What I don't get are any kernel-headers-<version>.<arch>.rpm Files. Don't I need them to rebuild modules and drivers on System B? Otherwise, how should I copy my new headers to System B? BTW, System B crashes when I try to build the Kernel on it, that's why I'm building debugger Kernels on System A.
I've just installed clean copies of both VirtualBox v4.0.8 and Fedora 15. Now I have followed the instructions here : [url] to install the latest VBox guest additions.
Each time I try I get the following message:
The headers for the current running kernel were not found. If the following module compilation fails then this could be the reason. The missing package can be installed with yum install kernel-devel-220.127.116.11-32.fc15.i686.PAE.
However, if I run that command I am told there is no such package available. The guest addition installer continues seemingly OK, but after a restart they are not loaded.
I've just moved to Fedora from Ubuntu due to major issues with its new version.
I get the following error message trying to install dazuko on xubuntu 10.04: "headers for target kernel version could not be found" But when I run sudo apt-get install linux-headers-$(uname -r), I get the message that I already installed the headers. My current kernel is 2.6.34-020634-generic
How can I install dazuko withouth having this problem??
Which is the current stable version of kernel in fedora 10 and how can I installed because right now I have unstable kernel: uname -a Linux blind 18.104.22.168-60.fc10.x86_64 #1 SMP Sat May 9 04:18:14 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
I just want to get back to latest stable kernel of fedora 10. I'm not able from the grub to choose an older because there are only kernels for fedora 9. The problem was that previously I used fedora 9 however I upgrade it but it was still with kernel of fedora 9 so I pick it the unstable of fedora 10 and I installed it. Right now I just want to get back to current version of kernel in fedora 10 so I can upgrade it to fedora 11.
Many here know I distribute alot of live stuff and thus many say I should try to putout as high a kernel version as possible for wireless, netbooks, etc.my questions are about using a much higher kernel version than the installed headers for instance; I use kernel 2.6.34-ZEN in my arch/slackware builds but the slackware version contains headers 22.214.171.124 from slackware and so is that a problem or no?I built the kernel from source using headers 126.96.36.199 in slackware and headers 2.6.34 in arch...now, I may be upgrading those kernels to meerkats 2.6.35-r5 and need to know if having headers 188.8.131.52 is an issue?also, after compiling kernel does it install a new set of headers when you do make modules_install?
I have installed OpenSUSE 11.3 64 bit and want to install VMWare workstation 7.1. I have run the install script for VMWare without any issues. When I start the VMWare Workstation I get a window saying this: Before you can run VMWare, several modules must be compiled and loaded into the running kernel. Kernel Headers 2.6.34-12-desktop Kernel headers for version 2.6.34-12-desktop were not found.
I just ran "yum update" to download the latest kernel from the repository, and noticed that it's 2.6.18-164.11.1 while the latest on www.kernel.org is 184.108.40.206.Out of curiosity, why is there such a discripency between the two? Lack of resources to test and build binaries?
Does anyone know the kernel-headers location, or how to determine that location, in Fedora 13? I'm installing vmware-tools and it's prompting for it. /usr/include/ and /usr/include/linux/ were revealed to have many header files, as shown by doing rpm -ql kernel-headers
However the installer rejected these locations. My only guess as to why is because they're not where the currently-running kernel has them. I also tried /usr/src/kernels/(kernelversion).fc13.i686/include/ with no luck...
where you only get offered the kernel-headers for 220.127.116.11-83 by yum but not the kernel or the kernel-devel? I tried yum clean all and both pointing to the baseurl and mirrorlist and it does the same thing for both. Oddly my other laptop with F14 in the wireless cafe showed all three packages were available.
Installation of VMware Workstation was ok, but at first launch it ask me for path of kernel-headers-18.104.22.168 Why I have different versions of kernel and kernel-headers? How can I make working VMware? Installation of kernel-headers 22.214.171.124 from package-manager seems impossible.What is the path to specify kernel-headers for VMware?
from what I understand kernel-devel does not bring in ALL the header files for install modules. so what i would like to know is how to install true headers instead of using kernel-devel. I found one tutorial, but it was way out of date.
The problem is that I need to use kernel headers like <linux/interrupt.h>. However, those files do not exist in folder /usr/include/linux. Thus, compilation fails. On the other hand, the files exist in folder /usr/src/kernels/126.96.36.199-105.2.4.fc11.i586/include/linux.
How can I get the missing headers into proper place in /usr/include/? I even tried coping, but extra files are then needed and so on.
I tried to use "make menuconfig", but I couldn't see a missing configuration I need.
I also tried to use " yum install kernel-devel". This tells me "Package kernel-devel 188.8.131.52-105.2.23.fc11.i586 already installed and latest version Nothing to do".
Last night at 1:47 AM yum installed the current version of kernel-headers on my RHEL5 server:
Mar 17 01:47:47 linux1 yum: Updated: kernel-headers-2.6.18-164.15.1.el5.i386 Mar 17 13:47:22 linux1 syslogd 1.4.1: restart.
This locked the server up until I could physically get to it this afternoon and reboot the server. I then finished downloading and installing the new kernel, rebooted again, and the server appears to be running fine.
This is the second time this has happened on this server.
Has anyone else seen this problem when you setup yum to automatically update your servers? Other than manually updating servers, does anyone have any suggestions on how to keep this problem from happening again?
I have installed the fedora 14, but there is no kernel source tree.I read the doc "building a custom kernel".But I don't want to rebuild a new kernel.I just want to install the source tree of current kernel.Could someone tell me the way?
I have a fedora 11 with kernel package: kernel-PAE-184.108.40.206-217.2.3.fc11.i686
I would like to install the devel package for this kernel version, but I can't find it, because in the fedora repo there is only the original kernel (220.127.116.11....) and in the updates repo there is only the newest kernel package (2.6.30....)
Where can I find the packages which are between the fedora and update repos' versions?
I've been trying to install Vmware Workstation and keep getting an error about Kernel Headers missing! Although I am pretty sure I have the headers installed for my system. It's looking for the PAE version of my headers which I believe it doesn't exist!
I have a problem to install the VMware Server (VMware-server-2.0.2-203138.x86_64.rpm) on "Fedora 13 Desktop Edition 64-bit".I traied all tips I found, but nothing was OK.Please look my linux configuration and the error messages:
The installation of VMware Server 2.0.2 for Linux completed successfully.Before running VMware Server for the first time, you need to configure it for your running kernel by invoking the following command: "/usr/bin/vmware-config.pl". code....
Yesterday, I think I did something stupid: I removed kernel-headers, gcc, glibc-devel and glibc-headers. My box is a CentOS 5.4 webserver (it has loads of packages installed, but that was done through Virtualmin config, so it's quite coherent all in all). The thing is that now I need to reinstall at least the headers and glibc, but hey! this is what I get :
I'm just installed OpenSuse 11.3 (64) on a 30gb SSD, hoping to get virtualbox 4.0 running to virtualize an instance of Windows 7.I went through some pain with my Nvidia video card and actually getting vb to install, but through lots of searching and tinkering got here.I created a vm in the vb control panel, but when I go to start it I get:
Code: Failed to open a session for the virtual machine Win7Main. The virtual machine 'Win7Main' has terminated unexpectedly during startup with exit code 1.
As a follow-on to something Telemachos said in another post:
Originally Posted by Telemachos
You can see what kernels you have installed - to check if you have a virtual kernel and to clean up - by running this command:
If you've been installing kernel-headers along with the kernels (say to build modules for graphics or wireless), you should remove those when you remove the corresponding kernel. The command to search for those is parallel:
I would have thought that removing a given kernel package would trigger the removal of the older kernel headers. Can someone confirm that is, or is not, the behavior? I ask this because it seemed to me that the older kernel header packages were indeed removed when I removed some older kernel packages.
For example, the linux kernels I have installed are:
Also, the linux-headers packages I have installed are:
So, when I get around to removing the linux-image-2.6.25-2-amd64 package like this:
I would expect apt-get to automatically also remove linux-headers-2.6.25-2-amd64 and linux-headers-2.6.25-2-common. Is that what will happen, or do I need to explicitly state all three packages on the apt-get remove command?