Have a dedicated Fedora 10 laptop so that I can learn everything I need to know. I am using an Acer Aspire 3000 with a fresh copy of Fedora 10 and KDE
The Aspire 3000 has a built in broadcom wireless card, with windows XP you activate the wireless using an LED button on the front of the laptop, but with Fedora I can't seem to do this.
I have found a couple of threads to fix this error on Ubuntu but nothing about fedora. I don't want to change OS as I have just about got this system running like clockwork. I have left the wireless until last as the normal LAN works fine.
The driver is installed when I installed Ubuntu 10.10 it asked me to install this. Is not a problem of driver I think. It is a Broadcom Corporation BCM4312
I found out the following: 1. I tried rfkill unblock all with negative results 2. rfkill list phy0: Wireless LAN, Soft blocked: no, Hard blocked: yes 3. look in the file system: NetworkingEnabled=true, WirelessEnabled=false, WWANEnabled=true
Is this really not supported by Ubuntu ?? username: melfrimarlyne e-mail: firstname.lastname@example.org
I recently installed ubuntu 10.10 on my aspire 3000 and everything seemed to work just fine... until I tried to activate desktop effects. tu put it simple, it just don't work. I checked and doubled-checked the lsmod | head to make sure that my drivers (sisfb / sis_drv.so) were installed and loaded. they were. I then made sure that my pc was opengl-supporting (Glxinfo | grep "direct rendering". The answer was positive. With that in mind, I tried many different ways to run compiz(compiz --replace, appearance-desktop effect, run app-compiz) but neither if these gave any results.
My landlord upstairs just got a new modem and WiFi by Clear.com and when trying to get the WiFi to work...it just wouldn't connect with my laptop. They have 2 computers upstairs, one laptop and one desktop that recognized the WiFi and don't have any trouble using it. Wondering if there is something I have accidently clicked or changed to make it not connect. It does not have an error message, it just does not connect completely.
after finally getting this machine tot run with ubuntu i am now on an ethernet connection because all of a sudden, my wireless says its disabled. When iwconfig is entered, it shows my wlan 0 but says power management : off. It is so frustrating because I feel like there should just be a button that says to switch it on haha. Please help, my wifi was working, and after a boot it is no longer.
This bug has been around for years now?!? Surely this can be fixed by now, would somebody please feel this very common issue. I've installed Ubuntu 11.04 on my Acer Aspire One 110AB netbook and everything seems to work fine except the wireless - I can connect via ethernet no problem.
While the wireless can scan for networks - it seems them but they seem to be rather weak signals and also no matter never connect UNLESS I turn off ALL WEP/WPA security clearly not an option.
I had UBR installed and working fine for a month or so, wireless and everything. Then I did a clean re-install while trying to add WinXP to half of my drive.Anyway, with the new install, my wireless chip (BCM4312 802.11b/g) isn't switching on at all. I've tried installing the Broadcom driver that appears when I run Hardware Drivers, but that doesn't help.With the old install, the wireless switch and indicator light on the front of the netbook worked, now nothing.
It's a Acer Aspire 4520 Laptop running Vista Ultimate. All Drivers are working fine except Wireless. No wireless adapter is shown in Device Manager. Acer website was no help at all, has the drivers but no adapters for download. This laptop shows that it has Acer signalUp, also shows 802.11b/g WLAN on the sticker. I've downloaded Athero AR??? wireless driver, did not do anything to help the problem, downloaded the broadcom one also and it did nothing. Works fine on the LAN cable but no wireless.
I can't get my wireless card to work. I downloaded a broadcom driver for it and i do believe its the right one, but its not helped. I'm running mint 8. The information on my internal wireless card i got using the terminal is:
lspci 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 760/M760 Host (rev 03) 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25) 00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] [Code]....
I've just worked out how to get the wireless card working with an Acer Aspire D260 wireless card to work. Enter terminal command; sudo apt-get install wifi-radar
Then reboot ubuntu 10.04 after it has installed, network manager should now detect wireless networks in range and allow connection, right click network manager icon and select "Enable Wireless" or "Disable wireless" as required to turn on or off. So many others have had problems getting the wifi to work with Acer Aspire D260 netbooks and ubuntu 10.04.
I recently installed Ubuntu 10.10 onto my Acer Aspire D260 netbook.I find it much easier to use than Windows 7.Everything has been working fine until I recently tried going on the internet via battery power instead of my A/C charger. My update manager is showing that I am up to date and Additional Drivers is showing that the Broadcom STA wireless driver is installed and in use.
Ok, so I upgraded my acer aspire one to the new Ubuntu 10, and at first everything was working fine, except the audio. Now, for some reason, my wireless and ethernet ports have died. I can't get online by either method. I can do ifconfig <device> up and it will show up if i do iwconfig or ifconfig, but the wireless isn't associated with the AP. Currently I'm trying to load some drivers for my atheros card, and we'll see how that works outReally I was wondering, how come the modules don't load at boot time, and how can I fix this? I've been a Linux user for quite sometime, however I've been more of end user
I have a new Acer Aspire One, model D250-1958. It uses the Atheros AR928X. I've tried Ubuntu Netbook Remix 9.10 and Ubuntu Netbook Edition 10.04, as well as the conventional Ubuntu. Everything works beautifully, except no wireless. The netbook picks up the signal, but when I provide the Key it fails to connect, and eventually prompts me for the key again.
I've tried to research this on my own, but haven't found a solution. In particular, the solution reported by narnie for his Acer Aspire One D250-1584, <HERE>, didn't work for me.
I'd really like to get this working. The netbook will be much less useful if it can't make use of our wireless router.
I haven't done Linux since before it had Wireless support, and have never had to tinker with network settings, so I am at a loss.My searching may be weak, but when I tried, I found nothing relevant except to determine some of the things usually asked for in threads of this nature.The symptom is very slow connection when using wireless, but it does fine when I hardwire it. Using Windows 7 on the same system it flows nicely.
in compliance with bonekracker's advice, i have reposted my SOS. i have the result of the outputs of the commands for ifconfig, iwconfig, and etc i have uploaded it in the file output.doc. i hope this would be helpful in debugging my problem.but before that, i do notice that if i click on the icon for the Network Manager, the Wireless networks is set to 'wireless disabled'. maybe if i can make it turn on, my wireless problem will be solved.. its just that i even if i move the switch for the wifi, it still wouldn't turn on.
I have just installed Meerkat on an Acer Aspire laptop, it can see various wireless networks but for some reason can't connect to them. However when I turn my HTC Desire into a hotspot it connects to that fine. Why can it connect to my phone yet not any routers?
I recently bought a new Acer Aspire and installed Lenny, I can get a wired network/internet connection however not a wireless connection. I use wicd. Bluetooth doesn't work either though I suspect that it might be the same issue.
Don't know if it helps however when I tpye iwconfig I get: ladb:/home/nigel# iwconfig lo no wireless extensions. eth0 no wireless extensions.
I've just installed Ubuntu 10.4 as a dual boot on my Acer Aspire 0ne 533. I have to keep the Windows partition for work, or I'd have just installed Ubuntu. I'm used to plugging in an ethernet cable for the first round of updates until I get the WiFi working, but it just isn't working for me this time. I have a horrid feeling that Windows has a way of hogging the Ethernet card.
I had a look in the forums, and could not find anything referring to this specifically, which is unusual because as far as I can tell the AA1 is a popular machine and lots of people dual boot it. Perhaps it is an easy fix that's been buried in the archives?
Maybe they made a change without changing the model number? I have an Acer aspire 5517 bought last Friday, and with Ubuntu 9.10 the wired network came up fine, I upgraded with latest fixes today, but it stil doesn't recognise the wireless interface at all, not "network connections" window, not "ifconfig -a".
I searched everything before posting this, and tried every solution, but so far no luck, i will post my info, and hope someone smarter then me can solve this? Wireless works fine in windows, but apears disabled in ubuntu lspci -nn
Code: 00:00.0 Host bridge : Advanced Micro Devices [AMD] RS880 Host Bridge [1022:9601] 00:02.0 PCI bridge : Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0) [1022:9603] 00:04.0 PCI bridge : Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) [1022:9604] 00:05.0 PCI bridge : Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) [1022:9605] 00:11.0 SATA controller : ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391]
the laptop has no bluetooth chip, so i am not sure where "acer-bluetooth" is coming from. Also i am quite familar with linux, so no need to hold my hand, i am just not sure what to do next in this situation. (if this makes solving this easier)
PS: There is no 'hardware switch' on the laptop, but there is a Fn+F3 key combination which does nothing. network-manager shows on startup 'Enable wireless' with no check next to it, checking it 'Enables' it, but the wireless remains disabled.
Aspire One D250 wlan/ethernet not working on centos 5.4i have tried alot, searchingon net to findout the both lan card drivers for my new aspire one d250 but coudn't find out. Please help me in finding and installing the drivers. infact i have seen alot people searching for the same but no one has successfully installed any of the lan.
now the thing is im bit of a dumb girl when it comes to computers. Apparently I need to install some Java software just to get my pictures on my facebook. I have tried following the instructions at Java but i am a total newbie lol
I was hoping some of the boys here could help me , I did try look at some other threads but I just get even more confused. Please dont be mad if this is a dumb question coz some of us are not as smart as you guys here. I am also looking forward to making new friends here if you on facebook xx xx lol