Does anyone else have this problem. Came just after recent update and is highly annoying. Plug usb device in and it is recognized on lsusb but not mounting and appearing in media folder. How do I solve this. Searched the forum but nothing useful
I know this problem was mentioned here before but because I could not find a straight forward solution anywhere I am reposting this here. So here goes.As of today, my Fedora 13 64-bit has ceased to auto-mount USB drives completely. I have made absolutely no changes to the system and I am completely baffled and frustrated by this sudden development. I desperately need this system to function properly as I use it for school and this really put a wrench in my works, especially since I have done nothing to cause this. I assume that one of the many recent updates that have been released must have done this, but I have absolutely no idea how to fix this. Why do Fedora developers release updates that cripple a perfectly functioning system is beyond me and crap like this really makes me consider switching back to Ubuntu.
I upgraded my testing/Wheezy Inspiron N5010 to 2.6.38-2-amd64 recently (along with a bunch of other updates, of course) and now my Samba network share is no longer automatically mounting, I have to open a root terminal and do a "mount /mountpoint"; my relevant /etc/fstab entry:
I've tried over options, as well, but it isn't automatically mounting. Any suggestions (including where to file a bug report)?
I tried mounting a new CD, but nothing happened. I tried again, with a CD I'd used before with the same results. I tried a DVD in the same drive and it mounted OK, so it's not hardware. (I haven't had time until now to report this.) The box is running F 14 and is fully updated. Below is the results from /var/log/messages saved from June 28:
Jul 28 14:07:21 khorlia kernel: [3792447.281593] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 28 14:07:21 khorlia kernel: [3792447.281604] sr 1:0:0:0: [sr0] Sense Key : Illegal
I would like to exec a script whenever a user mount a device. The device could be an internal device (for example a partition on a second hard disk) or a removable one (for example a usb hard disk). The script must have sudo capabilities even if the user is not included in the admin group. Is it possible?
The specific question: I would like to add acl option to a device whenever it is mounted. I tried fstab but it's changing the behaviour of nautilus see:
[URL]... so I would like to create a script with the command
Code: sudo mount -o remount,acl /media/data and auto execute it any time data is mounted.
I have a fresh installation of Fedora 11 and I am having a hard time figuring out how to automount my storage drives. Each time I login, I try to access my various storage drives and gnome makes me authenticate asroot before mounting it. FSTAB lists only logical volumes but not my storage drives. What can I do to make sure these automount when I login?
I boot several Redhat based distributions, Fedora 15, Fedora 14, CentOS, Scientific Linux, Redhat and occasionally something non-Redhat based like Ubuntu and Debian. Out of habit and preference I frequently set up partitions to be auto mounted at boot through fstab. Somewhere in time something went seriously wrong with the CentOS install. There are a ton of permission denied errors while booting CentOS (text style boot) mostly regarding shared libraries. The system will boot to the desktop and everything looks OK but some things don't work. I can't update the system because I have no network connection. I obviously can't get to the Internet or get e-mail. I can open a VT but can't log in as regular user or root.
Permission denied in both instances. I didn't make any drastic changes to the CentOS system, just minor tweaks. The culprit in my opinion is a combination of the fact that one of the other Linux systems did an SELinux relabel while booting and the CentOS partition was already mounted. Since the CentOS partition was mounted it too was relabeled. I can't prove this. If there's a way to prove it then I just don't have the skills or knowledge to do so. It's basically a theory based on what I know I've done with the several installed distributions. This is not a rant nor is it a request for help. Just a comment. An assumption, hopefully a correct assumption. The CentOS install was working flawlessly until something happened and I think that something was the SELinux relabel.
I stuck a flash drive into a usb port this morning, and the device notifier failed to show. I opened Dolphin, and I noticed that nothing that should be mounted was showing up in the left pane. I always have seen my Windows install, as well as another partition that has Slackware. I can navigate to /mnt/vista and its all there. I can also go to /mnt/Slackware and its all there. However, the flash drive does not show.I can manually mount the drive and all is well as root. I can't even tell you when this started. I am using Alien's 4.6 KDE packages with all the deps. I just opened mc and checked everything. HAL is disabled and has been for a long time. All did work after disabling HAL.Its not just the flash drive, it effects anything - music cds, blank media, nothing works automagically. Google hasn't
I have a 500 GB ext4 formatted HHD which i have to manualy mount when ubuntu starts. I have read much on the topic but am still unsure what i should add to fstabmy output when entering "sudo fdisk -l" is
I have one of those lovely Western Digital external hard drives and it seems to have an UDF "partition" on the hard drive itself. I cannot format it, remove it from the hard drive itself, or disabling the UDF seems to be a no go once its popped into a Linux distribution of any kind.
So my question is, is it possible to stop the UDF from even auto mounting at all?
my opensuse is not auto mounting USB drives anymore. It was working a few weeks ago! I have an external 500GB HDD and also an 16GB Kingston USB flash disk, both are not being auto mounted.If i do lsusb i get
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 006: ID 0930:6545 Toshiba Corp. Kingston DataTraveler 2.0 Stick (4GB) / PNY Attache 4GB Stick Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
I currently run a Windows XP virtual machine (using VirtualBox) so that I can use iTunes. This is fine, and I have set up a USB device filter which allows me to use my iPod, and update it via iTunes on the VM. However, this only works sometimes. I think the reason is that the VM sometimes can't get access to the iPod because it's mounted in Ubuntu - I think it may just be a race for who can mount it first - Ubuntu or the VM, when I plug it in. Is there a way I can prevent the iPod from automounting in Ubuntu so this problem (hopefully) won't arise?
This always used to mount automatically and has suddenly stopped. Same result if I use smbfs instead of cifs. I have worked around this by adding noauto and then mounting it in /etc/rc.local.
Anyone else had this and fixed it so that the share mounts at boot rather than login. I do have some cron tasks that require this to be mounted and assume they will fail unless I login immediately after a reboot.
Tested with diffrent parameters. And another problem also with samba shares, when I edit file from editor (eclipse) after save i got 'file changed dialog'. seems like file is written with some delay ? and timestamp dont agree (its my blind quess). On 9.04 no problems. Tested with 2 instances of Eclipse. One copied from 9.04 and second fresh install. Other editors raport the same problem. Its anoying as hell.
I've recently installed Arch on my main PC, and I decided to use Xfce4 desktop environment as appose to gnome that I use on my laptop. Firstly, I had to search round for an icon theme to get any of the icons working (they were all just papers with red crosses in them to start with), which I think is taking lightweight a bit too far :P, but just my opinion.Now i've got that sorted I turned to the problem of auto-mounting partitions. I'm having some trouble getting HAL to auto-mount my NTFS partitions which have my documents and music on. They are NTFS because i've got dual boot windows, and had windows before Archlinux so NTFS was the logical fs type to use. I think HAL is auto mounting dvd's etc. (can't be sure as I aren't in Arch at the minute)I can mount the NTFS partitions manually using:mount -t ntfs /dev/sda(number from 1 through 3) /mnt/sda(1 through 3)
However, I can only access this via root, so I carried out: mchmod scott.scott /mnt/sda(1-3)or something similar and that works fine, so I know they can be mounted successfully. I've tried auto-mounting them using fstab but can't seem to get this working, and I would rather not have fstab auto-mount them, I would rather let HAL sort all that out for me.I have checked that dbus, hal, consolekit and xf86-input-evdev are all installed (although im not sure what xf86-input-evdev does).Has anyone got any ideas why its not auto-mounting the NTFS partitions. My laptop mounts the NTFS windows partition fine using gnome.
i am using ubuntu 8.04 and i am facing a problem of mounting external pen drive, exernal harddisk or even other /dev/ partitions in my login mount is not working so i manually mount the partition by mount command .. but i dont know how i can resolve this problem ...
fdisk -l currently returns as Disk /dev/sda: 160.0 GB, 160000000000 bytes 255 heads, 63 sectors/track, 19452 cylinders
I would like a USB thumb drive to be automatically mounted whenever I insert the drive into my PC (previously I had been mounting it manually with the 'mount' command). I gave the USB drive a unique label with e2label. I added an entry for it in /etc/fstab. This works in the sense that if I run "mount -a", the drive will be mounted. However, it still isn't completely automatic. Am I missing something? What else do I need to do?
Used to be, when I connected my phone and turned on USB Storage, it would automount, and I'd get a popup window asking me what I wanted to do (open and view files, or import photos with gthumb). I would just choose open and view files, move photos, music, etc. back and forth...
I would see the device listed in pcmanfm or thunar. Now, nothing happens. I do not get the popup, nor see the device in any file manager, etc. When I do fdisk -l, I do not see the phone listed, but when I do lsusb, I do see it.
Code: Select allBus 008 Device 067: ID 0482:0734 Kyocera Corp. Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
It's a Kyocera Hydro Elite, an android device, set for USB Mass Storage upon connection. The phone knows when it's been connected and gives me the option to turn on the mass storage, which used to trigger the popup on the computer, but the computer no longer responds.
I have thunar-volman and mtp-tools installed.
I don't seem to have any relevant entry in /etc/fstab. Not sure if I did before upgrading to jessie from wheezy or not... I don't believe so...don't think an upgrade would wipe anything from there.
Why I'm not getting access to the phone now? Or how I can mount it without knowing it's location from fdisk? I do not use gnome, but rather plain openbox.
I'm using Maverick Meerkat, 10.10, 64bit. I'm a pretty basic user but am trying my best to learn.
My background: I have a laptop on which I installed Win7 Ulimate on one partition. After installing Win7 I then installed Ubuntu on a separate partition. GRUB2 found both Win7 and Ubuntu perfectly. I could choose to boot into either one and the ability for GRUB2 to "remember" which OS I booted into last worked properly. I then did a kernel update a couple days ago via Ubuntu's Update Manager. After that, GRUB2 could no longer see Win7. I added a custom boot entry in /etc/grub.d/ so that Win7 would show up in GRUB2.
However once Win7 did show up in GRUB2 I kept having a problem with the Windows bootloader being missing. I used the Win7 Recovery DVD to get into Windows and then installed EasyBCD for Win in which I was able to create a Win7 boot entry and get the Win7 bootloader back. I set EasyBCD to skip the bootmenu so my current configuration now is that on bootup I see GRUB2, which shows Maverick Meerkat & Win7. If I select Win7 then Win7 loads via EasyBCD and it works fine.
The problem though is that GRUB2 does not auto-detect Win7 AND it no longer remembers the last OS that I booted into. I would rather not use EasyBCD if I can help it and would like to just use GRUB2 for everything.
My question is this: How can I get GRUB2 back to controlling Ubuntu & Win7 properly without the need for anything else in between. I have asked in the Freenode Ubuntu channel but haven't received any help besides "sudo update-grub" which I have done and it hasn't helped.
I'm not sure how to do this. I checked the hard drive preferences and looked through the forums... I don't want to manually mount my hard drives(s) every time I boot up just to access my music and wallpapers.
I have upgraded to 11.04 today and I have hit a slight snag. In 10.10, I had it setup so that it would run a custom script when an audio CD was inserted into the DVD drive. The CD would mount regardless of whether the screen was locked or not. Since upgrading to 11.04, the CD will only mount when the screen is unlocked.Whilst I can appreciate the security benefits of this (if it is indeed intended and not a bug), is there a way to be able to enable discs to be mounted automatically, whether the screen is locked or not
I have an ecryptfs partition on a usb drive, system runs Debian squeezeWhat I'd like to have is that when I connect the drive it will be auto. mounted and I'lleither have to enter the passphrase or it will already be in the keyring (even better).It seems ecryptfs can auto-mount a directory but I want to auto-mount an entire encryptd partition. Is this possible?.Also, can I have another encrypted directory, say ~/Private, at the same time or can ecryptfs handle only one at a time?
When I installed slackare 13 it detected usb drives and cameras automaticallyow it doesn't. I am runnning a 13.0 system, not current, so I have only applied the updates in that branch (iirc including a new kernel).nowadays when i plug a device in it does not seem to be detected by HAL (i.e not in KDE).However the device is listed if you use the command "lsusb" and the computer obviously knows it has been plugged in as there is a relevant entry in dmesg.Sorry for the generallised nature of the post, but I don't really know anything about HAL or how it can have stopped working
Whenever I mount any of the ntfs volumes, instead of opening the volume, Rhythmbox starts automatically and scans volume for media files. It has nothing to do with media files as it starts even when there is no media file in the volume.