Fedora Installation :: Grub Error 17 - FC15 And Win7 Dual Boot

Jul 5, 2011

I just installed Fedora15 on my laptop. When the installation completed, the system rebooted and gave me a Grub Error 17. I logged in the rescue mode and got the following output from

Code:
fdisk -ls

Code:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0d8b0d8a .....

View 5 Replies


ADVERTISEMENT

Fedora Installation :: Grub Error 18 - Cannot Boot To Win 7 With FC15

Jun 19, 2011

After installing FC15 on my computer, I cannot boot on my windows7 due to an error 18. I installed FC on 2 new partitions I created during the installation, so I guess they moved before my window's.Is there a solution to fix this without erasing my windows partition? (at worse, I'm ok with deleting my linux partitions for I haven't done anything with it yet).

View 5 Replies View Related

Fedora Installation :: Grub In F13 X86_64 With Dual Boot From Two Hard Drive (Win7 In Control)?

Aug 27, 2010

Partition info:

sda2: Win7
sdb1: /boot
sdb2: LVM, containing , home, swap...

[code]....

View 14 Replies View Related

Ubuntu Installation :: Dual Boot (Win7 And 11.04) - Configuring Grub?

Jul 9, 2011

I wanted to install ubuntu 11.04 alongside win7 on my notebook (with no optical drive). I created 2 primary partitions (one for win7 [ntfs] one for ubuntu [ext4]) and 2 logical partitions (one for swap one for general use for storage[ntfs]) by running ubuntu from my USB Flash disk and using gparted. First, I installed win7 without having any problem, then ubuntu also without having any (apparent) problem (I installed boot loader on MBR: the default setting). After the ubuntu installation is over, I was instructed to restart my computer as usual and win7 started without asking me which OS to boot. When I run ubuntu from my Flash disk and run gparted and selected the boot drive as the partition on which ubuntu was installed, I got the error saying "missing operating system". I suppose GRUB is misconfigured and that is causing the problem because nothing went wrong during the installation processes. How to configure GRUB by running ubuntu from my Flash disk. BTW win7 is working just fine.

View 4 Replies View Related

Ubuntu Installation :: RAID 0 And Win7 Dual Boot - Grub Cannot Install

Sep 13, 2010

I'm having serious troubles to install ubuntu-10.04.1. My raid is an hardware raid with intel chipset. Note that win7 is already installed and working with my raid. I made some space from windows, to install Ubuntu (40gb). First, I run the installer, everything seems to be fine. I choose to install Ubuntu were there is the most space free (sorry, I'm not sure about the real terms used there).

Then my partition with the vista loader appears. So the installer can see my raid, and should work fine (everything is detected correctly). But once I'm in the end of the installation (around 95%), a pop-up appears, and tells me that Grub can't install in /dev/sda and it's a fatal error. I can choose an another destination, but it doesn't seems to work.

View 9 Replies View Related

Fedora Installation :: Dual Boot With Vista - Grub Error 15

Mar 7, 2009

I am new to Fedora, having used Ubuntu for 2 years. However, I am a little dissappointed in the latest Ubuntu releases and want to try something new. So I installed Fedora 10 on my second hard drive, deleting Ubuntu. On my first hard drive, I have Vista installed. During installation I followed a guide for dual-booting and it said not to install Grub to the MBR of the Windows partition, so I followed that advice...

This caused a Grub error 15 on the next boot. I booted the Fedora installation from the second hard drive. My hypothesis is that the Grub bootloader of Ubuntu was still installed somewhere and it could not find the Ubuntu linux kernel. Therefore, it gave error 15. So I installed Vista again and am hesitant to try Fedora again... How can I install Fedora alongside Vista properly (as dual boot)?

Or should I stay away, because it is apparently too difficult for me? Is it worthwhile to make a separate /home partition as I read that it is preferred to do a clean install every release? Could I just do that with Gparted and then assign the partition as /home in the Anaconda installer? The downside is that I then need to create a swap and / partition too, right?

View 6 Replies View Related

Fedora Installation :: How To Install Win7 And F12 Dual Boot

Feb 7, 2010

I am a major noob to FC12. I need to install Windows 7 Pro and FC12 dual boot. I first used the windows CD to create 1 250 Gig partition on my 500 Gig HD. Of course windows created the 100 MB system partition. I left the rest unpartitioned. Windows installed okay. I then booted to the KDE FC12 Live CD and installed FC12. I specified to use the Free Space remaining on the HD. The installation finished but now only boots into FC12 and does not prompt me for the OS I want to boot.

View 3 Replies View Related

Ubuntu Installation :: Replacing Fedora 13 With 10.04 On Dual-boot With Win7

Oct 5, 2010

I installed Fedora13 to dualboot w/ my windows 7. I quickly found out that I don't care for fedora. I was referred to Ubuntu, and put Ubuntu 10.04 on in VirtualBox. Lo and behold, I like Ubuntu a WHOLE lot more! So, I promptly went to Disk Manager (in win7) and deleted the Fedora partitions (told you i'm a noob). Of course that was a poor choice, and I was only able to get my computer to boot again by reinstalling f13. neat.

ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

[code]....

SO what i was thinking is go back to Disk Manager, delete partitions sda 3,4, & 5 (the linux ones), then reboot from the Ubuntu live disk? But I don't know what the sdb1 partition is?

View 3 Replies View Related

OpenSUSE Install :: 11.4 And Win7 Dual Boot - Grub Lost?

Apr 1, 2011

I am trying to Dual-boot Windows & and OpenSUSE 11.4, and have run into walls all over the place. Here is what I did:

1. Windows 7 was already installed. (Don't like it, freezes all the time)
2. Installed OpenSUSE using default partition options.
3. Booted into OpenSUSE with no problem
4. Tried booting into Windows, no joy.
5. Got that figured out, now I can get into Windows.
6. GRUB is gone, so now I can't get back into OpenSUSE.

View 8 Replies View Related

General :: Upsize Partitions On New HDD - Dual Boot (11.04 On Win7 With Grub)

Aug 12, 2011

I have been an MCSA for the last 20 years, but recently I have been very impressed indeed with Ubuntu 11.04, having dabbled with and then discarded Susi Linux some five years ago. My problem may be summarised as outlined below: Using the downloadable ISO I installed Ubuntu 11.04 as a dual boot on a Win7 100GB HDD on my Lenovo T61 laptop. No problem they both rock and I'm very impressed. During the installation procedure I selected the largest partition sizes available from the Ubuntu installer wizard being 25GB Extended split into 18GB Ext4, and 3.2GB and 3.2 GB swaps (I couldn't suss out any way of manually increasing them any further).

I found that the 11.04 Startup Manager application didn't work at all, so I downloaded and installed Grub Customizer 2.1..and that did work after a fashion.. certainly enough to actually effect changes in the grub configuration settings. Everything worked so well on the 100GB HDD that I decided to transpose the entire disk image to a new 500GB WD Scorpio and make the dual boot my main working disk. Using Acronis I imaged off the 100GB installation selecting the partition by partition, and retain disk signature options. I then recovered the image to the new 500GB HDD and everything works beautifully on the new HDD.

Except of course all the partitions are still the same size. I won't waste your reading time recounting everything that I have done using Acronis Disk Director (V Good) and Gparted (not so good), but needless to say whatever I do Grub won't have it, and I have lost count of the times that I have re-recovered the good image. Basically I want to increase the partion sizes to apportion larger partitions to both Win 7 and 11.04 and obviously I'm missing something somewhere.

Fdisk -l -u produces..
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x9f011ed1 .....

View 6 Replies View Related

CentOS 5 :: Partitioning Error - Dual Boot With Win7

Sep 23, 2010

I have a problem trying to install CentOS 5 as a dual-boot with my Windows 7. Using Windows tools, I shrunk my main partition and created about a 100GB of unallocated free space. Then, I restarted my computer, booting from the CentOS dvd, but when choosing "Use free space on selected drives and create default layout" option during installation, I get an error saying that partitions couldn't be allocated as primary partitions and that there is not enough space left to create partition for /boot.

View 7 Replies View Related

Ubuntu :: Unsuccessful Dual Boot Installation - Grub Error

Mar 25, 2009

This will make the third time I have tried to load Ubuntu and it has wiped out my Win OS twice and am not sure it hasn't done it again. I installed a 40gb hdd as a slave, have XP on the master. In the process of installing I picked the drive that corresponded to the slave. Didn't understand the the names or titles Ubuntu used but proceeded and the installation went fine although I never saw a place to load Grub on the master drive. After rebooting a couple of times saw the option to click Esc for boot menu but the only choices given were Ubuntu, ubuntu recovery and ubuntu kernel. Can find no mention of my W OS. Have tried to unplug the slave drive but can't boot then as get error message of Grub error.

View 14 Replies View Related

Debian Installation :: Squeeze- Grub Can't Dual Boot -ntoskrnl.exe Error

Jun 7, 2010

I cannot count how many times I have re-installed squeeze, and do all kinds of fixes to grub, but no joy. Every time, there is this ntoskrnl.exe error, and to re-install it. I thought my WIN XP may be corrupted, so I reinstalled it, and updated it with sp3 and all updates. Then I re-installed squeeze (reformatting all partitions). At the end, the installer ask if I want to install grub to mbr. I replied yes. After reboot, only the 2.6.32.3-amd64 and the recovery kernels show up on the grub screen, no winxp.OK, I booted into squeeze kernel and looked at the /boot/grub/grub.cfg file, and there winxp is not included in /etc/grub.d/30_os-prober section. In terminal, I typed

#os-propber and it found winxp in /dev/sda1
then I typed
#update-grub

and now /etc/grub.d/30_os-prober now show winxp.I rebooted, and winxp shows on the grub screen, and I chose winxp.It came back with "ntoskrnl.exe ...error... re-install ntoskrnl..."Here are the details:

fdisk -l
root@SHUM-AMD64:/home/shum# fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders

[code]....

View 14 Replies View Related

Ubuntu Installation :: Failed Install (dual Boot) Grub Error 17

Dec 4, 2010

I just tried to install Ubuntu 10.04 on my windows machine. Unfortunately there was an installation error and now the computer will not boot up in windows anymore (I get grub error 17). I had Ubuntu 7.04 before, but when installing 10.04, I deleted the 7.04 partitions. Is there a way to recover the ability to boot into windows?

View 1 Replies View Related

Ubuntu Installation :: Dual-boot `GRUB Hard Disk Error'

May 9, 2011

My system has Windows XP Pro SP2 installed on /sda1 and originally a 10.04 on /sdb1-3, now upgraded to 11.04. The Ubuntu system works fine (teething troubles with nvidia drivers on upgrade but fixed now), and the Windows system shows up in the grub menu, but when it's selected, I just get `GRUB Hard Disk Error' and nothing else. Windows installed properly, and booted successfully until I installed Ubuntu in the first place. I can still access the files on that drive from within Ubuntu.

I've tried fixboot in the Win Recovery Console, which sounded like it did something, but didn't fix the problem. This problem isn't new to grub2, by the way - I just haven't needed Windows in a year.

View 9 Replies View Related

Debian Installation :: No Dual Boot - Error: No Such Device And The Grub Rescue> Prompt

Jan 18, 2011

I had Ubuntu installed, i installed Debian and there was no dual boot. So i formated all the hard disk to install only Debian. It installed but at boot i get error: no such device and the grub rescue> prompt. i googled for a solution and nothing worked:

- i tryed reinstalling grub, not worked
- i did the windows cd fixmbr trick, not worked
- reinstalled debian with fixmbr the first step and nothing
- tryed deleting with dd the mbr, not worked
- reinstalled grub from debian rescue, not worked

what should i do? i can't access my computer? please tell me how should i fix it? the google guys will kill me because i put their servers on fire

View 14 Replies View Related

Ubuntu Installation :: Boot/grub/win7 - Testdisk/update-grub Method, But It Didn't Work?

Mar 4, 2011

I have 2 hard disks. sda,sdb

In sda, I have 4 partitions, and I have windows 7 in one of the extended partitions [not in the primary partition].

In sdb, I have 3 partitions. 2 for storage, and 1 10GB drive for Ubuntu. Again, Ubuntu is not of a primary partition.

I had ubuntu 10.04 running on that for a long time. However, I wanted to reinstall ubuntu and use 10.10.This is what I did EXACTLY:Booted from Ubuntu install CD

Chose advanced istall

Selected sdb3 for Ubuntu

I installed GRUB2 on the SAME partition as Ubuntu aka sdb3 Installed then rebooted

I can boot into Ubuntu fine, but whenever I select Windows 7 bootloader from the GRUB menu, the screen goes black, and my PC reboots.

Boot Info:

Code:
Boot Info Script 0.55 dated February 15th, 2010 [code]....

ls: reading directory sda6/: Input/output error

I have tried the testdisk/update-grub method, but it didn't work.

View 9 Replies View Related

Ubuntu Installation :: Dual Boot With Win7 - Bitlocker And TPM - Without The Usb-stick The Pc Won't Boot

Oct 18, 2010

I have searched and read threads about the Bitlocker, grub and TPM issues that might show up, but I can't draw any conclusions as some information contradict each other. To make sure I don't screw up my pc as thought I need to make a new post.

At work I'm supposed to run Windows 7 and encrypt the win-partition with Bitlocker. I have installed Windows, turned on the encryption and it ties into the TPM. But as I am moving over to the *nix department I want to run Ubuntu as dual boot to check everything rusn fine with all the systems I need. Before I installed Windows I partioned the disk:

1,5 GB for system/bitlocker requirement
147 GB for Windows, C:
85 GB which is empty where I intend to install Ubuntu (not formated yet)

I boot into Windows with my bitlocker/TPM key on an USB-stick. Without the usb-stick the pc won't boot. Now, before I try to install Ubuntu I want to make sure to do it the right so I don't mess up the Windows installation or won't be able to boot the pc at all.

There seem to be several "schools" to this. Some suggest I should have installed Ubuntu first, then Windows and then encrypt. Some say, no worries just fire away and install since you are not planning to read the windows-partition from Ubuntu. Or an alternative, install but make sure to deactive the encryption during installation. Some say, install but make sure grub is installed in (multiple choices) location.

View 9 Replies View Related

Ubuntu Installation :: Lucid: Restoring Grub2 (dual Boot) - Error "error File Not Found Grub Rescue"

Apr 30, 2010

After upgrading to 10.04 from 9.10 Win7 wouldn't startup any more. So I tried this HowTo: [URL] to restore Grub2. But now each time I boot up I get this two lines: error file not found grub rescue> I have NO idea what to do.

[Code]...

View 9 Replies View Related

Ubuntu Installation :: Dual Boot - Win7 Not Being Able To Boot Anymore

Apr 29, 2011

So we install Windows 7 home premium. Then in goes the Ubuntu Disk. Ubuntu seems to think that the windows 7 partition is one big lump of unallocated space. Tried multiple re-installs of Windows 7, all concluding the same. A bit of googling told me that it has something to do with partition tables or something. I even tried to use Gdisk to delete Gpt from the windows disk, which - as I have absolutely no idea what any of it means, - resulted in me screwing up the entire Win7 partition hence win7 not being able to boot anymore.

i've seen on the internet include a lot of technical garble which I don't understand. I've been using Linux for a while, but as far as partitioning and dual booting is concerned, it's always gone smoothly for me up until now

View 1 Replies View Related

Fedora Installation :: Dual Boot With Xp - Grub Can't Boot Into Windows?

Jan 10, 2010

I just set up a dual boot on a system with fedora 12 and XP. XP in on one hard drive (sda) and Fedora on a second hard drive (sdb).

I installed grub on the Fedora disk so as to not touch the windows disk at all.

Prior to installation, in the bios, I set the Fedora disk (sdb) first in the boot sequence, and then XP (sda) so that the grub loader would boot up by default. (If I set the windows drive first then the system bypasses grub and loads straight into windows.)

My system can now boot up into Fedora fine, but if I select windows from the grub loader menu I just get a blinking cursor - windows will not boot.What do I have to do so that grub can boot into XP?

View 7 Replies View Related

Ubuntu Installation :: Set A Dual Boot With Win7?

Jan 13, 2010

I bought a new computer (laptop HP DV6-1375dx) and I want to set a dual boot with win7, like I did with my desktop (clean install) However, my question is, with the new laptop all I have is the rescue disks vs. having the single OEM version. IS that a problem? for the desktop I followed lifehackers article "Dual boot win7 and ubuntu in perfect harmony." no problems at all.

what I am afraid of is formatting the new hard drive and the recovery partition and not being able to use the disks for some reason....am I over-reacting?

View 9 Replies View Related

Ubuntu Installation :: Dual Boot 10.10 And Win7?

Feb 11, 2011

I've tried this a couple of times and can't load Ubuntu.Here's the scenerio, I have 3 partitions.

/dev/sda1 = ntfs (Win7)
/dev/sda2 = ext4 with the / mount point
/dev/sda3 = swap space

I've some tutorials where I need a /boot partition as well and others where I just need the root partition. At the bottom, there is a drop down box for you to select the device for boot loader installation. Those options include /dev/sda, /dev/sda1 (Win7) and /dev/sda2.

I need to do to get the dual boot working? My first thought is to install the boot loader onto /dev/sda but I'm unsure. It keeps booting Win7 and can't get the option to load Ubuntu.

View 1 Replies View Related

Red Hat / Fedora :: 14 And Win7 Dual Boot?

Nov 8, 2010

I install Fedora 14 32bits the same way I install Ubuntu. First, make unallocated space for it (about 150Gb). During the installation setup, I select "use all continuous free pace" as partition option, coz it's fastest and easiest. /dev/sda/ is selected as location for boot loader, and leaves Fedora as default boot target. Installation process goes very smoothly, but when the system restarts. The computer boots up as if Fedora has never been installed, it goes straight to Windows7, No GRUB boot loader menu whatsoever.

troubleshooting attempt #1: at first I thought it maybe the GRUB compatibility issue between 32bits Fedora and 64bits Win7. So I tried out 64bits Fedora, doesn't work.troubleshooting attempt #2: then I tried to install the boot loader on the Linux partition (first boot sector of boot partition) and let Windows 7 controls the startup menu by using FreeBCD.

View 6 Replies View Related

Ubuntu Installation :: Dual Boot - Can't Boot Win7

Nov 16, 2010

I've installed Ubuntu 10.10 (64bit) next to my Windows 7, in SSD hard drive. I'm able to boot Ubuntu with no problem, but my problem is my Windows. When I try to enter windows 7, all I get is a black screen with one blink char, and from there it does nothing...

My PC:

cpu i5 760
4gb ram
mb gigabyte GA-P55A-UD3
gpu gainward nvidia gtx 460

View 1 Replies View Related

Ubuntu Installation :: Will Not Boot - Dual Boot Win7 And 10.04

Mar 21, 2011

I have the option of selecting between win7 and Ubuntu during start up, but when i select Ubuntu it goes to the first 2 lines of command and then restarts again. Windows 7 works fine. This is the second installation of ubuntu on this computer, the first attempt did the same thing (would not boot into ubuntu but win was fine) after i lost power. This time i shut the computer off for a full week while i was on vacation. I have switched between windows and ubuntu a couple of times and had no issue with this installation.

HP Pavilion
AMD AthalonII X4
8GB ram
1TB HD
AMD HD 4550

64-bit windows 7
wubi
Ubuntu 10.04LTS 64-bit

All stock and at cool temperatures.

View 2 Replies View Related

Ubuntu Installation :: Win7 Is Not Working On Dual Boot?

Jan 21, 2010

I used to have a win7 hp laptop. I decided to use ubuntu9.10. i installed it to my second drive (d after shrinking of c: drive to 100 gb. After installation of ubuntu, i try to boot win7 from grub screen, it goes to blue screen and restarting, not opening. But when i choose ubuntu, it is working properly. When i try to repair it, the win7 cd does not see any drive, only its x drive (where it boots). how can i start my win7 again. I am working on this 2 days.

============================ Boot Info Summary: ==============================
=> Grub 1.97 is installed in the MBR of /dev/sda and looks on the same drive in partition #4 for /boot/grub.
=> Syslinux is installed in the MBR of /dev/sdb

[Code]....

View 3 Replies View Related

Ubuntu Installation :: Dual Boot Win7 And 10.04 - Unstable

May 24, 2010

Does ANYONE have a stable dual boot Win7 & Ubuntu 10.04 system? I have been trying for WEEKS to get a computer configured for my student lab. I get things going and everything seems to work for a few days. And then for no reason, the next time I reboot, Grub just seems to commit suicide.

Latest example. Win 7 & Ubuntu have been co-existing perfectly fine for about a week. Iow, I do something, then reboot, and the grub menu comes up - I select something and it boots my OS of choice for that session.


But today, I've been putting the last few touches on this computer before I use Clonezilla to copy it to all of the computers in the lab. You know - hard stuff like:

* set the default profile in Windows

* install a printer in both Ubuntu & Windows

* set a background image for the logon screens that have our "don't do anything bad" policy.

how there is nothing in there that should mess w/ grub or the boot loader, right? Yet I reboot the computer, I get to where grub should load - and BARF - I get the Bios splash screen again and the computer reboots on it's own. What the !@(#$&!@#$% is going on that this keeps happening to begin with?

View 2 Replies View Related

Ubuntu Installation :: Dual Boot Win7 And 10.0.4 With RAID 0

Jul 31, 2010

I was trying to dual boot ubuntu on my desktop which has windows 7 already installed on it with raid 0. I have 2 500GB hard drive and when I boot from cd and try to install ubuntu it only detect one of my hard drives and it said I only have 500GB and there is no OS installed on this machine! I look online but I couldn't find any solution!

View 9 Replies View Related

Ubuntu Installation :: Upgrade Dual Boot From XP To Win7 HP

Dec 21, 2010

Current set-up:
Athlon 64 2800
2 GB RAM
340 GB on two HDD
Ubuntu 10.04 LTS
Win XP Pro SP3

After getting the Silver Ghost all set up and purring like a kitten for my daughter, she now informs me she'd rather have Win7 HP instead of Win XP Pro SP3. Ubuntu and Win XP Pro are on separate HDD. Can I do a "clean install" of Win 7 HP on the Windows drive without screwing up GRUB? Or will I need to do the dance described at [URL]. I've had to modify Ubuntu because of conflicts between 10.04 and the Ralink 2780 (?) wireless-n drivers.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved