Fedora Networking :: How To Set Network In Text Mode

Jun 5, 2009

For a certain reason , I have to set network in text mode . My X window need network to start .

I have a router at 192.168.1.1 DNS address: 202.102.134.68 / 202.102.128.68 I want my PC at 192.168.1.2 in LAN.

How to do with it in text mode ?

View 14 Replies


ADVERTISEMENT

Fedora Installation :: Start Network Connection Under Text Mode?

Jul 2, 2010

when I tried to install Nvidia driver for my computer, and when I reboot it, I found i can not log into the x-window mode as the screen display freeze at the point where suppose to be login screen. so use grub go to text mode, try to reinstall the akmod-nvidia xorg-x11-drv-nvidia-libs.i686, but it failed, sames i don't have internet connection to retrieve it. how can I start my network connection under text mode?

View 13 Replies View Related

Fedora Networking :: To Configure Network In Rescue Mode ?

Aug 16, 2011

I made a big mistake. While logged in as root i deleted the /bin directory by mistake. I cannot boot up now...I tried to re-install with the upgrade option...Did it partly but it does not go to the login. I tried a rescue operation and have gone into /mnt/sysimage...However I do not know how to copy my data files over the network to another computer. If I could do that it would be great...I can then backup my file and reinstall.

However I do not know how to setup the network in rescue mode..

Agter going into the network option ...It gave 2 places where I could enter the values ipv4 .and ipv6...I tried entering the old IP address in the first oprtion ........./....Its prompting for some entry to be put after the /. I think its a 3 digit input. Not sure what has to be done.with namesserver and default gateway....I have a small dlink hub and normally (when the system was running) I just needed to go into network manager and enter the machine ipaddress, subnet mask 255.255.255.0 and some value for the default gateway which was not really there....It worked, i could remote connect with another computer in my LAN. How do i enter the 255.255.255.0 in rescue mode?

View 5 Replies View Related

Networking :: Go From Text To Graphical Mode Without Restart?

Oct 14, 2010

Could anyone telme how to go from text mode to graphical without restart.i know we need to change in /etc/initab as runlevel 5.but i want to do this without RESTART.is there any method.currently runlevel is at 3.PLZ TELME I CANT RESTART BCZ ITS PRODUCTION SERVER.

View 7 Replies View Related

Fedora Installation :: Runs In Text Mode ?

Mar 4, 2009

It seems I had no say in the matter. The installer automatically did text mode and it starts up in text mode now. I'm very new to Fedora, though I had Ubuntu installed recently but removed it because Fedora seemed a little more interesting to me. I'm on an HP Pavilion dv2807nr laptop if that helps.

View 14 Replies View Related

Fedora Installation :: 11 Only Installs From 1st CD In Text Mode?

Aug 27, 2009

I tried installing Fedora 11 on my i386 using the 6 CD set that I downloaded. Since my system has only 128M of RAM, the text install mode was used. The 1st CD installation seemed to work OK. After 181 out of 181 packages were installed, the system rebooted and did not ask for me to insert the other CDs. now when my system comes up, it is always in text mode.

Q. Is there a command I can use to have the remaining CD's installed so I can install the graphics system?

View 7 Replies View Related

Fedora :: Connect To Internet While In Text Mode?

Dec 25, 2010

I need help connecting to the Internet while in text mode p.s don't know why but my wireless card lamp for on doesn't light in text mode, i am using a mobile broad band to connect

View 4 Replies View Related

Fedora :: How To Run Pdf Files On Terminal Through Text-only Mode

Dec 30, 2010

I want to run pdf files on fedora 13 through text-only mode(i mean not gui but when i change it to init 3).At gui i know how to do it by converting pdf to html but if we are not at gui?

View 4 Replies View Related

Fedora Installation :: F15 With NVidia Only In Text Mode?

May 31, 2011

I made a clean installation of F15 on my laptop, is a Qosmio x505, it has an nvidia M360, so I download the nvidia drivers and intall it separatly.To install the nvidia drivers I change the runlevel with the commandln -sf /lib/systemd/system/multi-user.target /etc/systemd/system/default.targetAnd then, change it again to the graphical mode with the commandln -sf /lib/systemd/system/graphical.target /etc/systemd/system/default.targetEverything seems ok, but the system only boot in text mode. I can load the Gnome with the command startx without problems, but how can I made that it loads the Gnome automatically?

View 2 Replies View Related

Red Hat / Fedora :: Open Web Browser In TEXT Mode

Apr 16, 2009

I am new in redhat 5.3. i want to open web browser in TEXT mode .is there any way or command used to open browser. I want also open PDF file in TExt mode ...

View 4 Replies View Related

General :: Install Fedora 11 From Text Mode?

Jun 13, 2010

how to install fedora 11 from text mode . I am in a situation to install in text mode only .there is no such option in fedora 11 . Because i have already installed fedora 9 in text mode.

View 2 Replies View Related

Server :: Change From Graphic Mode To Text Mode In CentOS 5.3?

Sep 14, 2009

The system always boot up in Graphic Mode. After installation of Web Server, I want to disable Graphic Mode and change it to boot to Text Mode to save memory. Is there a way to disable graphic mode?

View 1 Replies View Related

Fedora Installation :: Install In Text Mode Totally?

May 19, 2009

I wanna install Fedora 10 in text mode and use it in text mode. So i wanna know what kinda packages or software i should exclude when installing to save some time and space.

View 1 Replies View Related

Fedora :: How To Let Emacs Run In Text-mode In Gnome-terminal

Sep 11, 2010

I had Emacs installed in Fedora 11 and want to run it text-mode,but everytime when I type emacs command in gnome terminal,an emacs graphical window pop up. I want to emacs to back to text-mode by typing M-x text-mode, and it doesn't work.Can emacs run in text-mode in X11 environment?

View 2 Replies View Related

General :: Force Fedora 12 To Start To Text Mode?

Jul 13, 2010

I have a problem with my newly installed ATI driver so my Fedora 12 boots to a frozen graphic mode display.I need to force it to boot to text mode interface to start adjusting my X configuration. What to do?This is a new Fedora 12 installation without any change to GRUB etc.

View 2 Replies View Related

Red Hat / Fedora :: Attach A File To A Mail In Text Mode?

Aug 4, 2010

how to attach a file to a mail in text mode

View 1 Replies View Related

Red Hat / Fedora :: Screen Hangs When Installing In Text Mode

May 31, 2011

I try to install red hat linux and I connect the PC with serial port. I use hyper terminal as terminal. When the machine boot from DVD/CD, there is no text mode (simply graphic) screen come out. Just a strange/rubbish text come out? I also find it is hang when I install in text mode ..below is the hang screen

Code: Linux Plug and Play Support v.0.97 (c) Adam Belay
pnp:PNP ACPI init
pnp:PnP ACPI:found 5 devices
usbcore:registered new driver usbfs
usbcore:registered new driver hub
PCI: Using ACPI for IRQ routing
PCI:If a device doesn't work,try "pci=routeirq".If it helps ,post a report
NetLabel:Initializing
NetLabel:domain hash size=128
NetLabel:protocols = UNLABELED CIPSOv4
NetLabel:unlabeled traffic allowed by default
PCI:Ignore bogus resource 6 [0:0] of 0000:00:02.0
NET:Registered protocol family 2

View 9 Replies View Related

Fedora Installation :: Too Many Installed Packages In Text Mode Install?

Jan 23, 2009

On some computers I can not use graphical installation interface of Fedora 9. So I use text mode.I would like to have a very small installation with very few installed packages, so at package selection I uncheck everything. In text mode installation there is no option to customize installed packages down to package names. I can only check main themes.So I uncheck everything and installation starts. This method results over 400 packages to bo installed... This is too much with many unnecessary packages.If I use graphical interface and uncheck every package name at custom package selection then about 150 packages will be installed.Is there any good way to use textmode installation and don't install more than 400 packages?

View 2 Replies View Related

Fedora Installation :: No Custom Layout Of Partitioning In Text Mode?

Dec 27, 2009

Since the kernel of F11 live-cd can't recognize my video card, I have to run it in text mode. I also have to run "liveinst" in text mode and the install progess seemed ok. But on the partitioning selection step, there is no "custom layout" option! I rembered that in the graphic mode there was such option. How can I find it in the text mode?

View 2 Replies View Related

Fedora Installation :: X Startup Failed And Falls To Text Mode?

Mar 25, 2010

I install Fedora10 in my computer but when it begins the process of installation, it says that "x startup failed" and falls to text mode of installation. Howerver, the graphic mode works in another computer.

View 1 Replies View Related

Fedora :: Konqueror Default View - Embedded Text Editor Mode

Jan 22, 2010

Everytime I open Konqueror, it opens in "Embedded Text Editor" mode . So if I open it then click on a bookmark, it opens in edit mode. I can select View->View Mode->khtml and then the page displays properly. If I click on a link from that page, it displays properly. If I open a new tab, it is back to edit mode. If I open konqueror from konsole, it has the same behavior. I have removed all files under ~/.kde that mention konqueror, kong_* or kfmclient.

I checked the menu entry for Konqueror, and it is "kfmclient openProfile web browsing". I have set the view mode properly, then manually saved the profile in Konqueror. I have checked the system settings file associations, and the konqueror entry has the same application command (kfmclient) as the kde menu entry. Does anyone know how to make the view mode "stick" for Konqueror such that when clicking on html urls or selecting bookmarks causes Konqueror to display properly?

F12 x86_64, latest updates (4.3.4-1).

View 2 Replies View Related

Installation :: System Crash When Trying To Install Fedora 12 In Text Mode / Solution For It?

Apr 30, 2010

I trying install fedora 12 in text mode, but every time the system crash, i cant install in text mode. Someone have one solution ?

View 1 Replies View Related

Fedora :: Grub Starts In Text Mode After Deleting All ATI And Catalyst Stuff?

Jul 3, 2011

use Fedora 15. I had installed driver for my ATI graphic card, as it was written in Fedora guide, then when I rebooted the system the bars and icons appeared with strange, changed colours (purple, green, etc). I've read that this happened because of the bad drivers, so I tried to fix it. Unfortunatelly because I'm Linux newbie and I'm also very nervous I deleted (using Fedora software manager) everything connectedtalyst from my system.Now when I try to start my computer, grub starts in text mode.My question is:What can I do? Do I have to reinstall my system or maybe someone knows how to fix it?I'm quite scared because now I can't launch not only Fedora but also Windows.(I'm writing from another computer

View 4 Replies View Related

Red Hat / Fedora :: Setup And Configure A Server Entirely With Text Only Run Mode 3 On A Virtual Machine

Feb 24, 2011

I'm trying to setup and configure a server entirely with text only run mode 3 on a virtual machine so I can redo my current live server. I'm now trying to set up the firewall of the system using iptables. I've read up on it and came up with the following:

-clear all rules
#iptables -F
-set default policy rules
#iptables --policy INPUT DROP
#iptables --policy FORWARD DROP

[Code]....

Everything above worked for me but just out of interest I looked at my live server which was configured using a GUI. I ran iptables-save and it was pretty much the same but its port open lines read like this:

#iptables -A INPUT -p tcp -m state --state NEW --dport 80 -j ACCEPT

so finally my question is do I really need the "-m state --state NEW"? Wouldn't having that drop established connections on those ports? I'm just confused as to what exactly the NEW state is doing and would it make a difference if I didn't include it.

View 5 Replies View Related

Fedora :: No Monitor Input During Boot, Unable To Enter Text Mode From X Window

Nov 24, 2009

I installed Fedora 11 on my system (see below) using the i686 DVD. The graphical install worked just fine, and after the system booted back up, the X server was working very well.

There is no boot text. On the other system with Fedora 11, I can see the boot text scroll by in the window and/or a progress bar at the bottom of the monitor during the boot sequence. On this system, the monitor says "No Input", and nothing appears until the login prompt for the X window. I am able to enter the BIOS configuration page and navigate through it without any issues. I can also edit the grub commands before Fedora loads without a problem.

If I boot in text mode, no login prompt appears. If I wait long enough, the monitor enters the power save mode since it is not receiving a signal. I am able to log in to the system with my user name and password, and then start the X server. Once the server starts, the monitor turns back ON and all is well.

From the X window, I use the CTL+ALT+F2 key to enter text mode. The monitor stops responding. If I press the ENTER key a couple of times, then press ALT+F7, I can briefly see the text window with a couple of login prompts before the X window starts responding again.

How can I get the text mode to work? Why is there no input to the monitor when booting?

System:
Intel D945GSEJT motherboard with Intel Atom N270 processor
2GB RAM
120GB SATA Hard Drive
Fedora 11 i686

View 4 Replies View Related

Fedora Installation :: 12 And X Startup Failed On Nvidia / Falling Back To Text Mode?

Feb 23, 2010

I have an older PC that was running F11 without any problems. At some point I started updating to F12 through the web and got a a nice black screen that pretty much hosed my OS. (Not a big deal).So I went and downloaded the F12 Live CD which did the same thing.., at some point just after install the screen would be black and reset is the only option.Got the full F12 32-bit DVD and during the installation I get: "X Startup Failed,Falling back to text mode."Finishing the install I get to a nice black log-in prompt so I can log-in as root.From there I cant do much as I am a n00d in Linux to some extent and my network doesn't work

My video card is a Geforce FX 5200 which installed and worked just fine under F11 (without me doing anything but basic install and Ubuntu 9.10)

View 8 Replies View Related

Ubuntu Networking :: No Network After Suspend Mode?

Feb 10, 2011

I have never had a working suspend. But ... every year or so I try it DOH!!! to see if the updates have solved itI used suspend mode today, and when I woke the system up , all seemed fine untill I tried to browse the internet.It told me I was offline. no ammount of clicking "go online" would work.So, then I noticed the network connection was broken.I did a few things to get connected, and I want you all to tell me what I need to put back again ! IPV4 and IPV6, I unclicked the box to require this for connection to complete.Somewhere else, there was a list of servers to ignore. I removed them all. (I think there werre 3) one was localhost another was similar, and the third was a number.I just want to know what these should be set at, because just because it works - doesn't make it right

View 6 Replies View Related

Networking :: Set 2 Network Cards In Bridge Mode?

Apr 7, 2010

I have installed CentOs 5.4 for Snort sensor , on the location where i intend to place the Snort sensor to listen for internal firewall leg (LAN) the switch doesn't support port mirror so i would like to create with 2 nic's bridge and pass trough the firewall internal leg my question how do i set such configuration.

View 2 Replies View Related

Ubuntu Networking :: Network Deactivating During Locked Mode?

Aug 29, 2010

I have a HP Pavillion DV7 laptop running Ubuntu 10.04, and I am having some problems with Ubuntu handling a network connection. Every so often, I leave my computer in locked mode overnight to download something. But, when I do this, the network just deactivates early on [there is a symbol of a blank wireless symbol with a red "?" by it]. Both the wireless and wired network connections are deactivated, and I am using a wired connection. This also sometimes happens in suspend mode, too, but less often. I have to restart my computer before it will connect again, as logging out and back in again does not suffice.

View 1 Replies View Related

Installation :: Steps For Installation Guide Of Fedora 8 64bit On Text Mode?

Mar 4, 2009

Can you give me a step by step screenshot procedure in installing Fedora Version 8 64bit?

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved