Fedora Servers :: Idm-console Login Connection Reset

Jan 23, 2009

I am trying to get fedora-ds running on a machine. I can't log onto the console at all. If I use the command line below the log shows multiple instances on the following lines. fedora-idm-console -D 9 -x nologo


View 1 Replies


Networking :: Cvs - Login Aborted - Reading From Server - Connection Reset By Peer

May 26, 2010

When I try to connect to cvs server this is the error message I get.

I also tried cvs -d server:newuser@localhost:/cvs/CVSROOT login but getting the same result

My repository is in /cvs/CVSROOT

I also tried changing /etc/xinetd.d/cvs with different options, current it looks like this:

And my /etc/xinetd.conf is

cvspserver stream tcp nowait root /cvs cvs --allow-newuser=/cvs/CVSROOT pserver

# The next two items are intended to be a quick access place to temporarily enable or disable services.
# enabled =
# disabled =

View 5 Replies View Related

Ubuntu Servers :: SSH Error: Read From Socket Failed: Connection Reset By Peer?

Dec 8, 2010

figure out this error?

kradalby@hpcompaq6530b-laptop ~/.ssh $ ssh -vvv -p 110 kradalby@dfekt.no
OpenSSH_5.5p1 Debian-5+b1, OpenSSL 0.9.8o 01 Jun 2010


View 3 Replies View Related

Ubuntu Servers :: Blinking Cursor On Console Can't Login But Ssh Works And System Is Running?

May 23, 2011

I built a 11.04 server system in vmware workstation a few days ago, set it up for something and now I have a strange problem. It boots without problem. I can login via ssh, the services run and everything is OK from the outside. But on the console there's just a fast blinking cursor on the screen, no login or anything to that affect. Just blank and a blinking cursor.

View 7 Replies View Related

Fedora :: How To Reset Login Font To Reasonable Size

Jul 27, 2010

I am running Fedora 13 x86_64, and have been using the nouveau display driver.I have just installed the Nvidia driver using the easyLife application. Having already set up most things as I like, I only set easyLife to install the Truetype fonts and the Nvidia driver.the initial re-start was a bit nasty, the login screen fonts were huge and the desktop font also huge. I did manage to reset the desktop font size via System> Preferences> Appearance>Fonts>Details. The resolution was set somewhere in excess of 300, and I brought that back to 96 which has put the desktop back to normal.The login font size remains very large, and I have followed advice to set the DPI in the monitor section of xorg.conf 'Option "DPI" "96 x 96", but that hasn't had any effect.Does anyone know how to reset the login font to a reasonable size?

View 1 Replies View Related

Fedora :: Get The Console From Login Screen?

Jan 9, 2010

New clean install of Fedora 12 (my worst Linux experience so far, should have sticked with Fedora 9, it was old but it was stable, unlike this half-backed... whatever it is). Anyway, to the matter at hand (one of the many):How do I switch to the console from the graphical login screen? CTRL+ALT+Fn doesn't work, CTRL+ALT+Backspace doesn't kill X, it's a NIS machine with only root as local account

View 2 Replies View Related

Fedora Servers :: Reset SQL Root Password

Feb 4, 2010

I am trying to set up a webserver with apache, mysql and php on a old pentrium 4 computer. When I tried to setup my MySQL password, I created a password with punctuation in it. MySQL didn't want the password and gave some error about BASH. I tried changing my password again but now I constantly get the error that I am unable to login. I tried all the possibilities with the password I entered before but i just can't login to MySQL anymore. I found some help sites on how to reset your password by running MySQL in the safe mode but that didn't work for me. Can anyone help me resetting my password? Next time i'll use a pass without punctuation Every help is much appreciated! BTW, I also tried uninstalling MySQL with yum (yum remove mysql) and it uninstalled, but when I installed it again the password was still there

View 4 Replies View Related

Red Hat / Fedora :: Disable All User Console Login Except Root?

Jun 29, 2010

my linux system doesn't have X only console login possible. i would like to deny all user to login from any sources, local machine, remote console (putty, winscp) etc. except root.

i've found something about /etc/security/access.conf and i've put:

+ : root : ALL
- : ALL : ALL

but still users other then root are able to login (via putty for example).

View 2 Replies View Related

Red Hat / Fedora :: Cannot Login As Root In The Console (tty2-tty6)

Oct 19, 2010

I has Centos 5.5 with kernel 2.6.18-194.17.1.el5.

Linux centos 2.6.18-194.17.1.el5 #1 SMP Wed Sep 29 12:50:31 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux

My problem is this:

I can login as root in to Gnome and ssh but not in the console In fact I can login with anyuser in to Gnome and ssh but not in the console. By the console I'm referring to tty1-tty6. When the login screen is showed I write the user and password but then a message is quickly(I can�t see it) showed and erased and the login screen is showed again I looked the file /etc/security/access.conf but all the entries are marked as comments. I also looked the file /etc/securetty and this is the content:



I even can use "su" with root with no problem. The next entries are written in the /var/log/audit/audit.log file everytime I has this error:

type=USER_AUTH msg=audit(1284441198.687:5305): user pid=21795 uid=0 auid=4294967295 msg='PAM: authentication acct="root" : exe="/bin/login" (hostname=?, addr=?, terminal=tty2 res=success)'


View 2 Replies View Related

Fedora Servers :: Xorg.conf Reset, Now Want Boot To Desktop?

May 13, 2009

Edited 5/14/2009, No-Replies have read everything I can find trying to resolve problem. Continued at * so order may be followed.Fairly new to Fedora, I had reset my Monitor setting from the Graphical Interface on the Desktop, (got an out of range error) Was able to SSH in and reset Xorg to correct values, however now the server does not boot to the Graphical Desktop, just has a spinning blue circle on black background. The server has booted and I can get in with SSH, all functions of the server appear to be working correctly, i.e.web, mail, ftp, etc. However it never goes to the Graphical login page as before.*Fedora 8..the perfect server + ISPconfig. On boot when Fedora states press any key I can edit the following line:

ernel /boot/vmlinuz- ro root=UUID=67a30fd4-7022-4ebe-8f9d-07cd2aabd732 rhgb quiet
ernel /boot/vmlinuz- ro root=UUID=67a30fd4-7022-4ebe-8f9d-07cd2aabd732 3


View 1 Replies View Related

Fedora :: No Gnome Or Console Login After Upgrade FC10 - FC12

Jan 23, 2010

After the Upgrade of my Fedora Insatallation (FC 10 => 12) I have some problems with Gnome and the Login via console. The system actually boots fine and all kind of services like Postfix, IMAP, Samba, SSHD, Apache, etc. are avialable normally.

If I try however to work directly on the server I only see the completed Fedora progress icon and not as hoped for, the Login to Gnome. Also the attempt to change to a plain console with ALT-CTRL-F1 fails.

Since actually everything seems to work quite fine, I am somewhat helpless, according to should I look for, to get Gnome and the Console Login working again.

View 8 Replies View Related

General :: Fedora - Boot Direct To Application On Console With No Login?

Apr 19, 2010

I have a need to start an application on bootup on the linux console and I do not have a need for any type of login or security. I do not need any ALT-F1,F2,etc virtual consoles but I would like to allow SSH access via the network port for debugging, loading, etc.

The application is a SDL graphics program running with fbcon as the SDL_VIDEODRIVER if that matters. I'm currently using Fedora 10 and 12 but any distro that supports SDL using the fbcon framebuffer would be acceptable.

View 2 Replies View Related

Ubuntu Servers :: Periodic Ssh Connection And Login Timeout/failures

Jul 20, 2010

A few weeks ago, I upgraded one of our machines to the 64-bit server edition of 10.04. All went reasonably well (after some hoops to get it to properly recognize/mount the RAID + LVM partitions), but one of the things that confounded the installation process was login timeouts. From doing some research, I thought I'd gotten it solved by removing the checks for updated packages on login, but I either didn't get it done, or there's something else going on here.The issue is that the machine is headless and is actually a file & application server, but I do need to connect to it via ssh on a regular basis. However, the issue isn't related to SSH, as it also happens when I try and log in through the physical console too.

What happens is that every so often, login attempts will time out for a period of minutes, then they will suddenly start working again, instantly giving me my expected shell. Again, I suspect it is something with the way the motd junk is being generated, but having a server that prevents you from logging in is totally unacceptable. I've no idea how to go about debugging what happens because I don't see anything useful in any of the logs, and I don't have a way to trace the login process from outside. I'd love to hear what the problem actually is and how to prevent this from happening.

View 3 Replies View Related

Fedora Servers :: RDP As Console Session?

Aug 29, 2011

I have RDP working fine on my machine, however when I am signed in locally to the machine, I get the "console" session, which is fine, but when I want to RDP from another machine, I am put into a separate session, instead of "taking over" the console session.Is there a way to do this, similar to how RDP works on a windows machine?I have tried running the mstsc /console command, but I still get stuck into a non-console session.

View 1 Replies View Related

Fedora :: Unable To Reset Using Either The Reset Option In Gnome Shell Or The Command Using A Terminal?

Jun 3, 2011

I'm unable to reset using either the reset option in gnome shell or the command using a terminal. When I select it the shell exits and displays the graphic "exploding" and then it just sits there. Shutdown works fine; just no reset. Any ideas? I've installed from the DVD. I booted the live CD and it resets just fine so I know it's no my hardware

View 1 Replies View Related

Ubuntu Installation :: Starts In Console Tyy1 Login Then Goes To Normal Login

Dec 24, 2010

I don't what happened but yesterday I was working normally and then I shutdown the computer, today when I opened ubuntu it took me to tyy1 login screen, I entered my username and password then it took me to the normal login screen with the login drums sound and it wrote on my account (logged in) so I clicked it and I entered my password again and then I got to my ubuntu so what went wrong and how to fix it also I noticed that a new terminal in system tools occurred called Kernel (I didn't add it)

I'm using ubuntu 10.10 on Dell inspiron 1520 with Nvidia 8600GT and 3GB RAM

Important: this happened after update to generic-headers-24

View 1 Replies View Related

General :: Unable To Login To Server Through Console But Able To Login Via Network Using Putty?

Mar 13, 2009

I am not able to login to server from console attached to server, every time i enter username & password but it again asks for username & password. But when i try to login to server from remote machine, login happens properly.

View 4 Replies View Related

Ubuntu :: 10.04 Taking To The Login Console And Not Graphical Login?

May 1, 2010

I just installed 10.04, and its taking me to the console login, rather than the graphical login. When I tried the live cd, the graphical environment was good. But after installation, I dont get the graphical login , so that I can get into the desktop.

I have a ATI Mobility Radeon X1400 card on ThinkPad T60. Everything was working on 8.10, and I decided to install 10.04 and now it doesnt work.

View 3 Replies View Related

Fedora :: "connection To The Server Was Reset" Erupts

Aug 4, 2010

i got this problem every time i open the particular web page after i have opened some pages in my server. when i start to log in again in the same site, the problem pops up although this was not so when i first logged in. i was advised by the personnel in the web host to clear the cache in my browser which i did, then, i was able to log in again. however, when i reached the particular page again, the problem on "connection to the server was reset" erupts. i found in a suggestion in the internet to add this code in the php.ini which i also did post_max_size = 48M file_uploads = On upload_max_filesize = 192M

View 2 Replies View Related

Red Hat :: Unable To Login From Console F1 To F6. But Able To Login Into GUI In F7?

Apr 21, 2010

I am using rhel 5.3. I am using windows 2003 server 32-bit (the processor is 64 bit. AMD athlon x2). I have installed vmware and installed rhel5.3 64 bit on top of it. Now i am able to login as root from GUI mode (f7 console), but unable to login in text console from f1 to f6. I checked the /etc/securetty. But there was nothing unusual there. I think udev is causing this problem, since google said so. I cant find where the udev.rules file is located that google searches are taking about. How do i enable root login in f1-6 console.

View 4 Replies View Related

Ubuntu :: SSH Connection Reset By Client Error

Jan 30, 2011

I'm having problem running open SSH. I have installed SSH, on my system, but when I run:ssh localhost.I get the error :Read from socket failed:Connection reset by peer.I get that same error when trying to connect from a different local computer.When I attempted to restart the service by typing: sudo /etc/init.d/ssh restart.I proceeded to generate a new set of keys by running, ssh-keygen -b 1024.But I get the same errors after doing so.

View 1 Replies View Related

Networking :: Ubuntu - Reset Router To Get Net Connection ?

Sep 11, 2009

I'm still kind of a linux newb, so I might just be missing a little bit of knowledge here, but I've been having some real problems getting my machine to connect to my wireless network under Ubuntu 9.04.

Here are my basic specs:

Intel Pentium™ 4 CPU @2.66 GHz

1.5 GB RAM

3 HDDs: 1 40GB Maxtor internal, 1 320GB WD internal, 1 160GB Maxtor USB external.

OSes: Windows XP Home Edition (on Maxtor internal drive) Ubuntu 9.04 (on WD internal drive)

I don't think my video card would make any difference, so I won't list it on here...

Anyway, what happens is I try to connect (I select the network SSID from the pull-down list in the NetworkManager panel menu), and it seems to connect okay to the router, but I can't get out to the net. I can pull up a terminal and ping the router's address, but I get a "Destination Host Unreachable" message. It's as if, to the computer, the router isn't even there on that level, but it can still somehow connect to it.

Now, here's the strange part. If I reset the router from another (Windows) computer on the network (specifically, the one with a wired connection to it), then I can connect just fine and I can get out to the internet.

Even if you don't know specifically, but have some good ideas as to what might work, that's fine too. I hate having to do this every day, as it affects everyone's internet connection. Granted, it's not like I'm in a strict business situation with tons of machines and multiple access points, but there are 3 of us in the house and we all share internet access from the same router (as I'm sure most people do), and I feel kind of guilty having to interrupt everyone's connection, if even only for about 30 seconds just so I can get a net connection under Linux.

Windows connects to the router/internet just fine, btw. No problems there. I'm also using a NetGear WN111 USB wireless adapter, with the Windows drivers under ndiswrapper.

View 14 Replies View Related

Debian :: Recovery Or Reset Of Login And Password?

Jan 27, 2011

I have inherited a Compaq Armada 1592DMT that has Debian GNU/Linux (tiny) on its hard drive. After bootup there is a dialog box asking for login & password. Two things I have no way of answering. So how do I recover them? I do not have the faintest idea how Debian Linux works, nor how to Bash Grubs, I'm just an old Windows button pusher.

View 3 Replies View Related

Ubuntu :: Reset Boot And Login Screen?

Jul 9, 2011

i installed macbuntu a few months ago which changed the bootup screen and also the login screen. i have tried uninstalling macbuntu but i still have the macbuntu boot screen and login screen. i wish to reset these to the default screens but cant find out how.

View 1 Replies View Related

Ubuntu :: Firefox The Connection Was Reset While The Page Was Loading

Mar 5, 2010

Why do I keep getting this error when I try to search something on google. It happens when my query has around five or more words. If a search for just one or two words I don't get the error. I know it's not google because it happens with bing, msn, and yahoo too. The connection was reset The connection to the server was reset while the page was loading.

* The site could be temporarily unavailable or too busy. Try again in a few moments.
* If you are unable to load any pages, check your computer's network connection.
* If your computer or network is protected by a firewall or proxy, make surethat Firefox is permitted to access the Web.

View 1 Replies View Related

Ubuntu :: Pipe Error 3 - Connection Reset By Peer

Jul 6, 2010

My system just crashed.
kduffy101@kduffy101-desktop:~$ firefox
WARNING: pipe error (3): Connection reset by peer: file ./src/chrome/common/ipc_channel_posix.cc, line 404
Segmentation fault

View 4 Replies View Related

Ubuntu Networking :: Rdesktop Connection Reset By Peer

Jul 15, 2010

I've happily been using rdesktop to access my MS Vista desktop from Ubuntu (Hardy) for a few months until a couple of days ago when it stopped working. Now if I try connecting I get the following:


I don't believe anything's changed on the client (Ubuntu) side. The Vista box is occasionally connected to a corporate intranet via VPN and it was after such a session that rdesktop stopped working, so perhaps a Windows group policy was modified during the session. I've checked the basics - can ping from Ubuntu, can access port 3389. Have deleted ~/.rdesktop and ~/.tsclient.

Digging around the Vista client I noticed in Control Panel > System Properties > Remote that in the Remote Desktop sub-panel the Allow connections only from computers running Remote Desktop with Network Level Authentication setting is enabled and that the other two are greyed out. Now, I don't know whether this setting has been changed but I suspect that it might be the problem.

Unfortunately, I don't know enough about Windows to know how or even whether I can change this setting to Allow connections from computers running any version of Remote Desktop (less secure) I've poked around the group policy editor (gpedit.msc) but no joy.

View 9 Replies View Related

General :: The Connection To The Server Was Reset While The Page Was Loading

Aug 3, 2010

i'm using fedora 13 OS and installed web invoice application in my server. whenever i open the site, the problem on "connection to the server was reset..." is persistent. i was advised to clear the cache which i did. it work for a while but with just a few page loaded the same problem occur and i need to clear the cache. again i found a suggestion in the internet to add post_max_size = 48M file_uploads = On upload_max_filesize = 192M to the php5.ini. i also did this in my server, but the same problem occurs.

View 6 Replies View Related

Server :: Sendmail: Stat=Deferred: Connection Reset By []

Mar 17, 2010

I see in /var/log/maillog this error and I do this checks:


View 4 Replies View Related

Ubuntu :: Forgot Password To Login - How To Recover / Reset

Feb 19, 2010

I opened my note book. I have installed XP, Ubuntu. When I boot, I select ubuntu os. But I forgot my Password. How to recovery or reset my password?

View 4 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved