Fedora Servers :: Sendmail Server Configuration?

Mar 26, 2009

i have two Pc in my home , in my first pc i installed Fedora 8 and it has a ip adderss 192.168.10.1 and DNS Name client.redhat.com And in my second system i installed Rehat Enterprise Linux 5 it has a ip address 192.168.10.2 and DNS name server.redhat.com , and this is also my DNS server(192.168.10.2), and i also want to configure sendmail server on my second system and also tell me what is necessary entry should i make into my DNS forward lookup file for running sendmail server, i read lots of post

View 12 Replies


ADVERTISEMENT

Fedora Servers :: Sendmail Server Configuration ?

Nov 14, 2010

I am having problem with my Sendmail Server configuration. I had configured my send mail macros and make it. but i m having problem with "dnl"..i dont know what to put in this line.my ISP's name or localhost..? I am trying to create sendmail server with my dynamic IP address. i Just want basic configuration to use sendmail.

View 2 Replies View Related

Server :: Sendmail M4 Configuration Base Directory /usr/share/sendmail-cf Was Not Found

Nov 1, 2010

I am using webmin for my daily tasks. I have fedora 13, whenever I click on ''Sendmail M4 Configuration'' or Outgoing Addresses (generics)'' I get the following error message

Quote:

The Sendmail M4 configuration base directory /usr/share/sendmail-cf was not found on your system, or is not the correct directory. Maybe it has not been installed (common for packaged installs of Sendmail), or the module config is incorrect. I read documentation at sendmail.org, it seems that structure of directories for send mail has been changed in version sendmail-8.1.4 shipped with FC13. In webmin config module we have

Quote:

Sendmail M4 base directory = /usr/share/sendmail-cf

which is not there. I did a locate / sendmail-cf on the command line, it finds nothing

View 17 Replies View Related

Fedora Servers :: Turn Public Server Into A Sendmail Server?

Feb 22, 2009

I'm new to send mail. I have a server with a public address and domain name. But I only want to implement a small sendmail network on our 20-user LAN. Can I turn my public server into a sendmail server? Are there any simple step-by-step instructions for this?

View 1 Replies View Related

CentOS 5 Server :: Procmail + Sendmail Configuration On 5.2?

Aug 5, 2009

I have been trying to get procmail working on CentOS 5.2. I don't need anything fancy, just an auto reply for a "noreply@" account. Looking at the sendmail configuration, it appears procmail is the MDA. I have looked at many different tutorials and how-tos, but most are old, and/or the locations/paths and setups are markedly different from the defaults on my system. Can anyone recommend a good CentOS-based tutorial on Procmail w/ recipes? (I have an RHEL book and it's no help either.) Thank you for your time and consideration.

View 1 Replies View Related

Server :: Install Package Sendmail-cf To Update Configuration?

Jul 7, 2010

I seem to have a send mail problem .the server is RHes3 i edited the etc/mail/mail.mc

then did
[root@Mixer mail]# make -C /etc/mail
make: Entering directory `/etc/mail'
WARNING: 'sendmail.mc' is modified. Please install package sendmail-cf to update your configuration.
WARNING: 'submit.mc' is modified. Please install package sendmail-cf to update your configuration.
make: Leaving directory `/etc/mail'

[Code]...

View 1 Replies View Related

Fedora :: Sendmail Configuration For Sending Through ISP

Mar 12, 2011

I'm currently running a server at home with F13. Now I've set up my sendmail config to relay through another server because my ISP blocks outgoing email. Now recently I've noticed that they have stopped this server from relaying emails so i need to sort out another way to send out.My current sendmail config has this added which was the relay server i was using.

# "Smart" relay host (may be null)DSrelay.02broadband.co.uk

Now i either want to set up the server to email through my main ISP using a username / password or go through my main email provider Gmail.Any ideas on how to set up either on Fedora? I've seen guides for setting up gmail but never anything related to Fedora and I'm a bit stuck

View 4 Replies View Related

Server :: Verify Configuration For Services (httpd, Sendmail ,ldap ,DHCP, DNS, SQUID)?

Aug 22, 2009

How can I verify the following service configuration files/setup are ok with?(in RedHat)
httpd
sendmail
ldap
DHCP
DNS
SQUID

For example, I can use "testparm" to verify the my samba configuration . I want a similar kind of testing option for the above mentioned options.

View 5 Replies View Related

Fedora Servers :: Can't Edit HTTP Server Configuration In Fedora 13

Aug 12, 2010

I am trying to edit my http configuration (menu System -> Administration -> Server Settings -> HTTP) and it seems to be impossible. My Server Name comes up empty and I want to change the default Webmaster email address root@localhost to something else, but I can't change anything. I enter mu new server name and e-mail address, but when I click on the OK button I get a popup box which asks me if I want to save and exit. I click on the Yes button, and the box disappears. HTTP Server configuration does not exit and my changes are not saved.

View 3 Replies View Related

Fedora Servers :: FC10 DNS Server Configuration For A Local Network?

Jun 28, 2009

I have a lab of 10 computers with ips from 192.168.1.120 to 192.168.1.130 the server's Ip is 192.168.1.116When I am on client computer I type the server's Ip address on the browser and it works. All i want is that instead of entering my servers Ip I could just enter an address like: example.lan

View 3 Replies View Related

Fedora Servers :: Sendmail Broke (tcpwrappers) / What To Do?

Aug 28, 2009

I updated sendmail during a routine set of updates. I found it replaced my old sendmail with sendmail+tcpwrappers. I had to create an entry in hosts.allow as my hosts.deny was set to deny all. Never had to do this before, but I had not updated sendmail in a while. Just a heads up in case anyone else is about to perform updates.

View 1 Replies View Related

Fedora Servers :: Apache - PHP - Sendmail - TrustedUser ?

Jan 13, 2010

I'm running a fresh F12 server configuration install from DVD, and I'm having some issues with getting sendmail to actually function when called from a php script..

I'm using a mail() function in php run by apache. The httpd error log reports.

Httpd Error_Log

Code:

Code:

View 5 Replies View Related

Fedora Servers :: Sendmail / Genericstable / Virtual Domains?

Feb 18, 2009

WTF am I doing wrong with sendmail? I am trying to reverse alias a user as follows:

USER1 USER@MYDOMAIN.COM
USER1@hshlnb.hsh.com USER@MYDOMAIN.COM

That is how I have the entry in the genericstableWhen he sends mail, it comes from USER1@MYDOMAIN.COM, so I have the domain rewrite correct. The forward mapping in virtusertable works fine as well - he gets all mail redirected to the user1 account as specified.My sendmail.mc file has this:

divert(-1)dnl
include(`/usr/share/sendmail-cf/m4/cf.m4')dnl
VERSIONID(`setup for linux')dnl

[code]....

View 1 Replies View Related

Fedora Servers :: Sendmail Delivery To Local Boxes

Jun 1, 2009

I have fedora running as our email server at work using sendmail. It used to have spamassassin and MailScanner installed, but one of those died over the weekend and killed the mail server. We do not need either of these as we are using a web based spam filter now (postini), so I tried removing these. I have discovered that the mail is in the mqueue waiting for delivery to the users mailboxes. I have tried using "sendmail -q -v":

Code:
Running /var/spool/mqueue/n51Jx6Gg023820 (sequence 1 of 1174)
<abaughman@grandproductsinc.com>... Connecting to local...
<abaughman@grandproductsinc.com>... Deferred: local mailer (/usr/bin/procmail) exited with EX_TEMPFAIL

Running /var/spool/mqueue/n51JsuRe023619 (sequence 2 of 1174)
<ksullivan@grandproductsinc.com>... Connecting to local...
<ksullivan@grandproductsinc.com>... Deferred: local mailer (/usr/bin/procmail) exited with EX_TEMPFAIL .....

I do not have a procmail config file: /etc/procmailrc. I am not sure why, or what it should be, perhaps that is the problem. I guess I don't exactly know how this server runs all that well. I was able to get it up and running but never understood it enough to now find what is not working correctly.

View 1 Replies View Related

Fedora Servers :: Configure Sendmail To Send / Receive Through IP?

Sep 23, 2009

Regarding few things I am facing problem :
1. How to send one copy of that outgoing mail generated from the source. It should cc to another mail id in server's backend while mail sending.
2. I don't have any domain - internally or externally. Only have static ip, accessible from outside. Can I configure sendmail to send-receive through that ip.
3. How to transfer all mails and addressbook from exchange server to linux sendmail server.

View 1 Replies View Related

Fedora Servers :: Catching The Spam At The Sendmail Level

Oct 16, 2009

I'm running FC10, with the sendmail that was part of it in Feb 09. Anyway, Up till now I've been using the user client to do spam filtering, But I'd like to start catching the spam at the sendmail level. What are my options today? I tried searching the forums and found a bunch of threads from 2001-2006, but I figured many of the ideas are now longer vaild.

View 2 Replies View Related

Fedora Servers :: Sendmail And Home Network Woes?

Feb 22, 2011

I have a rather interesting issue. I have set up a home network and a fedora 14 box as a server. I am running the version of Sendmail that came with fedora 14. I wrote a PHP script that changes http access passwords(to give authorized access to the outside by multiple users) once a week and emails the users their new passwords. It also finds out my WAN IP (because it is dynamic, and I am using a Linksys router with NAT), and E-Mails users when this has changed along with the new access password. I have Sendmail set up so that it should log on to my websites mail server (smtp.example.net) and send the email through it.

The problem I am having is that I have set up my home server with an internal domain like exampledomain.home, but the wan IP reverse lookup returns xx.xxx.xxx.xxx.static.xxx.xx.charter.com, so that when my sendmail server connects to my smtp server for my website it gives "EHLO server.exampledomain.home" then my smtp server rejects it because the connecting IP (WAN IP) resolves toxxx.xxx.xxx.xxx.static.opls.la.charter.com gives a host not found error. Or it gives the error because server.exampledomain.home is obviously not a valid host name on the internet. I was hoping someone out there had some insight on how I could get around this without editing or adding any DNS entries to my websites domain. I would also like to avoid getting a static IP for my house as it is more expensive. I thought about making a dynamic DNS entry with dyndns.com and then making Sendmail use that host name. I dont know how to trick sendmail like that though.Here is a copy of my sendmail.mc (scrubbed of course).

divert(-1)dnl
dnl #
dnl # This is the sendmail macro config file for m4. If you make changes to

[code].....

View 4 Replies View Related

Fedora Servers :: F15 Sendmail Service Not Starting On Boot-up?

May 29, 2011

Just upgraded to F15 and I cannot seem to get the sendmail service starting at boot time.It starts and works just fine by hand after boot, so there's nothing wrong with the sendmail
configuration itself."runlevel" shows a current run level of 5 and "chkconfig" shows sendmail on for run level 5.All the other mail service (mailman, clamd, etc.) start fine.Doing "service sendmail start" after boot gets everything up and running just fine, but itsure would be nice to have it run at boot like it used to

View 1 Replies View Related

Fedora Servers :: Fedora 10 - Sendmail / Dovecot Relay

Jun 7, 2009

I am trying to setup sendmail on a fc10 box with dovecot running imap. I have everything configured and running on the server. For example, when I run "echo 'test' | mail -s test user@mydomain.com" or even to someuser@gmail.com, the mail goes through just fine. I can then reply from both of those accounts back to the server, no problem.

Relaying denied Cannot send mail. The SMTP server does not recognize any of the authentication methods supported by Entourage. Try changing the SMTP authentication options in Account settings or contact your network administrator.

View 10 Replies View Related

Fedora Servers :: Migrate Local Users And Sendmail Mailboxes?

Apr 21, 2010

I found 2 previous posts, one from 2005 and one from 2006. The 2005 post was not very helpful and the 2006 threads are not exactly what I was expecting. So I wanted to ask the question to be sure. I have already stood up the new fedora 12 server. The old server is also fedora 12. I need to migrate local users and sendmail mailboxes. In the past couple of years the environment was small enough to create a copy of the users and then have the users mail themselves, but I want to start migrating users/mailboxes properly.

On a unix level I am a jr admin, but I have extensive senior level experience as a windows engineer and network engineer. I do feel comfortable with using the unix command line, but usually operate the unix systems thru webmin because I am not familular with more complex commands. Ideally a software solution to migrate users and/or mailboxes from one server to another is what I am looking for, but in leiu of a software solution I still need to migrate user accounts and their mailboxes. LDAP is not in place, but if the process becomes easier with LDAP I am willing to do what is needed to set up LDAP. (I have no previous experience setting up LDAP)

I do not want to change my mail server from sendmail to different software. At least right now. Both systems are up and running. They can connect to each other via public ipv4 address' only. The new server has already been installed and configured with all the software to match the old server. How do I migrate users and sendmail mailboxes from one fedora 12 server to another fedora 12 server?

View 3 Replies View Related

Server :: Can't Login To Sendmail Server Using Cyrus-imap On Fedora Core

Apr 4, 2011

I recently setup an email server on Fedora Core (14). Sendmail is running and I am trying to authenticate from a client pc using imaps. I installed Cyrus-imap and it is running and listening on 993. When I try to login, it doesn't accept authentication even though I verified the user's password is correct. (tested with ssh)Is there something I have to do with Cyrus or on the server to allow connections to email? I have not used Cyrus before. I am attempting to access my mail folders via Sendmail and did not make mailboxes in Cyrus. I did allow imaps through the firewall.

View 1 Replies View Related

Server :: Sendmail Server - Status - Sent - But Unable To Retrieve On User Inbox - FEDORA CORE 9

Jan 20, 2010

We're running a sendmail server on a fedora core 9 which we've configured recently. The problem is, the server is working fine but there are some e-mails that enter our server but doesn't get forwarded to the user.

Quote:

Quote:

Here it says "stat=Sent" but nothing from the above mail address has been received on the client's inbox. We've experienced this with Microsoft Outlook, Outlook Express and Thunderbird alike so far with Two(2) of our user accounts.

View 1 Replies View Related

Server :: Sendmail Not Reading Default Sendmail.cf ?

Apr 1, 2010

I recently modified sendmail.cf to use a third party SMTP server to send emails. It works great. But when I run sendmail from the command line, I have to specify the -C flag and force feed it the location of my sendmail.cf, or else it doesn't work.

So in other words, the following works great:

However, if I don't specify the -C flag, sendmail doesn't consider what's in the sendmail.cf and barfs:

I don't run sendmail as a daemon. I'm only using it to send emails. I know my modifications of sendmail.cf are correct because it works perfectly when I use the -C flag. I searched my disk to see if I could find another sendmail.cf on the machine and only the one in /etc/mail came up.

Why sendmail is not reading my sendmail.cf?

I'm running Sendmail version 8.14.2 on Fedora Core 8.

View 1 Replies View Related

Fedora Servers :: Sendmail[31427]: Unable To Open Berkeley Db /etc/sasldb2: Unknown Error 13

Sep 7, 2010

I've been using cyrus and sendmail together for a very very long time now. Just recently I upgraded to fedora 13 and now my virtual users can not send email from the /etc/sasldb2 passwords. I get in the /var/log/messages sendmail[31427]: unable to open Berkeley db /etc/sasldb2: Unknown error: Its weird that they can still log in and get email from imapd.conf

sasl_pwcheck_method:auxprop saslauthd
sasl_auxprop_plugin: sasldb
sasl_mech_list: LOGIN PLAIN CRAM-MD5 DIGEST-MD5

[code].....

I even tried re-creating sasldb2 and sasldblistusers2 shows my two users 'one' that is also a local user account and the saslauthd authenticates when sending emails, but the virtual user 'two' can't send just only can log in to receive. /etc/sysconfig/saslauthd is set up as mech=pam. but I don't see how that would be relevant to this issue.

View 5 Replies View Related

Red Hat / Fedora :: Setting Up A Local Mail Server On 5 Using Sendmail?

Sep 22, 2009

i have fedora5 installed on my machine MACH1, which acts as a linux server for few machines. Its over network and we have a dedicated mail server too which is globally accessible. I wanted to set up a local mail server on MACH1, so that i shall be able to send/receive mails from all the users as well as to our other global mail server(on internet).

View 3 Replies View Related

Fedora Installation :: Setup An Email Server Using Sendmail And DOVECOT On F13?

Sep 11, 2010

I wish to setup an email server, using sendmail and DOVECOT on F13 With no modification of the DOVECOT config file ( fresh installation ), I can see that :

service dovecot restart
shows me :
service imap stop
service imap start

In the config file, I have :

protocols = imap pops imaps pop3s

and of course, I cannot connect as pop3

View 7 Replies View Related

Ubuntu Servers :: Where To Find SSH Server Configuration

Nov 28, 2010

Where to find SSH Server Configuration Howto for Dummies? To Ubuntu 10.04 LTS Server? Must work like FTP/SFTP and user accounts must be in MySQL. Just for File Transfer and user can open only his / her own ./ where is public_html in root..

View 4 Replies View Related

Server :: Setup The Servers In A RAID Configuration?

Apr 15, 2010

I am rebuilding two microsystems servers and I need some advice to make my dreams come true.I want to setup the servers in a RAID configuration and want to install a GUI Linux application to manage a file server, manage a subnet, and host a Moodle on my subnet.I am planning to use Asus eee netbooks running Linux as my client computers. I basically need to be able to get my kids on the web and be able to have them use some open source office suite tools. No major crunching. I'll have two Macs for that.

View 3 Replies View Related

General :: Sendmail Configuration Over A Cable Modem

Feb 19, 2010

I have a CentOS system running. I want to get mail off it to my yahoo account.

I did a test mailx command and it goes out of the queue but never gets to my yahoo mail.

I am using a cable modem.
I can go out to the Internet so I know I have a valid connection.
I am guessing I need to set something up so the cable company will relay my mail for me.

I know i can pull pop mail down and sen it using my account.

Do I need to configure something in the sendmail.cf file to do this?

I just went into my email and say this ...patial msg included...

(reason: 553 5.7.1 [BL21] Connections will not be accepted from 98.249.136.1 9, because the ip is in Spamhaus's list; see [url])

View 9 Replies View Related

Networking :: Sendmail Configuration Work With RANCID?

Nov 14, 2010

I'm new to Linux which just installed a new virtual CentOS server to try RANCID to pull router configuration and I succeed to pull out the configurations as I wish, but I failed to receive a notification email from the server.After a few tries, I realize that I need to configure sendmail to work with RANCID to send an email! And I also tried to configure sendmail files, but failed..I totally blank and don't how to configure sendmail, anyone here can guide me? What is the must to configure to make sendmail to work with RANCID? Do I need to configure my server as mail server?1. A server that I configured a sendmail is called mail server?2. What is my mail server's name and domain name? . lnx-svr01.site.net, lnx-svr01 is my mail server name and site.net is my domain name

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved