Fedora :: Booting - Error "EXT4-fs(sda): Error Loading Journal Mount: Wrong Fs Type, Bad Option, Bad Superblock On /dev/sda8"

Feb 4, 2010

I have installed both Windows Xp and Fedora 12. Last time when i was working on Fedora it didn't shut down properly. Now following error occurs and finally the system sleeps.

ata1.00 : exception Emask 0x0 Sact 0x0 SErr 0x0 action 0x0
ata1.00 : BMDMA stat 0x25
ata1.00 : cmd c8/00:00:50:5a:34/00:00:00:00:00/e4 tag 0 dma 131072 1n
res 51/40:7f:d1:5a:34//00:00:00:00:00/e4 Emask 0x9 (media error)
ata1.00 : status : { DRDY ERR }
ata1.00 : err : { UNC }
end_request: I/O error, dev sda, sector 70539985 JBD : Failed to read block at offset 5884 EXT4-fs(sda): error loading journal mount: wrong fs type, bad option, bad superblock on /dev/sda8, codepage or helper program, or other error In some case useful info is found in syslog-ty dmesg | tail or so

View 1 Replies


ADVERTISEMENT

Ubuntu :: Hard Disc Failure - Error Mounting: Mount: Wrong Fs Type, Bad Option, Bad Superblock ?

Apr 18, 2011

Ubuntu 10.04 has just failed to load from my hard drive, so I've resorted to booting from CD just to get the machine going.I'm wondering if my main boot drive has gone caput??When trying to mount it using DISK UTILITY...get the message: Error mounting volume

Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sdb1,missing codepage or helper program, or other error.In some cases useful info is found in syslog - try dmesg | tail or so

View 5 Replies View Related

Server :: Mounting Drive Bad Superblock Error Wrong Fs Type, Bad Option, Bad Superblock On /dev/sda1?

Jun 16, 2010

I have a x64 OpenSUSE server with two hard drivers installed. The first one is used for the / and /home partitions and the other is for backups. Ironically enough it is the backup hard drive I am having trouble with. I was having trouble writting to the drive and unmounted it to preform a fchsk, however now when ever I try to mount it I get the following error:

mount: wrong fs type, bad option, bad superblock on /dev/sda1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so

Does anyone know who I can repair the drive and retrive data?

View 1 Replies View Related

Red Hat / Fedora :: Mount: Wrong Fs Type, Bad Option, Bad Superblock On Server3:/programs

Jan 9, 2011

I have been trying to mount an NFS share from my REHL server for over an hour, and Google was not able to help me. when I use the command:

mount -t nfs server3:/programs /programs

I get the folowing error :

mount: wrong fs type, bad option, bad superblock on server3:/programs,
missing codepage or helper program, or other error
(for several filesystems (e.g. nfs, cifs) you might
need a /sbin/mount.<type> helper program)
In some cases useful info is found in syslog - try
dmesg | tail or so

View 4 Replies View Related

General :: Corrupted Partition Table / Error Mounting: Wrong Fs Type, Bad Option, Bad Superblock?

Oct 23, 2010

i used to have ubuntu 9.i decided to move to sabayon so i used the live cd to install it ,resize the ubuntu partition and use the remaining space for sabayon.while the resizing procedure i got an error(i dont have a copy of the error log file but i know it has something to do with an anaconda process).i aborted the installation and the result was an filesystem that couldnt be mounted.when i try to mount the hdd i get this:

Code: Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so and this is what i get from fsck: Code: $ sudo fsck -f /dev/sdb1
code....

View 5 Replies View Related

Fedora Hardware :: Hard Drives Keep Crashing - Mount: Wrong Fs Type, Bad Option, Bad Superblock

Aug 26, 2010

I am writing as yesterday, my fourth hard drive within 2 years crashed. Is that normal? One was crashing 2 years ago, one in winter 2009 and 2 just within 2 weeks. What can be the reason for so many crashes? I heard maybe the power supply? How can I find out if that's broken? The voltages at least in BIOS seem normal. The SATA controller? How do I know if its broken? Can I just but one PCI-E card with SATA adapters? Is it the motherboard? Theres not much more in my computer... As well, its wired that my good-old 160 GB drive never crashed, only constantly the bigger ones. Here some typical error code from mount and dmesg:

Code: mount: wrong fs type, bad option, bad superblock on /dev/sdb2, missing codepage or helper program, or other error

ata2.00: status: { DRDY ERR }
ata2.00: error: { UNC }
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x4
[Code]....

View 8 Replies View Related

General :: SD Card Mount - Error "wrong Fs Type, Bad Option"

Apr 12, 2010

I am trying to make a copy of the SD card that my TS-7800 SBC boots from. When I plug the SD into my opensuse pc I get this error. Error mounting: mount exited with exit code 32: mount: wrong fs type, bad option, bad superblock on /dev/sdb4, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so There are four partitions on this card and I can only access one of them.

dmesg | tail gives me this

[894.422497] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended

when I do e2fsck -p /dev/sdb4 I get

e2fsck: Bad magic number in super-block while trying to open /dev/sdb4 /dev/sdb4: The superblock could not be read or does not describe a correct ext2 file system. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> I was hoping I could just plug in both cards and do this dd if=/dev/sdb of=/dev/sdc to copy everything and have a back up SD card.

View 5 Replies View Related

Red Hat / Fedora :: Boot Error Mount: Unknown Filesystem Type 'ext4'

Feb 5, 2010

i am trying to compile kernel 2.6.23 on Fedora 12 After fixing a few bugs (getline error, %dil ,etc) i was able to compile the kernel made initramfs img using dracut updated grub and then booted up the new kernel 2.6.23 but it fails to boot with following error mount: unknown filesystem type 'ext4'

View 8 Replies View Related

CentOS 5 :: Can't Mount DVD - Wrong Fs, Bad Option, Bad Superblock?

May 14, 2010

I am having trouble mounting DVD+Rs. I get the following error whenever I try -mount: block device /dev/hda is write-protected, mounting read-only mount: wrong fs type, bad option, bad superblock on /dev/hda, missing codepage or other error In some cases useful info is found in syslog - try dmesg | tail or so

View 8 Replies View Related

Ubuntu :: Error - Superblock Has An Invalid Journal (inode Clear? <y>

Apr 7, 2011

I was trying to move my home partition on Ubuntu, and the computer hibernated on me. I restarted it up on the live disk to survey the damage, to find that the home partition, according to fsck, "Superblock has an invalid journal (inode Clear? <y>"

It cannot be mounted, either.

View 3 Replies View Related

Software :: (DVD Error) Mount - Wrong FS Type

Jul 14, 2011

A colleague had troubles with a DVD that contains valuable data, no further backup available. The DVD won't run and I am trying to fix it. Have been playing around on Mac, Windows and Linux successively.

On Mac
Mac shows this message in Toast Titanium 10:
but Finder keeps telling it is an empty disc, no way to get to the files.

On Windows
Windows 7 in VMWare is not of any help.

On Linux
Just installed Ubuntu 11.04 (in VMWare) and did some checks using info on this forum. When trying to mount the disc, this is the error message. Then I used fdisk on the volume (/dev/sr0) and tried fsck. I downloaded UDFTools but cannot find any repair option like udffsck as described in this thread by the last author.

I am running out of inspiration... there are clearly data on the disc, which can be seen by just looking at its surface, but also the info on Mac. However, there might be some bad sector size in the partition table which renders it unreadable. How to recover these data?

View 2 Replies View Related

Ubuntu Installation :: Error - The Attempt To Mount A File System With Type Ext4 In SCSI1 (0,0,0), Partition #1 (sda) At /failed

Oct 15, 2010

Unable to install Ubuntu 9.10 on a new internal harddrive. The hardrive contains no operating system. This hardrive is the only drive present in the system.

Whenever the installation trys to mount the ext4 partition the following error appears: The attempt to mount a file system with type ext4 in SCSI1 (0,0,0), partition #1 (sda) at /failed

Iv'e tried over and over to get past this error to no avail.

View 6 Replies View Related

Debian Configuration :: Error "mount Exited With Exit Code 1: Helper Failed With: Mount: Wrong Fs Type" Mounting Any External Storage Media

Feb 27, 2011

I've just made the switch from Ubuntu to Debian Squeeze and am having trouble connecting external media (be it a USB stick or an ext HD). The error I am getting when I connect anything via usb is the following:

Error mounting: mount exited with exit code 1: helper failed with: mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error.

View 4 Replies View Related

Debian :: Laptop Will Not Boot - Error Loading Journal

Apr 13, 2011

I have a laptop with important data (no backup) that will not boot. It's a vanilla Debian 6 amd64 with dm-crypt LUKs encryption to a internal sata drive partitioned sda1 sda2 sda5 with lvm2 formatted ext3 for sda5. The symptom is that upon powering up, it progresses (albeit slowly now) past grub, to the point where the the "Enter passphrase" prompt occurs. After entering the phrase, it pauses with "Reading all physical volumes. This may take a while". It seems to work, but then gives me errors like:

ata3.00: status: {DRDY ERR }
ata3.00: error: { UNC }
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: failed command READ DMA EXT
...some more stuff...
end_request: I/O error:, dev sda, sector 308725410
JBD: Failed to read block at offset 24711
EXT3-fs: error loading journal
and it drops me to Busybox ash shell. My impression is that the sda1 partition with the kernel is intact, but the sda2 or sda5 is bad.

What else I have done:
1. Removed problem disk and installed it into another known good laptop. Issue occurs with new laptop. So, I would assume hd is bad, laptop is good.
2. Booted from hd using grub rescue mode. Similar errors occurred.
3. Using suspect laptop and hd, booted into a live cd environment, which attempted to mount the encrypted drive. It prompted for the passphrase, but said it could not mount the drive.

View 1 Replies View Related

Ubuntu Installation :: Bad Superblock - Wrong FS Type

Jan 4, 2010

I cannot for the life of me get my HD working again. I tried following all the various remedies I could find but to no avail.

Code:
ubuntu@ubuntu:~$ sudo e2fsck -f /dev/sda1
e2fsck 1.41.4 (27-Jan-2009)
e2fsck: Attempt to read block from filesystem resulted in short read while trying to open /dev/sda1
Could this be a zero-length partition?

Code:
ubuntu@ubuntu:~$ sudo dumpe2fs -f /dev/sda1 | grep -i superblock
dumpe2fs 1.41.4 (27-Jan-2009)
dumpe2fs: Attempt to read block from filesystem resulted in short read while trying to open /dev/sda1
Couldn't find valid filesystem superblock.

It goes on and one like this. I'm stuck using the LiveCD for now (Jaunty) so I have some limitations.

View 1 Replies View Related

Fedora :: Error "unable To Access Resume Device (LABEL=SWAP-sda8)

Mar 7, 2010

I have FC6 system with kernel 2.6.22.14-72.fc6 When I rebooted my system, I got error message "unable to access resume device (LABEL=SWAP-sda8) then it went to fsck automatically to all the partition and then stop (failed)

Checking filesystems
/1:clean, 10543/2560864 files, 204494/2560359 blocks
fsck.ext3: unable to resolve 'LABEL=/backup'
/boot: clean, 155076/19546112 files, 13456168/39072080 blocks

[Code]...

View 14 Replies View Related

Ubuntu :: Error Mounting: Mount: /dev/sdd1: Can't Read Superblock

Jul 6, 2010

what does this error message mean? im trying to mount an ipod in disc mode. let me know if there is a way to manually mount it to get around this. but not too technical, the simpler the language, the easier i will understand it.

View 9 Replies View Related

Ubuntu :: Can't Load A Drive / Volume - "Unable To Mount Location Error Mounting: Mount: /dev/sda1: Can't Read Superblock"

Dec 25, 2010

I have a problem in my ubuntu 10.01 that it can't load a drive/volume in ubuntu. When I tried, it said: "Unable to mount location Error mounting: mount: /dev/sda1: can't read superblock". And when I boot my pc with 'Windows', it said : "UNMOUNTABLE_BOOT_VOLUME" under a blue screen. What can I do to solve this problem?

View 9 Replies View Related

Software :: Mounting ISO Image - Wrong FS Type Error

Apr 4, 2010

I'm trying to mount hg2.iso, the Heavy Gear 2 iso image that I converted from hg2.nrg using nrg2iso, and this is what I keep getting:
Code:
bash-3.1# mount -o loop -t iso9660 hg2.iso /mnt/iso
mount: wrong fs type, bad option, bad superblock on /dev/loop0,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try demsg | tail or so

View 7 Replies View Related

OpenSUSE Install :: Error Message Was 'bad Magic Number, Corrupt Superblock' With A Suggested Command To Try Another Superblock?

May 14, 2011

After several crashes during videos it seemed like a good idea to fsck root. Downloaded the latest systemrescuecd and ran it at boot. The error message was 'bad magic number, corrupt superblock' with a suggested command to try another superblock. That failed with the same message. Tried tune2fs to force fsck at boot and got the same message. The drive is less than 6 months old and the installed system is working more or less ok. The command I used was 'fsck.ext4 /dev/sdc2'. What am I doing wrong?

View 9 Replies View Related

Ubuntu :: Cannot Mount, Bad Fs, Option Or Superblock FSCK?

Aug 23, 2011

The HDD is a 500GB internal SATA, The smart claims that the "file system is not clean" but is still green.FSCK ran a few errors and using fsck i copied a new superblock from a backup location, It still won't let me mount and FSCK is still trying to fix a TON of errors. I'm sorry I don't know any of this yet, but I'm concerned that FSCK could be destroying the data on the drive, for example photos and other important things. FSCK is coming with a lot of things to fix, It's gone from trying to fix errors in free blocks of group #1 to over #3000.. Is this safe? Will this work? Can I get rid of whatever caused this problem in the first place?

View 1 Replies View Related

Ubuntu :: Mount -o Loop - Flash BIOS Error "Intel UCode Loading Error" - Make Iso Images Bootsble From The Harddisk

Feb 19, 2010

I need to flash my BIOS to get rid of an error: "Intel uCode loading error". On [URL] I have found a tutorial, that looks to be fine. I can even see in the comments, that somebody have done this with success from Ubuntu 9.04, the very same system, that I use. Nevertheless I cannot make this bootCD with my Ubuntu 9.04, as it doesn't know the loop option to mount the image.

In the tutorial it says: "Requirements for this step is that you have support for the vfat and loop file systems in the kernel. Or you can have those features compiled as modules. In the latter case you can load the modules before the next step, like this:

modprobe vfat
modprobe loop"

loop doesn't seem to be present in my system, and the command modprobe loop returns an error that the module is not available. I tried to follow the tutorial anyway, but with no success. How can I get the module lopp? I also want to use it to make iso images bootsble from the harddisk.

View 2 Replies View Related

Fedora Installation :: Error: /sbin/load_policy:error While Loading Shared Libraries

Mar 12, 2010

I tried to install Fedora 12 on my machine using the Fedora-12-i386-DVD and get the following error: /sbin/load_policy:error while loading shared libraries: lib/libsepol.so.1: cannot read the file data:input/output error exec of anaconda failed install exited abnormally [1/1]

View 2 Replies View Related

Fedora :: Error: Skype: Error While Loading Shared Libraries

Feb 6, 2010

Just trying to install Skype on Fedora 12 .. but got an error: skype: error while loading shared libraries: libasound.so.2: cannot open shared object file: No such file or directory So, anyone got it working there ?

View 9 Replies View Related

Slackware :: Kernel Tries To Mount Wrong FS Type?

Aug 13, 2010

I just installed Slackware 13.1 x86 on a new laptop (you probably remember me from my audio post). I am having one other issue. My root file system is formatted as EXT4. When my computer boots, it tries to mount it as EXT3 then EXT2, fails both types and then tries EXT4. Here are the messages.

Code:
EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda2): mounted filesystem with ordered data mode
So, eventually / is mounted correctly, but I think this is slowing down my boot time. Does anyone know how to fix this.

View 13 Replies View Related

OpenSUSE Install :: Read All Others Already ... Error: Mount: Unknown Filesystem Type 'crypto_LUKS'

Feb 21, 2010

Formated new drive with ext3 on external drive on Suse 11.1 When upgraded to 11.2, drive was not connected... Could not get mounted after that... Set up another boot drive, could not get to mount. Found post with following:

>cryptsetup luksOpen /dev/sde1 restore
>mkdir /restore
>mount /dev/sde1 /restore

Error as follows: mount: unknown filesystem type 'crypto_LUKS' Have also got to another point where superblock was incorrect. I can use terminal, but am not a linux guru... Have looked at other posts under luks, but can not find a solution.

View 6 Replies View Related

Fedora X86/64bit :: Error Before Booting \ Error Message:IOMMU: Mapping Reserved Region Failed?

Feb 20, 2010

I'm a recently proud owner of a new Aspire AS3810T with Fedora 12 installed, when it boots up before entering the boot screen when it loads I see this error message:IOMMU: Mapping reserved region failedHow can i fix this error? It's quite frustrating

View 2 Replies View Related

Ubuntu :: Mount USB Stick And Getting A Superblock Error "only "ROOT" Can Access Command"

Jul 11, 2010

Trying to mount my USB stick and getting a superblock error.. Tried a command in the terminal but it said only "ROOT" can access command...How do I get to "ROOT"...??? See attachment.

View 9 Replies View Related

Ubuntu Installation :: The Attempt To Mount A File System With Type Ext4 In SCSI2 (0,0,0), Partition #1 (sda) At / Failed

Oct 10, 2010

I grabbed the new lubuntu 10.10 from [URL] but it turns out I'm having a problem installing it on my netbook (Asus Eee PC 1015PED). While installing, this error pops up:

Quote:

The attempt to mount a file system with type ext4 in SCSI2 (0,0,0), partition #1 (sda) at / failed.You may resume partitioning from the partitioning menu.I'm installing via USB and have selected the option to erase everything and use the full HDD.

Edit: I had Xubuntu installed before.

View 2 Replies View Related

OpenSUSE Hardware :: I/o Error Ext3 Journal

Apr 10, 2010

I have a 500Gb external disk (esata) used a part of a backup cycle. I tried to mount it for the next backup cycle and an i/o error was detected in the ext3 journal. I fixed the bad block but that lost the data in the block and ran fsck.ext3. This resulted in a damaged file system message and a scan of the disk and fsck finished ok. The disk mounts rw. I am not really sure if I should reformat this disk. I have copied the backups off the disk and in any case there are later backups. Reformatting is not a problem but takes time and I would prefer not to do it if it is not required but I want a clean file system

openSUSE 11.1 X86-64

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved