Fedora :: When ABRT Has A Bug / Does It Turn Itself In?

Dec 7, 2010

So last night suddenly my computer started running really slow. Like it would take a couple of minutes for a window to open. I tried to start System Monitor to see what was going on, but couldn't get it to launch. At first I thought something had grabbed the CPU, but eventually I discovered that something was writing a massive amount to the hard disk. The intensive disk activity continued for about 20 minutes as I watched nervously. Just as the disk activity suddenly stopped ABRT popped up a message that disappeared to fast to read fully, but it said something about a file that was too large.

This morning I discovered that about 9 GB of my hard disk had been used up. Using "find -size +1G" I found an 8.6 GB file in /var/spool/abrt /ccpp-1291706342-2244/ called "coredump."I don't know what a coredump is or how to look inside the file to see what might have caused its creation. But I do know that ABRT has not said a word about the incident.

View 3 Replies


ADVERTISEMENT

Fedora :: System Update Fails Error "librpmio.so.0 Is Needed By Package Abrt-1.0.3-1.fc12.i686 (updates) Librpm.so.0 Is Needed By Package Abrt-1.0.3-1.fc12.i686 (updates)"

Jan 10, 2010

when ever i try to install updates i get shown an error & the updates stop the error i get says "librpmio.so.0 is needed by package abrt-1.0.3-1.fc12.i686 (updates) librpm.so.0 is needed by package abrt-1.0.3-1.fc12.i686 (updates)"

View 12 Replies View Related

Fedora :: Getting A Python Bug Surfacing Through ABRT

Dec 21, 2009

Lately I have been getting a Python bug surfacing through my ABRT. The Python version is 2.6.2-2.fc12.

View 1 Replies View Related

Fedora :: ABRT Service Not Running?

Mar 10, 2010

Whenever I log into Fedora, an icon (a triangle with an exclamation mark) pops up in the main panel . When I move the mouse over it, the following is displayed. ABRT service not running. I restarted the service from the service configuration window but there was no difference. How do I configure it to run alway

View 5 Replies View Related

Fedora :: F12 - How To Clear ABRT Cache

Apr 12, 2010

I can't find how to clear ABRT cache (other than to forcibly 'rm -rf /var/cache/abrt/'). How does one clear out the pile (which has grown to 1.2 GB here)?

View 3 Replies View Related

Fedora :: F12 ABRT And Bugzilla Can't Login?

Sep 17, 2010

First of all, I was unsure whether this should go in General Support or in Installation. The problem is occurring on my first boot of a freshly installed F12 system, but the immediate problem seems to be more concerned with Automatic Bug Reporting Tool and/or Bugzilla plugin.

That more immediate problem is: when I run the tool to report a crash, it complains that the Bugzilla Plugin is not properly configured. So I look at Edit->Plugins->Bugzilla just as it suggests, and I see a bugzilla URL that looks right, and blank Login and Password.

However, since I just did the F12 installation, which presumably is designed for any user, not a developer or member of the F12 project, there is no reason to assume that I even HAVE a login. So this is the first question: what Login and Password are they expecting here? Is there a special Login for the ABRT?

View 1 Replies View Related

Fedora :: Abrt Daemon Failed To Start?

Jan 7, 2010

I have fedora 12 32 bits installed on a Macbook pro (intel core duo) I did "yum update" this morning, I have restarted the system and got the following message:Starting abrt daemon: abrtd: Failed to start: got sig 2 FAILEDI have browsed in the web but I cannot find useful information. Then I typed:$rpm -qa | grep abrt

abrt-libs-1.0.0-1.fc12.i686
abrt-libs-1.0.3-1.fc12.i686
abrt-addon-kerneloops-1.0.3-1.fc12.i686

[code]...

View 2 Replies View Related

Fedora :: Get The Abrt Flashing Light At The Top Of The Screen?

Jan 27, 2010

Every time I login I get the abrt flashing light at the top of the screen, but nothing comes up. When I try to run it manually from Applications->System Tools->Automatic Bug Reporting Tool I get a popup with:

Quote:

Error while loading the dumplist. org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus)Is anybody else seeing this? If so, any idea as to what's going on? How to fix it?

I could just dump abrt since it's hardly a necessity, but I'm inclined not to as I think it's a good idea which could potentially be of great benefit to us all.

View 13 Replies View Related

Fedora :: Getting A Red Icon Warning Msg For The ABRT System?

Jan 29, 2010

Since upgrading last week we keep getting a red icon warning msg for the ABRT system - it's not really something we want to have activated - is there any way to turn it off ?

View 3 Replies View Related

Fedora :: Mass Delete Abrt Records

Feb 15, 2010

I had a major foul-up a couple of days ago, and I now have thousands of bug reports in the abrt applet. I'm trying to delete them individually, but it's taking forever. Is there a way to mass delete these reports to clean things up? I looked at abrt-cli and it has a --delete command, but only does them one at a time, too.

View 2 Replies View Related

Fedora :: Any Way To Reduce Size Of ABRT Cache?

Sep 25, 2010

Is there a way to clean (reduce size of) the abrt cache (/var/cache/abrt)? Perhaps something similar to "yum clean all"?

View 1 Replies View Related

Fedora :: ABRT (and SMOLT) And Sensitive Data?

Jun 18, 2011

Question about the bug reporting system that I think is called ABRT Struggling with F15 and want to file a bug report, but the backtrace thingy says I should remove sensitive data first. Obviously a good idea, but the report is full of what to a non-programmer looks like gibberish - things like what I guess are hexadecimal numbers or memory addresses, none of which I understand. Can any of that incomprehensible stuff contain sensitive data, like encryption keys or anything someone would need to crack a machine? If I remove all of that then the bug report will be pretty sparse.

(Same question applies to SMOLT - machine profie report - as well) Or is "sensitive" just about the human readable data in the reports?

View 3 Replies View Related

Fedora :: Librpmio.so.0 By Package Abrt-1.0.8-2.fc12.i686 Librpm.so.0

Mar 21, 2010

I installed Fedora 12 onto my PC today and I've tried installing a set of updates and get the following

A package could not be found that allows the action to complete.

librpmio.so.0 is needed by package abrt-1.0.8-2.fc12.i686
librpm.so.0 is needed by package abrt-1.0.8-2.fc12.i686 : librpmio.so.0 is needed by package abrt-1.0.8-2.fc12.i686
librpm.so.0 is needed by package abrt-1.0.8-2.fc12.i686

It isn't in Yum, where do I find it?

View 1 Replies View Related

Fedora Installation :: F13 - LiveCD Won't Boot. Hangs After Abrt Daemon

Jun 10, 2010

If I turn off the quiet mode in the boot options, it does throw up some errors (e.g. SQASHFS), and then stops after "starting abrt daemon".

On an AMD Athelon. It worked fine of F9, but started playing up, so I'm looking at upgrading.

View 4 Replies View Related

Fedora :: Synaptics Repair - Error Occurred While Processing Abrt (CollectFileProvides)

May 18, 2010

when I open synaptics I get this message:

E: Error occured while processing abrt (CollectFileProvides)
E: Problem with MergeFileProvides /var/lib/apt/lists/download.fedoraproject.org_pub_fedora_linux_update s_12_x86%5f64_repodata_repomd.xml
E: The package lists or status file could not be parsed or opened.

View 14 Replies View Related

Fedora :: Getting A Red Symbol On Taskbar With The Message "crash Detected In Abrt-gui?

Feb 2, 2011

frequently getting a red symbol on my taskbar with the message "crash detected in abrt-gui ...".What program is producing this? There is no indication of what action I'm supposed to take, so the message is not useful. It also seems to violate a basic principle that any program producing an error message should announce its own name.

View 3 Replies View Related

Fedora :: ABRT Not Connecting To Bugzilla Nor The Remote Servers To Analyse Core Dumps

Jun 14, 2011

Has anyone noticed ABRT not being able to connect to Bugzilla or the remote Core Dump analysis server? Since my upgrade during the beta phase of F15 I have been unable to file bug reports from ABRT's traces, nor has it offered me the option to file bugs to bugzilla. What it does, however, is offer me to analyse the Core Dump and backtrace of the crash using either the remote server or locally with GDB. Needless to say I'm clueless in GDB, and it requires a LOT of debug symbols found in the corresponding debug packages. But trying to use the remote analysis server always results in a message of the server being busy and to try again later. IIRC the last time I was able to file a bug through ABRT was in 13, has anyone been able to do so in 15?

View 14 Replies View Related

Fedora Installation :: Yum Dependency Error: Package: Abrt-1.0.7-1.fc12.i686 (updates-testing)

Feb 20, 2010

i tried running (yum update, also yum install vlc) and i get these error

Code:

Error: Package: abrt-1.0.7-1.fc12.i686 (updates-testing)
Requires: librpm.so.0
Removing: rpm-libs-4.7.1-6.fc12.i686 (@anaconda-InstallationRepo-200911081854.i386)

[code]....

View 14 Replies View Related

Fedora Security :: SELinux Is Preventing /usr/libexec/abrt-hook-ccpp From Using The Sys_ptrace Capability?

Jul 15, 2011

This is the "alert" I've received from SElinux Alert Browser after closing "rythmbox" application that opened my CreativeZen mediaplayer:

Code:
SELinux is preventing /usr/libexec/abrt-hook-ccpp from using the sys_ptrace capability
in dmesg it has:

[code]....

View 3 Replies View Related

General :: HPLIP - When Turn Off The PC And Turn It On Again The Printer Does NOT Work

Nov 4, 2009

I have Ubuntu 9.04, and a HP laserjet 1018 printer.

I install the printer using:

And when it ask me about plugin I give the path to it. (the 3.9.2 version of the plugin, because Ubuntu 9.04 has the 3.9.2 version of hplip)

well I install the printer, everything works perfectly.....but, when I turn off the PC, and turn it on again, the printer does NOT work!, I send work for being printed but mothing happens , Ubuntu tells me that the job was printed but ... no case, my printer does not print it.

I have to install it again since cero. what can I don to stop install it every time I turn off the computer ?

View 1 Replies View Related

General :: SATA Drives Or Chipset Throwing DRDY Error And ICRC ABRT?

Mar 18, 2010

I have an SD-VIA-1A2S PCI card with 2 sata ports (and one ATA-133 that isn't used). Two new Western Digital Caviar Green drives (WD10EARS 1TB) throw repeated errors in kern.log (removed date/time/host info for brevity):

[ 7.376475] ata2.00: exception Emask 0x12 SAct 0x0 SErr 0x1000500 action 0x6
[ 7.376480] ata2.00: BMDMA stat 0x5
[ 7.376483] ata2: SError: { UnrecovData Proto TrStaTrns }[code]....

I'm using Ubuntu 9.04 - 2.6.28-18-generic, though I have tried live cds of Ubuntu 9.10, Fedora 12 and OpenSUSE 11.2 - all running various 2.6.31 kernels - and all received the same error.Based on testing these drives and this card in two other machines and combos of connecting the drives directly to the motherboard or the add-in card, I'm relatively convinced that it's the VIA chipset that is the problem.Another computer that also has an onboard VIA SATA chipset (like the add-in card) produces the same errors when the drives are directly on that motherboard. I have been able to verify that the drives are perfectly good, and I tried everything I can think of in terms of swapping cables, psu isn't overloaded, etc.

The error happens on boot once or twice, after using fdisk on the drive once or twice, and constantly when attempting to sync a new mdadm raid 1 array created on the two drives.I'm completely open to buying a new PCI add-in card if someone can recommend one with 2 internal sata ports that works well in Debian/Ubuntu.

View 2 Replies View Related

Red Hat :: How To Turn SL Into Fedora 14

May 14, 2011

I installed Scientific Linux just for fun, but I find the repositories much too lacking. So, order to tackel that problem, I decided to try to install the fedora-release-14 package. Truns out, sl-release is blocking my success because sl-release obsoletes fedora-release. Then I tried the Rawhide one and it is still obsoleted. How do I add this Fedora Base repositories to Scientific Linux?

View 2 Replies View Related

Fedora :: Wireless Turn Off Itself?

Oct 7, 2009

I'm using fedora 11 and find that sometimes the wireless just turn off by itself. The wifi LED goes OFF and Network Device Control->wlan0 becomes inactive. It usually happens when I open for a long time ( 24 hr ?) I try turning off the wireless and turning on.

View 5 Replies View Related

Fedora :: Turn Off Touchpad?

Jul 20, 2010

I have a Dell Laptop running FC12. How can I turn off the touchpad?

View 14 Replies View Related

Red Hat / Fedora :: How To Turn On HALD

Nov 17, 2008

came to linux around 3 months ago. not up to speed by any means but want to stick with and get out of the windows trap. i used to plug in my external drives and they would be recognized but now they are not and I get HALD is not turned on please turn on

View 1 Replies View Related

Fedora :: Turn F10 Into A PS3 Media Server?

Jan 20, 2009

This is my humble guide on how to turn Fedora 10 into a PS3 Media Server. I would like to note that this guide is applicable to many different Linux distributions like Debian, Ubuntu, OpenSuse, etc. For now, it's located on my web blog in the link below. The direct content follows immediately.

View 3 Replies View Related

Fedora :: Running Chromium - How To Turn SE Off

Jan 10, 2010

Well this is simple. I just finished installing chromium on my computer. However SElinux is blocking it. I want to allot chromium to run, but I do not know how to turn SE off.

View 2 Replies View Related

Fedora :: How To Turn Off Software Updates

May 4, 2010

On Fedora 11 x86_64 the Software Update utility is annoying beyond words. I am trying to turn it off, but cannot do so. I have gone to System > Preferences > Software Updates and set it to Check for UpdatesNeverAutomatically InstallNothingCheck for Major Upgrades NeverYet it continues to pop up an icon in the Gnome panel when new updatesare available.If I use the utility to install updates it usually fails because of bugs causing it to fail on "cleaning up." I prefer to check for updates with Yumex when I have time. Although Yumex works reliably, after installing all updates the icon in the Gnome panel remains until after I reboot.I want that icon never to appear in my Gnome panel. However, while there are options in Preferences (which don't work), there is no option "remove from panel." How can I get rid of it permanently?

View 2 Replies View Related

Fedora Hardware :: Webcam Won't Turn Off?

Aug 27, 2010

Most freakily, it turned on by itself today. Usually I have to turn it on to not be able to to turn it off. Fedora 13Asus laptop with camera onboard. Using electrical tape for now

View 9 Replies View Related

Fedora :: How To Turn OFF Auto-login

Dec 5, 2010

I have this F-10 system with mythtv loaded. After power-on, it always comes up and auto-logs-in the mythtv account. I don't want that anymore. How/where do I go to DISABLE that "feature"?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved