Fedora Installation :: Mce Remote Contro Model 1039?

May 27, 2009

I have installed fedora 10 with mythtv. at some point the remote control was working then i had to reimage the computer again. Now the remote wont work Im not a linux guru this is why is so dificult.

i know that it is installed because i do this lsusb and get
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 003: ID 413c:2105 Dell Computer Corp.
Bus 004 Device 002: ID 0471:0815 Philips eHome Infrared Receiver
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

[Code]...

View 1 Replies


ADVERTISEMENT

Fedora Installation :: F12 Not Working With Riva TNT2 Model 64 Graphics Card

Nov 18, 2009

After a fresh install of F12 on pc with Riva TNT2 Model 64 graphics card, Login hangs once booted.

Worked fine on f11.

View 13 Replies View Related

Ubuntu Installation :: Pc Model Seems To Restrict All

Apr 8, 2011

Prior to purchasing this Toshiba L675D I was able on my old HP to explore other distros, but there seems to be some incomparability existing with this model that restricts 10.10 but accepts 10.04, kernel thing I assume. But in all other attempts to install, Mint, open Suse etc it loads the kernel then the Live CD freezes on a black screen blinking cursor. Have tried nomodeset with no success. Obviously Toshiba is no help with Linux and win 7 forum even cautions against creating an extended partition. Oh out of the box this baby had 3 primaries, one a recovery and hidden. Just an FYI

View 1 Replies View Related

CentOS 5 :: Installation On IBM ISeries Model 525/520?

Oct 14, 2010

Is it possible I can install CentOS 5.3 version on IBM iSeries/eServer model 525/520.

how I will be able to perform this installation.

View 1 Replies View Related

Fedora Hardware :: HP All-in-one Printer Model HP Deskjet F2483?

Jul 20, 2010

I have recently acquired me a HP all-in-one printer model HP Deskjet F2483. The printer works fine but am having issues getting the scanner to work. Following instructions I found to Google, this is what my shell looks like:

Code:
sh-4.0$ sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.

[Code]...

View 11 Replies View Related

Ubuntu Installation :: 10.04 Netbook Remix On Acer Aspire One Zg5 Model - Error: No Such Device

Jul 30, 2010

I just tried to install ubuntu 10.04 to the hard drive of my netbook as i prefer it greatly over the standard linpus one. The operating system booted fine from a bootable usb drive and so i thought if i install it it should run.

so...i got to work installing the system...it completed and asked me to restart, which i did. From there the boot up screen comes on for the pc.....the one where it says press f2 for setup and f12 for boot priority....then goes to a black screen. on this black screen i have a message which says...

"error: no such device: 992fddd7-54c1-45e0-b990-7220c6fa9005 grub rescue>"

View 2 Replies View Related

Fedora Hardware :: Many Ethernet Cards - Find Vendor / Model - MAC Address ?

Oct 7, 2010

How can I determine full compliance:

Input data see below.

Code:

Code:

Code:

Result - ethernet devices about which I know the exact information :

Code:

View 3 Replies View Related

Fedora Installation :: VNC Level 3 Installation - Remote Into The System Via My Windows Xp Systems

Sep 15, 2009

What I'm trying to do at this point is setup VNC so I can remote into the system via my windows xp systems. I have VNC installed on those computer and I was able to get GNOME's remote desktop operating when I log in on level 5 and actually logged into my user account. However, when I'm not logged in on level 5 it will reject connections entirely. Ultimately I want to remote into the system using tightVNC and view the level 3 (command line only) thing, and allow me to telinit - 5 to switch to gui if I need it from VNC on the windows system. This way I don't need a monitor, keyboard and mouse plugged into the server. Right now that's what I'm having to do.

The problem is that it doesn't run in level 3 at all and level 5 (gui mode) doesn't work if i'm not logged into an account. So how can I get this to work at as a constant running server no matter what level and login point i'm at? Ultimately for this Linux admin class I have to setup a working server and I figured I'd get a base setup with VNC support that I could log into from school to work off of instead of having to use the local connection. Once I get VNC working on my network i'm pretty sure I can get it working beyond my local network.

Here's some commandline stuff that may diagnose my issues:

Code:

As you can see I'm having issues with the libstdc++ lib being detected. I have it installed, but apparently not everything is setup properly. I also have an RPM file for VNC and I've tried to install it with the gnome shell but it gives me an error: "Can't install /home/[user]/Download/vnc-4_1_3-x86_linux.rpm as no transaction" I'm not sure what that means. When I use the command line I get this:

Code:

View 1 Replies View Related

Red Hat / Fedora :: Log Remote Or External Ip Address Of Remote Clients?

Sep 15, 2010

We're using both SuSe and RHEL servers. Our servers are running behind firewall device and remote root login is disabled in SSH.

We're using NAT.

Remote client connections including failed logins are logged into the /var/log/messages but what is logged are gateway ip of our LAN - the LAN IP of Firewall device.

How can I logged the external or public IP of the remote client?

View 4 Replies View Related

Fedora Installation :: Run A Shell Script From A Remote File?

Oct 4, 2009

if I wanted to run a shell script from a remote file (say on my desktop) in which when clicked the file the shell script would run how would I do so?In other terms, the file would contain the command: sh /home/Phobos/Documents/jes-4-2-2-nojava/JES.sh

However what extension should the file have in order to run on click?

View 5 Replies View Related

Fedora Installation :: Unable To Access Apache From Remote

May 11, 2010

Unable to access Apache from remote server..

Also, my php pages won't load..and php is installed.

View 1 Replies View Related

Fedora Installation :: Exclude Remote Admin Tools

Mar 30, 2011

Sorry if this is the wrong place to inquire. I was wondering if it is possible to install fedora without any remote administration tools in particular SSH?

View 5 Replies View Related

Red Hat / Fedora :: Installation Of Php - Platform With Remote Postgresql Support

Oct 18, 2010

I have two machines. One is for web server and the other is for database server.I need to install php in the web server and postgresql in the database server. I installed postgresql. But could not install php as it needs postgresql library during configuration steps.

View 1 Replies View Related

Debian :: Need Printer - Any New HP Model?

Oct 14, 2010

So my 8 year old HP has finally bit the dust. Any opinions on a new HP model?

View 14 Replies View Related

Debian :: Use Encryption Other Than The SSL Model?

Jul 17, 2011

I don't care for domain 'authentication' by an "Authority". I don't trust no one, so CA's to me are as trustworthy as the gypsy in the park.

I can use a self-signed certificate, but the problem is most browsers makers are Fn idiots that say the connection is not secure, when it actually is, but because I did not folk out cash, it makes my website look bad. I can understand the need for a 3rd party to verify the domain host to prevent man in the middle attacks, but I do not care for this.. and browser makers should take more responsibility and introduce different padlocks for types of authentication, rather than saying "this connection is encrypted, but not secure because its self-signed". What a load of horse s***!

How many times does people stop to read certificate authoraties? I sure don't. I only care weather or not the connection has been encrypted.. so, I am looking for a way for simply providing encryption for my website.

From what I understand, when you submit a CSR to a CA, it includes the private key, meaning that the CA would be able to see the encrypt data, should they get hold of it. This is not acceptable for me.

Is there anything other way to use encryption other than the SSL model that is used typically amongst HTTPS browsers today?

View 2 Replies View Related

Ubuntu :: Particular Brand Or Model Can't Recommend?

Sep 20, 2010

Currently I have a 500gb drive with Ubuntu on half of it. The other half is a soon to be Win7 install. I just picked up an identical drive for real cheap last week and I am interested in advice for going about setting up a RAID 1 for redundancy. My first road block is do I want software or hardware RAID? Is this even possible with a dualboot system? If hardware RAID is the way to go does anyone have a particular brand or model they could recommend?

View 2 Replies View Related

General :: How To Fix Partitions In Rescue Model

Aug 29, 2010

My Centos disk was full. when I remove all the big files, df and du command not show right size. I reboot my server and in to rescue mode, it alert "you don't have any linux partitions".How do I fix it?I not use LVM.my server mount:

/dev/sda1 on / type ext3 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)

[code]....

View 3 Replies View Related

Slackware :: Learn The Development Model?

Apr 15, 2010

I am a slackware user from slackware 9.1, these years I tried many distributions, but slackware always winner. I am familiar with server configuration and desktop setup for slackware, but I know nothing about the development model of slackware, is there a way to learn the development model of slackware?

Like, freebsd, you can checkout the kernel source, tool chains source from cvs then build it, some people will commit and check in the change sets, they have a mailing list for developers to talk about the development, for users to learn what are they doing now.

I know there are many README or Documents for slackware, but I donot know anything about internal development, is there a way? a mailing list? a source repository(cvs/git or others?)

View 5 Replies View Related

Slackware :: Server Brand And Model For 13?

Jun 8, 2010

am thinking of buying new server that is tested in slackware for my company. as file server web server mail server and a capability of multiple hardisk (sas technology)to be use as san server in the future any recommadation?

View 1 Replies View Related

Hardware :: Check Make And Model Of A Modem?

Sep 5, 2010

I have an old external serial modem without indication of make and model.

View 2 Replies View Related

Ubuntu :: Getting Model Of Monitors Connected To Computer?

Jul 19, 2010

I am currently developing an small program in Python and at a certain point, I need to do some "stuff" depending on the monitors that are connected to the computer. I have an intel vga card with two outputs. I want to do something if one of the screens connected to the output is a "Dell", another something if one of the monitors is a "Nec" and another something if both monitors are connected.

So the question is: Is there any way to get the vendor/model of the monitors currently connected to the computer? I did a little bit testing. I plugged both screens to my vga card (the Nec to the HDMI output and the Dell to the DVI output), and the gnome-display-properties tool properly detected the model, size, resolution... of both screens connected. I would like to know if I can use a command on bash (or a library in python) to get the same information.

The /var/log/Xorg.0.log also shows properly:
(II) intel(0): EDID vendor "NEC", prod id 26345
(II) intel(0): I2C device "HDMIDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "HDMIDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "DEL", prod id 41027

I could always parse that file, but it is not the best solution. I also tried the ddprobe command, but for some reason, it only detects one of the screens (the Dell, connected to a DVI cable). I am currently using Ubuntu 9.04 and Python2.4 (just in case it's relevant).

View 7 Replies View Related

Hardware :: Get Serial Number And Model Of USB Drives?

Feb 7, 2011

I have Ubuntu 10.04 LTS. I have a script that prompts you to insert a USB HDD/memory stick then it needs to determine its serial and model and save it to a file. The script can determine the device file of the inserted drive(ex: /dev/sdc) and if hdparm -I /dev/sdc works then all is ok. The problem is that not all USB HDDs/memory sticks work with hdparm. When it does not work I get the following:

Code:

root@izghitu:~# hdparm -I /dev/sdc
/dev/sdc:
HDIO_DRIVE_CMD(identify) failed: Invalid exchange

The other command to get the serial for USB devices of any kind is lsusb -v or lsusb -D /path/to/bus/address The problem of the first one(lsusb -v) is that it lists all USB devices and there's no way for me to script it to detect the inserted USB drive/memory stick and get the serial/model for it. The problem with the second one(lsusb -D /path/to/bus/address) is that I do not know how to get the correct USB bus address of the inserted USB drive/memory stick.

Is there any other way to get the serial number/model of a USB HDD/memory stick using its /dev/sdc device file? Is there any way to link the /dev/sdc device file with the /dev/bus/usb/address device file so I can then use the lsusb -D command to get the required info?

View 3 Replies View Related

Hardware :: Scan From The Document Feeder Get Another Model?

Jan 11, 2011

I have an Epson Workforce 520 all in one that sane recognizes. If I tell sane ( via Simple Scan in Mint Linux ) to scan it scans only from the flatbed. I'm pretty lost here. I want to scan from the document feeder. Do I need to get another model? If so, which would work. I searched the sane hardware compatibility list, but it is not easy to determine if a scanner's ADF works from that list..

View 1 Replies View Related

General :: Find The Qlogin Hba Card Model No?

Jun 20, 2010

i have install a new qlogic hba card, but i dont know its model

View 1 Replies View Related

Programming :: How To Pull Node Pointers Out Of The Model

Mar 25, 2010

I am trying to find a way to pull Node Pointers out of the model, for use in other areas of the program. The solution is probably simple but I haven't had any luck finding it.

Model for a QTreeView:

Code:

class testModel : public QAbstractItemModel
{
public:
testModel();
~testModel();

[code]....

View 2 Replies View Related

Red Hat :: Command To Find System Make And Model?

Jan 27, 2011

Is there any command to find system make and model in linux like how solaris shows "Netra X4200" when we give command "uname -a"

View 1 Replies View Related

Debian :: Choose Keyboard Model In Gnome Shell?

Jul 24, 2011

I've recently upgraded my squeeze to sid, then installed gnome shell as default window manager.

1. Gnome shell was normal until yesterday, I upgraded new packages up to date, then I cannot log into gnome shell any more (however, fallback mode is normal). It shows a sad computer screen with message "Oh no, something has gone wrong". The only thing I can do is pressing the logout button to log out.

2. Debian is running on my thinkpad T60p, and I can choose keyboard model in Gnome2, but I can't find any options in the system setting in Gnome shell to change keyboard layout for model IBM T60/R60.

View 3 Replies View Related

General :: Unable To Model The Power Consumption Of Various Components

Aug 3, 2011

I am working on a traffic surveillance project which performs various image processing tasks with a number of visual sensors and a computing platform. My basic task in the project is the power optimization/management. I am using a ZOTAC-IONITX computing platform (Intel ATOM CPU + NVIDIA ION GPU). The problems that I am currently facing are:

I am unable to model the power consumption of various components e.g., processor, GPU, hard drive, memory etc, since there seems to be no way to measure the power consumption of individual system components. Since I don't have a power consumption model, I cannot come up with a power optimization algorithm. I am currently working on Linux. Is there any way to measure/model the power consumption of individual system component?

I have already checked powertop. It doesn't tells the power (watts) consumed by a component (e.g., microprocessor). It just gives information about the power state the processor is in (However there is no way to change the power state by the user) and the processors that cause processor to wakeup.

View 3 Replies View Related

Ubuntu :: Belkin USb Model F6d4050 And Dlink 655 Router?

Feb 13, 2010

How do I get my ubuntu 9.04 computer to recognise the USB wireless stick and then connect to my wireless d_link router?

View 1 Replies View Related

Ubuntu Networking :: Trying To Install WebConnect Jet Model UMG1691

Jun 25, 2010

I'm trying to install a webConnect Jet Model UMG1691 on to my laptop running UBUNTU version 9.10. I'm using T-mobile as the ISP. I'm new to the LINUX world so you'll have to explain it to me like I'm 3 years old if there's going to be a lot of terminal jargon.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved