Fedora Installation :: F13 Install Freezes When Checking For Dependencies

Sep 1, 2010

Installing from a CD, and F13 constantly freezes at the same spot - "Checking dependencies in packages selected for installation" - gets stuck 1/3 to 1/2 thru.

Dell Dimension 2400, Celeron 2.4GHz, 768MB memory, 120GB drive.

I've used same CD set to install several other systems so CDs are good.

View 9 Replies


Fedora Installation :: Fc11 Install Hangs At Checking Dependencies / Fix It?

Jun 11, 2009

I am trying to install fc11 on an intel mb with pentium4 and ati graphics
the install always hangs at the point where the sw packages have been selected
and the install is checking dependencies.

I have tried the regular install
the basic video install, and text install
with the same symptoms each time

the dvd drive lite is on and the hard disk activity lite is on and the system is frozen.
have to power off.

I have fc11 installed on another system (amd) and had install issues also but that was
with the preview.

View 1 Replies View Related

Fedora :: System Freezes After Checking Media During Installation

May 27, 2011

I tried installing F14 and F15 but display resulted in freezing. The display would work upto "Check Media/Skip Test" for media during installation and the system freezes immediately after that. So I did a VNC installation from another system. But the initiation of X would always result in hanging of the box. After googling and trying various solutions, I found a ray of hope in one solution which suggested adding "vesafb:mtrr,ywrap vga=0x318" to the kernel arguments. This resulted in displaying successfully the boot-time flash (Fedora logo being filled with white color) during booting. But "startx" or "inittab 5" result in hanging of the system.

The following is the relevant information:
I see 5 monitors and 5 cards!

# lspci | grep ATI
09:0c.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
09:0d.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)

# cat /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
Screen 2 "Screen2" RightOf "Screen1"
Screen 3 "Screen3" RightOf "Screen2"
Screen 4 "Screen4" RightOf "Screen3"
Screen 5 "Screen5" RightOf "Screen4"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection .....

View 2 Replies View Related

Ubuntu Installation :: Upgrade 10.04 -10.10 Freezes On Reboot - Checking Non-existent Battery

Oct 11, 2010

I did normal net upgrade after the official release of 10.10 yesterday evening. On reboot I get a frozen system with a blank screen. Checking via safemode, I find it is stuck when 'checking battery state' but this is a desktop machine! Apt update, uninstalling ubuntu-desktop, reinstalling ubuntu-desktop, etc.

View 9 Replies View Related

Slackware :: Checking - And Finding The Source For Dependencies ?

Nov 23, 2010

I'm looking to install, and perhaps create a SlackBuild) for an application that I think might be interesting.

The dependencies listed are:

libx11-dev, libxt-dev, libimlib2-dev, giblib-dev, and libxinerama-dev

I've checked to see if the packages are installed w/:


I've also looked for any existing SlackBuilds, but the only one that showed up in the database is: "giblib"

Where can I look to find these dependencies, their sources, or determine whether they're already installed in Slackware64 13.1?

Also, how would one determine if this can compile for a 64bit, non multi-lib install?

View 3 Replies View Related

Fedora Installation :: Downloaded The All Neded Dependencies And .rpm Files, But Cant Install Them?

Mar 8, 2011

A game I found recently through an web repository. Downloaded the all neded dependencies and .rpm files, but cant install them.. terminal output below:'

[root@localhost Downloads]# yum localinstall luola-1.3.2-2.fc6.rf.i386.rpm luola-levels-1.3.2-1.0.rf.noarch.rpm luola-debuginfo-1.3.2-2.fc3.rf.i386.rpm


View 2 Replies View Related

Fedora Installation :: Can't Install F10 - Freezes

May 5, 2009

I've tried this a couple different ways and I can't get it to work. Whenever I try to install from my F10 DVD, I get to the part where it asks if I want English or some other language. After I pick English and click Next, everything goes black except for my mouse which is frozen.

Primary boot drive is blank, secondary has Win7
Using F10 x86_64 DVD

View 4 Replies View Related

Ubuntu :: Upgraded To 11.04 - Freezes On Checking Battery State

May 1, 2011

I upgraded to 11.04 yesterday but when I try to run it now it freezes on checking battery state. I've did some looking in the forums and found this post. [URL] Which in turn pointed me to this page. [URL] I have an ATI Radeon 5450 so I went through the steps for Need to fully remove -fglrx and reinstall -ati from scratch

Now, when I try to start up the screen just goes blank as if I've turned the computer off. I can run the system in limited graphics mode (or whatever it's called) so I have the ability to do some troubleshooting there, but I'm a Windows convert and am pretty hazy as far as Ubuntu troubleshooting goes

View 5 Replies View Related

Fedora Installation :: Checking For Libraries Currently In Use?

Jul 19, 2010

I have just installed from the Live Cd (Fedora 13). So far so good except that I have just installed the updates (which has taken some time) .

The updater screen shows a full progress bar and next to the progress bar is this text " checking for libraries currently in use" this has been at least one hour showing the same thing, it hasn't changed (PC is still running OK). Does this mean I can safely quit and the updates will be OK or should I keep waiting for a reboot screen or updates success message ? Is this normal, if so how long does it usually take to complete?

View 1 Replies View Related

Ubuntu Installation :: Install .deb Offline With All Dependencies?

May 3, 2010

I was able to do this before but, I can't remember where I found the link.I think is was a script or something. It would get all the files that the .Deb will need and make an installer.

P.S. I have Ubuntu 64-bit the PC that need the install is a 32-bit both are 10.04.

View 1 Replies View Related

Ubuntu Installation :: Apt-get Refuses To Install Dependencies?

Oct 15, 2010

I'm running Kubuntu 10.10 and am trying to change my bootscreen so I installed StartUp-Manager and then I tried to install usplash, but I get this error which makes me slightly confused:

sudo apt-get install usplash
Reading package lists... Done
Building dependency tree
Reading state information... Done


Previously apt-get has been happy to install dependencies. I'm new to Linux so if you need any more information just shout and I'll edit that in.

View 2 Replies View Related

Ubuntu Installation :: How To Install Complete GCC / G++ And Dependencies

Nov 6, 2010

When I visit packages.ubuntu site, I see dapper, maverick etc. What are these? Also I need to install complete gcc, g++ and dependencies. How to do it?

View 2 Replies View Related

Fedora :: How To Install Dependencies For Mediainfo

May 31, 2010

When I run the rpm package to install mediainfo software I get this warning: mediainfo-gui-0.7.33-1.i386.Fedora_12.rpm: Header V3 DSA signature: NOKEY, key ID dfb2ef23

error: Failed dependencies:
libmediainfo.so.0 is needed by mediainfo-gui-0.7.33-4.1.i386
libmediainfo0 >= 0.7.33 is needed by mediainfo-gui-0.7.33-4.1.i386
libzen.so.0 is needed by mediainfo-gui-0.7.33-4.1.i386
libzen0 >= 0.4.14 is needed by mediainfo-gui-0.7.33-4.1.i386

and I have no idea of how to go on..it asks for elevated prompt but is not able to retrieve dependencies by itself..

View 3 Replies View Related

Ubuntu Installation :: Update Packages / Install New Ones With Their Dependencies

Dec 6, 2010

I'd like to update /etc/apt/sources.list with all the packages available on packages.debian.org and packages.ubuntu.com without apt-get, aptitude, and synaptic then trashing my system by trying to update all the obsolete packages. (I'm stuck with 8.04) I only want to update the packages / install new ones with their dependencies as I request them. How do I do that?

View 9 Replies View Related

Ubuntu Installation :: Ktorrent Dependencies Broken - Cannot Install

Apr 16, 2011

I have Ktorrent installed via the repositories and its always worked perfectly. Today I ran software update with KPackageKit and it installed updates. It told me that KTorrent had to be removed to continue and without thinking I hit ok. Now my KTorrent is gone. When I try to install it on the terminal with


sudo apt-get install ktorrent

it gives me this error.


$ sudo apt-get install ktorrent
Reading package lists... Done
Building dependency tree
Reading state information... Done


The following packages have unmet dependencies:

ktorrent : Depends: ktorrent-data (= 4.0.3-0ubuntu1) but 4.0.5-3ubuntu1~maverick1~ppa1 is to be installed

E: Broken packages If I remove and reinstall ktorrent-data it doesn't help. build-dep doesn't help. autoremove and then trying to reinstall doesn't help. I'm not running some strange dev version of anything. I have a standard Kubuntu 10.10 amd64 installation and my KDE version is 4.6.2 from the regular repositories. I run updates (standard repositories) almost every day and have never seen anything like this before.

View 8 Replies View Related

Fedora :: Vlc Rpm Installation Not - Dependencies?

Jun 16, 2010

i`m pretty new in Fedora 13 and linux as well. I installed a Fedora 13 xfce on an elder e series livebook.
Then I tried to install the rpm packages for vlc from ATrpms - by Distribution > Fedora 13 vlc-1.0.6-53.fc13.i686.rpm

could not do simulate: vlc-1.0.6-53.fc13.i686 requires libdca.so.0
vlc-1.0.6-53.fc13.i686 requires libavutil.so.50(LIBAVUTIL_50)
vlc-1.0.6-53.fc13.i686 requires libx264.so.92
vlc-1.0.6-53.fc13.i686 requires libfaad.so.2
vlc-1.0.6-53.fc13.i686 requires libavcodec.so.52


View 4 Replies View Related

Fedora :: Error With Dependencies While Trying To Install Programs With Yum

Jun 21, 2011

I've recently got this error coming up when I try to install things via yum through the terminal. It happens when I try to install *anything* at all. I'm running 32bit Fedora 14, although my laptop is 64 bit.

I think the error may have occurred a while back when trying to upgrade to fedora 15 running 64 bit, although I'm not sure exactly what I did then


I have tried running "rpm -Va --nofiles --nodigest" and I just get this error again.

View 6 Replies View Related

Fedora Installation :: Fed 7 To 8 Upgrd, Hangs At Dependancy Checking?

Feb 6, 2009

Whenever I get to the dependancy check, it gets up to 99% and appears hung. I am in text, not GUI. Any idea why or if I just need to wait longer? I waited about 1/2 hour. Also, on newer versions, there seems to be no text install option. I saw in the stickies there is this option, and I was wondering how to get to it? I hit the function keys to get different menus while installing fedora 10 on my laptops but just can find a place to type text. I'm no guru, but I've been around the block and I'm just faster at the old text way. Old fart you might

View 5 Replies View Related

Ubuntu Installation :: Pkg Install From A Folder Containing All Packages Including Dependencies?

May 22, 2011

i want to install package say PHP5 i have all the dependencies packages of php5 in a folder.or say i have all the packages in a folder and i want to install using dpkg

but when i try to install the main package it say these dependencies are missing.there are more than 40-50 packages so its not possible to install manully first one package and then another.eg:

bhupinder packages # dpkg -i apache2_2.2.17-1ubuntu1_i386.deb
(Reading database ... 140101 files and directories currently installed.)
Preparing to replace apache2 2.2.17-1ubuntu1 (using apache2_2.2.17-1ubuntu1_i386.deb) ...
Unpacking replacement apache2 ...


now i have to install rest of the package manually ...is there any solution so that i can install it with single command...???

View 1 Replies View Related

Fedora :: Getting Dependencies For Offline Installation?

Jul 30, 2010

Administering offline Linux boxes can be a serious pain. The Debian flavours now have keryx to make life easier. Keryx is a cross-platform application, which means one can get the dependencies from Windoze too. Is there any similar package for rpm/fedora based flavours? In the absense of a proper Offline manager, I was also wondering if there is a way to collect the output of:


yum deplist <package>

... condense or sieve out the double listings, and pipe that to a text file? One can copy the output and run


yum reinstall <paste them here> --downloadonly

and get all the required dependencies from the yum cache. If all that can be accommodated in one script... then that's pretty cool. I don't have the scripting know-how to dive into this.

View 5 Replies View Related

Fedora :: Failed Dependencies Error During Orkaudio Install

Nov 28, 2009

I'm running Fedora 11:
kernel Linux
Gnome: 2.26.3

Trying to install orkaudio using the instructions here: [URL]
When I get to rpm -i ACE-5.4.8-1.i386.rpm I get:
error: Failed dependencies:
libcrypto.so.4 is needed by ACE-5.4.8-1.i386
libssl.so.4 is needed by ACE-5.4.8-1.i386

I've also tried system/administration/add/remove software but no joy.
if I do # yum install openssl
I get:
Loaded plugins: refresh-packagekit
Setting up Install Process
Package openssl-0.9.8k-5.fc11.i686 already installed and latest version
Nothing to do

View 1 Replies View Related

Fedora :: Install The Wireshark-gnome Interface - Need Dependencies

Jul 10, 2011

When I try to install the wireshark-gnome interface I get a notice about needing two dependencies. One is portaudio and the other is the jack-audio-connection-kit. Seems like kind of odd dependencies for wireshark. Do wireshark really need them? VoIP related maybe?

View 6 Replies View Related

Software :: Cannot Install Dependencies For Cairo-dock (Fedora 11)?

Oct 4, 2009

I'm following this this tutorial, and everything goes perfectly fine up until the "Installez dependences (change XXXX)" part. The name of the file is cairo-dock-, and I swear I'm typing it in right, and I'm CDed in the proper directory. However, when I try to do that step, I get this output:Loaded plugins: refresh-packagekitwarning: rpmts_HdrFromFdno: Header V3 RSA/SHA256 signature: NOKEY, key ID 16ca1a56Error: Could not open cairo-dock- was a problem getting the build deps, exiting: Could not open local rpm file: cairo-dock- RPM Error opening Package

View 8 Replies View Related

Fedora Installation :: Removing Package With Dependencies?

May 9, 2010

How do most experienced Fedora users remove packages with large number of dependencies?

I know that the question is as old as yum, but still I can't find solution. There is package-cleanup tool, which supposed to do the job with "--leaves" key, but it doesn't seem to work. Right now I have F12 installed. I installed rosegarden with `yum install rosegarden`. Then I removed it with `yum remove rosegarden`. If I understand right, `package-cleanup --leaves` must show all of 12 dependencies that was installed with rosegarden, but it shows none of them (although it shows few packages). Is this a bug? For years I used Ubuntu and Debian and I was completely satisfied with apt.

View 7 Replies View Related

Fedora X86/64bit :: Skype Doesn't Install Dependencies On 12 X86_64

Jan 17, 2010

I'm trying to get skype to work on my new system. It seems to install, but trying to run it I get an error message naming a missing dependency. Searching for this with yum whatprovides and installing the result worked in one case, but for the next one, yum install <package containing missing item> returns a few errors of the form:

package <name-version>.fc12.x86_64 (which is newer than <package-version>.fc12.i686) is already installed Is there any way around this? I'd like to get skype working, but am having no luck at the moment. I'd prefer not to remove the .x86_64 packages if I can avoid it in case that breaks something else.

View 14 Replies View Related

Fedora :: Install The Mysqltcl Library - Failing Due To Missing Dependencies

Oct 14, 2010

I'm running FC11 on an Intel 686 server and would like to solicit some help. I'm writing an Expect script to discover our lab network and would like to insert the results into a mySQL database. I've installed Apache/PHP/mySQL via the LAMPP distribution. I've hit a brick wall, however, in trying to install the mysqltcl library. how to install the library. I have downloaded an RPM, but installatiojn is failing due to missing dependencies: libmysqlclient.so.10 and libmysqlclient_r.so.10. And I have no luck in locating and installing those.

View 1 Replies View Related

Fedora Installation :: 12 Mem=xxx - Install Freezes Right After The "probing EDD (edd=off) .... Ok" Comes Up

Nov 26, 2009

The Fedora 12 (64 bit) install freezes right after the "probing EDD (edd=off) .... ok" comes up. I have to do a hard reboot to get the system back. I am currently running Fedora 8 (64bit) and everything works fine. The Fedora 11 (64 bit) install runs. (I don't really want Fedora 11, so I didn't complete the install).
The Fedora 12 (32 bit) install runs. (I don't really want 32bit Fedora, so ...). The Fedora 12 (64 bit) install only runs if I add mem=xxx. (I would like to be on this version)

I'll be doing the full install soon, but what should I look for once I have it installed to figure out what the issue is? Why do I now have to pass the memory size when 8 and 11 seems to be able to figure that out? I have a dell optiplex 740 with 4Gb of ram. AMD Athlon x2 64bit processor.

View 2 Replies View Related

Install :: Suse Installation Freezes / What To Do?

Jun 21, 2010

Trying to install OpenSuse 11.2 on a machine which has run version 10.3 for ages. I am installing to completely separate hard disk drives from the existing Suse. Installation is from a DVD burned from a successful download.

All goes well until suddenly the whole thing freezes, mouse as well. This has happened twice. The first time it stopped with 532 packages still to install. The second tim it had installed all packages, and the froze at
"Installing kernel module dependencies" 53 percent, and
"Save configuration" 90 percent.

Each time I was installing to a different, unused, hard disk.

View 6 Replies View Related

Ubuntu Installation :: 9.10 Freezes When Trying To Install

Feb 16, 2010

I have a Sony Vaio PCG-K23 and when I try to perform any operation after booting it (EX: Try Ubuntu, Install Ubuntu, Check CD for Defects) it freezes.

View 5 Replies View Related

Ubuntu Installation :: Install Freezes / Do That From Lan?

Aug 28, 2010

Well, it's a weird problem.
I had an old desktop pc, and I downloaded and burned both Karmic and Lucid desktop and alternate ISOs. I installed the karmic alternate in that PC, and things went smoothly.

Now a friend of mine gave me his old Packard Bell Easynote R laptop. It has a centrino 1.6GHz mother, 1GB RAM and a 60GB disk. The GPU (Geforce Go 6200) overheats a lot, but I have lurked around and found out this is a common issue.
Well, so I installed Win XP, and recently I wanted to install xubuntu here as well.
Thing is, the desktop install freezes. It does nothing, I can't even use the Live CD.
The alternate install goes well until the proper install, and then starts complaining about missing files in the CD.

Two things: The CD is perfect, I just tried it on my other desptop PC and it goes well.
The laptop cd tray is well too, I install things all the time, and I tried to install a game after this happened, to try and see if it was this, but it appears to work just fine.

I don't know what could be causing this. And I don't know enough to change things at the install prompt (noacpi, thing like that, I don't know what they mean).

Has anyone experienced something like this? If so, is there a solution? I believe this laptop cannot boot from flash drive, in the boot menu I only have HD, CD-DVD, Floppy and LAN.

Another thing: If is a CD issue, is there a way to install this from LAN? (that is, using my other working PC to do this?)

View 6 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved