Fedora Networking :: Trying To Connect To VPN Server / VPNC Fails?

Jan 6, 2011

I have been trying to connect to my University's VPN Server and for some reason vpnc fails. I have configured the vpn settings the same way I did for the past two years. They worked properly on Fedora 12 and 13, but for some reason fails on Fedora 14.

Code:
Jan 6 16:45:20 exodusprime NetworkManager[1269]: <info> Starting VPN service 'vpnc'...
Jan 6 16:45:20 exodusprime NetworkManager[1269]: <info> VPN service 'vpnc' started (org.freedesktop.NetworkManager.vpnc), PID 11731
Jan 6 16:45:20 exodusprime NetworkManager[1269]: <info> VPN service 'vpnc' appeared; activating connections
Jan 6 16:45:21 exodusprime NetworkManager[1269]: <info> VPN plugin state changed: 3
Jan 6 16:45:21 exodusprime NetworkManager[1269]: <info> VPN connection 'Swinburne University VPN' (Connect) reply received.
code....

View 4 Replies


ADVERTISEMENT

Fedora Networking :: Vpnc To Cisco Network / Starting Vpnc From Nm It Performs Exact Same Way And Getting Blackscreen?

Feb 2, 2010

In fc10 & fc11 everything worked well with vpnc.

With fc12 vpnc starts allows me to connect to my work site then everything works fine til I try and start a remote desktop connections to a windows client use tsclient. All I get is a blackscreen and my laptop is hung.

At work without the vpnc it works fine if I start the vpnc from nm it performs the exact same way and I get the blackscreen.

I have disable selinux.I also disabled the firewall

there was another gentlemen on here with the same issue.

The only way out is a hard reboot and there are no messages in the logs that say there were any problems.

View 3 Replies View Related

Fedora Networking :: Vpnc / Getting Error Unable To Connect, Socket Is Unavailable?

Aug 3, 2010

I am having problems accessing my work desktop through my home computer running Fedora 13. I am able to remote into work through MAC and Windows XP. I loaded vpnc and was able to connect to the concentrator. I also able to ping it too. I cannot connect to my desktop using rdesktop. I get error message ´┐ŻUnable to connect, socket is unavailable. I cannot ping to the desktop.

View 2 Replies View Related

Fedora Networking :: Vpnc Not Connecting To Cisco Server?

Mar 7, 2011

Problem with fedora 13, I am no longer able set up a virtual private network using vpn. The following error message appers:

"/usr/sbin/vpnc: no response from target"

No problem when connecting with ubuntu or windows.

View 1 Replies View Related

Ubuntu Networking :: Vpnc & Network-manager-vpnc Inconsistency?

Jan 13, 2010

I've been trying to connect to my office Cisco VPN several time using the network-manager-vpnc GUI in Ubuntu Karmic with no success. I read a couple of articles and i tried using the direct command line way:

Code:
sudo vpnc office
with the following /etc/vpnc/office.conf file:This is fictional data
Code:
IPSec gateway vpn.office.com
IPSec ID office
IPSec secret 0ff1c3
which worked perfecly.

So i went back to the Network Manager GUI way and i used the same credentials. Same fictional data I got a libnotify message telling me it couldn't connect.Anyone know how i could troubleshoot this issue? Would be great to have it integrated in gnome instead of running a background command which is not tracked by nwm.

View 6 Replies View Related

Ubuntu Networking :: Use VPNC To Connect To A Cisco VPN?

Feb 28, 2011

I use VPNC to connect to a Cisco VPN. I am able to connect, but some issues exist when I use SSH. For example, I login through SSH to a computer in the VPN and I execute ls => it works. If I execute ls -la => connection stalls. I think it stalls every time it is supposed to return more content (top, ls /etc).

If I do scp from my end to server => works. If I do scp from server to my end => connection stalls.

View 1 Replies View Related

Networking :: Only Firefox Fails To Connect In Some Networks Using Fedora 14?

May 23, 2011

In all but one place my HP Pavilion laptop running Fedora 14 will work flawlessly to use the Internet for e-mail, ftp, http, etc. In one network there is a wireless router - Cisco/Linksys E3000 - that allows every computer to use the Internet normally for wireless or for wired connections, every computer but mine. If I use Google's Chrome I can access the Internet. I can ping any web site too, but the moment I try to access anything with Firefox 3.6.17 there is a long delay and the standard error page appears. Weather or not I use a wired connection is apparently irrelevant.The Windows 7 computers in the same network are free of this curious problem. Strangely I have noted a problem like this, possibly the same problem, with another network at a coffee shop and they both share the misfortune of using AT&T, which is proud to not support Linux ... for customers of course (it's good enough for themselves I'm sure)

View 3 Replies View Related

Fedora Networking :: VPN (vpnc) On 14 X86_64 Failing?

Nov 5, 2010

I have a couple VPNs I use for work, and after installing F14 x86_64 it is failing:

Code:
Nov 5 12:40:57 raykj NetworkManager[4106]: <info> VPN service 'vpnc' started (org.freedesktop.NetworkManager.vpnc), PID 4203
Nov 5 12:40:57 raykj NetworkManager[4106]: <info> VPN service 'vpnc' appeared; activating connections

[Code]....

View 2 Replies View Related

Fedora :: After Updating To Kernel-2.6.33.6-147.fc13.i686 The Email (Thunderbird) Fails To Connect To The Pop-server

Jul 13, 2010

After updating to kernel-2.6.33.6-147.fc13.i686, my email (Thunderbird) fails to connect to the pop-server, and webpages (Firefox) load VERY slow, if at all.When I go back to kernel-2.6.33.3-85.fc13.i686, I have no problem at all.Network chipset: RTL8180

View 2 Replies View Related

Fedora Networking :: Vpnc Doesn't Anymore On FC11?

Jun 23, 2009

Since I installed FC11 vpnc stop working. I get "vpnc: no response from target." I tried running it with "strace" and the reason is a timeout: poll([{fd=3, events=POLLIN}], 1, 4000) = 0 (Timeout)

I tried google and adding "NAT Traversal Mode cisco-udp" to the config file works for some people but not for me Does anyone had experience with vpnc 0.5.3 in FC11?

View 3 Replies View Related

Fedora Networking :: NetworkManager-vpnc Doesn't Work

Jun 27, 2011

how nobody else could have run into this in the meantime. [URL] Two friends of mine are having the same issue on Ubuntu-11.4-machines. In short: Connecting to the Cisco-VPN via shell-command "vpnc" works flawlessly, whereas NetworkManager just doesn't connect at all. We had this working in older versions of Fedora/Ubuntu about some months ago...

View 9 Replies View Related

Ubuntu :: Connect To Working PC Via Vpnc?

Feb 24, 2010

I connect to my working PC via vpnc. And always type group, manually. How to do it automatically? Is there way my vpnc console load config file or somethig else?

View 2 Replies View Related

Ubuntu Networking :: Cannot Connect To Wired And Wireless In 10.10 It Tries To Connect But Fails?

Jan 10, 2011

in linux world and have recently downloaded and installed ubuntu desktop 10.10i cannot connect to both wired and wireless ethernet on my laptopit tries to connect but fails in 30 seconds , it says"disconnected" while i am able to connect to the same in windows i have broadcom 4315 and i have tried both fwcutter and ndiswrapper but the problem persiststhe device id is 14e4:4315

View 9 Replies View Related

Fedora Networking :: Establishing A Vpn Connection Using Vpnc / Error Failed To Bind To 0.0.0.0:500: Address Already In Use?

Nov 24, 2010

I am having difficulties in establishing a vpn connection using vpnc (or NetworkManaager-vpnc).

As long as the openswan IPsec daemon is running, vpnc-helper quits with the error message

Quote:

Failed to bind to 0.0.0.0:500: Address already in use
[user@computer ...]# vpnc-helper --local--port 0

If I use NetworkManager-vpnc, then establishing the connection simply fails.
Using the --local-port 0 option does not change anything.

If I stop the ipsec service (service ipsec stop) then establishing the connectiong works, both with NetworkManager-vpnc and the console tool, but apparently the network traffic is not routed via the VPN - in my case this means that I cannot access hosts within the vpn and stuff.

Funny thing is - on my notebook from where I connect via WLAN, everything works fine. With Fedora 13 everything works fine, too.

Does anybody have an idea how to enforce that the vpn connection is actually used?

View 2 Replies View Related

Networking :: PPTP Client Fails To Connect To Microsoft ISA PPTP Server?

Sep 17, 2009

I'm trying to connect to a Microsoft ISA PPTP server from my Linux box. The box I'm connecting from is itself a router. I have no problem connecting a Windows XP machine to the VPN via this machine. This is fine, but I would rather connect via the Linux machine, giving me far more advanced routing options (i.e. no to send every packet from the XP box completely unnecessarily via the PPTP tunnel). The Linux router is running Debian Lenny.

I've checked iptables. There were initially some issues. I've fixed those.

Invoking pppd from the console, I can see that authentication succeeds, but then some negotiation goes wrong and the server terminates the connection. Here's the output from pppd, with the more sensitive stuff removed:

Code:
<hostname>:~# pppd call <peer> nodetach debug
using channel 19
Using interface ppp0
Connect: ppp0 <--> /dev/pts/2
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xe3e45f75> <pcomp> <accomp>]
code....

View 1 Replies View Related

Fedora Networking :: Kmanager-vpnc Vpn Key Lifetime Limit - GUI Doesn't Provide A Location To Enter Information

Jan 6, 2011

I am using KNetworkmanager-vpnc to VPN back to the office from home, the vpn connection works fine - for 15 minutes then I am disconnected. I am fairly certain that this is related to the Phase 1 key lifetime limit. The Knetworkmanager-vpnc GUI does not provide a location to enter this information. I think I found the config file that holds the connection information at /home/<user>/.kde/share/apps/networkmanagement/connections/ I just don't know the proper syntax to put in the file to specify a key life limit. Anyone out there know how to do this? I am using Fedora 14 x64 with knetworkmanager-vpnc 1.0.9-0.28.

View 1 Replies View Related

Fedora Networking :: Vpnc On F12 Broken / Rdesktop Client Opens A "black" Window And Goes No Further?

Jan 9, 2010

I'm having problems with vpnc on F12 that work fine on F10 and F11. On F12, I can connect and can do some activities, but so far I noticed the following (show-stopping) issues:Attempting to connect to an Oracle database using either sqlplus or TORa hangs and eventually times out. I tried both the 11G and 10G instant clients.Copying a file to the host via a smb:// mount in nautilus freezes. An empty file is created though.
A rdesktop client opens a "black" window and goes no further. I attempted to downgrade vpnc on my F12 workstation from vpnc-0.5.3-4.fc12.x86_64 to vpnc-0.5.3-3.fc11.x86_64 to no avail. I also downgraded libgcrypt too and this didn't help either. Moreover, I upgraded these to the F13 rawhide version - still no luck.

I also confirmed on a F11 virtual machine that these work and that it doesn't work on 2 x64 and 1 x386 F12 machines. (The configuration and the host are the same in all cases.)

View 2 Replies View Related

Server :: Openldap Client Fails To Connect Ldap Server 'ldap_bind - Can't Contact LDAP Server

Sep 28, 2010

Just installed openldap server on a VM CentOS called 'ldapsrv', it works fine, ldapsearch returns all ldap information.

Installed openldap client on another VM CentOS called 'ldapclient1', configured it with most basic configuration, no ssl/tls etc. but ldapsearch returns error:

ldapsrv is pingable:

Some outputs:

PHP Code:

PHP Code:

View 20 Replies View Related

Ubuntu Networking :: Wireless Connect Fails At WEP Key?

Oct 19, 2010

Dell mini 10 with ubuntu 10.04/windows xp, connecting to linksys wrt54g. Connected when I was using 9.10, has worked for several months since 10.04 was installed. Still works if I boot XP, but, when booting Ubuntu, router won't accept the passkey which I obtained from my wired computer. I've glanced through a bunch of posts and see several which are close, but no solution. Only cause that I can think of might be a shut down while connected. I say that because it was working and I had no need to change settings.

View 5 Replies View Related

Fedora Networking :: Can't Connect To The Server?

Mar 7, 2010

i want to share my problem that after updating fedora 12 by my mobile broadband. mobile broadband connection stopped working. i mean now it can't connect to the server.

View 1 Replies View Related

Ubuntu Networking :: First Attempt To Connect To Wireless LAN Always Fails?

Jun 24, 2010

The nm-applet starts automatically as it should, and also tries to connect to the local, wireless LAN, but always fails its first attempt. If I click the icon and ask nm-applet to connect again, it always succeeds.

The server, running the wireless LAN, never sees the first attempt to connect, so no wonder this attempt fails. But it would be nice to make it succeed!

View 2 Replies View Related

Ubuntu Networking :: Wireless Can See Networks But Fails To Connect

Jun 30, 2010

I have an Atheros AR242x card. It can see my wireless network (WPA2). When i attempt to connect to the network it asks for the WPA2 passphrase. After entering the password it begins connecting but hangs up for about 3 minutes before saying wireless disconnected. The wireless worked for one day on a fresh install (Ubuntu 10.04)and then started doing this.

View 2 Replies View Related

Ubuntu Networking :: RTL8187 WiFi Fails To Connect On 10.04?

Jul 10, 2010

My Realtek RTL8187 Wifi fail to connect using WPA security. The authentication window shows up repeatedly every time I try to connect. Please note the password is correct. I searched and haven't found a conclusive solutions as of yet.

View 1 Replies View Related

Ubuntu Networking :: Fails To Connect To Wifi From Phone?

Sep 9, 2010

Has anyone else experienced a failure to connect to a mobile network. I have root access wireless tether on my Droid X and I can't seem to connect to it. It times out. My buddies windows box can, and his Iphone will as well. I can see the network just fine, just no connection. Tried changing frequencies as well. And restarting both the phone and laptop.

View 3 Replies View Related

Fedora Networking :: PPTP Server Set Up But Can't Connect?

May 8, 2010

I've got a FC PPTP server up and running but can't connect to it using VPN. I'm using NetworkManager but the connection fails each time. On the server, I'm seeing the following in the /var/log/messages:

Quote:

May 8 16:37:05 li99-23 pppd[2113]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so is for pppd version 2.4.3, this is 2.4.4
May 8 16:37:05 li99-23 pptpd[2112]: GRE: read(fd=6,buffer=8059780,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs

[Code].....

Ive checked that the name,passwords all match, which they do. Has anybody seen this before ?

View 1 Replies View Related

Fedora Networking :: Connect To A L2TP VPN Server?

May 17, 2010

I recently wanted to connect to a vpn server which its tunnelling mode is L2TP.how I can configure my FC 12 to connect to this vpn server?I mean in which files I should enter that server's IP and my username and password.

View 3 Replies View Related

Fedora Networking :: DNS Queries - Connect To A Ssh Server ?

Aug 28, 2011

How often are dns queries sent? Assume I want to connect to a ssh server, will I send one dns-query in order to do that or do I send multiple during my connection? What if I request web-pages, do I send a query only when I enter a site or will I send queries every time I visit a new page on that site?

I'm asking since I'm considering getting an account at dyn.com (the standard account for $30/yr) and it comes with 600 000 queries per month (which is way more than I expect to get but knowing exactly what it means is always good).

View 3 Replies View Related

Ubuntu Networking :: Connect Using ETH0 And Then Seemingly Fails And Disconnects

Mar 29, 2010

A friend called me today and he explained to me that after his ubuntu install he was unable to connect to a wired Ethernet network. He says it trys to connect using ETH0 and then seemingly fails and disconnects. I have him run a if config and send me a pic. The very odd thing about it is He had a lot 5-8 INET6 address? The laptops is Acer extensa 4420

View 1 Replies View Related

Ubuntu Networking :: Unable To Detect Router - Tries To Connect But Fails?

Apr 24, 2010

Ubuntu 9.10 comes with rt2870, the driver for my Zonet ZEW2545, and I have had to blacklist rt2800usb in /etc/modprobe.d/blacklist.conf in order for rt2870 to work. My network adapter is able to attempt to connect to my router, but after 10-40 seconds it tells me I am disconnected again. This adapter works fine on windows.

View 1 Replies View Related

Fedora Networking :: Vnc Server Test Ok But Cannot Connect Remotely?

Jun 3, 2009

I succeeded in setting up a vnc server on a fedpra9 tested it locally and it was successfully connected but no connection done from other machine in the network , even though they can see each othervnc server is pingable se linux is disabled

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved