When I plug in my iPhone to my 10.04 machine, it's recognized. I can always drag music from the iPhone to the Music collection in Rhythmbox, but 9 times out of 10 dragging the other ways gives me this error:
"Error while getting peer-to-peer dbus connection: The name :1.219 was not provided by any .service files"
I am using Ubuntu 10.4 LTS and Samba3.4.7.I have read a lot of posts and different web pages on setting up Samba on a Peer-to-Peer network with Windows XP but just cant make it work. I can see the Guest account in XP My Network Places but cant access the folder when I click on it.Network not accessible or you dont have permission. I can PING both ways ok. I have Firestarter turned OFF and I dont have any third party firewall on XP.
This is my samba config file:
[global] netbios name = dolphin server string = Ubuntu workgroup = WATERLILLY - same as XP
I recently upgraded to Fedora 11, and am having an issue with the USB modem (Novatel USB720) disconnecting almost immediately after it is connected. Sometimes it disconnects 30 seconds after it is connected, sometimes 2-3 minutes. And other times it stays connected for hours without a problem. I know the card is good as it works using Verizon Connection Manager software under Windows and never had this problem.
And, I am able to get to the Internet while it is connected, so it is passing traffic OK. I'm using the NetworkManager to connect the "Auto Mobile Broadband" connection. I've seen other posts on this very same issue, and I verified that pppd is called using the "lcp-echo-failure 0" and "lcp-echo-interval 0" options. But it seems that when it does disconnect, in /var/log/messages it says "LCP terminated by peer".
Below is an example of /var/log/messages where we can connect, then it immediately disconnects. Sep 7 09:55:08 c3po NetworkManager: <info> Activation (ttyUSB0) starting connection 'Auto Mobile Broadband (CDMA) connection' Sep 7 09:55:08 c3po NetworkManager: <info> (ttyUSB0): device state change: 3 -> 4 (reason 0) Sep 7 09:55:08 c3po NetworkManager: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) scheduled... Sep 7 09:55:08 c3po NetworkManager: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) started... Sep 7 09:55:08 c3po NetworkManager: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) complete. Sep 7 09:55:09 c3po NetworkManager: <info> (ttyUSB0): powering up.....
My organization just moved to using a zscaler proxy system. Basically, I have to use a .pac file in Firefox to get onto the proxy, which directs me to a series of two Flash pages, one to input my username, one for the password. After reading through the .pac file, I was able to get some command-line things to work by specifying the proxy given at the end. However, this server uses an SSL certificate that is not emitted by an authority, but rather directly by our organization. In Firefox, I had to import this certificate to enable https:// browsing.
Is there any way to "import" this certificate so that yum can use it? Because yum freezes with the error: Code: Could not get metalink [URL] error was 14: Peer cert cannot be verified or peer cert invalid
I have a couple of nfs shares which I configured through the yast NFS client module. It entered these in my fstab file to start on bootup. A sample entry is:
10.2.1.30:/home/opt/Cindy/homenfsdefaults 0 0
As long as the foreign computer is online all is well. If the foreign computer is taken off line, soon after KDE applications such as Dolphin and the panel freeze, even if I am not using the shares. When the foreign computer comes online again, everything unfreezes on my computer and works fine. Likewise, if the other computer is not online when I boot, there is a long delay while the system waits for the share to come up. Is there something in my configuration that I can change to stop either or both of these problems? I am running 11.4 x86_64 on a wired network with static ip addresses.
I am trying to get pppd/chat working with an internal Wavecom modem, but PPP terminates with message "LCP terminated by peer". But, same pppd/chat configuration is working on my own Linux OS with Huawei 3G modem. I tried several options to get it working, but no luck. The problem is happening during the PPP negotiation with the Modem:
rcvd [LCP TermReq id=0x2] LCP terminated by peer
But this only mean that there was a failure during PPP setup between Linux and the Modem. I tested the modem with manual AT commands via minicom to further investigate to problem, but could not even activate the PDP context:
Modem is registered and attached to Vodacom's network:
I'm trying to use LDAP with TLS but allways got Connect error. The message error is TLS : hostname does not match CN in peer certificate So I've tried to generate new certificate with my hostname for CN but my LDAP still don't want to work with TLS.
I use opensus 11.3. I used YAST2 for crating my CA and certificates.
My system just crashed. kduffy101@kduffy101-desktop:~$ firefox WARNING: pipe error (3): Connection reset by peer: file ./src/chrome/common/ipc_channel_posix.cc, line 404 Segmentation fault kduffy101@kduffy101-desktop:~$.
I've happily been using rdesktop to access my MS Vista desktop from Ubuntu (Hardy) for a few months until a couple of days ago when it stopped working. Now if I try connecting I get the following:
I don't believe anything's changed on the client (Ubuntu) side. The Vista box is occasionally connected to a corporate intranet via VPN and it was after such a session that rdesktop stopped working, so perhaps a Windows group policy was modified during the session. I've checked the basics - can ping 10.1.1.2 from Ubuntu, can access port 3389. Have deleted ~/.rdesktop and ~/.tsclient.
Digging around the Vista client I noticed in Control Panel > System Properties > Remote that in the Remote Desktop sub-panel the Allow connections only from computers running Remote Desktop with Network Level Authentication setting is enabled and that the other two are greyed out. Now, I don't know whether this setting has been changed but I suspect that it might be the problem.
Unfortunately, I don't know enough about Windows to know how or even whether I can change this setting to Allow connections from computers running any version of Remote Desktop (less secure) I've poked around the group policy editor (gpedit.msc) but no joy.
I've followed [URL] to set up vpns with some external networks. So far it worked like a charm on two of them. But when trying to connect to the third one I instantly get bumped off.
When running Code: pon dymka debug dump logfd 2 nodetach
I get this as part of my output Code: CHAP authentication succeeded sent [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>] rcvd [IPCP ConfReq id=0x26 <addr 192.168.0.2> <compress VJ 0f 00>] sent [IPCP TermAck id=0x26] rcvd [CCP ConfReq id=0x3e <mppe -H -M +S -L -D -C>] Refusing MPPE stateful mode offered by peer MPPE required but peer negotiation failed sent [LCP TermReq id=0x2 "MPPE required but peer negotiation failed"] sent [CCP ConfRej id=0x3e <mppe -H -M +S -L -D -C>] rcvd [CCP ConfNak id=0x1 <mppe -H -M +S -L -D -C>] Discarded non-LCP packet when LCP not open rcvd [LCP TermAck id=0x66] Connection terminated. Waiting for 1 child processes... script pptp xxx.xxx.xxx.xxx--nolaunchpppd, pid 8920 Script pptp xxx.xxx.xxx.xxx --nolaunchpppd finished (pid 8920), status = 0x0
I've looked all over the internet but sollutions like adding mmpe-stateful to options.pptp doesn't work. Is this a problem with the client or with the server? Because the server is configured just like the other two and they work as intended. Seemed to be a problem on the firewall.
I want to view the files for RepRap, but do not know which java files to install. Here is the error readout from running the reprap shell script.
Code: keeper@keeper-netbook:~/Desktop/reprap-mendel-20100105$ ./reprap Exception in thread "Main" java.awt.AWTError: Cannot load AWT toolkit: gnu.java.awt.peer.gtk.GtkToolkit at java.awt.Toolkit.getDefaultToolkit(libgcj.so.81) at java.awt.EventQueue.invokeLater(libgcj.so.81) at javax.swing.SwingUtilities.invokeLater(libgcj.so.81)
When I do an amcheck, I get this Amanda Backup Client Hosts Check WARNING: noname.com: selfcheck request failed: recv error: Connection reset by peer Client check: 1 host checked in 0.022 seconds. 1 problem found.
I am using bsdtcp. I get an ack error if I switch the client to bsd authentication. What should I do, how do I fix it? I read that I should enter servers address to hosts file in /etc/ directory? Here is the log in /var/log/messages:
I am a system administrator and i have configured squid server at the server side.Now i am facing a problem that these two websites are not accessible through squid transparent proxy server while they are accessible when changing the gateway.The websites are following:-
This type of error message comes ERROR The requested URL could not be retrieved While trying to retrieve the URL: [URL] The following error was encountered: * Read Error The system returned: (104) Connection reset by peer
I have an external hd attached to my one computer at home, use DynDNS to give it a static address, and can usually ssh into the machine fine. I ran update a few days ago and now have the much-aligned "connection reset by peer" error. I checked the machine and made sure everything was "normal;" e.g., checked ssh config for the port change (correct), doubled-checked ufw to make sure the port was open (it was), etc. I ran nmap on the machine and it said the port was open. This morning when I arrived at work, I ran nmap on my machine here where I've been unable to connect and its results were a little surprising: the port I specified at home and was demonstrated as open is not. WTF?
I have been using GPRS on a Nokia 6230 on PCL 2009 for months, no problems. Got the C5212 2 days back. First, it would not connect using the old wvdial.conf file (the modem was detected on the same ttyacm1 port), throwing up an error I don't recall now. Then I did a wvdialconf, and edited the resulting file, and this time I got an error "Voice line detected".
The phone came with the windows software, so tried getting online on a Win install. The phone connected, but the procedure involved disconnecting the phone (as described by the software itself). Assuming this "disconnection" could be a reason for wvdial to fail, I tried again on Linux. This time I could get online, without a hitch.
Yesterday, I abruptly started facing a new problem "LCD Terminated by Peer". I had used the phone error free for more than 2 hours. Then I disconnected and plugged it again, and voila the error! I have looked at many sites and their solutions. None of them seem to change this situation. The most popular tip is to comment out all lcp related lines in the /ppp/options file. I am using wvdial and kpp, and my options file did not have those lines in the first place.
which cropped up today after no changes to the system: I can successfully ssh into my ubuntu 64-bit 9.10 machine (via OS X with iTerm), but after about 30 seconds, the connection drops with the message "Connection reset by peer Connection to xx.xx.xx.xx closed".
If I then try to immediately ssh back in I get: "Write failed: Broken pipe". If I try to immediately ping the machine instead, I cannot ping it until the ~10th try. Eventually I can log back in again, only to be kicked off after between 5 and 60 seconds. I called the network people and their are no known issue right now with networking. The networking on the ubuntu machine is otherwise fine, it seems. In the /var/log/auth.log file, it simple says:
Quote: Feb 9 14:19:20 harriet sshd: Accepted password for xxx from xx.xx.xx.xx port 55105 ssh2 Feb 9 14:19:20 harriet sshd: pam_unix(sshd:session): session opened for user xxx by (uid=0) Feb 9 14:19:28 harriet sshd: pam_unix(sshd:session): session closed for user xxx
The solution I come across to a similar problem is to add a "ClientAwakeInterval" number to sshdconfig, but this (as expected) doesn't fix my problem.
Frostwire and Nicotine + they both have outdated RPM's for 10.x that dose not support 11.3. They have newer .deb files. What would I have to do to install a .deb file. Navigate to the file using CD (change dir) and then? Model: Toshiba L505-ES3045 (Intel i3, 4gb Memory, OpenSuse 11.3/Windows 7, Intel HD Graphics) OS: OpenSUSE 11.3 Prior OS's: Mac OS/X11/Fink/Windows XP/Vista/7.
I am pragmatically trying to upload a list of files from my client machine to a proFTPd server I have running on Ubuntu. Every time I get several (around fifty) files into the transfer, I get the following error: Quote: Connection reset by peer: socket write error
I am able to remotely upload 25,000 small files of ~ 1K in size, but when I go to upload hundreds of 2-4 Mb files, I get a socket write error. Am I using up all available sockets before they can be released? If so, how do I release the sockets? If not, what does this error mean and why am I getting it?
I AM able to connect from CLI using sftp to the ftp server using port 2222.
Code:[URL]... I can ls/dir on the server as would be expected. However, if trying to use either bareFTP or filezilla I keep getting errors on trying to connect to sftp. I have gotten a range of errors from "reset by peer" to "Pageant unreachable". I have been thinking it is my firewall, so I flushed out bound and set to ACCEPT to test. INBOUND was set to allow ESTABLISHED, RELATED. I set up a log rule to catch everything which didnt show any drops on my side ( I may be reading them wrong though).