Fedora Installation :: Error Message: [root@theraugafamily Network-scripts]# Ifup Eth0

Dec 23, 2010

I am in the process of settign up a home server under FC14. The installation recognized both NICs, one as Intel Gigabit and the other as a Realtek Semiconductor as it should be. But when trying to start eth0 (Realtek) I get the following error message:

[root@theraugafamily network-scripts]# ifup eth0
Active connection state: activating
Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/1
** (process:2296): WARNING **: _nm_object_get_property: Error getting 'State' for /org/freedesktop/NetworkManager/ActiveConnection/1: (19) Method "Get" with signature "ss" on interface "org.freedesktop.DBus.Properties" doesn't exist

state: unknown Error: Connection activation failed. Some more ifo the this NIC as it is of special type.It is a Viking PCI ADSL2+ Modem Card. I am quoting form the description "Being a gully integrated card, no external plug packs are required and cabling is simplified to just an ADSL line connection. The need to purchase an extra ethernet card is also eliminated, as yjis features is build into the card. The onboard Ethernet controller (RTL8139) makes the modem appear to the OS as a standard network card. Thus the Viking can be used with almost any modern O/S without the need for special drivers. This includes Windows, Linux, Solaris, xBSD, etc.." setting ACPI=off in GRUB.conf does not fix the issue

View 2 Replies


ADVERTISEMENT

Ubuntu Networking :: Connection To Network - Terminal: Ifup Eth0 Don't Fix Until Next Reboot

Mar 3, 2010

I have my ubuntu box hard wired into my network. It all works fine, until I reboot my ubuntu box. After reboot, it can no longer see the network. I have it set up with a static ip. Not sure that I set it up completely correctly but it works fine...when working.. To fix the problem, I enter terminal: ifup eth0 That fixes all know problems until next reboot. What do I need to do so that it will remember settings and automatically be hooked into the network at power up?

View 3 Replies View Related

OpenSUSE Network :: Networkmanager (eth0 And Wlan0) And Ifup Wifi Not Working After Monster Update?

Jul 13, 2011

I've had 11.4/KDE working pretty well on dual boot Asus G73SW for a few weeks now. Only issues were the FN-* functions that control keyboard lights and whatnot but no biggie since the essential worked.The last couple of days the update notification was indicating 1,201 updates to be made. Yeah it seemed extreme but I googled around and checked the forums and there was nothing related. I figured I might be missing some packages since I installed from the live KDE CD (still 1202 updates!!!???). So I updated. Big mistake!!!!! Ever since NetworkManager cannot connect to the internet, be it wired or wireless.

Initially it could not even see my home network but it picked it up after I removed the plasmoid from the panel and reinstalled it. However it doesn't respond when I click the network icon and still no connection.I managed to get eth0 working with ifup but not wifi. The last part of network manager log file is quoted below. I can send the whole thing to whoever is interested. I can't make sense of it but maybe someone on the forums can.

Code:
Jul 13 11:09:08 linux-yy10 NetworkManager[1649]: <info> NetworkManager (version 0.8.9997) is starting...

[code]....

View 9 Replies View Related

Networking :: IP Alias Fails When Using Ifup Eth0:1?

Aug 19, 2010

I having a problem with my network. I'm trying to assign an IP alias of eth0:1 to eth0. If I use ifup eth0:1 is fails and corrupts the network. Making the network useless. But if I just enter 'ifconfig eth0:1 10.1.1.51', it work fine? My scripts look like these:

Code:
:network-scripts; cat ifcfg-eth0
NAME="System eth0"
DEVICE=eth0
ONBOOT=yes

[Code].....

View 2 Replies View Related

General :: Eth0 Does Not Start (neither Startup Nor Ifup)

Jun 9, 2011

I'm having a weird problem, eth0 does not start neither on bootup nor ifup...not even issuing /etc/init.d/networking restart...i will show you some info just to check

[Code]...

View 6 Replies View Related

Ubuntu Installation :: Error Message At Step 5: No Root File System

Jun 6, 2010

I am getting an error message at step 5 of 8 in the installation process. I am using Ubuntu LiveCD. The caption of the error is 'No root file system' and the message itself says 'No root file system is defined.Please correct this from the partitioning menu.' I enclose a screenshot of this. I had also problems with booting Ubuntu and Windows after installing Ubuntu to an external hard disk so I probably have to also create a new boot menu (may be it is differently called, 'grub' possibly, I am not really sure).

View 1 Replies View Related

General :: Error Message: Device Eth0 Does Not Seem To Be Present

Jan 14, 2010

solve this error "3c501 device eth0 does not seem to be present, delaying initialization".

View 3 Replies View Related

Fedora Networking :: Network Manager - Adsl Connection - Ifup Ppp0 Doesn't Work

Nov 22, 2009

I have a pppoe adsl connection. When I disconnect and try to reconnect, network-manager keeps asking for my password. I type it again and again with no success. When I reboot, it works again. On ubuntu, I use pppoeconf and it works well. So on Fedora I made a connection with pppoe-setup but neither ifup nor
Code:

pppoe-connect
commands work. When I type
Code:
pppoe-connect
, it says
Code:
/usr/sbin/adsl-start: line 217: 13409 Terminated $CONNECT
"$@" > /dev/null 2>&1
. When I type

Ifup ppp0 doesn't work either. However, with exactly the same settings, ubuntu connects to the internet.

View 2 Replies View Related

Fedora Installation :: Cannot Activate Network Device Eth0

Apr 29, 2010

When i wan to activate device in network configuration, it pop out with "CANNOT ACTIVATE NETWORK DEVICE ETH0". There is a sentence after this also : "rlt8129 device eth0 does not seem to be present, delaying initialization."

View 14 Replies View Related

OpenSUSE Wireless :: RTL819SU Not Working With Ifup (needs Ifup-dhcp First)

Sep 29, 2010

After spending quite some time on this, I have narrowed it down to:

Adapter works OK with NetworkManager
Adapter works OK with ifup if I run iwconfig after ifup has finished

It eppears to be linked to another thread Probl me de r seau wifi / Network manager in that dhcp needs to be running. (So it may be a 'feature' of RTL819 adaptors) So I've finally worked out that I need to start dhcp first.

[Code]...

View 2 Replies View Related

Fedora Installation :: Installing Live CD - Message - Cannot Find Root File System ?

Jan 30, 2010

I have a LiveCD (DVD with many linux versions on it) and no other software on my computer at the moment. The computer specs are as follow:

When I use the live cd I get the following message: Cannot find root file system

I have tried the suggestion along the lines of:

Then it either goes back to Bash or I get "Kernel panic - not syncing: Attempted to kill init"

Then my install just freezes there and I need to restart my computer.

View 5 Replies View Related

OpenSUSE Network :: Using Yast / Ifup Instead Of Network Manager?

May 27, 2010

How do you mannually set up a network using Yast/ifup? I'm trying to get my wireless running on a Broadcom 1390 WLAN. I've gone through the stickies in the wireless forum (this is my first stab at Linux) and have gotten the drivers installed and the internet working (albeit intermittently) using Knetwork manager. It seems that some folks that have had the same issue did not have problems setting the network up manually with Yast & ifup. I've disabled network manager in Yast, and I went through man ifup. It seems I need a "pre-configured interface," but I don't know how to make that happen.

View 9 Replies View Related

Fedora Installation :: Fix Error Message During Installing 14?

Jan 29, 2011

While installing fedora 14 from DVD, during the installing process started half way, the error message appear on the screen " The file ed-1.4-2.fc14.i686.rpm cannot be opened. This is due to a missing file, a corrupt package or corrupt media. Please verify your installation source. " I have download the fedora 14 iso twice the same problem i got while installing. I install fedora 10 or 11 it install successfully.

View 7 Replies View Related

Fedora Installation :: Seeing An Error Message Saying That BootyMgr Is Missing

Sep 20, 2009

I'm trying to install Fedora 11 for the first time. The plan is to create a 10Gig partition on which i would put Fedora and leave Vista on the other partition. I have successfully done this however when i reboot to try and get to VISTA i am seeing an error message saying that BootyMgr is missing....Can you help me with this?

View 10 Replies View Related

Fedora :: Trashed Fresh F12 X64 Installation - USB Error Message

Mar 1, 2010

This, in conjunction with the "If nouveau refuses to die try" instructions, has now apparently basically trashed my fresh Fedora 12 x64 installation, which I had just set up. Another couple of hours gone to waste. I installed the package that Nokia offers as leigh123linux's build instructions last rpmbuild command persistently gave errors, restarted and was left with Nouveau showing some cryptic error message and finally being presented with only the console. Then I did the "if nouveau refuses to die try" part, foolishly figuring the nVidia driver might take over. Now I am left with watching Fedora's legacy boot animation (the loading bar) and then but one USB error message, nothing else. Looks like I'll be stuck with W7 for another while.

View 3 Replies View Related

Fedora Installation :: Boot Message Shows Error / Fix This?

Nov 8, 2010

I upgrade my f13 to f14 with preupgrade but after that i give this boot message.how can i fix this error?

Code...

how can i fix this error?

View 1 Replies View Related

Fedora Security :: Send An Email Using Evolution The Message Was Not Sent But Returns A Error Message?

Apr 30, 2009

Hi I am running a fedora 10 desktop. when i send an email using evolution the message was not sent but returns a error message:"Error while performing operation.DATA command failedError: 550 Viagra SPAM - Hi in Subject" and the message did not have an attachment just plain words. what might have gone wrong for i have been using this for sometime without a problem. or what security measures should be in place to remove this viagra spamAm I infected by virus on this fedora, all my updates are up to date.

View 1 Replies View Related

OpenSUSE Network :: Difference Between Ifup And Ifplug?

Apr 19, 2010

is there any difference between ifup and ifplug?or they just do the thing.

View 4 Replies View Related

Fedora Installation :: Error Message - Failed To Mount 524M Volume

Jan 12, 2011

I just having to do a fresh install and get the following message to close after setting up
partitions and on clicking write to disk:

Failed to mount "524M Volume"
Method "Mount" with signature "ssas" on interface
"org.freedesktop.Hal.Device.Volume" doesn't exist.

Only option under message is close button. I'm using Fedora 14 xfce 32bit live CD. The install seems to carry on normally until done but then when I check the partitions I've setup I seem to only have the origonal uneditted default partitions.

View 2 Replies View Related

Fedora Installation :: Error Message - Boot Failure - Sleeping Forever ?

Aug 11, 2011

I have a fresh computer with specs as such:

Hard Drive: Western Digital Caviar Black 500Gb 6Gbs Sata
Asus Sata DVD/CD Burner
Core i3 3.3GHz Sandy Bridge chipset
MSI P67A-GD55 Motherboard
Zotac GTS 450

I have a problem where the live cd gives this error message:

Boot failure, sleeping forever.

View 12 Replies View Related

OpenSUSE Network :: IFUP - Connected Via HTTP But Cannot Browse

Apr 22, 2010

In Network Settings in OpenSuse 11.1 while using "Traditional Method with ifup" I am able to set up a box as a server and connect via http over the net BUT Firefox cannot browse. If I switch to "User Controlled with NetworkManager" I can run Firefox but my server is not contactable. How do I do both?

View 4 Replies View Related

OpenSUSE Wireless :: Ifup And Network Manager Are Not Using Defined Ssid?

Feb 19, 2011

I just installed OpenSuSE 11.3 on an old IBM T20 I had kicking around and I'm using a Proxim Wireless PCMCIA Card (Atheros AR5001X). Since this laptop does not have a DVD drive I installed the system using the Netboot CD and have the SuSE 11.3 ISO on an NFS/SAMBA file server. The issues appeared after the first reboot, the adapter no longer worked. I resorted to using the wired interface to finish the install.

Once the system was up followed the trouble shooting steps outlined in various places and found the ESSID is not being picked up by the ifup scripts. Not sure if it matters but I have ESSID broadcasts turned off on all my WAPs.

The ESSID is in ifcfg-wlan0. To get wireless working I have to manually issue iwconfig wlan0 essid "xxxx"..

Both networkmanager and ifup fail..

View 9 Replies View Related

OpenSUSE Network :: Knetwork Manager No WLAN - Ifup Working Fine

Mar 29, 2010

I have searched around a bit for a knetwork manager issue I am having on my opensuse 11.2 32 bit install. My wireless card is an 04:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01) I am currently using the Broadcom wl driver

I am on the Internet with this machine as I am typing using the older "ifup" method. I am having great difficulty connecting to the Internet when I use knetwork manger though. The strange part is when I am connected to my router with knetwork manager, I can log into my Router, but I can not get to any web-page/ping any outside address.

so far the best (I was able to locate) advice I was able to get is located in this post. < Broadcom wireless, partchy internet - openSUSE Forums > following a posted how to to disable IPV6 (I suspect this may be the issue??), I was unable to locate modprobe.conf, or modprobe.conf.local, even after I updated via updatdb. I gave a shot at entering in "disable_ipv6=1" into "menu.lst". However, this did not solve my issue with knetwork manager. If my network information is needed when I am "connected" utilizing knetwork manager

View 9 Replies View Related

General :: Network GUI Error Message

Jan 6, 2010

My issue is with my Fedora 9 virtual machine that is running a Scalix mail server (host is F12).

The F9 VM was running fine until this morning when for no reason it crashed as I attempted to initiate a realVNC connection with it.

After a reboot users were unable to send mail to external addresses. When I try to check the network settings by selecting "System" -> "Administration" -> "Network", I receive the following error message:

Code:

View 1 Replies View Related

Ubuntu :: Eth0 Doesn't Exists For Firestarter - Eth0: Error Fetching Interface Information: Device Not Found

May 5, 2010

My network name is eth2 it was changed by some reason and now i got these errors... i installed, reinstalled, re re installed, tried to run the asistant but no luck :/

Code:

* Stopping the Firestarter firewall...
eth0: error fetching interface information: Device not found
eth0: error fetching interface information: Device not found
eth0: error fetching interface information: Device not found

[code]....

View 1 Replies View Related

General :: Installing Ubuntu From A Flashdrive Alongside - Ngside Windows - Error Message - No Root File System Is Defined

Jul 8, 2011

I can use Ubuntu from my flash drive, but I want to install it in a partition alongside windows. When I try to do this, I come to an 'allocate drive space' window, but whatever I do I get the error message: 'No root file system is defined. Please correct this from the partitioning menu.' I just don't know what this means, or what to do next. I'm loathe to ditch windows, and I don't want to have to use a flashdrive all the time.

View 3 Replies View Related

Slackware :: The Computer Booted Up, But Displayed A Message That Said Something To The Effect Of, "Error Occurred During Root File System Check?

Mar 3, 2010

Started slackpkg upgrade-up and went to bed. Woke up to find the power had gone out during the night. The computer booted up, but displayed a message that said something to the effect of, "Error occurred during root file system check. You will be given the option of doing maintenance......"I can get to a command prompt, but regardless of what I do a message pops saying it can't find libblkid.so.1

View 14 Replies View Related

OpenSUSE Network :: Error Message - VPN Connection Failed

Jun 19, 2010

(I'm probably going to have my forum account revoked due to excessive usage ) I'm setting a VPN connection on openSUSE 11.2. Using the networking icon on the tray I add a PPTP connection, set it up but I receive a message 'VPN connection failed'. Googling it up I tried changing a setting called 'refuse-eap' to 'yes' but it doesn't seem to work. Here's the result from the log file:

[code]...

View 1 Replies View Related

OpenSUSE Network :: Apache Error Message - Request Without Hostname

May 4, 2010

Anyone know what this signifies in the Apache logs files:

Code:
[Tue May 04 20:56:06 2010] [error] [client *******] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
[Tue May 04 20:56:06 2010] [error] [client *********] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
[Tue May 04 21:05:18 2010] [error] [client ********] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
[Tue May 04 21:05:18 2010] [error] [client ********] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)

View 2 Replies View Related

OpenSUSE Network :: Mount Command Gets Stuck With No Error Message?

Jun 25, 2011

I am using 11.3 on one machine and 11.2 on the other (a netbook). 11.4 won't install on either and 11.3 on the netbook fails to install as well.

I am using the same setup as I have always used when both systems ran 11.2 (details below) but now I can only mount a drive in one direction. In the other direction the mount command gets stuck with no error message until it eventually times out. I can ping and ssh the machines from each other without difficulty.

Even in the direction in which the mount apparently works (11.2 mounting a drive on the 11.3 machine) when I try to copy files across nothing actually happens.

exportfs -a was run successfully on the exporting machine, and nfsserver is running on both machines as does nfs client.

The exporting machine is 192.168.1.102 (eeelinux) and the other machine is 192.168.1.101 (nina).

Details:
The /etc/exports file on the exporting machine (192.168.1.102) looks like this:
eeelinux:/home/naima # more /etc/exports
# See the exports(5) manpage for a description of the syntax of this file.
# This file contains a list of all directories that are to be exported to
# other computers via NFS (Network File System).

[Code].....

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved