some assisstance on this,

i have noticed this, that if i go under network configuration. the first tab over there, inside devices i cant see my D-Link adapter, but if i switch onto the hardware tab it shows my lan card as well as my D-Link adapter. so does it means that the driver is missing? or any service which is disabled, however at this point of time i can get only using wired connection. please assist me. with this issue, im also downloading the 500 complete update as well for fedora, hoping that it may make it work.

View 14 Replies View Related

Fedora Hardware :: WPN111 Wireless Adapter In 14?

Nov 10, 2010

How do I go about getting my Netgear WPN111 to work?

View 3 Replies View Related

Fedora Networking :: Wireless-G USB Network Adapter Setup For 12

Jul 14, 2010

To setup a Compact Wireless-G USB Network Adapter (WUSB54GC) on Fedora 12 ?

View 1 Replies View Related

Fedora Networking :: Suggest Wireless-N Adapter (USB Or PCI) That Is Well Supported Under F13?

Nov 26, 2010

Can anyone suggest a wireless-N adapter (USB or PCI) that is well supported under F13? And do you think an upgrade from G to N is worth it? I'm probably going to upgrade my router to N in any case as the old one is buggy and/or dying.

View 2 Replies View Related

Fedora Hardware :: Belkin Wireless USB Adapter F5D7050 In F14?

Dec 15, 2010

I have a Belkin G Wireless USB Network Adapter that I cannot get working for the life of me...USB adapter hardware: F5D7050 Ver. 3136 (v3000) Below are ouputs after a fresh install... Then I tried to install the newest drivers from ralink [URL] I blacklisted the current drivers and installed these and everything looked the same as before. Even if i blacklist the 3 drivers

rt2500usb
rt2x00lib
rt2x00usb

They are still loading at boot. Is there any way to make this work. I would try ndiswrapper but even when blacklisting those above, they are still loading.

System: HP G50 Laptop with on-board atheros card that used to work, but now even has issues in windows

Code:

$ lspci

Code:

02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)

Code:

$ lsusb

Code:

Bus 002 Device 002: ID 050d:705a Belkin Components F5D7050 Wireless G Adapter v3000 [Ralink RT2573] With a fresh F14 install, I plug the device in, does not light up or work, yet shows in network manager

Wireless Network (Atheros 5001 Wireless Network Adapter)
wireless is disabled
Wireless Network (Belkin 54g USB Network Adapter)
wireless is disabled

I cannot click on either of these. So I check dmesg...

Code:

$ dmesg

Code:

[ 736.739057] usb 2-3: new high speed USB device using ehci_hcd and address 2
[ 737.026971] usb 2-3: New USB device found, idVendor=050d, idProduct=705a
[ 737.026978] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[code].....

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved