I have dahdi installed. And a wildcard card:
pci:0000:04:07.0 wcfxo-1057:5608 Wildcard X100P
modprobe dahdi returns: "FATAL: Module dahdi not found."
and dahdi_genconf finds no spans.
I have commented out the following line in /etc/modprobe.d/dahdi.blacklist.conf:
"#blacklist wcfxo", which I believe corresponds to the appropriate module.
However modprobe wcfxo indiates that module is not found. I have an up to date fc15 installation.
I generally check what updates are being installed. This time sadly I didn't and again this kernel had one missing module. VirtualBox-OSE stopped working. It had been working fine with other upgrades. No it's not a problem with dkms or other stuff. This kernel doesn't have vboxdrv module like other kernels...i verified it...
The 184.108.40.206 version doesn't have vboxdrv module!....hence again I have to roll back to older kernel. So before blindly upgrading....read this message!
Tried on two computers, one laptop, one desktop. Downloaded DVD iso image and burned to DVD. Booted from CD and boot loader appears, and started count down. After the count down finished, nothing happen. Then I downloaded the netinstall image and repeat the procedure but with exact same result, nothing happened after the count down.I tested the download iso by installing it to a VMware VM, and installation completed. I don't even know where to start trouble shooting The only thing common between the two machine is the Nvidia graphic chip.
After doing an upgrade from FC14 to FC15, I then updated the packages by doing: yum update yum yum clean all yum --releasever=15 --disableplugin=presto distro-sync I then get the following voluminous list of issues (148 pre-existing rpmdb problems). I've done an rpm --rebuilddb but no help.
Running rpm_check_debug ERROR with rpm_check_debug vs depsolve: libclutter-gtk-0.10.so.0()(64bit) is needed by gthumb-2.12.3-2.fc15.x86_64 Please report this error in [URL]
Found 148 pre-existing rpmdb problem(s), 'yum check' output follows: ImageMagick-c++-220.127.116.11-15.fc14.x86_64 has missing requires of ImageMagick = ('0', '18.104.22.168', '15.fc14') akonadi-1.5.3-1.fc14.x86_64 has missing requires of libboost_program_options-mt.so.1.44.0()(64bit) alchemist-1.0.37-8.fc12.x86_64 has missing requires of python(abi) = ('0', '2.6', None) ..... Your transaction was saved, rerun it with: yum load-transaction /tmp/yum_save_tx-2011-05-27-10-30qO4br9.yumtx
Well, it appears that downloading and installing libclutter-gtk-0.10.so.0 seemed to fix all the subsequent yum error messages, and I was able to install all the packages.
After installing FC15 on my computer, I cannot boot on my windows7 due to an error 18. I installed FC on 2 new partitions I created during the installation, so I guess they moved before my window's.Is there a solution to fix this without erasing my windows partition? (at worse, I'm ok with deleting my linux partitions for I haven't done anything with it yet).
I upgraded Sunday evening from FC14 to FC15 using the yum preupgrade method. Services such as httpd, vsftpd, sshd, named and even the VNC server are all running. I can connect via VNC client and get a downgraded gnome desktop, but from the console, I cannot start X or gnome desktop.I have searched many threads over the last day+ and found many references to problems with nVidia drivers - and I have a nVidia adapter. but I am not sure what is next to do and need a lead.
I installed a fresh live CD version of Fedora 15 which has that new Unity desktop, but I also want the option of booting to the old gnome classic desktop session. So can I add that with the package manager, or just use terminal with yum install ?
following mjmwired instructions, I manually setup the sudo but I keep getting a parse error whenever sudo command is run. How do I fix this issue?I login as su -, then setup sudo using "echo 'myusername ALL=(ALL) ALL' >> /etc/sudoers". All appears OK. I exit su, and go back to myusername.
I am using SAMSUN R-519 laptop with 4 GB RAM and 2.1 GHz dual core CPU and I intend to configure asterisk on this machine for voice conferencing with 4 other PCs. I am unable to configure asterisk. I don't have any hardware regarding voip such as Digium card.
I am quite new to centos as I am from a windows back ground and trying to change over. I am trying to install Asterisk on a dell quadcore server running centos. I need to install Dahdi for hardware support but when I try to install it I get the following error You do not appear to have the sources for the 2.6.18-164.6.1.el5 kernel installed I don't have a clue
Recently installed FC15 XFCE on my new hard drive in my laptop, bring it home from work and it wont boot up.
Only changes I made at work were removing the standard package manager, replacing it with yumex, and slightly changing the panels to more suit how I like to work. Other than that just a little browsing the web on work's wireless connection.
Now it will not boot at all. Pressing Ctrl+Alt+2 and the last command I see is "Started SYSV: Late init script for live image.."
Tried booting into the original kernel (rather than the updated one from when I first installed) and the writing is smaller so I can see an earlier message where it failed a process. This is relating to akmod_nvidia but I installed that a couple of days ago and have restarted a few times since without problems before.
"Starting LSB: Builds and install new kmods from akmod package failed, see 'systemct1 status akmods'service' for more details"
I do not even get a command like where I can type with Ctrl+Alt+2 to try running anything.
I tried adding "runlevel=3" to the end of the kernel line in Grub. Is that the correct way to try and force into command line?
This borders on stackoverflow/superuser, but I guess it's a simple installation problem.I've installed python-twisted on my ubuntu 10.04 server, but it can't be found.This is what I get when I try to import something:
>>> from twisted.internet import reactor Traceback (most recent call last): File "", line 1, in [code]....
I've installed the package through apt-get.That way the module is installed in this folder: /usr/lib/python2.6/dist-packages/twisted with an __init__.py file.When I try to use python setup.py install (on the download from the site) it installs it to /usr/local/lib/python2.6/dist-packages/twisted, but it also does not find it there.
I'm going to remove Gnome3 from FC15 and, possibly, install KDE. I'm not sure about the options I have for it:I saw I can remove just the gnome-shell package. This makes me wonder if it is possible to replace the gnome-shell functionality with a gnome-2 equivalent, getting some of the gnome2 back how much of gnome-related packages can I remove? For example, is it advisable to remove gdm in favour of kdm? Are there gtk/gnome programs that are "better" than kde equivalents and are thus best left untouched, along with their dependencies? finally, somewhat unrelated, do you know good tutorials for gnome2.X expatriates to learn modern kde?
I recently installed FC15. When I try to execute a binary file, it shows permission denied message even when I login with the root user through "su -" command. It also give me the same message when I try to run a python script. How can I execute binaries in FC15?
where can i put the request for the [ FC15] build of:
dependencies for po-debconf:
Code: perl(Debconf::AutoSelect) is needed by po-debconf-1.0.16-5.fc15.noarch perl(Debconf::Config) is needed by po-debconf-1.0.16-5.fc15.noarch perl(Debconf::Db) is needed by po-debconf-1.0.16-5.fc15.noarch perl(Debconf::Template::Transient) is needed by po-debconf-1.0.16-5.fc15.noarch
I currently have an FC15 KDE, set up as I like it as a media server, and with squeezeboxserver (for Logitechs media system) running fine. But I'd like to set it up as headless - and it presently needs to have a monitor attached. No keyboard or mouse and it will boot to the login screen (so not a BIOS issue). I need to get it to boot without needing a monitor or requiring a graphical log in. I can administer via SSH and Squeezebox server puts up a webpage. FC15 doesn't use inittab any more, so changing run levels is fraught. I don't want to play with targets without a safety line ...
i just installed fc15 on a virtual machine and since i wanted to learn how to configure it manually, i chose minimal installation. i have referring the deployment guide, now im trying to configure the network interface. what are the steps i have to follow when i install a new network interface manually? no GUI tools are available here because of the minimal installation. im stucked
I have used preupgrade to moved from fc14 to fc15. With fc14 I had my two usb 3.0 ports working. However, with fc15 my usb 3.0 ports are disabled. I have read the instruction at the common fc15 bugs doc and removed the kernel parameter xhci.enable=1 and also erased the file /etc/pm/config.d/xhci. Still the usb 3.0 ports are not working. I am using kernel 22.214.171.124-26.rc1.fc15.x86_64. I cannot use the 126.96.36.199-27.fc15.x86_64 since there no nvidia drivers for it.