Any one had any success enabling openGl in fedora 14? I tired and failed; as well, kmod seems to have disappeared and the resolution has dropped from 1920X1080 to 1280X1024, and stock there cannot be adjusted higher only can go down, as well the KRandRTray once clicked, ten to vanish.
View 5 RepliesG'day. My distro is Fedora 13. I received the above subject error message at boot. My /etc/fstab is attached as follow:
#
# /etc/fstab
# Created by anaconda on Fri Mar 5 12:44:10 2010
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
[code].....
I just upgraded from FC8 (32-bit) to FC11 (64-bit). In doing so, I backed up my entire World of Warcraft folder so I could try to avoid having to download and install it all over again. However, I've now reinstalled wine (64-bit now), and the nvidia drivers from the rpmfusion repos (also 64-bit), and when I try to start WoW, it says it cannot load OpenGL. I'm wondering if anyone knows what's up, and if there's a solution that doesn't involve reinstalling WoW.
View 7 Replies View RelatedWhenever I boot my system, I get this error:
Quote:
Enabling the nvidia driver: /etc/rc.d/init.d/functions: line 530: 1254 Segmentation fault [FAILED]
I also noticed that 3d acceleration was not working... I always launch Blender to test if 3d works, but not luck
My system:
Code:
2.6.33.5-124.fc13.x86_64
Nvidia GeForce 9800Gt
akmod-nvidia 195.36.24
Yes, nouveau is blacklisted:
Quote:
kernel /vmlinuz-2.6.33.5-124.fc13.x86_64 ro root=/dev/mapper/vg_desktop-lv_root rd_LVM_LV=vg_desktop/lv_root rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rdblacklist=nouveau
[code]....
I have recently updated my ATI drivers to Catalyst 10.10 (ati-driver-installer-10-10-x86.x86_64.run) from the AMD website and I have not been able to get KWin to enable compositing.
I am using:
openSUSE 11.3 x64
KDE 4.5.2
[code]....
I have installed torcs (using sbopkg) and the dependencies plib, OpenAL, and freealut. On running it I get
Quote:
GLUT: Fatal Error in torcs-bin: failed to create OpenGL rendering context.
I am not sure if it is relevant but this is xorg.conf
Quote:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder62) Tue Jul 28 19:48:57 PDT 2009
Section "ServerLayout"
[code]....
I'm trying to put the geant4 program on my computer and I need to install openGL first. I need the glut.h file and gl.h file in order to do this but I can't seem to find them anywhere online. I am using Fedora 14.
View 2 Replies View RelatedI'm noticing that the performance for FreeNX Server under Fedora Core 14 is really bad. The screen refreshing is painfully slow. I'm thinking maybe the issue is related to the use of opengl in the X driver? how I can disable opengl entirely, so that the X server is only using 2d rendering?
View 2 Replies View RelatedI'm trying to get a program to compile with OpenGL support and it's saying that the headers are missing. But I think (or thought!) that I already had Open GL up and running. My suspicion is that I need to install the appropriate -devel files...but I just can't seem to find them. Furthermore, I don't want to tweak my system and install proprietary Nvidia drivers if things are already working just fine.
I have a Geforce 8300 GS in a i586 32bit Dell Inspiron 530. I'm trying to compile Cinelarra and keep getting:
Quote:
OpenGL 2.0 libraries missing Hardware acceleration using OpenGL 2.0 is disabled
Does anyone know which driver (ie: 96xx? 173xx?) I should be using for this? Where are these libraries? How can I find them and tell Cinelarra where to look?
And even more basically: How do I tell if OpenGL is working or not? Maybe I don't have them afterall..
I tried again (with easylife this time) and I got the same result - once the kmod was finished I just got a cursor - so two tries with two different methods, same result. So, is there a generic type driver that will at least take advantage of some of the features of my geforce 6800?
View 10 Replies View RelatedIn the past I've played around with OpenGL development using the Mesa library. I have F13 installed now and would like to further explore OpenGL, but am trying out the default Nouveau/Gallium3d setup. As I understand Gallium3d is intended to replace Mesa3d so I'm at a loss as to what packages need installing to provide the header files and such needed to build OpenGL applications as a search for Gallium turns up nothing in the repos.
View 6 Replies View RelatedI have a x86_64 i5 processor running Fedora 13.When I run the make file,I get the following error.Can someone help me out please?
# make
making all in ./lib...
make[1]: Entering directory `/home/Anil/Downloads/glut-3.7/lib'
[code]....
i have installed nvidia driver, but after yum update not work anymore
fedora 12, nvidia 6200
output:
Code:
MPlayer SVN-r29800-4.4.2 (C) 2000-2009 MPlayer Team
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
[Code]....
I am running Fedora 13 with the nvidia blob for OpenGL hw acceleration, everything x86_64. I have spent a couple of days trying to get either Morrowing (TES3) or Oblivion (TES4) working under wine, unfortunately without success.
I have tried several flavors of wine: 64-bit wine from the fedora 13 repo, 32-bit wine from the fedora 13 repos, 32-bit wine 1.3.2 built from source. In all cases, running either of the games I get the same error (using WINEDEBUG=+d3d): "Direct3D requires OpenGL support." Appareantly wine d3d layer can't access to the nvidia OpenGL driver, and therefore d3d is disabled within wine -- making the two games not to start up.
I have tried looking around for a solution, but in all cases I found the root of the problem was missing OpenGL support / missing drivers. This is not my case; I use OpenGL everyday, and hardware acceleration is clearly supported in my configuration (confirmed with `glxinfo | grep direct`).
I think that wine might have problems accessing the 64-bit ogl drivers, but I don't know how to confirm it, and even less how to solve it. Clearly, installing Windows is not an option
My friend just recently gave me an Nvidea Geforce 4 64mb, and it is supposed to be better than my ATI x700 Pro. I was wondering if there was openGL support for this card, and how do i replace it with my ATI card?
View 1 Replies View RelatedI have verified using yum that I have the most uptodate glut, freeglut, freeglut-devel etc., yet when I compile Example 2-6 from the Red Book at http://www.glprogramming.com/red/chapter02.html#name16, I get a window that is too small for the program output, includes display from other windows, and will not redraw after being resized.
I get slightly better behavior with the SGI sample program mentioned in the same book, 'checkers.c'. Again, the initial size is too small, but at least it will resize and redraw the checkerboards entirely inside the resized window. What is going on here? Is this some bug in glut? I can't see anything obviously wrong in their glut initialization, which looks like:
int main(int argc, char** argv)
{
glutInit(&argc, argv);
glutInitDisplayMode (GLUT_SINGLE | GLUT_RGB);
glutInitWindowSize (350, 150);
[code]...
Then again, since I am such a newbie to glut, I am not sure I would recognize what, if anything, they did wrong. what ARE the valid and useful command line parameters I could have passed to the main() above?
when I tried to configure network I came across a problem that the enable button on top of network manager GUI is disabled. So alternatively I enabled it with ifconfig command. I also configured DNS servers. But the problem is whenever I reboot my machine. I have to reactivate the network from terminal and give the DNS servers again, because DNS settings are not saved.
View 2 Replies View RelatedIs there an easy way to enable libfaac in ffmpeg? I'm hoping to not have to compile it myself, but it appears that it was compiled without libfaac support. Not sure if what I'm using is from rpmfusion, but it's enabled.
View 9 Replies View RelatedI'm having a bit of trouble with a web server running Fedora 12. Apache works fine, and serves up php content without a hitch. My problem is SQLite -- I thought that it was built into php5, but support is disabled in the repo version. phpinfo shows this as part of the configure command:
Code:
'--without-sqlite' ... '--disable-pdo' ... '--without-sqlite3'
The only solution I've read anywhere is "compile php from source," but I'd like to avoid that if possible, for ease of future upgrades. Is there a way to convince php to use sqlite despite its current state?
I have various repos in my yum.repos.d including rawhide, google, and various others which I can enable on specific yum commands with --enablerepo=reponame.
Question is, how come these aren't enabled by default? When I do a yum repolist they don't show up, which effectively leaves orphan programs.
I can see why you might not want rawhide enabled by default for obvious update reasons, but I might want others to be enabled by default, like google for one.
So how is the default repo anabling/disabling controlled?
My laptop (as many others) has a hardware switch which turns wireless/bluetooth disabled. If after booting up the system I switch on this key, the wireless would still remain disabled and I need to reboot the system to be able to connect to any network.
I have tried
Code:
rfkill unblock all
ifconfig wlan0 up
Is there any way to activate wireless without rebooting the system?
I recently switched to Fedora from Debian (Fedora 12 LXDE Spin), and the one thing that bothers me is that I can't find a way to enable tapping on the mousepad to click. So far the solutions I've found have included editing the xorg.conf, which, to my understanding, is no longer included in the Fedora kernel.
View 1 Replies View Relatedi've enabled quotas for a user on my fedora 10 distro but whenever i reboot the machine the boot.log contains the following message :"Enabling local filesystem after every startup i have to login as root and issue the quotaon -auv command to reenable quotas.what causes this failure on startup ? is there a workaround to solve this problem ?there is plenty of free space on the root partition that quotas are enabled.
View 2 Replies View RelatedI have al ready Fedora 11 [Leonidas], and when i did copy my old website to /var/www/html/wiki i had this problem trying [URL] : Forbidden You don't have permission to access /wiki/ on this server... i had to type this commands:
[Code]...
I'm facing some problems with FC11 in my PPC G4. I tried installing and everything went well until it reaches a stage where I'm being prompted to select my network interface.
The options are: wlan and eth0
But no matter which one I choose I still get this error "An error occurred trying to bring up the wlan0 (or eth0) network interface". And if I click cancel, the installation aborts. how can I can FC installed??
Back during the early days of live usb drives (F9) before persistent overlays were not ready for prime time, I created an approach to do persistence by injecting a special rc.local file into my custom live usb spin. This script mounts a file containing an encrypted ext3 filesystem using losetup which prompts for a password.
This scheme worked well for F9 and F10 but is now broken for F11 because the keyboard is not enabled at the time rc.local is executed. Obviously, all the work done to F11 for speeding up the boot time and moving the boot to the first console has broken my approach.
I'm having difficulty enabling X11 bitmap fonts for GTK apps in F13. From all I've read on this forum and elsewhere on the Internet, this normally just requires symlinking 70-yes-bitmaps.conf into /etc/fonts/conf.d, but I can't get this to work properly.
X11 bitmap fonts are available to X11. I have them working in xterms, but no GTK applications.
What I've tried so far:
- Symlinked /etc/fonts/conf.avail/70-yes-bitmaps.conf to /etc/fonts/conf.d
Manually added font path to xorg.conf to force it to be picked up:
Code:
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
EndSection
/usr/share/X11/fonts/misc is symlinked in /etc/X11/fontpath.d
[Code]....
I was told to simply go into the fstab folder to allow myself permissions to execute files without becoming root, but instead of following it blindly I need a 2nd opinion. I cannot install a specific program because of configuration problems even though I downloaded all the gcc, g++ etc packages.
View 14 Replies View RelatedIn short, attached a terminal screenshot of me trying to install hplip. Why hplip-3.9.10.run doesn't recognize the fact that gcc has already been installed? In detail: I have HP PSC 1210 connected to a Windoze XP machine. I want to enable network printing, but the only printer showing up standard in the F12 drivers is the HP PSC 1200. When I use that one, I reach the printer, and the Windoze printer queue, but no matter how long I wait, nothing ever comes out of the printer. It'll start moving like "I'm about to print!" but then does nothing. So through the hp-opensource website I determined which driver I want, and get a long way into installing the file. It hangs up on the attached screenshot.
View 12 Replies View Relatedtrying to bring back to useful ife an old laptop: an Acer 1360.
I have installed kmod-ndiswrapper to assist me. The laptop has one of these:
Quote:
00:0a.0 Ethernet controller: Linksys, A Division of Cisco Systems [AirConn] INPROCOMM IPN 2220 Wireless LAN Adapter (rev 01)
I have grabbed the Windows drivers for this card and installed:
Quote:
[graham@old-acer ~]$ ndiswrapper -l
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
neti2220 : driver installed
device (17FE:2220) present
lsmod shows:
Quote:
ndiswrapper 158060 0
Looking good to me - (is that conf file required an issue?) but Network Manager doesn't recognise that I have any wlan running at all. The Wifi button on the laptop is on but 'red' and not 'green' for up and running.
Um. Next steps? I suppose I could buy a compatible wifi card and slap it in?