Fedora :: Installation Of VMWare Server 2.0.2 On 13

Jun 21, 2010

I know this has been discussed many times, but with the current versions, things have changed again. So I ask again.

I am installed:
- Fedora 13, x64

I want to install, config and run:
- VMWare Server 2.0.2 (Community Edition)

I have already upgraded my Fedora 13 system using important commands:
- yum install kernel-headers kernel-devel
- yum install gcc

I have a directory:
/lib/modules/2.6.33.5-124.fc13.x86_64
with some subdirectories, but no include folder there.

vmware-config found the gcc, but cant find the kernel-header files. Also I dont know how to give it the correct path to these kernel-header files.

View 4 Replies


ADVERTISEMENT

General :: Vmware Server 2.0.2 Installation On 12 - Making Sure Services For VMware Server Are Stopped

May 19, 2010

I have installed fc12 on my core2due machine, and I have installed the vmware server on it, its rpm is installed successfully with out any error, after that a message is displayed

The installation of VMware Server 2.0.2 for Linux completed successfully. You can decide to remove this software from your system at any time by invoking the following command: "rpm -e VMware-server".

Before running VMware Server for the first time, you need to configure it for your running kernel by invoking the following command: "/usr/bin/vmware-config.pl".

I tried this command and find the this message

[Akram@localhost Downloads]$ su -c "/usr/bin/vmware-config.pl" Password: Making sure services for VMware Server are stopped.

None of the pre-built vmmon modules for VMware Server is suitable for your running kernel. Do you want this program to try to build the vmmon module for your system (you need to have a C compiler installed on your system)? [yes] yes

Using compiler "/usr/bin/gcc". Use environment variable CC to override.

Your kernel was built with "gcc" version "4.4.2", while you are trying to use "/usr/bin/gcc" version "4.4.3". This configuration is not recommended and VMware Server may crash if you'll continue. Please try to use exactly same compiler as one used for building your kernel. Do you want to go with compiler
"/usr/bin/gcc" version "4.4.3" anyway? [no] yes

What is the location of the directory of C header files that match your running kernel?[/usr/src/linux/include]

Now it asks me in last lines that "What is the location of Directory of C header files that match your running kernal?"

View 1 Replies View Related

Fedora Installation :: Looking To Install Either Vmware Server , Virtualbox With F11?

Oct 21, 2009

I'm looking to install either vmware server, virtualbox or another solution.

Which works the best with fedora 11? I'm interested in USB and performance.

btw, I wasn't sure which forum to put this in

View 4 Replies View Related

Software :: Importing A Vmware Virtual Machine File Vi Vmware Server 2.0.2?

Jul 27, 2011

I completed the installation of VMWare Server 2.0.2 onto a CentOS 5.4 64-bit distribution. There is a VMware virtual machine file on the server in question, and I want to activate it through the application console.

I did not see anything readily apparent that would facilitate the importing of the virtual machine file. Does anyone have a procedure that can accomplish this task?

View 5 Replies View Related

Ubuntu Installation :: VMware Server On 10.04 ?

May 31, 2010

I have just loaded Ubuntu 10.0.4 all OK

Loaded VMware Server 2.0.2 All OK

Opened VMware Infrastructure Web page and created new machine. Still OK

Click on new machine and go to console and power on.

Receive error:

Cannot access virtual machine console. Request timed out. The attempt to acquire valid session ticket for "xxxxxx" took longer than expected. If this problem persists blah blah blah

I suspect this is a problem with Mozilla Firefox 3.6.3.

View 9 Replies View Related

Debian Installation :: Vmware Workstation 7.1.4 - Can't Complete Compile Modules Of Vmware

Jun 6, 2011

I want to install debian on vmware workstation 7.1.4 but there's a problem! when I try to install vmware tools or open-vm, it can't complete compile modules of vmware. It is a big problem... It seem problem of kernel version after 2.6.37... But I can't find solution. logs.... Before you can compile modules, you need to have the following installed...

[Code].....

View 2 Replies View Related

Fedora :: Install Vmware Server On 11?

Jul 3, 2009

I want to install vmware server on fedora 11. I have tried to and have had issues. how to install.

View 14 Replies View Related

Server :: Cluster Installation In Vmware Workstation With Centos

May 5, 2011

I just wanna simulate HPC and and other kinds of clusters in VMware workstation 7.0 , in my HP 520 laptop which is dualcore and 3Gb RAM. So can u please help me out regarding this.. I am interested to work in clusters. I am new to this hpc and other clusters..please can any one gve me document on cluster installation and configuration. I would be grateful to them.. I am using Centos OS.

View 4 Replies View Related

Server :: Debian 5.0.6 Iptables Modules Installation - VMware

Mar 2, 2011

I use Debian 5.0.6 32-bit through VMware workstation installed on my Windows Server 2003. I just simply installed it from CD-1 and I use Directadmin on that.

I need a lot of iptables commands for blocking but I keep getting missing module errors on that one, I did lsmod | grep -i iptables to see there are no modules. It should have been installed by the disc image but I don't know why it didn't. So I now want to know how to get those modules required by iptables.

View 3 Replies View Related

Server :: Kickstart Installation Of RHEL5 On Vmware Workstation

Jul 19, 2010

Can we do kickstart installation of linux on Vmware Workstation.

View 1 Replies View Related

General :: VMware Snapshot With VMware Tools Loses Network On Restart - Host XP - Guest Fedora

Oct 3, 2010

I have been using VMware Player for some time to host Fedora VMware images on Windows XP. I have been using Fedora 11 and 12 (both 32 and 64 bit) and recently started to use Fedora 13.

I use as a base the images provided by thoughtpolice. http://www.thoughtpolice.co.uk/

I usually install VMware tools and also keep the images updated (yum update) which sometimes changes the kernel.

I have recently had problems with the snapshots not having a network when I restore them. So far I don't have the problem with Fedora 11 and do have it with Fedora 12 (but used not to). I do have it with Fedora 13.

In each case the problem goes away when I uninstall the VMware tools and comes back when I install them again.

One of the symptoms is that SElinux complains about not being able to do something with /var/run/vmware-active-nics.

It looks to me that something is incorrect in the actions being taken when the snapshot is being restored. It does not happen every time and sometimes the network restores itself.

The network can be restored by rebooting the image.

View 12 Replies View Related

Fedora :: Configuring DHCP Server On VMWare?

Aug 27, 2010

I am trying to configure dhcp server in linux 5.4 version on VMWare. DHCP is already installed in my machine but I am not able to start the service. Whenever I give service dhcpd start/restart, it gives message:

Starting Failed My configuration file is like this:
[root@chaitu etc]# /etc/init.d/dhcpd start
Starting dhcp: [FAILED]
[root@chaitu etc]# vi dhcpd.conf
ddns-update-style interim;
ignore client-updates; .....

View 6 Replies View Related

Fedora X86/64bit :: How To Install VMWare Server

May 26, 2011

I am using F14 Kernel 2.6.35.13-91.fc14.x86_64 and I tried to install VMWare Server using this toturial Click Here .

Unfortunately, I got this error "There is a problem compiling the vmnet module after it was patched." in this step on the second page:

Code:

Note that I used the names on my Laptop and here I am attaching What I Have done.. (txt is attached)

How to install any vmware Because I have to install Windows 7 on it.. Note that mine is 64-bit

View 3 Replies View Related

Red Hat / Fedora :: Install Vmware Server On CentOS 5.5?

May 27, 2010

I have installed CentOS on a VMwareWorktation and that CentOS, i also install VMware Server (suscess) and setup a guest OS that,

but i start this Guest OS, an error show "You may not power virtual machine in virtual machine"...

View 7 Replies View Related

Ubuntu Installation :: Vmware-server-console Doesn't Start On 11?

Jul 18, 2011

After upgrading Ubuntu to version 11, vmware-server-console stopped working - only gray window opens. After killing the process error message appears:

/usr/lib/vmware-server-console/bin/vmware-server-console: symbol lookup error: /usr/lib/i386-linux-gnu/libgio-2.0.so.0: undefined symbol: g_cclosure_marshal_VOID__VARIANT

View 4 Replies View Related

Fedora :: Cannot Mount USB Drive In Guest 8 O/S On VMWare Server

Nov 2, 2009

I'm running VMWare Server 2.0 on WindowsXP as host.I have guest O/S Linux Fedora 8. i cannot access USB drives on my VM. USB drive shows up on the VMware console window as part of my devices, like CD/RW drive, etc. But for the usb drive, it is GREYED OUT./proc/partitions never shows a USB device upon connection of the drive. I have tried googling this to death and found no solution that works.

View 1 Replies View Related

Server :: Select NAT For Networking Between Vista And Vmware[fedora]?

May 25, 2011

i have a problem with configuring samba on a fedora system in Vmware with a vista host.

i should select NAT for networking between vista and Vmware[fedora]?

then what can i do to see shared drive on linux in vmware? internet shared form vista to vmware but samba do not work. when i select network place on fedora i saw this errror : unable to mount location

View 4 Replies View Related

Ubuntu Installation :: 10.04 64-bit Server With Vmware And SSD - Setup The File System On Each Partition?

Apr 24, 2010

I have just bought two SSD, Intel X25-M 80GB, to install Ubuntu 10.04 64-bit server with vmware on a computer with 8GB RAM. I have tried to find out how to set up the system, but is somewhat confused on the setup. The idea is to use software raid to aviod data loss if one SSD is giving up in the future. When installing I have thought about using tree partitions.Swap Root Vmware vhd When reading about how to optimize vwware I found this:

Quote: Disks, Disks, Disks: I always attempt to put my guest OSs on their own partition and I format that partition thusly because VMWare server reads guests in huge blocks (/dev/sdb1 is the partition my guests reside on): mke2fs -b 4096 -R stride=8 /dev/sdb1

Then I set the block readahead value to somewhere around 16384, but you can go as high as twice that value (in my case this is an entire disk array, so I dropped the partition indicator): blockdev �setra 16384 /dev/sdb

How should I setup the file system on each partition? When using an SSD, each partition should be aligned. How do I do that? Let say I would like to have 4GB swap, 60GB root and the rest for vmware. At last, I have fount out that full support for TRIM is supported by kernel v2.6.33. Ubuntu 10.04 is using v2.6.32? If so, for full TRIM support I must upgrade kernel to v2.6.33.

View 1 Replies View Related

Fedora :: VMWare Web Server - Can't Access Tomcat On Port 8080 From The Outside World

Jul 29, 2009

I am having trouble getting my FC10 with tomcat visible to the outside world. first off i am somewhat new to linux. I am running vmware workstation to host my linux web server. i have my VMWare setup to use my second NIC solely. it is bridged and the tcp/ip is disable from the host. i can ping the ip address but cant access tomcat on port 8080 from the outside. i can hit it fine from inside fedora. i have configured my router (wrt54gs with DD-WRT firmware) for port forwarding. so basically i think that the problem is somewhere in between the host and the vmware configuring allowing the port to be forwarded through.

View 2 Replies View Related

Fedora Installation :: Can't Compile VMware 7.1.4 On 15

Sep 8, 2011

When I try to run VMware 7.1.4-385536.x86_64 I see this message: "Before you can run VMware, several modules must be compiled and loaded into the running kernel GCC 4.6.0 GNU C Compiler (gcc) version 4.6.0 was not found etc.." I am running: 2.6.40.3-0.fc15.x86_64

View 3 Replies View Related

Fedora Installation :: Unable To Install F10 Using VMWare

Oct 4, 2009

Actually I found a discussion on this topic. But my problem a bit different from the discussion made over there...The major discussion in that topic is related to the Graphics Issue. But my problem is with the CPU(as my machine says so).... I am posting my screenshot herewith. Please take some time to review it. This would be grateful.

Actually the error says: "This Kernel requires an x86-64 CPU. but only detected i686 CPU. Unable to Boot - please use a kernel appropriate for ur CPU." What does this mean?? My machine has Intel Core 2 Duo t6600 processor. Is Virtualization Playing a role in this issue...??

View 3 Replies View Related

General :: NS2 Installation On Fedora 14 Installed On VMware

May 24, 2011

Am new to linux and am trying to install NS2 on Fedora 14 running on VMware, the am following the instructions at: [url], however, on step 5: tclcl installation am receiving the follow error and have tried to look at other posts but no luck.

View 7 Replies View Related

Fedora Installation :: 14 Installation Error On VMWare

Mar 7, 2011

Ive tried to install Fedora 14 in a VMware Workstation 7.1.3 and theres the following error: "Running anaconda 14.22, the Fedora system installer, please wait. 23:19:38

The following error was found while parsing the kickstart configuration file:

The following ocurred on line 65 of the kickstart file:

View 2 Replies View Related

Fedora Installation :: Download , Compile And Install Vmware?

Feb 25, 2009

I have installed vmware but it is asking for GCC 4.3.2

GNC C Compiler (gcc) Version 4.3.2

how do I download, compile and install it?

View 5 Replies View Related

Fedora Installation :: Error While Trying To Install Vmware Tools - 11

Oct 22, 2009

I have Vmware Fusion 2.0.6 (196839) running on my MacBook Pro. I installed Fedora 11 on the fusion and it works fine. The only problem that I am having is that when I try to install vmware tools, by runnning ./vmware-install.pl in the terminal, I am prompted with this message: What is the location of the directory of C header files that match your running kernel? [/usr/src/linux/include]

If I press Enter, the same message pops up. I am fairly new to linux, and I am just setting this up so I can set up a web server on this virtual machine for testing purposes.

the kernel that I have running is:

root@box1 include# uname -r
2.6.30.8-64.fc11.i686.PAE

View 1 Replies View Related

Fedora Installation :: What Is The Path To Specify Kernel-headers For VMware

Jul 11, 2010

I've installed F13. Installer has set:

kernel-PAE-2.6.33.3-85.fc13.i686
kernel-headers-2.6.33.6-147.fc13.i686

Installation of VMware Workstation was ok, but at first launch it ask me for path of
kernel-headers-2.6.33.3 Why I have different versions of kernel and kernel-headers? How can I make working VMware? Installation of kernel-headers 2.6.33.3 from package-manager seems impossible.What is the path to specify kernel-headers for VMware?

View 2 Replies View Related

Fedora Installation :: VMware Tools For The Sake Of The SVGA Driver Alone?

Feb 3, 2011

I'm trying to install VMware Tools for the sake of the SVGA driver alone. For the life of me, I cannot get it to work. I'm able to run ./vmware-install.pl but when it comes to configuring it that's where I've run into trouble. I've been trying and trying and trying and trying all morning to get this to work and I'm getting very frustrated now. It keeps asking me, "What is the location of the directory of C header files that match your running kernel?" I've Googled this and read several threads on the issue, tried every conceivable path I think it might be and it keeps coming back again and again saying "The path "<path>" is not valid. Would you like to change it?" WTF!? Can somebody please tell me what the default location of the C header files is under Fedora 14? Geez Louise I just want to install VMware Tools, for Christ's sake! It shouldn't be this difficult. BTW,

View 3 Replies View Related

Networking :: Bonded NICs At Host OS - Ubuntu Server - Bridged To Virtual OS - UServ - In VMware Server

Jul 19, 2009

Just something that struck me while working on our virtual servers today.

I have bonded 3 NICs at the host in Ubuntu Server 8.04 LTS. They are using mode 0 for Round-robin. Point is to increase the speed/performance of all the servers, but mainly the fileserver. The fileserver is a virtual server running Ubuntu Server 8.04 LTS on VMware Server 2.0.

1) I noticed the NIC in the slave OS reported link speed as 1000 and Im unable to change it as the NIC (virtual one) doesnt support it. Does this not really matter, as the NIC doesnt exist, and it will run at higher speeds anyway? Or do I have to remove the bond on the host, bridge all 3 interfaces from the host to the slave OS, and then make a bond in the slave OS?

2) While at it, does mode 0 only increase performance on data being sent from the host or does it also increase the available incoming bandwidth?

View 1 Replies View Related

OpenSUSE :: VMware Server And Windows Server 2008?

Mar 6, 2010

you can install vmware on opensuse but can you run windows server 2008 from vmware installed on opensuse?

not that i care, but the only use of vmware ive used is for network simulation

honestly i'm not sure what vmware is for besides that, exept i've heard for programming I think

View 9 Replies View Related

General :: Cannot Install Ubuntu Server 9.10 To Vmware Server 1.0.6

Apr 28, 2010

I cannot install ubuntu server 9.10 to vmware server 1.0.6.. is it the version of my vmware? everytime i try to install ubuntu 9.10, nothing happens..

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved